Use of simulation to optimize a sweet corn breeding program: implementing genomic selection and doubled haploid technology.

Genomic selection and doubled haploids hold significant potential to enhance genetic gains and shorten breeding cycles across various crops. Here, we utilized stochastic simulations to investigate the best strategies for optimize a sweet corn breeding program. We assessed the effects of incorporating varying proportions of old and new parents into the crossing block (3:1, 1:1, 1:3, and 0:1 ratio, representing different degrees of parental substitution), as well as the implementation of genomic selection in two distinct pipelines: one calibrated using the phenotypes of testcross parents (GSTC scenario) and another using F1 individuals (GSF1). Additionally, we examined scenarios with doubled haploids, both with (DH) and without (DHGS) genomic selection. Across 20 years of simulated breeding, we evaluated scenarios considering traits with varying heritabilities, the presence or absence of genotype-by-environment effects, and two program sizes (50 versus 200 crosses per generation). We also assessed parameters such as parental genetic mean, average genetic variance, hybrid mean, and implementation costs for each scenario. Results indicated that within a conventional selection program, a 1:3 parental substitution ratio (replacing 75% of parents each generation with new lines) yielded the highest performance. Furthermore, the GSTC model outperformed the GSF1 model in enhancing genetic gain. The DHGS model emerged as the most effective, reducing cycle time from five to four years and enhancing hybrid gains despite increased costs. In conclusion, our findings strongly advocate for the integration of genomic selection and doubled haploids into sweet corn breeding programs, offering accelerated genetic gains and efficiency improvements.

Utilizing genomic prediction to boost hybrid performance in a sweet corn breeding program.

Sweet corn breeding programs, like field corn, focus on the development of elite inbred lines to produce commercial hybrids. For this reason, genomic selection models can help the in silico prediction of hybrid crosses from the elite lines, which is hypothesized to improve the test cross scheme, leading to higher genetic gain in a breeding program. This study aimed to explore the potential of implementing genomic selection in a sweet corn breeding program through hybrid prediction in a within-site across-year and across-site framework. A total of 506 hybrids were evaluated in six environments (California, Florida, and Wisconsin, in the years 2020 and 2021). A total of 20 traits from three different groups were measured (plant-, ear-, and flavor-related traits) across the six environments. Eight statistical models were considered for prediction, as the combination of two genomic prediction models (GBLUP and RKHS) with two different kernels (additive and additive + dominance), and in a single- and multi-trait framework. Also, three different cross-validation schemes were tested (CV1, CV0, and CV00). The different models were then compared based on the correlation between the estimated breeding values/total genetic values and phenotypic measurements. Overall, heritabilities and correlations varied among the traits. The models implemented showed good accuracies for trait prediction. The GBLUP implementation outperformed RKHS in all cross-validation schemes and models. Models with additive plus dominance kernels presented a slight improvement over the models with only additive kernels for some of the models examined. In addition, models for within-site across-year and across-site performed better in the CV0 than the CV00 scheme, on average. Hence, GBLUP should be considered as a standard model for sweet corn hybrid prediction. In addition, we found that the implementation of genomic prediction in a sweet corn breeding program presented reliable results, which can improve the testcross stage by identifying the top candidates that will reach advanced field-testing stages.

Repetitive DNA Mapping in Five Genera of Tree Frogs (Amphibia: Anura) from the Atlantic Forest: New Highlights on Genomic Organization in Hylidae.

INTRODUCTION: The tribes Cophomantini, Scinaxini, and Dendropsophini are anurans that belong to Hylidae, with wide distribution in tropical and subtropical regions around the world. The taxonomy and systematics of this family remain in a state of ongoing revision. Previous cytogenetic analyses of genera Boana, Bokermannohyla, Ololygon, Scinax, and Dendropsophus described some karyotypic characters such as conventional staining, C-banding and NORs, and FISH with specific probes. METHODS: This study describes for the first time the karyotypes of four species: Bokermannohyla ibitipoca, Ololygon luizotavioi, Dendropsophus bipunctatus, and Dendropsophus ruschii. Furthermore, we map CA(15) and CAT(10) microsatellite sites for the aforementioned species and six more species from the same genera for insight into the chromosomal evolution within the subfamily Hyalinae. RESULTS: B. ibitipoca and O. luizotavioi had 2n = 24 and karyotypic formulas 18m + 4sm + 2st and 8m + 12sm + 4st, while D. bipunctatus and D. ruschii showed 2n = 30 and karyotypic formulas 12m + 12sm + 4st + 2t and 10m + 10sm + 6st + 4t, respectively. The diploid numbers and karyotypic formulas revealed here follow the previously reported trend for Hylidae, except B. ibitipoca has a particularity of eight metacentric chromosomes, more than what is commonly found in species of this genus. The microsatellites probes CA(15) and CAT(10) had markings accumulated in blocks in the centromeric, pericentromeric, and terminal regions that were more specific for some species, as well as markings scattered along the chromosomes. We present a comprehensive review table of current data on cytogenetics of these genera. CONCLUSION: Our findings showed that the karyotypes of the hylids studied here majority fit the postulated conserved diploid number (2n = 24) and morphological chromosome patterns, while the mapping of the microsatellites enabled us to detect differences between species that share similar chromosomal morphologies.

Genotype plus genotype by-environment interaction biplot and genetic diversity analyses on multi-environment trials data of yield and technological traits of cotton cultivars / Biplot de genótipo mais interação genótipo por ambiente e diversidade genética em dados de produtividade e qualidade de fibras em cultivares de algodão provenientes de ensaios multi-ambientes

Understanding the genetic diversity and overcoming genotype-by-environment interaction issues is an essential step in breeding programs that aims to improve the performance of desirable traits. This study estimated genetic diversity and applied genotype + genotype-by-environment (GGE) biplot analyses in cotton genotypes. Twelve genotypes were evaluated for fiber yield, fiber length, fiber strength, and micronaire. Estimation of variance components and genetic parameters was made through restricted maximum likelihood and the prediction of genotypic values was made through best linear unbiased prediction. The modified Tocher and principal component analysis (PCA) methods, were used to quantify genetic diversity among genotypes. GGE biplot was performed to find the best genotypes regarding adaptability and stability. The Tocher technique and PCA allowed for the formation of clusters of similar genotypes based on a multivariate framework. The GGE biplot indicated that the genotypes IMACV 690 and IMA08 WS were highly adaptable and stable for the main traits in cotton. The cross between the genotype IMACV 690 and IMA08 WS is the most recommended to increase the performance of the main traits in cotton crops.

Compreender a diversidade genética e contornar os problemas causados pela interação genótipos por ambientes é uma etapa importante em programas de melhoramento. Este estudo teve como objetivo estimar a diversidade genética e aplicar a metodologia de biplot genótipo + genótipo por ambiente (GGE biplot) em doze genótipos de algodão avaliados quanto ao rendimento da fibra, comprimento da fibra, resistência da fibra e micronaire. A estimativa dos componentes de variância e dos parâmetros genéticos foi feita através do método da máxima verossimilhança restrita e a predição dos valores genotípicos por meio da melhor predição linear não enviesada. Os métodos de Tocher modificado e análise de componentes principais (PCA) foram utilizados para quantificar a diversidade genética entre os genótipos. O método GGE biplot foi conduzido para encontrar os melhores genótipos em relação à adaptabilidade e estabilidade. As técnicas de Tocher e PCA permitiram a formação de clusters de genótipos semelhantes com base em uma estrutura multivariada. O GGE biplot indicou que os genótipos IMACV 690 e IMA08 WS foram altamente adaptáveis e estáveis para as principais características do algodão. O cruzamento dentre os genótipos IMACV 690 e IMA08 WS é o mais recomendado para aumentar o desempenho das principais características na cultura do algodão.

Accounting for spatial trends in multi-environment diallel analysis in maize breeding.

Spatial trends represent an obstacle to genetic evaluation in maize breeding. Spatial analyses can correct spatial trends, which allow for an increase in selective accuracy. The objective of this study was to compare the spatial (SPA) and non-spatial (NSPA) models in diallel multi-environment trial analyses in maize breeding. The trials consisted of 78 inter-populational maize hybrids, tested in four environments (E1, E2, E3, and E4), with three replications, under a randomized complete block design. The SPA models accounted for autocorrelation among rows and columns by the inclusion of first-order autoregressive matrices (AR1 ⊗ AR1). Then, the rows and columns factors were included in the fixed and random parts of the model. Based on the Bayesian information criteria, the SPA models were used to analyze trials E3 and E4, while the NSPA model was used for analyzing trials E1 and E2. In the joint analysis, the compound symmetry structure for the genotypic effects presented the best fit. The likelihood ratio test showed that some effects changed regarding significance when the SPA and NSPA models were used. In addition, the heritability, selective accuracy, and selection gain were higher when the SPA models were used. This indicates the power of the SPA model in dealing with spatial trends. The SPA model exhibits higher reliability values and is recommended to be incorporated in the standard procedure of genetic evaluation in maize breeding. The analyses bring the parents 2, 10 and 12, as potential parents in this microregion.

Multiple-trait model through Bayesian inference applied to Jatropha curcas breeding for bioenergy.

Multiple-trait model tends to be the best alternative for the analysis of repeated measures, since they consider the genetic and residual correlations between measures and improve the selective accuracy. Thus, the objective of this study was to propose a multiple-trait Bayesian model for repeated measures analysis in Jatropha curcas breeding for bioenergy. To this end, the grain yield trait of 730 individuals of 73 half-sib families was evaluated over six harvests. The Markov Chain Monte Carlo algorithm was used to estimate genetic parameters and genetic values. Genetic correlation between pairs of measures were estimated and four selective intensities (27.4%, 20.5%, 13.7%, and 6.9%) were used to compute the selection gains. The full model was selected based on deviance information criterion. Genetic correlations of low (ρg ≤ 0.33), moderate (0.34 ≤ ρg ≤ 0.66), and high magnitude (ρg ≥ 0.67) were observed between pairs of harvests. Bayesian analyses provide robust inference of genetic parameters and genetic values, with high selective accuracies. In summary, the multiple-trait Bayesian model allowed the reliable selection of superior Jatropha curcas progenies. Therefore, we recommend this model to genetic evaluation of Jatropha curcas genotypes, and its generalization, in other perennials.

Models for optimizing selection based on adaptability and stability of cotton genotypes / Modelos para otimizar a seleção baseada em adaptabilidade e estabilidade de genótipos de algodão

ABSTRACT: In multi-environment trials (MET), large networks are assessed for results improvement. However, genotype by environment interaction plays an important role in the selection of the most adaptable and stable genotypes in MET framework. In this study, we tested different residual variances and measure the selection gain of cotton genotypes accounting for adaptability and stability, simultaneously. Twelve genotypes of cotton were bred in 10 environments, and fiber length (FL), fiber strength (FS), micronaire (MIC), and fiber yield (FY) were determined. Model selection for different residual variance structures (homogeneous and heterogeneous) was tested using the Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC). The variance components were estimated through restricted maximum likelihood and genotypic values were predicted through best linear unbiased prediction. The harmonic mean of relative performance of genetic values (HMRPGV) were applied for simultaneous selection for adaptability, stability, and yield. According to BIC heterogeneous residual variance was the best model fit for FY, whereas homogeneous residual variance was the best model fit for FL, FS, and MIC traits. The selective accuracy was high, indicating reliability of the prediction. The HMRPGV was capable to select for stability, adaptability and yield simultaneously, with remarkable selection gain for each trait.

RESUMO: Em ensaios multi-ambientes, grandes redes experimentais são utilizadas para a avaliação de genótipos, tentando contornar o efeito que a interação genótipo por ambiente desempenha na seleção genotípica. Neste estudo, objetivamos testar diferentes estruturas de variância residual e medir o ganho de seleção de genótipos de algodão, baseados em produtividade, adaptabilidade e estabilidade, simultaneamente. Doze genótipos de algodão foram plantados em 10 ambientes, sendo determinados o comprimento da fibra (CF), a resistência da fibra (RF), a micronaire (MIC) e produtividade de fibras (PF). A seleção do modelo para diferentes estruturas de variância residual (homogênea e heterogênea) foi testada usando o Critério de Informação de Akaike (AIC) e o Critério de Informação Bayesiano (BIC). Os componentes de variância foram estimados através de máxima verossimilhança restrita e os valores genotípicos foram preditos através da melhor predição linear não viesada. A média harmônica do desempenho relativo dos valores genéticos (HMRPGV) foram aplicadas para seleção simultânea para adaptabilidade, estabilidade e produtividade. De acordo com o BIC, a estrutura residual heterogênea apresentou o melhor ajuste para a característica PF, enquanto a estrutura residual homogênea apresentou o melhor ajuste para as características CF, RF e MIC. A acurácia seletiva foi alta, indicando confiabilidade da predição. O método HMRPGV foi capaz de selecionar para estabilidade, adaptabilidade e produtividade, simultaneamente, com notável ganho de seleção para cada característica.

Soybean productivity, stability, and adaptability through mixed model methodology / Produtividade, estabilidade e adaptabilidade da soja por meio de metodologia de modelo misto

ABSTRACT: The genotype × environment (G×E) interaction plays an essential role in phenotypic expression and can lead to difficulties in genetic selection. Thus, the present study aimed to estimate genetic parameters and to compare different selection strategies in the context of mixed models for soybean breeding. For this, data referring to the evaluation of 30 genotypes in 10 environments, regarding the grain yield trait, were used. The variance components were estimated through restricted maximum likelihood (REML) and genotypic values were predicted through best linear unbiased prediction (BLUP). Significant effects of genotypes and G×E interaction were detected by the likelihood ratio test (LRT). Low genotypic correlation was obtained across environments, indicating complex G×E interaction. The selective accuracy was very high, indicating high reliability. Our results showed that the most productive soybean genotypes have high adaptability and stability.

RESUMO: A interação genótipo × ambiente (G × E) desempenha um papel essencial na expressão fenotípica e pode provocar dificuldades na seleção genética. Assim, o presente estudo teve como objetivo estimar parâmetros genéticos e comparar diferentes estratégias de seleção no contexto de modelos mistos para melhoramento da soja. Para isso, foram utilizados dados referentes à avaliação de 30 genótipos em dez ambientes, referentes à característica produtividade de grãos. Os componentes de variância foram estimados pela máxima verossimilhança restrita (REML) e os valores genotípicos foram preditos pela melhor previsão imparcial linear (BLUP). Efeitos significativos dos genótipos e interação G × E foram detectados pelo teste da razão de verossimilhança (LRT). Correlação genotípica baixa foi obtida entre os ambientes indicando interação G × E do tipo complexa. A acurácia seletiva foi muito alta, indicando alta confiabilidade. Os resultados mostraram que os genótipos de soja mais produtivos apresentam alta adaptabilidade e estabilidade.

Random regression for modeling yield genetic trajectories in Jatropha curcas breeding.

Random regression models (RRM) are a powerful tool to evaluate genotypic plasticity over time. However, to date, RRM remains unexplored for the analysis of repeated measures in Jatropha curcas breeding. Thus, the present work aimed to apply the random regression technique and study its possibilities for the analysis of repeated measures in Jatropha curcas breeding. To this end, the grain yield (GY) trait of 730 individuals of 73 half-sib families was evaluated over six years. Variance components were estimated by restricted maximum likelihood, genetic values were predicted by best linear unbiased prediction and RRM were fitted through Legendre polynomials. The best RRM was selected by Bayesian information criterion. According to the likelihood ratio test, there was genetic variability among the Jatropha curcas progenies; also, the plot and permanent environmental effects were statistically significant. The variance components and heritability estimates increased over time. Non-uniform trajectories were estimated for each progeny throughout the measures, and the area under the trajectories distinguished the progenies with higher performance. High accuracies were found for GY in all harvests, which indicates the high reliability of the results. Moderate to strong genetic correlation was observed across pairs of harvests. The genetic trajectories indicated the existence of genotype × measurement interaction, once the trajectories crossed, which implies a different ranking in each year. Our results suggest that RRM can be efficiently applied for genetic selection in Jatropha curcas breeding programs.

Multiple-trait, random regression, and compound symmetry models for analyzing multi-environment trials in maize breeding.

An efficient and informative statistical method to analyze genotype-by-environment interaction (GxE) is needed in maize breeding programs. Thus, the objective of this study was to compare the effectiveness of multiple-trait models (MTM), random regression models (RRM), and compound symmetry models (CSM) in the analysis of multi-environment trials (MET) in maize breeding. For this, a data set with 84 maize hybrids evaluated across four environments for the trait grain yield (GY) was used. Variance components were estimated by restricted maximum likelihood (REML), and genetic values were predicted by best linear unbiased prediction (BLUP). The best fit MTM, RRM, and CSM were identified by the Akaike information criterion (AIC), and the significance of the genetic effects were tested using the likelihood ratio test (LRT). Genetic gains were predicted considering four selection intensities (5, 10, 15, and 20 hybrids). The selected MTM, RRM, and CSM models fit heterogeneous residuals. Moreover, for RRM the genetic effects were modeled by Legendre polynomials of order two. Genetic variability between maize hybrids were assessed for GY. In general, estimates of broad-sense heritability, selective accuracy, and predicted selection gains were slightly higher when obtained using MTM and RRM. Thus, considering the criterion of parsimony and the possibility of predicting genetic values of hybrids for untested environments, RRM is a preferential approach for analyzing MET in maize breeding.

Karyological study of Ololygon tripui (Lourenço, Nascimento and Pires, 2009), (Anura, Hylidae) with comments on chromosomal traits among populations.

To increase the number of cytogenetic characters used in Ololygon tripui systematics, we applied some cytogenetic techniques such as Giemsa, C- and NOR-banding, and fluorescence in situ hybridization (FISH) with 18S rDNA and repetitive microsatellite DNA probes to the study of four populations from Minas Gerais State (southeastern Brazil). All populations showed 2n = 24 and FN = 48, and chromosomal formula 8m + 10sm + 6st. Nucleolar organizing regions (NORs) were located on chromosome pair 6 in all populations, although in the Tripuí locality additional markings were observed on one homologue of chromosome pair 3. These patterns were partially congruent with results obtained using the 18S rDNA FISH probe. The microsatellites repetitive DNA (GA)15 and (CAT)10 probes accumulated predominantly in the terminal region of all chromosomes. Chromosome morphology and Ag-NOR were conserved among populations, a conserved pattern in Ololygon Fitzinger, 1843. Repetitive DNA FISH probes patterns were similar among populations, but they revealed species-specific differences when compared with other species of the genus Ololygon, suggesting that molecular cytogenetics are potentially more informative in karyologically conservative taxa.

The karyotypes of five species of the Scinax perpusillus group (Amphibia, Anura, Hylidae) of southeastern Brazil show high levels of chromosomal stabilization in this taxon.

Based on morphological, bioacoustics, and morphological traits, the genus Scinax has been subdivided into two major clades: S. catharinae and S. ruber. The first clade includes S. catharinae and S. perpusillus groups, whereas the second clade includes S. rostratus and S. uruguayus groups. Chromosome morphology, NOR and C-banding patterns of variation support these clades. This study aims the cytogenetic characterization of five species currently included in the S. perpusillus group: Scinax sp. (gr. perpusillus), S. arduous, S. belloni, S. cosenzai, and S. v-signatus, including standard cytogenetic techniques and repetitive DNA FISH probes. All species had 2n = 24 chromosomes. Nucleolar organizing regions occurred in chromosome pair 6 in all species, but differed in their locations among some species, suggesting a putative synaponomastic character for the clade. In S. belloni, the first chromosome pair was a metacentric, contrasting with the submetacentric first pair reported in all other species of the genus. Scinax sp. (gr. perpusillus) and S. v-signatus had similar karyotypic formulae, suggesting they are related species. Scinax cosenzai had a divergent C-banding pattern. Repetitive DNA probes hybridized more frequently in chromosomal subtelomeric regions in all species indicating recent cladogenesis in these species. Karyotypic evidence indicates unreported high levels of stabilization within S. perpusillus and in S. catharinae clade, resulting in a wealth of characters potentially informative for higher phylogenetic analyses.

Carcinoma de células escamosas indiferenciado: relato de caso clínico / Oral squamous cell carcinoma: clinic cases report

O carcinoma de células escamosas é uma das neoplasias de maior interesse para o cirurgião-dentista, devido a sua freqüente e agressiva ocorrência nos lábios, língua e assoalho de boca. O aspecto clínico do carcinoma de células escamosas é variável, dependendo do estágio da lesão e da natureza de seu crescimento. Os autores relatam um caso clínico de um carcinoma indiferenciado de células escamosas, descoberto pelo Setor de Patologia e Diagnóstico Oral (Sepadio) da Faculdade de Odontologia de Campos (FOC) em um paciente adulto que procurou por atendimento odontológico