Characterization of Functional Ingredients Extracted with Ethanol Solvents from Ponkan (Citrus reticulata) By-Products Using the Microwave Vacuum Drying Method Combined with Ultrasound-Assisted Extraction.

For this study, microwave vacuum drying (MVD) was combined with ultrasound-assisted extraction to compare the effects of different ethanol volumes on ponkan extract and to evaluate the total phenolic content (TPC), total flavonoid content (TFC), and total ascorbic acid content (TAAC). High-performance liquid chromatography with photodiode array detection (HPLC-PDA) was used to analyze the flavanone contents and antioxidant activity of ponkan (Citrus reticulata) peels. The experimental results showed that the TPC and TFC increase with ethanol volume. Ethanol extraction (75%) showed significant advantages by increasing the TPC to 17.48 mg GAE/g (DW) and the TFC to 2.96 mg QE/g (DW) of ponkan extract and also exhibited the highest antioxidant activity. The TAAC improved along with increased water content. Water extraction showed the highest content (13.07 mg VitC/100 g, DW). The hesperidin content analyzed by HPLC-PDA was 102.95-622.57 mg/100 g (DW), which was the highest among the flavanones. Then, the ethanol insoluble residue extracts were taken from the pectin with four different solvents, evaluating TPC, TFC, and antioxidant activity. The TPC, TFC, and antioxidant capacity of pectin are significantly lower than those of the peels. Combining MVD and 75% ethanol with ultrasound-assisted extraction in the pre-treatment process can effectively eliminate polyphenols, flavonoids, and other compounds, thus enabling the extraction of high-methoxyl pectin. The total dietary fiber (TDF) content of MVD ponkan by-products was 25.83%. Ponkan by-products have the potential for the future development of functional foods and supplements.

Association of Untreated Pre-surgical Depression With Pain and Outcomes After Spinal Surgery.

STUDY DESIGN: Prospective Cohort Study. OBJECTIVE: Untreated pre-surgical depression may prolong post-surgical pain and hinder recovery. However, research on the impact of untreated pre-surgical depression on post-spinal surgery pain is lacking. Therefore, this study aimed to assess pre-surgical depression in patients and analyze its relationship with post-surgical pain and overall post-surgical outcomes. METHODS: We recruited 100 patients scheduled for lumbar spine surgery due to spondylolisthesis, degenerative lumbar disc diseases, and herniated lumbar disc diseases. Psychiatrists evaluated them for the final selection. We assessed the Beck Depression Inventory (BDI), Japanese Orthopaedic Association (JOA), Oswestry Disability Index (ODI), and EuroQoL 5 Dimensions (EQ-5D) scores, numerical back and leg pain scales, and medication dosage data collected before and at 6 weeks, 3 months, and 6 months after surgery. RESULTS: Ninety-one patients were included in this study; 40 and 51 were allocated to the control and depression groups, respectively. The pre- and post-surgical leg pain, back pain, and functional scores were not different. However, the depression group showed higher ODI and EQ-5D and lower JOA scores than the control group 3 months post-surgery. Partial correlation analysis revealed an inverse correlation between the JOA and BDI scores and a positive correlation between the EQ-5D and BDI scores at 3 months postoperatively. CONCLUSION: Untreated depression can prolong postoperative pain and hinder recovery. Detecting and treating depression in patients before spine surgery may improve their overall quality of life and functional recovery.

Development of Oleogel-Based Fat Replacer and Its Application in Pan Bread Making.

In recent years, the bakery industry has been exploring alternative fats to replace traditional solid fats. Shortening, a common baking ingredient, is produced through the hydrogenation of vegetable oils, resulting in high levels of saturated and trans fatty acids, despite its vegetable oil origin. The excessive consumption of these fats has been associated with negative health effects, including dyslipidemia and cardiovascular issues. Oleogels, incorporating hydroxypropyl methylcellulose (HPMC), xanthan gum (XG), and olive oil, were utilized to replace shortening in the production of white pan bread. The substitution of shortening with oleogel in the white pan bread preparation demonstrated potential reductions in saturated fat, trans fat, and the ratio of saturated fat to unsaturated fatty acids. Specifically, with the complete substitution of shortening with oleogel, saturated fatty acids decreased by 52.46% and trans fatty acids by 75.72%, with unsaturated fatty acids increasing by 57.18%. Our findings revealed no significant difference in volume between bread made with shortening and bread with up to 50% shortening substitution. Moreover, when compared to bread made with shortening and 50% oleogel substitution, no adverse effects on the quality characteristics of volume and expansion properties were observed, and the retrogradation rate was delayed. This study suggests that incorporating oleogels, formed with hydrocolloids such as HPMC and XG, to replace shortening in bread, in conjunction with traditional solid fats, provides positive effects on the quality and nutritional aspects of the bread compared to using oleogel alone. Through this study, we demonstrate the use of oleogels as a healthier alternative to shortening, without reducing the bread's quality, thus offering a practical solution to reduce unhealthy fats in bakery products.

Flexible Dry Electrode Based on a Wrinkled Surface That Uses Carbon Nanotube/Polymer Composites for Recording Electroencephalograms.

Electroencephalography (EEG) captures minute electrical signals emanating from the brain. These signals are vulnerable to interference from external noise and dynamic artifacts; hence, accurately recording such signals is challenging. Although dry electrodes are convenient, their signals are of limited quality; consequently, wet electrodes are predominantly used in EEG. Therefore, developing dry electrodes for accurately and stably recording EEG signals is crucial. In this study, we developed flexible dry electrodes using polydimethylsiloxane (PDMS)/carbon-nanotube (CNT) composites with isotropically wrinkled surfaces that effectively combine the advantages of wet and dry electrodes. Adjusting the PDMS crosslinker ratio led to good adhesion, resulting in a highly adhesive CNT/PDMS composite with a low Young's modulus that exhibited excellent electrical and mechanical properties owing to its ability to conformally contact skin. The isotropically wrinkled surface also effectively controls dynamic artifacts during EEG signal detection and ensures accurate signal analysis. The results of this study demonstrate that dry electrodes based on flexible CNT/PDMS composites and corrugated structures can outperform wet electrodes. The introduction of such electrodes is expected to enable the accurate analysis and monitoring of EEG signals in various scenarios, including clinical trials.

Production of fructooligosaccharide-containing bakery and sweet paste products using invertase.

This study investigated the production of bakery and sweet paste products containing the prebiotic fructooligosaccharide (FOS) using an in situ method with invertase. The FOS formation method was optimized for each product to ensure high quality and appropriate sweetness. The method effectively decreased the sugar content in the final product by 12.7-68.4% while maintaining quality. The FOS content was 3.8-4.8% in castella, 0.6-3.6% in sweet dough bread, and 7.5-8.5% in sweet chickpea paste. By contrast, the commercial method of adding FOS decreased product quality; castella product height decreased by 20.8%, and hardness increased by 79%. The specific volume of the sweet dough bread decreased by 17.4% and hardness increased by 59%. Therefore, we developed a commercially feasible method to efficiently utilize FOS in sugar-containing foods while maintaining their quality.

Risk of cardiovascular disease associated with long-term use of non-steroidal anti-inflammatory drugs in ankylosing spondylitis.

OBJECTIVE: To examine the risk of cardiovascular disease associated with long-term use of non-steroidal anti-inflammatory drugs (NSAIDs) in a large real-world ankylosing spondylitis (AS) cohort. METHODS: This nationwide population-based cohort study used data from the Korean National Health Insurance Database. Patients aged ≥18 years old who were newly diagnosed with AS without prior cardiovascular disease between January 2010 and December 2018 were included in this study. Controls without AS were randomly selected by age, sex, and index year. The primary outcome was cardiovascular disease, a composite outcome of ischemic heart disease, stroke, or congestive heart failure. Long-term use of NSAIDs was defined as use of NSAIDs for >365 cumulative defined daily doses. The association between long-term use of NSAIDs and incident cardiovascular disease was examined in both AS and non-AS populations. RESULTS: Among 19 775 patients with AS and 59 325 matched controls without AS, there were 1,663 and 4,308 incident cases of cardiovascular disease, showing an incidence of 16.9 and 13.8 per 1,000 person-years, respectively. Long-term use of NSAIDs was associated with increased risk of cardiovascular disease in non-AS controls (adjusted hazard ratio [aHR], 1.64; 95% CI, 1.48-1.82). In contrast, long-term use of NSAIDs did not increase the risk of cardiovascular disease in AS patients (aHR, 1.06; 95% CI, 0.94-1.20; adjusted for age, sex, socioeconomic status, body mass index, smoking status, hypertension, diabetes, hyperlipidemia, and tumor necrosis factor inhibitor use). CONCLUSION: Prolonged NSAID treatment in AS patients may not be as harmful as in the general population regarding cardiovascular risk.

Socioeconomic inequality of health-related quality of life in cancer survivors in South Korea.

BACKGROUND: We investigated the inequalities in health-related quality of life (HRQoL) among cancer survivors in Korea, focusing on income and education levels. The slope index of inequality (SII) and relative index of inequality (RII) were utilized to analyze these disparities. METHODS: Data from the Korea National Health and Nutrition Examination Survey (KNHANES) conducted between 2007 and 2021 was analyzed. The HRQoL was assessed using the EQ-5D questionnaire, which included five problem areas: mobility, self-care, usual activity, pain/discomfort, and anxiety/depression. Logistic regression was employed to calculate the odds ratios (ORs) for each education and income level, indicating the probability of reporting problems. Furthermore, the slope index of inequality (SII) and relative index of inequality (RII) were calculated to evaluate the inequalities in HRQoL. RESULTS: Among the 3396 cancer survivors, a considerable proportion reported pain/discomfort (29.6%) and mobility problems (21.1%). The logistic regression results demonstrated a higher likelihood of experiencing problems in all five EQ-5D items among individuals with lower income or education levels. Specifically, compared to the high-income group, the adjusted ORs for mobility problems were 2.19, 1.64, and 1.08 for the low, low-medium, and medium-high-income groups, respectively (p-value < 0.05). Notably, significant income inequalities in HRQoL problems were observed, with the greatest disparities seen in self-care and usual activity problems, as indicated by the SII and RII values. CONCLUSION: Socioeconomic disparities in HRQoL exist among cancer survivors in Korea, particularly related to income levels. Addressing the financial burdens of cancer treatment for individuals with low-income levels may help improve their HRQoL and mitigate these inequalities.

Superb Li-Ion Storage of Sn-Based Anode Assisted by Conductive Hybrid Buffering Matrix.

Although Sn has been intensively studied as one of the most promising anode materials to replace commercialized graphite, its cycling and rate performances are still unsatisfactory owing to the insufficient control of its large volume change during cycling and poor electrochemical kinetics. Herein, we propose a Sn-TiO2-C ternary composite as a promising anode material to overcome these limitations. The hybrid TiO2-C matrix synthesized via two-step high-energy ball milling effectively regulated the irreversible lithiation/delithiation of the active Sn electrode and facilitated Li-ion diffusion. At the appropriate C concentration, Sn-TiO2-C exhibited significantly enhanced cycling performance and rate capability compared with its counterparts (Sn-TiO2 and Sn-C). Sn-TiO2-C delivers good reversible specific capacities (669 mAh g-1 after 100 cycles at 200 mA g-1 and 651 mAh g-1 after 500 cycles at 500 mA g-1) and rate performance (446 mAh g-1 at 3000 mA g-1). The superiority of Sn-TiO2-C over Sn-TiO2 and Sn-C was corroborated with electrochemical impedance spectroscopy, which revealed faster Li-ion diffusion kinetics in the presence of the hybrid TiO2-C matrix than in the presence of TiO2 or C alone. Therefore, Sn-TiO2-C is a potential anode for next-generation Li-ion batteries.

Piezoresistive Effect of Conductive and Non-Conductive Fillers in Bi-Layer Hybrid CNT Composites under Extreme Strain.

Polymers mixed with conductive fillers hold significant potential for use in stretchable and wearable sensor devices. Enhancing the piezoresistive effect and mechanical stability is critical for these devices. To explore the changes in the electrical resistance under high strains, typically unachievable in single-layer composites, bi-layer structures were fabricated from carbon nanotubes (CNTs) and EcoFlex composites to see unobservable strain regions. Spherical types of non-conductive fillers composed of polystyrene and conductive filler, coated with Ni and Au on non-conductive fillers, were used as secondary fillers to improve the piezoresistive sensitivity of composites, and their respective impact on the conductive network was compared. The electrical and mechanical properties were examined in the static state to understand the impact of these secondary fillers. The changes in the electrical resistance under 100% and 300% tensile strain, and their dependence on the inherent electrical properties of the secondary fillers, were also investigated. Single-layer CNT composites proved incapable of withstanding 300% strain, whereas the bi-layer structures proved resilient. By implementing cyclic stretching tests, contrary to non-conductive fillers, reduced piezoresistive influence of the conductive secondary filler under extreme strain conditions could be observed.

The comparable efficacy of denosumab on bone mineral density in rheumatoid arthritis patients with postmenopausal osteoporosis: A retrospective case-control study.

Little is known about differences in the therapeutic efficacy of denosumab in subjects with and without rheumatoid arthritis (RA). This study compares the changes in bone mineral density (BMD) between RA patients and controls without RA who had been treated with denosumab for 2 years for postmenopausal osteoporosis. A total of 82 RA patients and 64 controls were enrolled, who were refractory to selective estrogen receptor modulators (SERMs) or bisphosphonates and completed the treatment of denosumab 60 mg for 2 years. The efficacy of denosumab in RA patients and controls was assessed using areal BMD (aBMD) and T-score of the lumbar spine, femur neck, and total hip. A general linear model with repeated measures analysis of variance was used to determine differences in aBMD and T-score between 2 study groups. No significant differences in percent changes in aBMD and T-scores by denosumab treatment for 2 years at the lumbar spine, femur neck, and total hip were evident between RA patients and controls (P > .05 of all), except T-score of the total hip (P = .034). Denosumab treatment equally increased aBMD at the lumbar spine and T-scores at the lumbar spine and total hip between RA patients and controls without statistical differences, but RA patients showed less improvement in aBMD at the femur neck (ptime*group = 0.032) and T-scores at the femur neck and total hip than controls (ptime*group = 0.004 of both). Changes in aBMD and T-scores after denosumab treatment in RA patients were not affected by previous use of bisphosphonates or SERMs. Differences of T-score at the femur neck among previous bisphosphonate users and aBMD and T-score at the femur neck and T-scores at the total hip were evident. This study revealed that 2 years of denosumab treatment in female RA patients achieved comparable efficacy on BMD to controls at the lumbar spine, but showed somewhat insufficient improvement at the femur neck and total hip.

Comparative effectiveness of JAK inhibitors and biologic disease-modifying antirheumatic drugs in patients with rheumatoid arthritis.

BACKGROUND/AIMS: We aimed to compare the effectiveness and safety of Janus kinase inhibitors (JAKi) vs. biologic disease- modifying antirheumatic drugs (bDMARD) in Korean patients with rheumatoid arthritis (RA) who had an inadequate response to conventional synthetic DMARDs. METHODS: A quasi-experimental, multi-center, prospective, non-randomized study was conducted to compare response rates between JAKi and bDMARDs in patients with RA naïve to targeted therapy. An interim analysis was performed to estimate the proportion of patients achieving low disease activity (LDA) based on disease activity score (DAS)-28- erythroid sedimentation rate (ESR) (DAS28-ESR) at 24 weeks after treatment initiation and to evaluate the development of adverse events (AEs). RESULTS: Among 506 patients enrolled from 17 institutions between April 2020 and August 2022, 346 (196 JAKi group and 150 bDMARD group) were included in the analysis. After 24 weeks of treatment, 49.0% of JAKi users and 48.7% of bDMARD users achieved LDA (p = 0.954). DAS28-ESR remission rates were also comparable between JAKi and bDMARD users (30.1% and 31.3%, respectively; p = 0.806). The frequency of AEs reported in the JAKi group was numerically higher than that in the bDMARDs group, but the frequencies of serious and severe AEs were comparable between the groups. CONCLUSION: Our interim findings reveal JAKi have comparable effectiveness and safety to bDMARDs at 24 weeks after treatment initiation.

The Structure of Maltooctaose-Bound Escherichia coli Branching Enzyme Suggests a Mechanism for Donor Chain Specificity.

Glycogen is the primary storage polysaccharide in bacteria and animals. It is a glucose polymer linked by α-1,4 glucose linkages and branched via α-1,6-linkages, with the latter reaction catalyzed by branching enzymes. Both the length and dispensation of these branches are critical in defining the structure, density, and relative bioavailability of the storage polysaccharide. Key to this is the specificity of branching enzymes because they define branch length. Herein, we report the crystal structure of the maltooctaose-bound branching enzyme from the enterobacteria E. coli. The structure identifies three new malto-oligosaccharide binding sites and confirms oligosaccharide binding in seven others, bringing the total number of oligosaccharide binding sites to twelve. In addition, the structure shows distinctly different binding in previously identified site I, with a substantially longer glucan chain ordered in the binding site. Using the donor oligosaccharide chain-bound Cyanothece branching enzyme structure as a guide, binding site I was identified as the likely binding surface for the extended donor chains that the E. coli branching enzyme is known to transfer. Furthermore, the structure suggests that analogous loops in branching enzymes from a diversity of organisms are responsible for branch chain length specificity. Together, these results suggest a possible mechanism for transfer chain specificity involving some of these surface binding sites.

Effects of tomato ketchup and tomato paste extract on hepatic lipid accumulation and adipogenesis.

Tomatoes include high levels of lycopene, which is a potent antioxidative, hypolipidemic, and antidiabetic phytochemical. The intake of lycopene is associated with a reduced risk of insulin resistance and metabolic syndrome. The aim of this study was to investigate whether tomato ketchup and tomato paste, major dietary sources for tomato and lycopene, could regulate hepatic lipid metabolism and adipogenesis. To investigate the regulatory effects of tomato ketchup and tomato paste, we prepared a tomato ketchup extract (TKE) and a tomato paste extract (TPE) in 80% (v/v) ethyl acetate for the experiment. TKE and TPE reduced lipid accumulation and key markers for gluconeogenesis and induced a higher rate of fatty acid oxidation in HepG2 hepatocytes. In 3T3-L1 adipocytes, TKE and TPE increased adipogenesis and intracellular triglyceride accumulation, and stimulated glucose uptake. Peroxisome proliferator-activated receptor alpha and gamma expression levels were increased by TKE and TPE treatment. A single oral dose of tomato ketchup and tomato paste (9.28 g/kg) significantly improved glucose and insulin tolerance in mice. These findings suggest that lycopene-containing tomato ketchup and tomato paste may have beneficial regulatory effects in terms of energy metabolism in hepatocytes and adipocytes, and thus may improve blood glucose metabolism.

Soft Multifunctional Porous Sponge Sensor for Pressure and Strain Using Liquid Metal/Polydimethylsiloxane with Silver-Nanowire-Coated Composite.

Compression and tension sensors with a porous structure have attracted attention recently. Porous sponge sensors have the advantage of a wide deformation range owing to their structural characteristics. In this study, a porous sponge structure was prepared by absorbing polydimethylsiloxane (PDMS) into the matrix of porous commercial sugar cubes. A conductive network was formed by coating the outside of the sponge skeleton with silver nanowires (AgNWs), which have a high aspect ratio. In addition, a liquid metal (LM), which does not directly form an electrical network but changes from zero-dimensional to one-dimensional under an external force was introduced into this porous sponge structure. The effects of the LM on the sensor sensitivity to pressure and strain were analyzed by comparing the electrical resistance changes of PDMS/AgNW and LM/PDMS/AgNW sponge sensors under tension and pressure. This study shows that the use of a porous structure and an LM may be useful for future wearable sensor design.

Comparative Study of Carbon Nanotube Composites as Capacitive and Piezoresistive Pressure Sensors under Varying Conditions.

Conducting polymer composites consisting of carbon nanotubes (CNTs) as a conductive filler and polydimethylsiloxane (PDMS) as a polymer matrix were fabricated to investigate their capacitive and piezoresistive effects as pressure sensors. The pressure-sensing behavior and mechanism of the composites were compared in terms of basic configuration with a parallel plate structure. Various sensing experiments, such as sensitivity, repeatability, hysteresis, and temperature dependence according to the working principle, were conducted with varying filler contents. The hysteresis and repeatability of the pressure-sensing properties were investigated using cyclic tensile tests. In addition, a temperature test was performed at selected temperatures to monitor the change in the resistance/capacitance.

Mouse feeding study and microbiome analysis of sourdough bread for evaluation of its health effects.

Sourdough bread fermented with yeast and lactic acid bacteria (LAB) is thought to have various beneficial health effects. However, its beneficial effects were not fully evaluated with in vivo mouse model. To evaluate these effects in vivo, a mouse feeding study and microbiome analysis of white bread containing 40% sourdough (WBS) and yeast-leavened white bread (WB) were performed. Although feed consumption and body weight increased with WBS, the glycemic index was reduced, suggesting a diabetes-lowering effect, probably due to the presence of dietary fiber and short-chain fatty acids (SCFA). In addition, a mineral absorption test showed that WBS increased magnesium absorption owing to phytate degradation during fermentation. Interestingly, WBS decreased total cholesterol and triglycerides, probably due to the dietary fiber and SCFA in LAB. In addition, the ratio of low- and high-density lipoprotein was decreased in WBS, implying potential risk reduction for cardiovascular disease. An immunomodulatory assay of WBS revealed that pro-inflammatory cytokines TNF-α and IL-6 were decreased, suggesting anti-inflammatory activity. Gluten degradation by fermentation and antioxidation activity of menaquinol/ubiquinol by gut microbiota also supported the anti-inflammatory activity of sourdough bread. Furthermore, some beneficial gut bacteria, including Akkermansia, Bifidobacterium, and Lactobacillus, were increased in WBS. In particular, Akkermansia has been associated with anti-inflammatory properties. Consequently, WBS has beneficial effects on health, including decreased glycemic index and cholesterol, increased mineral availability and absorption, anti-inflammatory properties, and establishment of healthy gut microbiota.

Design of a Smart Conducting Nanocomposite with an Extended Strain Sensing Range by Conjugating Hybrid Structures.

In recent years, flexible and wearable strain sensors, consisting of a polymer matrix and a conducting filler, have received extensive attention owing to their physical advantages, such as being lightweight, stretchable, and having the potential for application to complex forms. However, achieving a low hysteresis of the relative change in resistance, wide sensing range, and reduced plastic deformation is still challenging. To address these issues, in this study, we developed hybrid conducting composites with a wide range of sensing abilities and low hysteresis. The bi-layer composites, comprising a carbon nanotube (CNT) composite layer with reinforced/conducting properties, and a natural rubber-based layer with extreme strain properties, could effectively circumvent their limitations. Compared to single-layer CNT composites, the bi-layer structure could increase the tensile strain with reduced plastic deformation, resulting in the prevention of surface cracks on the CNT composite. In addition, it has the benefit of measuring a wider sensing range, which cannot be measured in a single-CNT composite system. A cyclic stretching/releasing test was performed to demonstrate that the strain sensor exhibited excellent reproducibility. Our results can function as a useful design guide for stretchable sensor applications.

Impact of a pharmaceutical care service for patients with rheumatoid arthritis using a customised mobile device (the PROUD trial): study protocol for a randomised controlled trial.

INTRODUCTION: Rheumatoid arthritis (RA) generally requires lifelong treatment; however, its medication complexity might affect non-adherence. Pharmacist-led telehealth services were as effective as face-to-face services and reduced potential side effects in outpatients with chronic diseases. This study aims to analyse the effect of a telepharmacy service with a customised mobile device in comparison with the usual pharmacist service on the humanistic and clinical outcomes in patients with RA. METHODS AND ANALYSIS: The study is designed as a prospective, randomised, open-label, and controlled trial to compare the humanistic and clinical outcomes of the pharmaceutical care service with monthly telecommunications and a customised mobile application (telepharmacy care group) against the usual service by community pharmacists (usual care group) in 256 patients with RA and prescribed at least one of the disease-modifying antirheumatic drugs. Participants will be recruited from a tertiary hospital in Republic of Korea with written informed consent. The primary outcome will be the changes in health-related quality of life as measured by the Korean version of the EuroQoL's five-dimensional questionnaire at 6 months compared with baseline. The secondary outcomes will be the changes in the following: scores of the Korean version of the Compliance Questionnaire-Rheumatology and medication knowledge at 3 and 6 months compared with baseline; scores of the Korean version of the Pharmacy Service Questionnaire at 6 months compared with baseline; clinical parameters such as erythrocyte sedimentation rate, C reactive protein level, and pain score at 3 and 6 months compared with baseline; frequency of acute care utilisation over 6 months. Analysis will be carried out with intent-to-treat and per-protocol principles. ETHICS AND DISSEMINATION: The study protocol was reviewed and approved by the Institutional Review Board (IRB) of Daegu Catholic University Medical Center (IRB no. CR-21-082-L, 14 July 2021). The study findings will be published in peer-reviewed journals. TRIAL REGISTRATION NUMBER: KCT0006508.

Electrical and Thermal Properties of Carbon Nanotube Polymer Composites with Various Aspect Ratios.

In response to the rising need for flexible and lightweight materials capable of efficient heat transport, many studies have been conducted to improve the thermal properties of polymers via nanofillers. Among the various nanofillers, carbon nanotubes (CNTs) are considered as the most promising, owing to their excellent thermal and electrical properties. Accordingly, CNT/polymer composites can be used as flexible and lightweight heat transfer materials, owing to their low density. In this study, we fabricated multi-walled CNT (MWCNT)/polymer composites with different aspect ratios to investigate their effects on electrical and thermal properties. Through a three-roll milling process, CNTs were uniformly dispersed in the polymer matrix to form a conductive network. Enhanced electrical and thermal properties were observed in MWCNT composite with a high aspect ratio as compared to those with a low aspect ratio. The thermal conductivity of composites obtained as a function of the filler content was also compared with the results of a theoretical prediction model.

Comparison of Pressure Sensing Properties of Carbon Nanotubes and Carbon Black Polymer Composites.

Polymer composites containing conductive fillers that utilize the piezoresistive effect can be employed in flexible pressure sensors. Depending on the filler used, different characteristics of a pressure sensor such as repeatability, sensitivity, and hysteresis can be determined. To confirm the variation of the pressure sensing tendency in accordance with the dimensions of the filler, carbon black (CB) and carbon nanotubes (CNTs) were used as representative 0-dimension and 1-dimension conductive fillers, respectively. The piezoresistive effect was exploited to analyze the process of resistance change according to pressure using CB/PDMS (polydimethylsiloxane) and CNT/PDMS composites. The electrical characteristics observed for each filler were confirmed to be in accordance with its content. The pressure sensitivity of each composite was optimized, and the pressure-sensing mechanism that explains the difference in sensitivity is presented. Through repeated compression experiments, the hysteresis and repeatability of the pressure-sensing properties were examined.