Effect of ß-mercaptoetanol and cysteine on post-thawing quality and oxidative activity of ram sperm and on the viability of vitrified sheep embryos / Efeito do ß-mercaptoetanol e da cisteína sobre a qualidade e a atividade oxidativa do sêmen ovino após o descongelamento e sobre a viabilidade de embriões ovinos vitrificados

The effects of ß-mercaptoethanol (BME) and cysteine on the viability and oxidative activity of ram sperm after thawing and on development in vitro and viability of vitrified sheep embryos were evaluated. Ejaculates from four rams were pooled and extended, composing six treatments: no antioxidants; 2mM BME; 5mM BME; 2mM BME and 5mM cysteine; 5mM BME and 5mM cysteine; and 5mM cysteine. Sperm motility, membrane and acrosome integrity, mitochondrial functionality, production of reactive oxygen species and total antioxidant capacity were similar across treatments (P>0.05). A medium with no antioxidant presented cleavage and blastocyst development rates (60.3% and 33.6%, respectively) similar (P>0.05) to those of a medium with 50µM BME and 600µM cysteine (64.3% and 36.6%, respectively). Post-thawing viability of vitrified embryos was similar between media (P>0.05). Cysteine and BME had no influence on the post-thawing viability and oxidative activity of ram sperm and on the viability of vitrified sheep embryos.(AU)

Foram avaliados os efeitos do ß-mercaptoetanol (BME) e da cisteína sobre a viabilidade e a atividade oxidativa após o descongelamento do sêmen ovino e sobre o desenvolvimento in vitro e a viabilidade de embriões ovinos vitrificados. Ejaculados de quatro carneiros foram agrupados e diluídos, compondo seis tratamentos: sem antioxidantes; com BME 2mM; com BME 5mM; com BME 2mM e cisteína 5mM; com BME 5mM e cisteína 5mM; e com cisteína 5mM. Motilidade, integridade da membrana e do acrossoma, função mitocondrial, produção de espécies reativas de oxigênio e capacidade antioxidante total foram semelhantes entre os tratamentos (P>0,05). Em um meio sem antioxidantes, as taxas de clivagem e de desenvolvimento embrionário até blastocisto (60,3%, e 33,6%, respectivamente) foram semelhantes (P>0,05) às obtidas em um meio com BME 50µM e cisteína 600µM (64,3% e 36,6%, respectivamente). A viabilidade pós-descongelamento dos embriões vitrificados não diferiu entre os meios (P>0,05). O BME e a cisteína não influenciaram a viabilidade e a atividade oxidativa do sêmen ovino após o descongelamento e a viabilidade de embriões ovinos vitrificados.(AU)

Effect of ß-mercaptoetanol and cysteine on post-thawing quality and oxidative activity of ram sperm and on the viability of vitrified sheep embryos / Efeito do ß-mercaptoetanol e da cisteína sobre a qualidade e a atividade oxidativa do sêmen ovino após o descongelamento e sobre a viabilidade de embriões ovinos vitrificados

The effects of ß-mercaptoethanol (BME) and cysteine on the viability and oxidative activity of ram sperm after thawing and on development in vitro and viability of vitrified sheep embryos were evaluated. Ejaculates from four rams were pooled and extended, composing six treatments: no antioxidants; 2mM BME; 5mM BME; 2mM BME and 5mM cysteine; 5mM BME and 5mM cysteine; and 5mM cysteine. Sperm motility, membrane and acrosome integrity, mitochondrial functionality, production of reactive oxygen species and total antioxidant capacity were similar across treatments (P>0.05). A medium with no antioxidant presented cleavage and blastocyst development rates (60.3% and 33.6%, respectively) similar (P>0.05) to those of a medium with 50µM BME and 600µM cysteine (64.3% and 36.6%, respectively). Post-thawing viability of vitrified embryos was similar between media (P>0.05). Cysteine and BME had no influence on the post-thawing viability and oxidative activity of ram sperm and on the viability of vitrified sheep embryos.(AU)

Foram avaliados os efeitos do ß-mercaptoetanol (BME) e da cisteína sobre a viabilidade e a atividade oxidativa após o descongelamento do sêmen ovino e sobre o desenvolvimento in vitro e a viabilidade de embriões ovinos vitrificados. Ejaculados de quatro carneiros foram agrupados e diluídos, compondo seis tratamentos: sem antioxidantes; com BME 2mM; com BME 5mM; com BME 2mM e cisteína 5mM; com BME 5mM e cisteína 5mM; e com cisteína 5mM. Motilidade, integridade da membrana e do acrossoma, função mitocondrial, produção de espécies reativas de oxigênio e capacidade antioxidante total foram semelhantes entre os tratamentos (P>0,05). Em um meio sem antioxidantes, as taxas de clivagem e de desenvolvimento embrionário até blastocisto (60,3%, e 33,6%, respectivamente) foram semelhantes (P>0,05) às obtidas em um meio com BME 50µM e cisteína 600µM (64,3% e 36,6%, respectivamente). A viabilidade pós-descongelamento dos embriões vitrificados não diferiu entre os meios (P>0,05). O BME e a cisteína não influenciaram a viabilidade e a atividade oxidativa do sêmen ovino após o descongelamento e a viabilidade de embriões ovinos vitrificados.(AU)

Evaluation of minimum interdental threshold ability in dentate female temporomandibular disorder patients.

Minimum interdental threshold is the smallest thickness that can be detected between teeth during an occlusion and has an influence on the occlusal force and on the control of mandibular movements. The aim of this study was to assess the possible association of the signs and symptoms of temporomandibular disorders (TMD) with the ability to detect a minimum interdental threshold. Two hundred women were equally divided into four groups: asymptomatic (control), subjects with masticatory muscle pain, with articular [temporomandibular joint (TMJ)] pain and mixed (muscular and articular pain). Evaluation of the ability to detect a minimum interdental threshold was performed using aluminium foils with 0.010, 0.024, 0.030, 0.050, 0.080 and 0.094 mm of thickness in the premolar region. A total of 20 tests with each thickness for each patient were performed, starting with the thickest foil (0.094 mm) and ending with the thinnest one. The myogenic pain and articular groups presented significantly higher threshold values (0.020 and 0.022 mm, respectively), when compared to the control. Both groups reached the level of certain perceptiveness only at 0.030 mm. No significant correlation was found between minimum interdental threshold and age. These results suggest that discrimination of thicknesses can be disturbed as a consequence of TMD manifestations and not the cause of it. Clinicians should, therefore, be aware that changes on muscles and TMJ can secondarily lead to occlusion changes. The mechanisms involved in this process, however, are not well understood and warrant further investigation.

Efficacy of sodium hypochlorite and coconut soap used as disinfecting agents in the reduction of denture stomatitis, Streptococcus mutans and Candida albicans.

This study evaluated the reduction of denture stomatitis and the antimicrobial activity of 0.05% sodium hypochlorite opposed to Candida albicans and Streptococcus mutans (SGM) when associated with brushing complete dentures with coconut soap. The mucosal characteristics were evaluated according to Newton's classification at baseline, after cleansing the dentures with coconut soap for 15 days in group 1 (nine patients). In the other group (19 patients) the analysis were made before and after cleansing the dentures with coconut soap and with disinfection in a soak solution of 0.05% sodium hypochlorite for 10 min during 15 days. Microbiological tests were used to isolate C. albicans and SGM. Mann-Whitney and Wilcoxon tests were used to compare the mucosal characteristics and Fisher test and McNemar test to compare C. albicans and SGM levels. Statistical analysis at the 95% confidence level (P < 0.05) showed that: (i) the association of coconut soap and 0.05% sodium hypochlorite significantly reduced clinical signs of denture stomatitis, (ii) C. albicans did not reduce in counts, (iii) SGM were reduced but not significantly and (iv) the association of coconut soap and 0.5% sodium hypochlorite was effective in controlling denture biofilm.

Evaluation of fracture resistance of endodontically treated maxillary premolars, restored with ceromer or heat-pressed ceramic inlays and fixed with dual-resin cements.

The aim of this study was to evaluate the fracture resistance of endodontically maxillary premolars restored with mesio-occlusal-distal (MOD) inlays made with ceramic (IPS-Empress 2) and ceromer (Targis) and luted with three different dual-cured resin cements (Enforce, Variolink II, Panavia F). Sixty maxillary premolars were randomly distributed into six groups, according to their mesio-distal and facio-lingual dimensions. The teeth were endodontically treated and MOD cavities prepared. After the restorations were cemented, the samples were thermocycled and submitted to an axial compressive load by the action of a rounded end steel cylinder contacting the incline planes of occlusal surfaces of the teeth. The mode of fracture was analysed with a microscope. The best results were found with the combinations (cement/restorative material) Enforce/Targis (107.57 kgf) and Enforce/Empress (90.21 kgf) followed by Variolink II/Targis (86.44 kgf)-Variolink II/Empress (84.07 kgf) and Panavia F/Targis (82.43 kgf)-Panavia F/Empress (76.73 kgf). Analysis of variance (P < 0.05) showed a significant difference between Enforce and Panavia cements regardless of the restorative material. Considering the same luting agent there was no statistically significant difference between the restorative materials. Fracture of lingual cusps occurred in 55 of the 60 teeth and most of them were of the cohesive type.

Adhesive permeability affects coupling of resin cements that utilise self-etching primers to dentine.

OBJECTIVES: To examine the effects of an experimental bonding technique that reduces the permeability of the adhesive layer on the coupling of resin cements to dentine. METHODS: Extracted human third molars had their mid to deep dentin surface exposed flat by transversally sectioning the crowns. Resin composite overlays were constructed and cemented to the surfaces using either Panavia F (Kuraray) or Bistite II DC (Tokuyama) resin cements mediated by their respective one-step or two-step self-etch adhesives. Experimental groups were prepared in the same way, except that the additional layer of a low-viscosity bonding resin (LVBR, Scotchbond Multi-Purpose Plus, 3M ESPE) was placed on the bonded dentine surface before luting the overlays with the respective resin cements. The bonded assemblies were stored for 24 h in water at 37 degrees C and subsequently prepared for microtensile bond strength testing. Beams of approximately 0.8 mm(2) were tested in tension at 0.5 mm/min in a universal tester. Fractured surfaces were examined under scanning electron microscopy (SEM). Additional specimens were prepared and examined with TEM using a silver nitrate-staining technique. RESULTS: Two-way ANOVA showed significant interactions between materials and bonding protocols (p<0.05). When bonded according to manufacturer's directions, Panavia F produced bond strengths that were significantly lower than Bistite II DC (p<0.05). The placement of an additional layer of a LVBR improved significantly the bond strengths of Panavia F (p<0.05), but not of Bistite II DC (p>0.05). SEM observation of the fractured surfaces in Panavia F showed rosette-like features that were exclusive for specimens bonded according to manufacturer's directions. Such features corresponded well with the ultrastructure of the interfaces that showed more nanoleakage associated with the more permeable adhesive interface. The application of the additional layer of the LVBR reduced the amount of silver impregnation for both adhesives suggesting that reduced permeability of the adhesives resulted in improved coupling of the resin cements to dentin. CONCLUSIONS: Placement of an intermediate layer of a LVBR between the bonded dentine surface and the resin cements resulted in improved coupling of Panavia F to dentine.

Prevalence of noncarious cervical lesions and their relation to occlusal aspects: a clinical study.

PURPOSE: The purpose of this study was to assess noncarious cervical lesions in young patients and to establish a possible relation with occlusal aspects. MATERIALS AND METHODS: Forty-eight dental students (28 males; 20 females) between the ages of 16 and 24 years, were investigated to verify the presence of noncarious cervical lesions and their relation to some occlusal aspects. The assessment involved a questionnaire, clinical examinations, and model analysis. RESULTS: The results indicated that the lower first molars (21.3%), the upper first molars (16.0%), the upper first premolars (12.8%), the lower first premolars (11.7%), and the lower second premolars (11.7%) were the teeth most affected by the lesions. Age was a significant factor with respect to the presence of lesions; the students with noncarious cervical lesions were older than the students who showed no lesions. Among the 79 teeth exhibiting lesions, 62 (78.5%) showed wear facets. In the group with lesions, the mean, per subject, was 15.0 teeth with wear facets, whereas in the group without lesions the mean was 10.8 teeth with wear facets per subject, suggesting that occlusal stress has some effect on lesion development.

A comparison of bond strengths of complete crowns using two types of cements and three cleaning agents.

This study evaluated the influence of three cleaning agents on the bond strength of complete crowns cemented with zinc phosphate and polycarboxylate cements. For the polycarboxylate cement group, three cleaning agents were used: Tergentol; Tergentol + polyacrylic acid; Tergentol + citric acid. Zinc phosphate cement was used as a control group with Tergentol. There were no statistically significant differences of mean retentive force for either cement regardless of the test conditions. The marginal fit after cementation was also evaluated and the results of zinc polycarboxylate were lower than zinc phosphate cement and were statistically significant.

The effect of tin-electroplating on the bond of four dental alloys to resin cement: an in vitro study.

STATEMENT OF THE PROBLEM: Nickel-chromium alloys are indicated for the construction of resin-bonded fixed partial dentures; however, the potential toxicity of nickel has been a source of concern. Composite cements do not develop an adequate bond to air abraded noble alloys, which cannot be electrolytically etched. Tin-electroplating of noble alloys appears to be an alternative treatment for resin bonding. PURPOSE: This in vitro study investigated the effect of tin-electroplating on the bond of a composite cement to base and noble alloys. MATERIAL AND METHODS: Tensile tests were made with disks of four alloys that were cemented to each other with an adhesive composite cement after (1) air abrasion with 50 microns aluminum oxide and (2) air abrasion plus tin-electroplating. RESULTS: Tin-electroplating increased the bond strength of metal-ceramic gold alloy (Au,Pd,Pt) to a level comparable to the nickel-chromium alloy, but had a harmful effect on type IV gold alloy. CONCLUSIONS: Despite the recommendation for tin-electroplating of type IV gold alloys, this procedure did not improve bond strength to composite in this study.

Influence of different metal restorations bonded with resin on fracture resistance of endodontically treated maxillary premolars.

STATEMENT OF PROBLEM: Fracture of endodontically treated teeth has been of great interest because it is a common clinical occurrence. PURPOSE OF STUDY: This research evaluated the fracture resistance of endodontically treated first maxillary premolars restored with different metal restorations and bonded with Panavia Ex resin. MATERIAL AND METHODS: Fifty teeth were randomly divided into five groups with MOD tooth preparation: (1) inlay with an isthmus width of one third the intercuspal distance for a silver amalgam restoration (negative control), (2) inlay with an isthmus width equal to that in group 1, (3) inlay with an isthmus width of half the intercuspal distance, (4) equal to group 3 with lingual and proximal preparation, and (5) onlay (positive control). The cast restorations of groups 2, 3, and 4 were bonded with Panavia Ex resin and those from group 5 cemented with zinc phosphate cement. Samples were restored and subjected to thermocycling, and the teeth were submitted to an axial compressive force. RESULTS: The cast inlay restorations that bonded with Panavia Ex resin significantly elevated the fracture resistance of endodontically treated maxillary premolars compared with the silver amalgam restorations. However, teeth restored with cast onlay restorations cemented with zinc phosphate cements recorded the best results. CONCLUSION: The increase of fracture resistance by MOD inlay cast restoration bonded with Panavia Ex resin suggested valid clinical application within the conditions of this study.

Tensile bond strength of a resinous cement to a nickel-chromium alloy modified with five surface treatments.

A problem associated with resin-bonded fixed partial dentures is inadvertent dislodgment at the metal/cement interface. It has been suggested that Panavia Ex resinous cement requires only air abrasion of the alloy with 50 microns aluminum oxide particles to record reliable bond strength values. The purpose of this study was to discuss the consequences of changes in the type of air abrasion and surface oxidation of the alloy. Fifty pairs of disks of a Ni-Cr alloy were treated by five methods: (1) air abrasion with 50 microns aluminum oxide (control), (2) air abrasion with 50 microns glass beads, (3) air abrasion with a mixture of aluminum oxide and glass beads (ratio 1:1), (4) air abrasion with aluminum oxide and immersion in acid solution of potassium permanganate, and (5) air abrasion with aluminum oxide and immersion in aqueous solution of potassium permanganate. The disks were cemented to each other with Panavia Ex composite resinous cement and tensile tests were conducted at a crosshead speed of 0.5 mm/ minute. No statistically significant differences were recorded among the treatments for the alloys used in this study except air abrasion with glass beads, which exhibited the lowest bond strength values.

A cross-sectional study of prevalence and etiology of signs and symptoms of temporomandibular disorders in high school and university students.

The aim of this study was to evaluate the prevalence and need for treatment of temporomandibular disorders (TMD) in students living in Bauru, Brazil. The role of occlusal and emotional factors was also addressed. The presence and severity of TMD was determined by using a self-reported anamnestic questionnaire composed of 10 questions regarding common TMD symptoms. The symptoms were transposed into a severity classification according to the number and frequency of positive responses. Occlusal evaluation included an analysis of retruded contact position, intercuspal position, anterolateral guidance, and nonworking side contacts during mandibular movements. Palpation of the muscles and temporomandibular joints were performed to detect clinical signs of TMD. A chi square test was used to compare clinical and occlusal data with the presence and severity of TMD. A total of 0.65% of the subjects had severe TMD symptoms, 5.81% had moderate symptoms, and 34.84% had mild symptoms. Those with severe and moderate symptom levels were interpreted to be in need of treatment. Symptoms were found significantly more frequently in females than in males (P < .01). Self-reported emotional tension and parafunctional habits demonstrated strong associations with TMD (P < .01). Occlusion did not seem to influence the presence or severity of TMD. Based on these results, the efficacy of some traditional TMD treatments should be reconsidered, and reversible and conservative procedures should be the first choice for managing TMD patients.

A comparison of tensile bond strengths of resin-retained prostheses made using five alloys.

This in vitro study evaluated the bond strength of metal frameworks cast using Ni-Cr, Ni-Cr-Be, Cu-Al, type IV gold, and noble metal ceramic alloy with and without tin electroplating. The castings were luted to human teeth using Panavia Ex resin. It was found that tin electroplating had a negative effect for the Cu-Al and type IV gold alloys and a positive effect for gold for metal ceramic restorations. The best results were obtained using the Ni-Cr alloy.

Tensile bond strength of a composite resin cement for bonded prosthesis to various dental alloys.

The development of composite resin cements that chemically bond to dental alloys has improved the construction of resin-bonded prostheses. Composite resins can be selected for various situations, but specific clinical situations may require different alloys. This study evaluated the ability of a composite resin cement to bond to various dental alloys of different compositions. Ten pairs of disks for each alloy (two NiCr, two NiCrBe, one CuAl, one gold type IV, and one gold for metal ceramic) were bonded to a composite resin cement after air abrasion was performed with aluminum oxide. The disks were then rinsed in tap water and were ultrasonically cleaned in distilled water for 2 minutes. The tensile tests exhibited greater values for alloys ultrasonically cleaned, and the best results were recorded by NiCr and NiCrBe alloys.

Tensile bone strength of Panavia Ex to a Ni-Cr alloy using different surface treatments.

Panavia Ex resin has been claimed to require only air abrasion of the alloy with 50 micrometers aluminum oxide particles to reach acceptable bond strength values. This study discusses the consequences of changes in the type of air abrasion and surface oxidation of the alloy. Thirty pairs of discs of a Ni-Cr alloy were treated by three methods: 1) air abrasion with 50 micrometers aluminum oxide (control); 2) air abrasion with glass beads; 3) air abrasion with a mixture of aluminum oxide and glass beads (ratio 1:1). The Tukey test showed statistical differences only for air abrasion with glass beads.

Effect of human interleukin 3 on the susceptibility of fresh leukemia cells to interleukin-2-induced lymphokine activated killing activity.

Pretreatment of acute myeloblastic leukemia cells with the hemopoietic growth factor interleukin 3 (IL3) increased their susceptibility to lymphokine activated killing (LAK) but did not affect their constitutive resistance to native natural killer activity. In addition, IL3 treatment did not alter the LAK cell-mediated killing of CD34+ hemopoietic progenitors present in normal bone marrow. Increased 3H-thymidine uptake was generally observed after IL3 treatment. However, failure to proliferate in response to IL3, observed in some cases, did not prevent changes in LAK susceptibility. Enhanced lysis of IL3-treated leukemic cells was accompanied by a moderate increase of the effector-target binding. Increased LAK susceptibility was already observed at 18 h, while optimal cytolysis and expression of the cell adhesion molecule (CAM) LFA-3 (CD58) by IL3-treated AML cells were concomitantly observed at later culture times. In contrast, the CAM ICAM-1 (CD54) was not modulated by IL3, nor were significant changes in the expression of either CAMs observed in normal hemopoietic cells. Blocking experiments with the anti-CD58 monoclonal antibody demonstrated a variable neutralizing effect on the IL3-induced increase of LAK activity, depending on the leukemia cell studied. The effect described here, together with the known role of IL3 in normal hemopoiesis makes it a factor of potential therapeutic value for the treatment of leukemic patients.

[Traction resistance of cast metal posts with and without retention, cemented with zinc phosphate cement in smooth and rough canals]. / Avaliação da resistência à remoção por tração de núcleos metálicos fundidos com e sem retenção, fixados com cimento de fosfato de zinco em condutos lisos e com retenções.

The purpose of this research was to test the traction resistance of cast posts and cores with and without roughness cemented with zinc phosphate cement in cuspids roots, with smooth and roughness canals walls. From the results of the tests and statistical analysis there was significant difference between roughness posts cemented in root canals with roughness walls and smooth posts cemented in smooth root canals. It was also analyzed, the retention of cast crows cemented on roughness posts and canals and it was concluded that posts are responsible for crows retention, when the cores were done at the correct way.

[Surface roughness of investment samples and their metal castings]. / Avaliaçao da rugosidade superficial de corpos de prova de revestimento e respectivos blocos metálicos obtidos.

Three phosphate bonded investments and three calcium type were studied observing the influence of investment on the final cast surface roughness. Increased dilution also incremented roughness for the phosphate investments. Between the two types of investments there was only significant difference concerning two specific commercial brands, but there were differences in the same type of investment among these different brands.