Emergence of preferential flow paths and intermittent dynamics in emulsion transport in porous media.

We investigate the dynamics of emulsions within a two-dimensional porous medium using an integrated experimental approach that combines pore-level dynamics of single emulsions and bulk transport properties of the medium. Using an on-chip microfluidic drop-maker, we precisely control the concentration and sizes of emulsions injected into the medium. The dynamics of emulsion droplets are highly intermittent despite a small average velocity over the trajectory of an individual emulsion. At low concentrations, emulsions predominantly flow through pores with higher local velocities including pores smaller than the size of emulsion droplets, leading to trapping of emulsions and a decrease in medium porosity. Preferential pathways for the emulsions emerge within the medium once the porosity of the medium decreases significantly, from 55% to 36%. At constant injection flow rates and low concentrations of monodisperse emulsions, these pathways remain the only paths of transport of emulsions within the medium. Introducing a slight polydispersity in emulsion sizes unveiled additional transport pathways. Our pore-level measurements reveal that the average velocity of emulsions scales with the inverse residence time of an emulsion, and this scaling separates the emulsions into distinct groups along the emergent preferential pathways.

Foam formation during drainage of a surfactant solution in a microfluidic porous medium model.

Foam has been shown to have great potential to significantly improve sweep efficiency during gas injection in oil recovery, remediation of contaminated sites, gas storage, and acidification processes. The gas mobility reduction largely depends on the generation and stability of lamellae in the pore space that traps the gas phase. Most available analyses focus on foam formation during the co-injection of gas and liquid phases at different fractional flow (foam quality) or flow of foam formed before being injected in the porous media. During surfactant-alternating-gas (SAG) injection, foam is formed as the aqueous phase is displaced by the gas slug that follows. The dynamics of lamellae formation and their stability are different from that of a co-injection process, since the amount of surfactant available to stabilize the gas-liquid interfaces is fixed as fresh surfactant solution is not injected together with the gas phase. This work studies foam formation during the drainage of a surfactant solution by gas injection at a fixed flow rate. A transparent microfluidic model of a porous medium is used in order to enable the correlation of pore-scale phenomena and macroscopic flow behavior. The results show that the maximum number of lamellae increases with surfactant concentration, even much above the critical micelle concentration (CMC). The availability of surfactant molecules needed to stabilize newly formed gas-liquid interfaces rises with concentration. The higher number of lamellae formed at higher surfactant concentration leads to stronger mobility reduction of the gas phase and longer time needed for the gas to percolate through the porous medium.

The Effect of Mesenchymal Stem Cells Derived-Conditioned Media in Combination with Oral Anti-Androgenic Drugs on Male Pattern Baldness: An Animal Study.

OBJECTIVE: Androgenetic alopecia (AGA) is a prevalent form of hair loss, mainly caused by follicular sensitivity to androgens. Despite developing different anti-androgen treatment options, the success rate of these treatments has been limited. Using animal models, this study evaluated the therapeutic effects of umbilical cord (UC) stem cell conditioned media (CM) combined with oral anti-androgens for hair regeneration. MATERIALS AND METHODS: In this experimental study, Poloxamer 407 (P407) was used as a drug carrier for subcutaneous testosterone injection. AGA models were treated with oral finasteride, oral flutamide, and CM injections. Samples were thoroughly evaluated and compared using histological, stereological, and molecular analyses. RESULTS: Injecting CM-loaded hydrogel alone or combined with oral intake of anti-androgens improved hair regeneration. These treatments could promote hair growth by inducing hair follicles in the anagen stage and shortening the telogen and catagen phases. Furthermore, the combination treatment led to an upregulation of hair induction gene expression with a downregulation of inflammation genes. CONCLUSION: Through a reduction in inflammation, injection of CM-loaded hydrogel alone or combined with oral intake of anti-androgens induces the hair cell cycle with regeneration in damaged follicles. Hence, this could be a promising therapeutic method for AGA patients.

Protective effects of melatonin against the toxic effects of environmental pollutants and heavy metals on testicular tissue: A systematic review and meta-analysis of animal studies.

Background: Environmental pollution and infertility are two modern global challenges that agonize personal and public health. The causal relationship between these two deserves scientific efforts to intervene. It is believed that melatonin maintains antioxidant properties and may be utilized to protect the testicular tissue from oxidant effects caused by toxic materials. Methods: A systematic literature search was conducted in PubMed, Scopus, and Web of Science to identify the animal trial studies that evaluated melatonin therapy's effects on rodents' testicular tissue against oxidative stress caused by heavy metal and non-heavy metal environmental pollutants. Data were pooled, and standardized mean difference and 95% confidence intervals were estimated using the random-effect model. Also, the risk of bias was assessed using the Systematic Review Centre for Laboratory animal Experimentation (SYRCLE) tool. (PROSPERO: CRD42022369872). Results: Out of 10039 records, 38 studies were eligible for the review, of which 31 were included in the meta-analysis. Most of them showed beneficial effects of melatonin therapy on testicular tissue histopathology. [20 toxic materials were evaluated in this review, including arsenic, lead, hexavalent chromium, cadmium, potassium dichromate, sodium fluoride, cigarette smoke, formaldehyde, carbon tetrachloride (CCl4), 2-Bromopropane, bisphenol A, thioacetamide, bisphenol S, ochratoxin A, nicotine, diazinon, Bis(2-ethylhexyl) phthalate (DEHP), Chlorpyrifos (CPF), nonylphenol, and acetamiprid.] The pooled results showed that melatonin therapy increased sperm count, motility, viability and body and testicular weights, germinal epithelial height, Johnsen's biopsy score, epididymis weight, seminiferous tubular diameter, serum testosterone, and luteinizing hormone levels, testicular tissue Malondialdehyde, glutathione peroxidase, superoxide dismutase, and glutathione levels. On the other hand, abnormal sperm morphology, apoptotic index, and testicular tissue nitric oxide were lower in the melatonin therapy arms. The included studies presented a high risk of bias in most SYRCLE domains. Conclusion: In conclusion, our study demonstrated amelioration of testicular histopathological characteristics, reproductive hormonal panel, and tissue markers of oxidative stress. Melatonin deserves scientific attention as a potential therapeutic agent for male infertility. Systematic review registration: https://www.crd.york.ac.uk/PROSPERO, identifier CRD42022369872.

Protective effects of melatonin against physical injuries to testicular tissue: A systematic review and meta-analysis of animal models.

Background: Modern societies face infertility as a global challenge. There are certain environmental conditions and disorders that damage testicular tissue and may cause male infertility. Melatonin, as a potential antioxidant, may protect testicular tissue. Therefore, we conducted this systematic review and meta-analysis to evaluate the effects of melatonin in animal models against physical, heat, and ischemic damage to the testicular tissue. Methods: PubMed, Scopus, and Web of Science were systematically searched to identify animal trials evaluating the protective effect of melatonin therapy on rodent testicular tissue when it is exposed to physical, thermal, ischemic, or hypobaric oxygen stress. Random-effect modeling was used to estimate the standardized mean difference and 95% confidence intervals based on the pooled data. Additionally, the Systematic Review Centre for Laboratory Animal Experimentation (SYRCLE) tool was used to assess the risk of bias. The study protocol was prospectively registered in PROSPERO (CRD42022354599). Results: A total of 41 studies were eligible for review out of 10039 records. Studies employed direct heat, cryptorchidism, varicocele, torsion-detorsion, testicular vascular occlusion, hypobaric hypoxia, ischemia-reperfusion, stress by excessive or restraint activity, spinal cord injury, and trauma to induce stress in the subjects. The histopathological characteristics of testicular tissue were generally improved in rodents by melatonin therapy. Based on the pooled data, sperm count, morphology, forward motility, viability, Johnsen's biopsy score, testicular tissue glutathione peroxidase, and superoxide dismutase levels were higher in the melatonin treatment rodent arms. In contrast, the malondialdehyde level in testicular tissue was lower in the treatment rodent arms. The included studies suffered from a high risk of bias in most of the SYRCLE domains. Conclusion: This study concludes that melatonin therapy was associated with improved testicular histopathological characteristics, reproductive hormonal panel, and tissue markers of oxidative stress in male rodents with physical, ischemic, and thermal testicular injuries. In this regard, melatonin deserves scientific investigations as a potential protective drug against rodent male infertility. Systematic review registration: https://www.crd.york.ac.uk/PROSPERO/, identifier CRD42022354599.

Lab on a chip for a low-carbon future.

Transitioning our society to a sustainable future, with low or net-zero carbon emissions to the atmosphere, will require a wide-spread transformation of energy and environmental technologies. In this perspective article, we describe how lab-on-a-chip (LoC) systems can help address this challenge by providing insight into the fundamental physical and geochemical processes underlying new technologies critical to this transition, and developing the new processes and materials required. We focus on six areas: (I) subsurface carbon sequestration, (II) subsurface hydrogen storage, (III) geothermal energy extraction, (IV) bioenergy, (V) recovering critical materials, and (VI) water filtration and remediation. We hope to engage the LoC community in the many opportunities within the transition ahead, and highlight the potential of LoC approaches to the broader community of researchers, industry experts, and policy makers working toward a low-carbon future.

COVID-19 as a worldwide selective event and bitter taste receptor polymorphisms: An ecological correlational study.

BACKGROUND: Given the observed olfactory and gustatory dysfunctions in patients with COVID-19 and recent findings on taste receptors possible important activities in the immune system, we elected to estimate the correlation between COVID-19 mortality and polymorphism of a particular type of bitter taste receptor gene called TAS2R38, in a worldwide epidemiological point of view. METHODS: Pooled rate of each of the rs713598, rs1726866, rs10246939, and PAV/AVI polymorphisms of the TAS2R38 gene was obtained in different countries using a systematic review methodology and its relationship with the mortality of COVID-19. Data were analyzed by the comprehensive meta-analysis software and SPSS. RESULTS: There was only a significant reverse Pearson correlation in death counts and PAV/AVI ratio, p = 0.047, r = -0.503. Also, a significant reverse correlation of PAV/AVI ratio and death rate was seen, r = -0.572 p = 0.021. rs10246939 ratio had a significant positive correlation with death rate, r = 0.851 p = 0.031. Further analysis was not significant. Our results showed that the higher presence of PAV allele than AVI, and a higher rate of G allele than A in rs10246939 polymorphism in a country, could be associated with lower COVID-19 mortality. While assessing all three polymorphisms showed a huge diversity worldwide. CONCLUSION: Due to extraoral activities of bitter taste receptor genes, especially in mucosal immunity, this gene seems to be a good candidate for future studies on COVID-19 pathophysiology. Also, the high worldwide diversity of TAS2R38 genes polymorphism and its possible assassination with mortality raises concerns about the efficiency of vaccine projects in different ethnicities.

Core-Shell Nanohydrogels with Programmable Swelling for Conformance Control in Porous Media.

Conformance control during waterflooding in an oil reservoir is utilized to redistribute water and increase the sweep efficiency and hence oil production. Using preformed gel particles can effectively redirect the flow by blocking the high-permeability zones and forcing water into low-permeability zones where the oil is trapped. However, the size of such gel particles can limit their applications deeper within the reservoir and can result in shear-induced degradation near the well bore. Here, we fabricate core-shell nanohydrogels with delayed swelling behavior; their volume increases by a factor of 200 after about 30 days in brine under reservoir conditions. We study their effect on the flow behavior in a three-dimensional porous medium micromodel consisting of randomly packed glass beads. Using confocal microscopy, we directly visualize the spatial variations of flow in the micromodel before and after nanohydrogel injection and swelling. The swollen nanohydrogels block some pores reducing the permeability of the micromodel and diverting the water into low-permeability regions. A core flood experiment further confirms that the nanohydrogels can significantly reduce the permeability of a reservoir sample and divert the fluid flow. Our results demonstrate that these core-shell nanohydrogels might be useful for flow control in porous media and can be used as a conformance control agent.

Local Pore Size Correlations Determine Flow Distributions in Porous Media.

The relationship between the microstructure of a porous medium and the observed flow distribution is still a puzzle. We resolve it with an analytical model, where the local correlations between adjacent pores, which determine the distribution of flows propagated from one pore downstream, predict the flow distribution. Numerical simulations of a two-dimensional porous medium verify the model and clearly show the transition of flow distributions from δ-function-like via Gaussians to exponential with increasing disorder. Comparison to experimental data further verifies our numerical approach.

Highly Elastic and Self-Healing Composite Colloidal Gels.

Composite colloidal gels are formed by the pH-induced electrostatic assembly of silica and gelatin nanoparticles. These injectable and moldable colloidal gels are able to withstand substantial compressive and tensile loads, and exhibit a remarkable self-healing efficiency. This study provides new, critical insight into the structural and mechanical properties of composite colloidal gels and opens up new avenues for practical application of colloidal gels.

Methods for Measuring the Orientation and Rotation Rate of 3D-printed Particles in Turbulence.

Experimental methods are presented for measuring the rotational and translational motion of anisotropic particles in turbulent fluid flows. 3D printing technology is used to fabricate particles with slender arms connected at a common center. Shapes explored are crosses (two perpendicular rods), jacks (three perpendicular rods), triads (three rods in triangular planar symmetry), and tetrads (four arms in tetrahedral symmetry). Methods for producing on the order of 10,000 fluorescently dyed particles are described. Time-resolved measurements of their orientation and solid-body rotation rate are obtained from four synchronized videos of their motion in a turbulent flow between oscillating grids with Rλ = 91. In this relatively low-Reynolds number flow, the advected particles are small enough that they approximate ellipsoidal tracer particles. We present results of time-resolved 3D trajectories of position and orientation of the particles as well as measurements of their rotation rates.

Measurement of flow velocity and inference of liquid viscosity in a microfluidic channel by fluorescence photobleaching.

We present a simple, noninvasive method for simultaneous measurement of flow velocity and inference of liquid viscosity in a microfluidic channel. We track the dynamics of a sharp front of photobleached fluorescent dye using a confocal microscope and measure the intensity at a single point downstream of the initial front position. We fit an exact solution of the advection diffusion equation to the fluorescence intensity recovery curve to determine the average flow velocity and the diffusion coefficient of the tracer dye. The dye diffusivity is correlated to solute concentration to infer rheological properties of the liquid. This technique provides a simple method for simultaneous elucidation of flow velocity and liquid viscosity in microchannels.

Inertial range scaling in rotations of long rods in turbulence.

We derive a scaling relationship for the mean square rotation rate of rods with lengths in the inertial range in turbulence: ∝ l(-4/3). We present experimental measurements of the rotational statistics of neutrally buoyant rods with lengths 2.8

Rotation rate of rods in turbulent fluid flow.

The rotational dynamics of anisotropic particles advected in a turbulent fluid flow are important in many industrial and natural settings. Particle rotations are controlled by small scale properties of turbulence that are nearly universal, and so provide a rich system where experiments can be directly compared with theory and simulations. Here we report the first three-dimensional experimental measurements of the orientation dynamics of rodlike particles as they are advected in a turbulent fluid flow. We also present numerical simulations that show good agreement with the experiments and allow extension to a wide range of particle shapes. Anisotropic tracer particles preferentially sample the flow since their orientations become correlated with the velocity gradient tensor. The rotation rate is heavily influenced by this preferential alignment, and the alignment depends strongly on particle shape.

Freshmen versus interns' specialty interests.

PURPOSE: The purpose of this study was to determine career preferences of medical students at the time of entering medical school compared with interns who were graduating; and to determine what factors influence the choice of a special discipline as a career. METHODS: A cross-sectional, questionnaire-based survey study involving freshmen and interns at Tehran University of Medical Sciences was conducted in 2006 - 2007. Respondents anonymously completed a specialties questionnaire developed by Feifel et al. The questionnaire was translated into Persian (Farsi) and several items were modified based on the circumstances. RESULTS: The response rate was 91 (73%) among freshmen and 137 (77%) among interns. Forty-six freshman students (50%) and 71 interns (51.8%) indicated that they had not developed a strong decision about any particular field of medicine and needed more time. The preferred specialties among freshmen were surgery and internal medicine; whereas graduating students were more interested in "other specialties". There was no significant difference between pediatrics, gynecology, psychiatry, and general practice among the two groups. There was a significant difference in rating when it came to "anticipated income", "prestige" and "helping patients" of which interns were less interested compared to freshmen in these three areas. CONCLUSION: Approximately one-half of the medical students were unclear about their future goals. The experience of medical school may play a role in diminishing students' interest in surgery and internal medicine as prospective careers.