Microbiota Association and Profiling of Gingival Sulci and Root Canals of Teeth with Primary or Secondary/Persistent Endodontic Infections.

INTRODUCTION: Microbiota associated with primary endodontic infection (PEI) and secondary/persistent endodontic infection (SPEI) must be characterized to elucidate pathogenesis in apical periodontitis and bacterial biomarkers identified for diagnostic and therapeutic applications. METHODS: This study analyzed the microbial community profiles of root canals and gingival sulci (sulcus-E) for teeth with PEI (n = 10) or SPEI (n = 10), using the Illumina MiSeq platform. Bacterial samples from gingival sulci (sulcus-C) of healthy contralateral teeth served as controls. RESULTS: There were 15 phyla, 177 genera, and 340 species identified. The number and diversity of bacteria in root canals did not differ significantly between PEI and SPEI. Proteobacteria, Firmicutes, Fusobacteria, Bacteroidetes, and Actinobacteria were the dominant phyla in both groups. At the genus level, Lancefieldella, Bifidobacterium, Stomatobaculum, and Schaalia were enriched in root canals with SPEI. Of significance, Lancefieldella was observed in both root canals and sulcus-E of teeth with SPEI. At the species level, Neisseria macacae, Streptococcus gordonii, Bifidobacterium dentium, Stomatobaculum longum, and Schaalia odontolytica were increased significantly in root canals with SPEI compared to PEI. Oribacterium species, Streptococcus salivarius, Lancefieldella parvula, Prevotella denticola, and Oribacterium asaccharolyticum were more abundant in sulcus-E of teeth with SPEI compared to PEI. CONCLUSIONS: There were distinctive and differing predominant bacterial species associated with the root canals and gingival sulci between teeth with PEI and SPEI. Specific bacteria identified in sulcus-E and root canals of teeth with SPEI could serve as noninvasive diagnostic biomarkers for detecting SPEI.

Endodontic Microsurgery Outcomes over 10 Years and Associated Prognostic Factors: A Retrospective Cohort Study.

INTRODUCTION: This retrospective cohort study aimed to evaluate long-term healing outcomes (10-17.5 years) after contemporary endodontic microsurgery (EMS) and identify the associated prognostic factors. METHODS: Clinical and radiographic data of an EMS cohort (2006-2013) from the electronic database of the dental hospital were reviewed retrospectively by 2 independent examiners to determine their survival and healing outcomes, and potential prognostic factors were analyzed by Cox proportional hazards regression and logistic regression (α = 0.05). RESULTS: Through strict inclusion and exclusion criteria and 721 EMS-treated teeth in the cohort, 309 (42.9%) were included (male = 35.0%; female = 65.0%; age = 45.83 ± 15.53 years) with a mean final follow-up of 152.26 ± 26.37 months (range, 120-211 months; median = 148 months). Clinical and radiographic assessments found an 80.5% 10-year survival rate with 63.4% of success. Collectively, tooth type, tooth mobility, preoperative lesion size, clinical crown-to-root ratio, and crown restorations at follow-up were significantly associated with long-term success and survival over 10 years. CONCLUSIONS: The preoperative status and condition of the tooth including its alveolar bone support and adequate full-crown restorations may be relevant prognostic determinants of success and survival after EMS over time.

Stress Distribution on Trephine-Resected Root-end in Targeted Endodontic Microsurgery: A Finite Element Analysis.

INTRODUCTION: This study aimed to determine if stress distribution from occlusal loads after targeted endodontic microsurgery (TEMS) differed for trephine-resected flat and curved root-ends, with and without bone graft. METHODS: Finite element analysis models were constructed from cone-beam computed tomography data of a TEMS-treated maxillary central incisor. Models included flat and curved resected root-ends, with and without apical bone graft, and normal or root canal filled controls. In centric occlusion, axial force was directed on mesial and distal lingual marginal ridges at 120° angle. For lateral excursion, additional mesiodistal forces were applied from centric occlusion. For edge biting, axial force was directed on the incisal edge. Under occlusal loads, stress distribution patterns on tooth and root-end circumference were analyzed. RESULTS: In normal and root filled controls, occlusal stress was distributed on labial and palatal root surfaces, concentrated in the labial cervical area, and maximized at the apex. For resected root-ends, occlusal loads concentrated stress on the labial cervical area. With bone graft, maximum stress concentration shifted to the apex, which implied stress relief and dispersion from the cervical root area. Stress patterns on the root-end were more widely spread in models with apical bone graft, whereas curved root-end showed stress concentrating arc especially when without apical bone support. The mean stress values on root-end circumference were significantly higher in curved than flat root-end (P < .05), especially with apical bone support (P < .05). CONCLUSIONS: Occlusal stress patterns on a maxillary central incisor were markedly affected by root-end resection configuration and apical bone support. Trephine-resected curved root-end had stress pattern concentrated on its circumference. Curved and flat root-ends had labial cervical stress that was relieved by bone graft. TEMS resected root-ends should be flattened and bone grafted to disperse stress from occlusal loads.

Evolutionary trends in human mandibles and dentition from Neolithic to current Chinese.

OBJECTIVES: This study aimed to systematically compare Neolithic mandibles and dentition with modern Chinese, and thereby discern human evolutionary trends. MATERIALS AND METHODS: Neolithic remains of 45 adults unearthed at the Zhangqiu Jiaojia site, were compared with clinical records of 48 patients at Shandong University. All samples were scanned by cone beam computed tomography (CBCT) using identical parameters. Digital imaging and communications in medicine images were collected, three-dimensional models reconstructed, and morphology measurements obtained using Mimics software. RESULTS: Neolithic mandibles were significantly larger in their vertical and sagittal dimensions (P < .05), but similar in horizontal width to modern humans. Their condyles had fewer bird beak and crooked finger shaped morphologies than modern mandibles (P < .05). Neolithic third molars were more often erupted than in modern mandibles, and their Position A, class I and II, and vertical impactions were more common (P < .05). Neolithic teeth were generally smaller in crown lengths and in cross-sectional areas, than their modern counterparts (P < .05). CONCLUSIONS: Neolithic mandibles were larger than modern humans, who have refined diets and mandibular atrophy. They had fewer abnormally shaped condylar morphologies, and much fewer third molar impactions than in modern humans. However, modern dentition particularly their crowns are larger, likely through genetic influx from migrations.

Maxillary molar root and canal morphology of Neolithic and modern Chinese.

OBJECTIVE: This study aimed to characterize Neolithic human maxillary molars from archeological remains at the Jiaojia site, Shandong, China, and compare their ultrastructural features with sex and age-matched modern locals. DESIGN: Maxillary first (n = 86) and second (n = 80) molars in 5000-year-old individuals (n = 50) from the Jiaojia site were scanned by cone-beam computed tomography (CBCT). Sex and age-matched control groups were assigned from oral surgical patients at Shandong University. Images were analyzed for crown size, root length, root morphology, canal inter-orifice distances, mesiobuccal canal morphology, and second mesiobuccal (MB2) canal prevalence and location. Neolithic and modern values were compared statistically using Chi-squared and Mann-Whitney test at p < .05. RESULTS: Crown and root size were smaller, and canal inter-orifice distances were shorter in Neolithic maxillary molars than their modern counterparts. For mesiobuccal roots, Weine's Type I single canals were the most prevalent in Neolithic and modern first and second molars. MB2 canal prevalence were not significantly different (p > .05) in Neolithic (53.3%) or modern (60.5%) first molars, and Neolithic (11.3%) or modern (21.3%) second molars. But, MB2 prevalence was significantly higher for modern than ancient male first (p = .032) and second (p = .005) molars. Additionally, MB2 were located more mesially and closer to MB1 in Neolithic than modern molars. CONCLUSIONS: Maxillary molar root and canal morphology of ancient 5000-year-old remains at the Jiaojia site resemble that of local patients. A trend towards larger tooth size, and more dispersed MB2 canals over this short evolutionary period warrants additional investigation.

Root canals shaped by nickel-titanium instrumentation with automated computerized numerical control systems.

BACKGROUND: To investigate the efficacy of a nickel-titanium (NiTi) file with an automated computerized numerical control (CNC) system for root canal shaping. METHODS: The movement of the automated device and the insertion angle were investigated. In Experiment 1, simulated resin root canals were randomly divided into four groups (n = 20): manual downward movement using a handpiece (Group 1), vertical downward movement by CNC (Group 2), reciprocating up and down movement by CNC (Group 3), and spiral up and down movement by CNC (Group 4). In Experiment 2, five different insertion angles of the NiTi file were evaluated (n = 20). Four parameters were used to evaluate the shaping ability: change in the working length, central axis offset, curvature variation, and preparation time. Groups were compared using one-way analysis of variance (ANOVA) with significance was set at P < 0.05. RESULTS: The change in central axis position in the curved part of the root canal was found to be smaller in Group 4 than in other groups (P < 0.05). The curvature changes and preparation time of Groups 1 and 4 were significantly reduced compared with Groups 2 and 3 (P < 0.05). The variation in working length and curvature in the 5° insertion angle group was significantly smaller than in the other groups (P < 0.05). CONCLUSIONS: A spiral up and down movement, controlled by the CNC machine, and 5° insertion angle, maintained original root canal shape more precisely than other methods.

Neighborhood Contexts and Oral Health Outcomes in a Pediatric Population: An Exploratory Study.

AIMS: This study aimed to explore the impacts of neighborhood-level socioeconomic contexts on the therapeutic and preventative dental quality outcome of children under 16 years. MATERIALS AND METHODS: Anonymized billing data of 842 patients reporting to a university children's dental over three years (March 2017-2020) met the inclusion criteria. Their access to care (OEV-CH-A), topical fluoride application (TFL-CH-A) and dental treatment burden (TRT-CH-A) were determined by dental quality alliance (DQA) criteria. The three oral health variables were aggregated at the neighborhood level and analyzed with Canadian census data. Their partial postal code (FSA) was chosen as a neighborhood spatial unit and maps were created to visualize neighborhood-level differences. RESULTS: The individual-level regression models showed significant negative associations between OEV-CH-A (p = 0.027) and TFL-CH-A (p = 0.001) and the cost of dental care. While there was no significant association between neighborhood-level sociodemographic variables and OEV-CH-A, TRT-CH-A showed a significant negative association at the neighborhood level with median household income and significant positive association with percentage of non-official first language (English or French) speakers. CONCLUSION: Initial analysis suggests differences exist in dental outcomes according to neighborhood-level sociodemographic variables, even when access to dental care is similar.

Characterization of Histopathology and Microbiota in Contemporary Regenerative Endodontic Procedures: Still Coming up Short.

INTRODUCTION: This study aimed to investigate microbiota and the histopathology of infected immature teeth microenvironments after disinfection with calcium hydroxide, triple antibiotic paste, and a synthetic antimicrobial peptide (synthetic human beta-defensin-3-C15) for regenerative endodontic procedures (REPs). The null hypothesis was that there is no difference among intracanal medications on disinfection in REPs. METHODS: Pulp necrosis and periapical lesions were induced in immature beagle dog premolars. Block randomized teeth were uninfected (negative control, n = 6), left infected (positive control, n = 6), or medicated with a disinfectant (n = 6/group). After disinfection (2 weeks), teeth were reaccessed, irrigated with 17% EDTA, blood clot induced, sealed with ProRoot MTA (Dentsply Tulsa Dental, Tulsa, OK), and restored with resin-modified glass ionomer. Animals were monitored radiographically and euthanized (12 weeks) for histopathologic and metagenomic analyses. RESULTS: REP-treated roots showed radiographic repair of periapical radiolucency (67.65%, 23/34), continued root development (73.53%, 25/34), and apical closure (70.59%, 24/34) regardless of the disinfectant used (P > .05). Canal microenvironments histologically devoid of bacteria contained new mineralized and pulp-like tissues in characteristic patterns that varied by disinfectant. Next-generation sequencing (16S ribosomal RNA) identified Firmicutes, Proteobacteria, Actinobacteria, and Bacteroidetes as dominant phyla of microbiota in immature teeth. Infection-induced teeth showed changes in diversity and richness of microbiota from negative controls. Compared with positive controls, all treated teeth exhibited depleted operational taxonomic units, with lower phylogenic diversity from synthetic human beta-defensin-3-C15-treated teeth. CONCLUSIONS: There were no differences among the medicaments investigated in radiologic treatment outcomes, but disinfectants in REPs showed altered microbiota from normal and diseased immature teeth with different histologic patterns of regeneration.

Internal Resorption of Multiple Posterior Teeth in a Patient Diagnosed with Hyperparathyroidism: A Case Report.

This case reports a 46-year-old man with end-stage renal disease and internal resorption (IR) affecting multiple posterior teeth. IR involves odontoclast's removal of dentin within pulp chambers and root canal space. Typically, asymptomatic until detected on radiographs, IR is relatively rare, so the etiology and pathogenesis are poorly understood. Patients' radiographs with cone-beam computed tomography revealed extensive IR in multiple premolars and all remaining molar teeth. Blood tests and hormonal assay measured elevated phosphorus and parathyroid hormone levels consistent with secondary hyperparathyroidism. Histopathology showed highly vascularized and inflamed pulp tissues with numerous odontoclast-like multinucleated giant cells along dentinal walls and in resorption lacunae. Immunohistochemistry showed that multinucleated giant cells and adjacent mononuclear precursors stained strongly for tartrate-resistant acid phosphatase like osteoclasts. Extraction of crown-root fractures and endodontic treatment with crown restorations for all IR teeth effectively arrested disease progression at 9 months' follow-up. Elevated parathyroid hormone from secondary hyperparathyroidism that promotes bone osteoclast activity may also stimulate odontoclasts causing IR.

Guidance for dental treatment of patients with disabilities during COVID-19 pandemic.

People with disabilities are challenged managing their oral hygiene and more often burdened with oral diseases. They often require immediate dental treatment for severe pain and greater precautions are needed to cope with COVID-19. The potential for COVID-19 infection can be relatively high in patients with disabilities due to concomitant systemic diseases, unique individual circumstances, relationship with caregivers and the living conditions of long-term care facilities, which make them vulnerable to the virus. For behavior management, dental treatment is often provided under general anesthesia with meticulous preoperative evaluation and the use of high-quality viral filters. In response to COVID-19, additional considerations should be taken for dental procedures on patients with special needs. These recommendations for dental treatment of the disabled are based on 6 months of authors COVID-19 pandemic experience.

Candida albicans Virulence Factors and Pathogenicity for Endodontic Infections.

Candida albicans (C. albicans) is the fungus most frequently isolated from endodontic root canal infections. Although recognized by dental pulp and periradicular tissue cells that elicit immune responses, it eludes host defenses and elicits cell death. Then, C. albicans binds tooth dentin, forms biofilms, and invades dentinal tubules to resist intracanal disinfectants and endodontic treatments. Insensitive to most common medicaments, it survives sequestered within biofilms and intratubular dentin. Thus, C. albicans has been associated with cases of persistent or refractory root canal infections. Its treatment strategies may require alternative intracanal irrigants, intracanal medicaments such as chlorhexidine gel or human beta defensin-3 (HBD3), Ca-Si-based obturating materials, and microsurgical procedures.

Prognostic Factors of Long-Term Outcomes in Endodontic Microsurgery: A Retrospective Cohort Study over Five Years.

The aim of this study was to analyze the long-term outcomes of endodontic microsurgeries in a cohort and identify their association with prognostic factors. A cohort of endodontic microsurgeries followed up periodically with complete clinical and radiographic records for at least 5 years were reviewed retrospectively. Their survival and healing status and profile characteristics were analyzed by Pearson chi-square test and logistic regression (α = 0.05) to identify prognostic factors that influenced outcomes. Of 652 cases in the cohort, 225 (34.5%) were included. The mean follow-up period was 90.4 months (range, 60-168 months). The long-term success rate was 80.5%, and the 5-year survival rate was 83.5%. Logistic regression showed higher success in anteriors compared to molars (OR = 5.405, (95% CI, 1.663-17.571; p = 0.005)) and in teeth with crown restorations (OR = 10.232, (95% CI, 3.374-31.024; p < 0.001)). Conversely, lower success was found in teeth with periodontal disease (OR = 0.170, (95% CI, 0.032-0.900; p = 0.037)) and maxillary sinus involvement (OR = 0.187, (95% CI, 0.035-0.994; p = 0.049)). Endodontic microsurgery has a highly favorable long-term outcome. Tooth position, crown restoration, periodontal disease, and maxillary sinus involvement were identified as main prognostic factors.

Mandibular molar C-shaped root canals in 5th millennium BC China.

OBJECTIVE: The aim of this study was to analyze the occurrence and variations in C-shaped canals in ancient Chinese teeth and compare the differences of these features between ancient and age-matched modern populations. DESIGN: Approximately 5000-year-old craniofacial bone remains were collected from the fossils of 38 individuals (total: 68 mandibular second molars) excavated from the Jiaojia site. The control group comprised of an equal number of randomly selected modern samples. We used cone-beam computed tomography to scan the mandible along the apex-crown axis and analyzed the canal morphology, based on Fan's categorization criterion, at 2 mm, 5 mm, and 8 mm to the apical level. Grooves on the lingual and buccal sides were also recorded. RESULTS: The proportion of C-shaped roots among ancient samples on the left and right sides were 48.57 % (17/35 teeth) and 54.55 % (18/33 teeth), respectively, and 51.47 % (35/68 teeth) in the total sample. Conversely, in the control group, 44.12 % (15/34) and 38.24 % (13/34) occurred on the left and right sides, respectively, and 41.18 % (28/68) in the total sample. Among the C-shaped canals from the Jiaojia site samples, the classification type changed between two adjacent levels in 84.31 % of samples. Approximately 35 (51.5 %) teeth had a fused root, 20 (29.41 %) had one shallow buccal and one deep lingual groove. The occurrence of C-shape variation was not significantly correlated with time (p＞0.05). CONCLUSIONS: This study identified a high rate of C-shaped root canals among individuals of Jiaojia who lived approximately 5000 years ago.

Morphological measurements of two separate mesiobuccal canals in maxillary first molars using micro-computed tomography.

OBJECTIVES: To obtain radicular measurements of two separate mesiobuccal (MB) root canals in maxillary first molars using micro-computed tomography (µCT) with customized software. MATERIALS AND METHODS: Human maxillary first molar MB roots (N = 36) with two separate canals (MB1, MB2) and apical foramina were scanned by µCT and analyzed with Kappa2 software to reconstruct three-dimensional (3D) surface models of roots and canals. These models were sectioned at 0.1 mm intervals perpendicular to the central axis of each canal. Canal widths, 3D curvatures, and surrounding dentine thicknesses were measured concurrently on each section. Dentine thicknesses were analyzed statistically for differences between each direction and the different levels of both canals. RESULTS: Dentine walls around MB1 were thicker than MB2 (p < 0.05). Thinnest dentine was most often located at disto-inside direction in both canals. Canal widths were significantly smaller in MB2 than MB1 (p < 0.01). Apical constrictions were smaller (p < 0.05) and further (p < 0.05) from the apex in MB2 than MB1. Canal curvatures were greatest in the apical third of both canals (p < 0.001), and they were greater in MB2 than MB1 (p < 0.05). CONCLUSIONS: MB2 canals had shorter lengths, smaller widths, and more severe curvatures and were surrounded by thinner dentine walls. In MB2, apical constrictions were between 1 and 2 mm from the apex, compared to about 1 mm for MB1. CLINICAL RELEVANCE: These detailed measurements and in-depth 3D analyses of maxillary first molar MB roots with two separate canals and apical foramina provide morphologic references for root canal therapy.

Lactobacillus plantarum lipoteichoic acid disrupts mature Enterococcus faecalis biofilm.

Apical periodontitis is caused by biofilm-mediated root canal infection. Early phase oral bacterial biofilms are inhibited by Lactobacillus plantarum lipoteichoic acid (Lp.LTA). However, mature biofilms that develop over 3 weeks are more resistant to traditional endodontic medicaments. Therefore, this study examined the effectiveness of Lp.LTA on disrupting mature Enterococcus faecalis biofilms, and on enhancing the effects of endodontic medicaments. LTA was purified from L. plantarum through butanol extraction followed by hydrophobic and ion-exchange chromatography. E. faecalis biofilms were formed over 3 weeks on glass bottom dishes and in dentin blocks obtained from human single-rooted premolars. These mature biofilms were treated with or without Lp.LTA for 1 h, followed by additional treatment with either chlorhexidine digluconate (CHX), calcium hydroxide (CH), or triple antibiotics for 24 h. Biofilms on glass were live/dead stained and quantified by ZEN through confocal laser microscopy. Bio-films in dentin were fixed, sputter coated and analyzed by ImageJ with scanning electron microscopy. Preformed E. faecalis mature biofilms on the culture dishes were dose-dependently disrupted by Lp.LTA. Lp.LTA potentiated the effects of CHX or CH on the disruption of mature biofilm. Interestingly, CHX-induced disruption of preformed E. faecalis mature biofilms was synergistically enhanced only when pre-treated with Lp.LTA. Furthermore, in the dentin block model, Lp.LTA alone reduced E. faecalis mature biofilm and pre-treatment with Lp.LTA promoted the anti-biofilm activity of CHX. Lp.LTA could be an anti-biofilm or supplementary agent that can be effective for E. faecalis-biofilm-induced diseases.

Bending resistance and cyclic fatigue resistance of WaveOne Gold, Reciproc Blue, and HyFlex EDM instruments.

BACKGROUND/PURPOSE: Several single-file systems manufactured using different heat treatment and operated by different kinematics have been released. This study compared the bending resistance and cyclic fatigue resistance of three NiTi files, and examined their phase-transformation behavior. MATERIALS AND METHODS: WaveOne Gold Primary (WOG), Reciproc Blue R25 (RPB), and HyFlex EDM OneFile (HDM) were tested (N = 40/instrument). A vertical load was applied to a point 3 mm from the tip, and the stress was measured until a displacement of 3 mm. Tests were conducted at either room temperature (RT: 22 °C) or body temperature (BT: 37 °C) (n = 10). Cyclic fatigue resistance tests were performed in an artificial canal, which had a curvature angle of 40° and a 5-mm radius. Tests were conducted at either RT or BT (n = 10). Instruments were operated according to the manufacturers' instructions. Test results were analyzed using the Kruskal-Wallis and the Mann-Whitney tests. Additional three instruments of each brand were subjected to differential scanning calorimetry (DSC). RESULTS: At RT the bending resistance of three files were not significantly different. However, at BT the bending resistance of RPB was highest, followed by WOG, and HDM (P < 0.05). At RT, RPB demonstrated the longest fracture time, followed by HDM, and WOG (P < 0.05). At BT, HDM had the longest fracture time, followed by RPB, and WOG (P < 0.05). The WOG, RPB consisted of austenite in a considerable proportion, whereas HDM was mainly martensite state at BT. CONCLUSION: HDM presented superior flexibility and cyclic fatigue resistance at BT.

Synthetic Human ß Defensin-3-C15 Peptide in Endodontics: Potential Therapeutic Agent in Streptococcus gordonii Lipoprotein-Stimulated Human Dental Pulp-Derived Cells.

Human ß defensin-3-C15, an epithelium-derived cationic peptide that has antibacterial/antifungal and immuno-regulatory properties, is getting attention as potential therapeutic agent in endodontics. This study aimed to investigate if synthetic human ß defensin-3-C15 (HBD3-C15) peptides could inhibit inflammatory responses in human dental pulp cells (hDPCs), which had been induced by gram-positive endodontic pathogen. hDPC explant cultures were stimulated with Streptococcus gordonii lipoprotein extracts for 24 h to induce expression of pro-inflammatory mediators. The cells were then treated with either HBD3-C15 (50 µg/mL) or calcium hydroxide (CH, 100 µg/mL) as control for seven days, to assess their anti-inflammatory effects. Quantitative RT-PCR analyses and multiplex assays showed that S. gordonii lipoprotein induced the inflammatory reaction in hDPCs. There was a significant reduction of IL-8 and MCP-1 within 24 h of treatment with either CH or HBD3-C15 (p < 0.05), which was sustained over 1 week of treatment. Alleviation of inflammation in both medications was related to COX-2 expression and PGE2 secretion (p < 0.05), rather than TLR2 changes (p > 0.05). These findings demonstrate comparable effects of CH and HDB3-C15 as therapeutic agents for inflamed hDPCs.

Torsional and Bending Properties of V Taper 2H, ProTaper NEXT, NRT, and One Shape.

Nickel-titanium (NiTi) rotary files have enabled efficient root canal preparations that maintain the canal center with fewer aberrations compared to hand files. However, NiTi rotary files are susceptible to fracture, which can thereby compromise root canal treatment. Therefore, NiTi files have been developed to enhance fracture resistance by modifying design and thermal treatment. The objective of this study was to compare the torsional fatigue resistance and bending resistance of NiTi files manufactured from different alloys and treatments. ProTaper NEXT X2 (PTN; M-wire), V taper 2H (V2H; controlled memory wire), NRT (heat-treated), and One Shape (OS; conventional alloy) instruments of tip size #25 were compared. Torsional fatigue was evaluated by embedding the 3 mm tip of each instrument (N = 10/brand) in resin and the repetitive application of torsional stress (300 rpm, 1.0 N·cm) by an endodontic motor with autostop when the file fractured. The number of loading cycles to fracture was recorded and analyzed by Kruskal-Wallis and Mann-Whitney U tests with Bonferroni's correction. Bending resistance of the instruments was tested using a cantilever bending test to the 3 mm point from the tip (N = 10/brand). The stress was measured when deflection of 3 mm was subjected and statistically analyzed with a one-way analysis of variance and Tukey's honest significance difference test (α = 0.05). V2H withstood the highest number of load applications during torsional fatigue testing (p < 0.05), followed by NRT, PTN, and OS, where the differences between NRT and PTN (p=0.035) and between PTN and OS (p=0.143) were not statistically significant. V2H showed the lowest bending stiffness, followed by NRT, PTN, and OS (p < 0.001). Thermal treatment of NiTi wire resulted in improved mechanical properties, and controlled memory wire provided improved flexibility and torsional fatigue resistance.

Endodontic biofilms: contemporary and future treatment options.

Apical periodontitis is a biofilm-mediated infection. The biofilm protects bacteria from host defenses and increase their resistance to intracanal disinfecting protocols. Understanding the virulence of these endodontic microbiota within biofilm is essential for the development of novel therapeutic procedures for intracanal disinfection. Both the disruption of biofilms and the killing of their bacteria are necessary to effectively treat apical periodontitis. Accordingly, a review of endodontic biofilm types, antimicrobial resistance mechanisms, and current and future therapeutic procedures for endodontic biofilm is provided.

Lactobacillus plantarum Lipoteichoic Acid Inhibits Oral Multispecies Biofilm.

INTRODUCTION: Apical periodontitis is an inflammatory disease in the periradicular region of teeth that results from infection by multispecies bacterial biofilm residing in the root canal system. In this study, we investigated whether Lactobacillus plantarum lipoteichoic acid (Lp.LTA) could inhibit multispecies oral pathogenic bacterial biofilm formation. METHODS: Highly pure and structurally intact Lp.LTA was purified from L. plantarum. Actinomyces naeslundii, Lactobacillus salivarius, Streptococcus mutans, and Enterococcus faecalis were co-cultured to form oral multispecies biofilm in the presence or absence of Lp.LTA on culture plates or human dentin slices. Preformed biofilm was treated with or without Lp.LTA, followed by additional treatment with intracanal medicaments such as calcium hydroxide or chlorhexidine digluconate. Confocal microscopy and crystal violet assay were performed to determine biofilm formation. Biofilm on human dentin slices was visualized with a scanning electron microscope. RESULTS: Biofilm formation of multispecies bacteria on the culture dishes was dose-dependently reduced by Lp.LTA compared with the nontreatment control group. Lp.LTA also inhibited multispecies biofilm formation on the dentin slices in a dose-dependent manner. Interestingly, Lp.LTA was shown to reduce preformed multispecies biofilm compared with the nontreatment group. Moreover, Lp.LTA potentiated the effectiveness of the intracanal medicaments in the removal of preformed multispecies biofilm. CONCLUSIONS: These results suggest that Lp.LTA is a potential anti-biofilm agent for treatment or prevention of oral infectious disease, including apical periodontitis, which is mainly caused by multispecies bacterial biofilm.