RESUMEN
Amphiphilic Janus silica particles, tunable with oleophobic-oleophilic properties and low fluorine content (8 wt % F), exhibited prominent foamability for a variety of aromatic alcohols at low particle concentrations (<1 wt %) compared to randomly functionalized silica particles. When selectively loaded with Pd nanoparticles on the oleophilic hemisphere, the particles displayed more than a 2-fold increase in catalytic activity for the aerobic oxidation of benzyl alcohol compared to nonfoam bulk catalysis under ambient O2 pressure. The particles were conveniently recycled with high foamability and catalytic activity maintained for at least five consecutive runs.
RESUMEN
Gas-liquid-solid catalytic reactions are widespread in nature and man-made technologies. Recently, the exceptional reactivity observed on (electro)sprayed microdroplets, in comparison to bulk gas-liquid systems, has attracted the attention of researchers. In this perspective, we compile possible strategies to engineer catalytically active gas-liquid-(solid) interfaces based on membrane contactors, microdroplets, micromarbles, microbubbles, and microfoams to produce commodity chemicals such as hydrogen peroxide, ammonia, and formic acid. In particular, particle-stabilized microfoams, with superior upscaling capacity, emerge as a promising and versatile platform to conceive high-performing (catalytic) gas-liquid-(solid) nanoreactors. Gas-liquid-(solid) nanoreactors could circumvent current limitations of state-of-the-art multiphase reactors (e.g., stirred tanks, trickle beds, and bubble columns) suffering from poor gas solubility and mass transfer resistances and access gas-liquid-(solid) reactors with lower cost and carbon footprint.
RESUMEN
Nonaqueous foams in low-surface tension solvents (<25 mN·m-1) are highly desired for applications in fire extinguishers and detoxification gels. However, their formation is a Holy Grail of the chemical industry due to the need for stabilizers with low surface energy and high recyclability. Herein, we disclose a new strategy to generate abundant foams in ethanol and a variety of low-surface tension solvents relying on the interfacial coadsorption of two different particles. The particles consist of surface-active fluorinated silica particles, used as a stabilizer, and a novel amphiphilic polyhedral oligomeric silsesquioxane (POSS) decorated with isobutyl cage substituents, used as a frother. The interaction between POSS and fluorinated particles at the ethanol-air interface was thoroughly investigated by combining physicochemical methods (contact angle, dynamic surface tension, and dynamic light scattering methods) and catalytic tests using the model aerobic oxidation reaction of benzyl alcohol. Both particles could be conveniently recycled for at least 5 consecutive runs with high foamability and catalytic activity.
RESUMEN
α,ß-Unsaturated aldehydes are important building blocks for the synthesis of a wide range of chemicals, including polymers. The synthesis of these molecules from cheap feedstocks such as alkenes remains a scientific challenge, mainly due to the low reactivity of alkenes. Here we report a selective and metal-free access to α,ß-unsaturated aldehydes from alkenes with formaldehyde. This reaction is catalyzed by dimethylamine and affords α,ß-unsaturated aldehydes in yields of up to 80 %. By combining Density Functional Theory (DFT) calculations and experiments, we elucidate the reaction mechanism which is based on a cascade of hydride transfer, hydrolysis and aldolization reactions. The reaction can be performed under very mild conditions (30-50 °C), in a theoretically 100 % carbon-economical fashion, with water as the only by-product. The reaction was successfully applied to non-activated linear 1-alkenes, thus opening an access to industrially relevant α,ß-unsaturated aldehydes from cheap and widely abundant chemicals at large scale.
RESUMEN
In this study, we investigated the effect of the pore volume and mesopore size of surface-active catalytic organosilicas on the genesis of particle-stabilized (Pickering) emulsions for the dodecanal/ethylene glycol system and their reactivity for the acid-catalyzed biphasic acetalization reaction. To this aim, we functionalized a series of fumed silica superparticles (size 100-300 nm) displaying an average mesopore size in the range of 11-14 nm and variable mesopore volume, with a similar surface density of octyl and propylsulfonic acid groups. The modified silica superparticles were characterized in detail using different techniques, including acid-base titration, thermogravimetric analysis, TEM, and dynamic light scattering. The pore volume of the particles impacts their self-assembly and coverage at the dodecanal/ethylene glycol (DA/EG) interface. This affects the stability and the average droplet size of emulsions and conditions of the available interfacial surface area for reaction. The maximum DA-EG productivity is observed for A200 super-SiNPs with a pore volume of 0.39 cm3·g-1 with an interfacial coverage by particles lower than 1 (i.e., submonolayer). Using dissipative particle dynamics and all-atom grand canonical Monte Carlo simulations, we unveil a stabilizing role of the pore volume of porous silica superparticles for generating emulsions and local micromixing of immiscible dodecanal and ethylene glycol, allowing fast and efficient solvent-free acetalization in the presence of Pickering emulsions. The micromixing level is interrelated to the adsorption energy of self-assembled particles at the DA/EG interface.
RESUMEN
A designed N-heterocyclic carbene (NHC) catalyst was covalently anchored on a range of mesoporous and hierarchical supports, to study the influence of pore size in the benzoin condensation of furfural. The structural and spectroscopic characteristics of the anchored catalysts were investigated, also with the help of molecular dynamics simulations, in order to rationalize the degree of stability and recyclability of the heterogenized organocatalysts. Quantitative yields (99 %) and complete recyclability were maintained after several cycles, vindicating the design rationale.
Asunto(s)
Benzoína , Furaldehído , Benzoína/química , Bencimidazoles , Simulación de Dinámica Molecular , CatálisisRESUMEN
A novel amphiphilic polyhedral oligomeric silsesquioxane (POSS) with surfactant-like behavior was synthesized. By combining this new POSS, used as a frother, with surface-active catalytic organosilica particles, used as a stabilizer, we designed a dual particle system able to generate foams in pure organic solvents. Tunable foamability and foam stability were achieved in a variety of organic solvents by simply adjusting the POSS concentration. As a result, the catalytic activity was drastically boosted in the aerobic oxidation of pure aromatic alcohols under 1 bar O2 pressure. Particles were conveniently recycled with high foamability and the catalytic efficiency was maintained for at least 7 consecutive runs.
RESUMEN
HYPOTHESIS: Can surface-active particles be designed à la carte just by incorporating functional groups mimicking the structure of the solvent and gas? This is based on the idea that, to achieve good foamability, the particle wettability needs to be finely tuned to adjust the liquid-particle and gas-particle surface tensions. In practice, could particles containing phenyl rings and alkyl chains assemble at the air-liquid interface and stabilize foams based on aromatic solvents? EXPERIMENTS: A library of organosilica particles was prepared by sol-gel synthesis using aromatic organosilane precursors. The particles were characterized by TGA, FTIR and 13C/29Si MAS NMR. The foaming properties were studied after hand shaking and high-speed homogenization. The influence of particle wettability and solvent properties on foam formation was systematically investigated. A comparison was carried out between biphenyl-bridged particles and various stabilizers on foamability in benzyl alcohol. FINDINGS: Biphenyl-bridged particles could stabilize foams in aromatic solvents with a high foam volume fraction up to 96% using Ultra-Turrax. The presence of biphenyl rings and short alkyl chains was crucial for foamability. Organic foams were prepared for aromatic solvents with intermediate surface tension (35-44 mN m-1) and contact angle in the range 32-53°. Biphenyl-bridged particles outperformed polytetrafluoroethylene and fluorinated surfactants in benzyl alcohol.
RESUMEN
Oil foams stabilized by surface-active catalytic particles bearing fluorinated chains and Pd nanoparticles allowed fast and efficient aerobic oxidation of a variety of aromatic and aliphatic alcohols compared to bulk catalytic systems at ambient O2 pressure. High foam stability was achieved at low particle concentration (<1 wt %) provided that the contact angle locates in the range 41°-73°. The catalytic performance was strongly affected by the foaming properties, with 7-10 times activity increase in pure O2 compared to nonfoam systems. Intermediate foam stability was required to achieve good catalytic activity, combining large interfacial area and high gas exchange rate. Particles were conveniently recycled with high foamability and catalytic efficiency maintained for at least seven consecutive runs.
RESUMEN
Pickering emulsions, foams, bubbles, and marbles are dispersions of two immiscible liquids or of a liquid and a gas stabilized by surface-active colloidal particles. These systems can be used for engineering liquid-liquid-solid and gas-liquid-solid microreactors for multiphase reactions. They constitute original platforms for reengineering multiphase reactors towards a higher degree of sustainability. This Review provides a systematic overview on the recent progress of liquid-liquid and gas-liquid dispersions stabilized by solid particles as microreactors for engineering eco-efficient reactions, with emphasis on biobased reagents. Physicochemical driving parameters, challenges, and strategies to (de)stabilize dispersions for product recovery/catalyst recycling are discussed. Advanced concepts such as cascade and continuous flow reactions, compartmentalization of incompatible reagents, and multiscale computational methods for accelerating particle discovery are also addressed.
RESUMEN
The catalytic hydroarylation of nonactivated alkenes with aniline is a reaction of high interest, aiming at providing C-functionalized aniline derivatives that are important precursors for the fabrication of polyurethanes. However, this reaction remains a longstanding goal of catalysis, as it requires one to simultaneously address two important goals: (1) the very low reactivity of nonactivated alkenes and (2) control of the hydroarylation/hydroamination selectivity. As a result, the hydroarylation of aniline is mostly restricted to activated alkenes (i.e., featuring ring strain, conjugation, or activation with electron-donating or -withdrawing groups). Here we show that the combination of bismuth triflate and hexafluoroisopropanol (HFIP) leads to the formation of highly active catalytic species capable of promoting the hydroarylation of various nonactivated alkenes, such as 1-octene, 1-heptene, and 1-undecene, among others, with aniline with high selectivity (71-92%). Through a combined experimental and computational investigation, we propose a reaction pathway where HFIP stabilizes the rate-determining transition state through a H-bond interaction with the triflate anion, thus assisting the acid catalyst in the hydroarylation of nonactivated alkenes. From a practical point of view, this work opens a catalytic access to C-functionalized aniline derivatives from two cheap and abundant feedstocks in a 100% atom-economical fashion.
RESUMEN
Acceptorless dehydrogenation into carbonyls and molecular hydrogen is an attractive strategy to valorize (biobased) alcohols. Using 2-octanol dehydrogenation as benchmark reaction in a continuous reactor, a library of metal-supported catalysts is tested to validate the predictive level of catalytic activity for combined DFT and micro-kinetic modeling. Based on a series of transition metals, scaling relations are determined as a function of two descriptors, i.e. the surface binding energies of atomic carbon and oxygen. Then, a volcano-shape relation based on both descriptors is derived, paving the way to further optimization of active catalysts. Evaluation of 294 diluted alloys but also a series of carbides and nitrides with the volcano map identified 12 promising candidates with potentially improved activity for alcohol dehydrogenation, which provides useful guidance for experimental catalyst design. Further screening identifies ß-Mo2N and γ-Mo2N exposing mostly (001) and (100) facets as potential candidates for alcohol dehydrogenation.
RESUMEN
The production of amine intermediates from biomass is capturing increasing attention. Herein, a simple and efficient preparation of l furan-derived amines was developed [e.g., 1-(furan-2-yl)-4-methylpentan-2-amine] with high yield (up to 95 %) from (E)-1-(furan-2-yl)-5-methylhex-1-en-3-one. The catalyst used was Ru/C, and it was recyclable up to the fourth cycle. To further realize cost-efficiency, a one-reactor tandem concept was attempted. To this aim direct reaction from furfural was investigated. A high yield (74 %) towards 1-(furan-2-yl)-4-methylpentan-2-amine could be achieved starting directly from furfural in the presence of methyl isobutyl ketone, NH3 , H2 , and Ru/C catalyst.
RESUMEN
We disclose in this study a Ni6AlO x catalyst prepared by coprecipitation for the reductive amination of biomass-derived aldehydes and ketones in aqueous ammonia under mild reaction conditions. The catalyst exhibited 99% yield toward 5-aminomethyl-2-furylmethanol in the reaction of 5-hydroxymethyl furfural with ammonia at 100 °C for 6 h under 1 bar H2. The catalyst was further extended to the reductive amination of a library of aromatic and aliphatic aldehydes and ketones with a yield in the range 81-90% at optimized reaction conditions. Besides, 5-hydroxymethylfurfural could react with a library of primary and secondary amines with yields in the range 76-88%. The catalyst could be easily recycled and reused without apparent loss of activity in four consecutive runs.
RESUMEN
Supramolecular preorganization and interfacial recognition can provide useful architectures for colloidal building. To this aim, a novel approach, based on colloidal tectonics involving two surface-active particles containing both recognition and catalytic sites, has been developed for controlling the formation and the properties of Pickering emulsions. This was illustrated by the combination of dodecyltrimethylammonium phosphotungstate nanoparticles, [C12]3[PW12O40], and silica particles functionalized with alkyl and sulfonic acid groups, [C n /SO3H]@SiO2. The interfacial self-assembly occurs by the penetration of the alkyl chains of [C n /SO3H]@SiO2 into the [C12]3[PW12O40] supramolecular porous structure constituted of polar and apolar regions. The emulsions were used as a non-nitric acid route for adipic acid synthesis from the one-pot oxidative cleavage of cyclohexene oxide with aqueous H2O2. The catalytic performance was significantly boosted due to the synergistic interactions between the particles.
RESUMEN
Pickering emulsions offer a promising platform for conducting interfacial reactions between immiscible reagents. Despite the significant progress in the engineering of amphiphilic catalysts for such reactions, the mechanism behind their enhanced activity is still poorly understood. Herein, using the glycerol/dodecanol system as a case study, we conducted a combined meso- and microscale study of Pickering emulsions stabilized by amphiphilic silica nanoparticles bearing acid centers by marrying dissipative particle dynamics simulations with emulsification experiments. The optimal surface properties of the silica particles in terms of length and density of alkyl chains were identified, matching the experimental results. The local distribution of glycerol and dodecanol near the acid centers was ascertained, unraveling potential reactivity zones near the catalytic acid centers due to an enhanced nanomixing between glycerol and dodecanol.
RESUMEN
A key demand in biomass conversion is how to achieve high reactivity with immiscible reagents with the use of neither cosolvents nor additives. Pickering interfacial catalysis encompassing the design of amphiphilic catalysts behaving concomitantly as emulsifiers offers an elegant solution. In this study, we prepared a systematic series of amphiphilic Aquivion-carbon composites by the hydrothermal carbonization of guar gum with Aquivion perfluorosulfonic superacid. By tuning the Aquivion-carbon composition, materials with tunable hydrophilic-lipophilic properties could be prepared, showing high versatility for conducting biphasic reactions without stirring. In particular, an optimal formulation based on 5:1 Aquivion-carbon could be developed, showing high activity in the transesterification reaction of glyceryl trioleate with methanol at 100 °C with good reusability due to the genesis of stable Pickering emulsions.
RESUMEN
Among the best-performing homogeneous catalysts for the direct amination of activated secondary alcohols with electron-poor amine derivatives, metal triflates, such as aluminum triflate, Al(OTf)3 , stand out. Herein we report the extension of this reaction to electron-rich amines and activated primary alcohols. We provide detailed insight into the structure and reactivity of the catalyst under working conditions in both nitromethane and toluene solvent, through experiment (cyclic voltammetry, conductimetry, NMR spectroscopy), and density functional theory (DFT) simulations. Competition between aniline and benzyl alcohol for Al in the two solvents explains the different reactivities. The catalyst structures predicted from the DFT calculations were validated by the experiments. Whereas a SN 1-type mechanism was found to be active in nitromethane, we propose a SN 2 mechanism in toluene to rationalize the much higher selectivity observed when using this solvent. Also, unlike what is commonly assumed in homogeneous catalysis, we show that different active species may be active instead of only one.
RESUMEN
2,5-furandialdehyde (DFF) was synthesized by electrogenerative oxidation of 5-hydroxymethylfurfural (HMF) over a PtRu catalyst with 89 % selectivity at 50 °C after 17â h. This approach opens an avenue for a selective, energy-efficient and green oxidation of biomass-derived platform alcohols to added-value chemicals.
RESUMEN
Rational design of the surface properties of heterogeneous catalysts can boost the interfacial activity in biphasic reactions through the generation of Pickering emulsions. This concept, termed Pickering interfacial catalysis (PIC), has shown promising credentials in acid-catalyzed transesterification, ester hydrolysis, acetalization, etherification, and alkylation reactions. PIC has now been applied to the efficient, solvent-free hydrolysis of the triglyceride glyceryl trilaurate to lauric acid, catalyzed by Aquivion perfluorosulfonic superacid at mild conditions (100 °C and ambient pressure).