An Atom-Economic Method for 1,2,3-Triazole Derivatives via Oxidative [3 + 2] Cycloaddition Harnessing the Power of Electrochemical Oxidation and Click Chemistry.

An electrochemical method was developed to accomplish the reagentless synthesis of 4,5-disubstituted triazole derivatives employing secondary propargyl alcohol as C-3 synthon and sodium azide as cycloaddition counterpart. The reaction was conducted at room temperature in an undivided cell with a constant current using a pencil graphite (C) anode and stainless-steel cathode in a MeCN solvent system. The proposed reaction mechanism was convincingly established by carrying out a series of control experiments and further supported by electrochemical and density functional theory (DFT) studies.

Glycerol-plasticized agarose separator suppressing dendritic growth in Li metal battery.

The growth of dendrite is the major limitation to the development of the Li-metal battery. To solve it, we disclose the preparation and performances of separator (MAGly) with a complete "green" formulation using biosourced and sustainable compounds: agarose as biopolymer along with glycerol as plasticizing agent. The natural biopolymer films are non-porous in nature and possess high elasticity with high stiffness along a wide temperature range (-35 to 180 °C), able to prevent the perpendicular dendritic Li growth. Moreover, they provide high Li+ ionic conductivity, which was evident from electrochemical symmetrical battery tests resulted in efficient plating/stripping of Li metal, without dendrite formation. Preliminary tests in Li battery, with LiFePO4 as positive electrode show very satisfying performance regarding the same test with the commercial Celgard® separator. Furthermore, the application of this new sustainable separator can be extended to post Li-metal system as demonstrated by the electrochemical tests realized with K+/K.

Integrated Photobioelectrochemical Systems: A Paradigm Shift in Artificial Photosynthesis.

Recent breakthroughs have reinvigorated the century-old research domain of artificial photosynthesis. Here, we highlight CO2-reducing and O2-liberating integrated photobioelectrochemical systems that contain novel enzymatic cathodes and photoanodes. These devices, which are completely self-driven by solar energy with unprecedented efficiency and stability, have important implications for biotechnological research communities.

Design of Laccase-Metal Organic Framework-Based Bioelectrodes for Biocatalytic Oxygen Reduction Reaction.

Laccase in combination with 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) as a mediator is a well-known bioelectrocatalyst for the 4-electron oxygen reduction reactions (ORR). The present work deals with the first exploitation of mesoporous iron(III) trimesate-based metal organic frameworks (MOF) MIL-100(Fe) (MIL stands for materials from Institut Lavoisier) as a new and efficient immobilization matrix of laccase for the building up of biocathodes for ORR. First, the immobilization of ABTS in the pores of the MOF was studied by combining micro-Raman spectroscopy, X-ray powder diffraction (XRPD), and N2 porosimetry. The ABTS-MIL-100(Fe)-based modified electrode presents excellent properties in terms of charge transfer kinetics and ionic conductivity as well as a very stable and reproducible electrochemical response, showing that MIL-100(Fe) provides a suitable and stabilizing microenvironment for electroactive ABTS molecules. In a second step, laccase was further immobilized on the MIL-100(Fe)-ABTS matrix. The Lac-ABTS-MIL-100(Fe)-CIE bioelectrode presents a high electrocatalytic current density of oxygen reduction and a reproducible electrochemical response characterized by a high stability over a long period of time (3 weeks). These results constitute a significant advance in the field of laccase-based bioelectrocatalysts for ORR. According to our work, it appears that the high catalytic efficiency of Lac-ABTS-MIL-100(Fe) for ORR may result from a synergy of chemical and catalytic properties of MIL-100(Fe) and laccase.

Low-temperature electrodeposition approach leading to robust mesoscopic anatase TiO2 films.

Anatase TiO2, a wide bandgap semiconductor, likely the most worldwide studied inorganic material for many practical applications, offers unequal characteristics for applications in photocatalysis and sun energy conversion. However, the lack of controllable, cost-effective methods for scalable fabrication of homogeneous thin films of anatase TiO2 at low temperatures (ie. < 100 °C) renders up-to-date deposition processes unsuited to flexible plastic supports or to smart textile fibres, thus limiting these wearable and easy-to-integrate emerging technologies. Here, we present a very versatile template-free method for producing robust mesoporous films of nanocrystalline anatase TiO2 at temperatures of/or below 80 °C. The individual assembly of the mesoscopic particles forming ever-demonstrated high optical quality beads of TiO2 affords, with this simple methodology, efficient light capture and confinement into the photo-anode, which in flexible dye-sensitized solar cell technology translates into a remarkable power conversion efficiency of 7.2% under A.M.1.5G conditions.

Phase stability frustration on ultra-nanosized anatase TiO2.

This work sheds light on the exceptional robustness of anatase TiO2 when it is downsized to an extreme value of 4 nm. Since at this size the surface contribution to the volume becomes predominant, it turns out that the material becomes significantly resistant against particles coarsening with temperature, entailing a significant delay in the anatase to rutile phase transition, prolonging up to 1000 °C in air. A noticeable alteration of the phase stability diagram with lithium insertion is also experienced. Lithium insertion in such nanocrystalline anatase TiO2 converts into a complete solid solution until almost Li1TiO2, a composition at which the tetragonal to orthorhombic transition takes place without the formation of the emblematic and unwished rock salt Li1TiO2 phase. Consequently, excellent reversibility in the electrochemical process is experienced in the whole portion of lithium content.

Conducting polyfurans by electropolymerization of oligofurans.

Polyfurans have never been established as useful conjugated polymers, as previously they were considered to be inherently unstable and poorly conductive. Here, we show the preparation of stable and conducting polyfuran films by electropolymerization of a series of oligofurans of different chain lengths substituted with alkyl groups. The polyfuran films show good conductivity in the order of 1 S cm-1, good environmental and electrochemical stabilities, very smooth morphologies (roughness 1-5 nm), long effective conjugation lengths, well-defined spectroelectrochemistry and electro-optical switching (in the Vis-NIR region), and have optical band-gaps in the range of 2.2-2.3 eV. A low oxidation potential needed for polymerization of oligofurans (compared to furan) is a key factor in achievement of improved properties of polyfurans reported in this work. DFT calculations and experiments show that polyfurans are much more rigid than polythiophenes, and alkyl substitution does not disturb backbone planarity and conjugation. The obtained properties of polyfuran films are similar or superior to the properties of electrochemically prepared poly(oligothiophene)s under similar conditions.

Design of metal organic framework-enzyme based bioelectrodes as a novel and highly sensitive biosensing platform.

Nanocomposites combining the mesoporous iron(iii) trimesate MIL-100(Fe) (MIL: Matériaux Institut Lavoisier) and platinum nanoparticles (Pt-NPs) have been used as immobilization matrices of glucose oxidase (GOx). Due to the physico-chemical properties of Pt-NPs (electroactivity) and MIL-100(Fe) (high specific surface area and pore volume, biocompatibility), the resulting GOx-MIL-100(Fe)-PtNP bioelectrode exhibits excellent electrocatalytic performances for glucose detection. This novel glucose biosensor presents a high sensitivity of 71 mA M-1 cm-2 under optimum conditions and a low limit of detection of 5 µM with low response time (<5 s). In contrast, substitution of iron by chromium or aluminum in MIL-100 leads to a much lower sensitivity and higher response time values, suggesting that the iron centres of MIL-100(Fe) may be involved in a synergistic effect which indeed enhances the catalytic oxidation of glucose and biosensor activity. Thus, this work extends the scope of MOF nanoparticles with engineered cores and surface to the field of highly sensitive, durable glucose biosensors.

Room-temperature synthesis of iron-doped anatase TiO2 for lithium-ion batteries and photocatalysis.

Iron-doped nanocrystalline particles of anatase TiO2 (denoted x% Fe-TiO2, with x the nominal [Fe] atom % in solution) have been successfully synthesized at room temperature by a controlled two-step process. Hydrolysis of titanium isopropoxide is first achieved to precipitate Ti(OH)4 species. A fine control of the pH allows one to maintain (i) soluble iron species and (ii) a sluggish solubility of Ti(OH)4 to promote a dissolution and condensation of titanium clusters incorporating iron, leading to the precipitation of iron-doped anatase TiO2. The pH does then influence both the nature and crystallinity of the final phase. After 2 months of aging at pH = 2, well-dispersed nanocrystalline iron-doped TiO2 particles have been achieved, leading to 5-6 nm particle size and offering a high surface area of ca. 280 m(2)/g. This dissolution/recrystallization process allows the incorporation of a dopant concentration of up to 7.7 atom %; the successful incorporation of iron in the structure is demonstrated by X-ray diffraction, high-resolution transmission electron microscopy, and Mössbauer spectroscopy. This entails optical-band-gap narrowing from 3.05 to 2.30 eV. The pros and cons effects of doping on the electrochemical properties of TiO2 versus lithium are herein discussed. We reveal that doping improves the power rate capability of the electrode but, in turn, deserves the electrolyte stability, leading to early formation of SEI. Finally, we highlight a beneficial effect of low iron introduction into the anatase lattice for photocatalytic applications under standard AM1.5G visible-light illumination.

Controlling Pt nanoparticle formation through Se···Pt interactions on the electrode surface.

We show that interactions between the electrode surface and the transition metal during the initial step of metal nanoparticle formation can be utilized to control the formation and size of metal nanoparticles deposited on a conducting surface. Pt nanoparticles formed on the PEDOS surface are of smaller size compared to the PEDOT surface.