RESUMEN
Local drug delivery systems based on bioceramics ensure safe and effective treatment of bone defects and anticancer therapy. A promising drug delivery scaffold material for bone treatment applications is diopside (CaMgSi2O6) which is bioactive, degradable, and possesses drug-release ability. Currently, in vitro assessment of drug release from biomaterials is performed mostly on a 2D cell monolayer. However, to interpret and integrate biochemical signals, cells need a 3D microenvironment that provides cell-cell and cell-extracellular matrix interactions. In this regard, 3D cell models are gaining popularity. In this work, we proposed the protocol for evaluation of the effect of doxorubicin released from diopside on MG-63 cells and primary human fibroblasts in 3D culture conditions. Tissue spheroids with similar diameters were incubated with doxorubicin-loaded diopside for 72 h, the amount of diopside was calculated in accordance with the required doxorubicin concentration. We demonstrated that doxorubicin is gradually released from diopside and exhibits an activity similar to that of the pure drug at the same total concentration. It is important to note that doxorubicin was more potent on MG-63 spheroids compared to HF spheroids, which confirmed the reliability of spheroids as 3D models of tumor and healthy tissues.
Asunto(s)
Antibióticos Antineoplásicos , Doxorrubicina , Liberación de Fármacos , Esferoides Celulares , Humanos , Doxorrubicina/farmacología , Esferoides Celulares/efectos de los fármacos , Antibióticos Antineoplásicos/farmacología , Línea Celular Tumoral , Fibroblastos/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Técnicas de Cultivo Tridimensional de Células/métodosRESUMEN
Novel nanomaterials used for wound healing should have many beneficial properties, including high biological and antibacterial activity. Immobilization of proteins can stimulate cell migration and viability, and implanted Ag ions provide an antimicrobial effect. However, the ion implantation method, often used to introduce a bactericidal element into the surface, can lead to the degradation of vital proteins. To analyze the surface structure of nanofibers coated with a layer of plasma COOH polymer, fibronectin/gentamicin, and implanted with Ag ions, a new X-ray photoelectron spectroscopy (XPS) fitting method is used for the first time, allowing for a quantitative assessment of surface biomolecules. The results demonstrated noticeable changes in the composition of fibronectin- and gentamicin-modified nanofibers upon the introduction of Ag ions. Approximately 60% of the surface chemistry has changed, mainly due to an increase in hydrocarbon content and the introduction of up to 0.3 at.% Ag. Despite the significant degradation of fibronectin molecules, the biological activity of Ag-implanted nanofibers remained high, which is explained by the positive effect of Ag ions inducing the generation of reactive oxygen species. The PCL nanofibers with immobilized gentamicin and implanted silver ions exhibited very significant antipathogen activity to a wide range of Gram-positive and Gram-negative strains. Thus, the results of this work not only make a significant contribution to the development of new hybrid fiber materials for wound dressings but also demonstrate the capabilities of a new XPS fitting methodology for quantitative analysis of surface-related proteins and antibiotics.
RESUMEN
Bone implants with biocompatibility and the ability to biomineralize and suppress infection are in high demand. The occurrence of early infections after implant placement often leads to repeated surgical treatment due to the ineffectiveness of antibiotic therapy. Therefore, an extremely attractive solution to this problem would be the ability to initiate bacterial protection of the implant by an external influence. Here, we present a proof-of-concept study based on the generation of reactive oxygen species (ROS) by the implant surface in response to X-ray irradiation, including through a layer of 3 mm adipose tissue, providing bactericidal protection. The effect of UV and X-ray irradiation of the implant surface on the ROS formation and the associated bactericidal activity was compared. The focus of our study was light-sensitive Si-doped TiCaCON films decorated with Fe and Pt nanoparticles (NPs) with photoinduced antibacterial activity mediated by ROS. In the visible and infrared range of 300-1600 nm, the films absorb more than 60% of the incident light. The high light absorption capacity of TiO2/TiC and TiO2/TiN heterostructures was demonstrated by density functional theory calculations. After short-term (5-10 s) low-dose X-ray irradiation, the films generated significantly more ROS than after UV illumination for 1 h. The Fe/TiCaCON-Si films showed enhanced biomineralization capacity, superior cytocompatibility, and excellent antibacterial activity against multidrug-resistant hospital Escherichia coli U20 and K261 strains and methicillin-resistant Staphylococcus aureus MW2 strain. Our study clearly demonstrates that oxidized Fe NPs are a promising alternative to the widely used Ag NPs in antibacterial coatings, and X-rays can potentially be used in ROS-regulating therapy to suppress inflammation in case of postimplant complications.
RESUMEN
The objective of this research was to develop an environment-friendly and scalable method for the production of self-sanitizing electrospun nanofibers. This was achieved by immobilizing silver nanoparticles (Ag NPs) onto plasma-treated surfaces of biodegradable polycaprolactone (PCL) nanofibers. The plasma deposited polymer layer containing carboxyl groups played a critical role in providing a uniform distribution of Ag NPs on the nanofiber surface. Ag ions were absorbed by electrostatic interaction and then reduced under the action of UV-light. The concentration and release of Ag ions were analyzed using the EDXS/XPS and ICP AES methods, respectively. Although high levels of Ag ions were detected after 3 h of immersion in water, the material retained a sufficient amount of silver nanoparticles on the surface (~2.3 vs. 3.5 at.% as determined by XPS), and the release rate subsequently decreased over the next 69 h. The antipathogenic properties of PCL-Ag were tested against gram-negative and gram-positive bacteria, fungi, and biofilm formation. The results showed that the PCL-Ag nanofibers exhibit significant antimicrobial activity against a wide range of microorganisms, including those that cause human infections. The incorporation of Ag NPs into PCL nanofibers resulted in a self-sanitizing material that can be used in variety of applications, including wound dressings, water treatment, and air filtration. The development of a simple, scalable, and environmentally friendly method for the fabrication of these nanofibers is essential to ensure their widespread use in various industries. The ability to control the concentration and release rate of Ag ions in the PCL nanofibers will be critical to optimize their efficacy while minimizing their potential toxicity to human cells and the environment.
RESUMEN
Platelet-rich Plasma (PRP) is an ensemble of growth factors, extracellular matrix components, and proteoglycans that are naturally balanced in the human body. In this study, the immobilization and release of PRP component nanofiber surfaces modified by plasma treatment in a gas discharge have been investigated for the first time. The plasma-treated polycaprolactone (PCL) nanofibers were utilized as substrates for the immobilization of PRP, and the amount of PRP immobilized was assessed by fitting a specific X-ray Photoelectron Spectroscopy (XPS) curve to the elemental composition changes. The release of PRP was then revealed by measuring the XPS after soaking nanofibers containing immobilized PRP in buffers of varying pHs (4.8; 7.4; 8.1). Our investigations have proven that the immobilized PRP would continue to cover approximately fifty percent of the surface after eight days.
RESUMEN
The use of nanoparticles (NPs) to modify the surface of cotton fabric is a promising approach to endowing the material with a set of desirable characteristics that can significantly expand the functionality, wear comfort, and service life of textile products. Herein, two approaches to modifying the surface of hexagonal boron nitride (h-BN) NPs with a hollow core and a smooth surface by treatment with maleic anhydride (MA) and diethylene triamine (DETA) were studied. The DETA and MA absorption on the surface of h-BN and the interaction of surface-modified h-NPs with cellulose as the main component of cotton were modeled using density functional theory with the extended Perdew-Burke-Ernzerhof functional. Theoretical modeling showed that the use of DETA as a binder agent can increase the adhesion strength of BN NPs to textile fabric due to the simultaneous hydrogen bonds with cellulose and BN. Due to the difference in zeta potentials (-38.4 vs -25.8 eV), MA-modified h-BN NPs form a stable suspension, while DETA-modified BN NPs tend to agglomerate. Cotton fabric coated with surface-modified NPs exhibits an excellent wash resistance and high hydrophobicity with a water contact angle of 135° (BN-MA) and 146° (BN-DETA). Compared to the original textile material, treatment with MA- and DETA-modified h-BN NPs increases heat resistance by 10% (BN-MA fabric) and 15% (BN-DETA fabric). Cotton fabrics coated with DETA- and MA-modified BN NPs show enhanced antibacterial activity against Escherichia coli U20 and Staphylococcus aureus strains and completely prevent the formation of an E. coli biofilm. The obtained results are important for the further development of fabrics for sports and medical clothing as well as wound dressings.
Asunto(s)
Escherichia coli , Nanopartículas , Fibra de Algodón , Calor , DEET , Textiles , Antibacterianos/farmacología , Nanopartículas/química , Interacciones Hidrofóbicas e Hidrofílicas , CelulosaRESUMEN
The spread of bacterial, fungal, and viral diseases by airborne aerosol flows poses a serious threat to human health, so the development of highly effective antibacterial, antifungal and antiviral filters to protect the respiratory system is in great demand. In this study, we developed ZnO-modified polycaprolactone nanofibers (PCL-ZnO) by treating the nanofiber surface with plasma in a gaseous mixture of Ar/CO2/C2H4 followed by the deposition of ZnO nanoparticles (NPs). The structure and chemical composition of the composite fibers were characterized by SEM, TEM, EDX, FTIR, and XPS methods. We demonstrated high material stability. The mats were tested against Gram-positive and Gram-negative pathogenic bacteria and pathogenic fungi and demonstrated high antibacterial and antifungal activity.
RESUMEN
Due to its unique physical, chemical, and mechanical properties, such as a low specific density, large specific surface area, excellent thermal stability, oxidation resistance, low friction, good dispersion stability, enhanced adsorbing capacity, large interlayer shear force, and wide bandgap, hexagonal boron nitride (h-BN) nanostructures are of great interest in many fields. These include, but are not limited to, (i) heterogeneous catalysts, (ii) promising nanocarriers for targeted drug delivery to tumor cells and nanoparticles containing therapeutic agents to fight bacterial and fungal infections, (iii) reinforcing phases in metal, ceramics, and polymer matrix composites, (iv) additives to liquid lubricants, (v) substrates for surface enhanced Raman spectroscopy, (vi) agents for boron neutron capture therapy, (vii) water purifiers, (viii) gas and biological sensors, and (ix) quantum dots, single photon emitters, and heterostructures for electronic, plasmonic, optical, optoelectronic, semiconductor, and magnetic devices. All of these areas are developing rapidly. Thus, the goal of this review is to analyze the critical mass of knowledge and the current state-of-the-art in the field of BN-based nanomaterial fabrication and application based on their amazing properties.
RESUMEN
This study focused on the synthesis and characterization of pure curdlan-chitosan foams (CUR/CS), as well as foams containing Ag nanoparticles (CUR/CS/Ag), and their effect on the skin repair of diabetic mice (II type). The layer of antibacterial superabsorbent foam provides good oxygenation, prevents bacterial infection, and absorbs exudate, forming a soft gel (moist environment). These foams were prepared from a mixture of hydrolyzed curdlan and chitosan by lyophilization. To enhance the antibacterial properties, an AgNO3 solution was added to the curdlan/chitosan mixture during the polymerization and was then reduced by UV irradiation. The membranes were further investigated for their structure and composition using optical microscopy, scanning electron microscopy, energy-dispersive spectroscopy, FT-IR spectroscopy, and XPS analysis and modeling. In vivo tests demonstrated that CUR/CS/Ag significantly boosted the regeneration process compared with pure CUR/CS and the untreated control.
RESUMEN
Soft TiB2-BN-C hetero-modulus ceramics were sintered with the assistance of in-situ reactions during the hot pressing of TiN-B4C precursors. TiB2 formation was observed already after the hot pressing at 1100 °C, remaining the only phase identifiable by XRD even after sintering at 1500 °C. Analysis of reaction kinetics allows us to assume that the most probable reaction controlling stage is boron atoms sublimation and gas phase transfer from B4C to TiN. Reactive sintering route allows almost full densification of TiB2-BN-C composite ceramics at 1900 °C. The processes enable the formation of multilayer h-BN nanosheets inside the TiB2 matrix. The manufactured TiB2-33BN-13C ceramic with K1C = 5.3 MPa·m1/2 and HV = 1.6 GPa is extremely thermal shock-resistant at least up to quenching temperature differential of 800 °C. The sintered UHTC composite can be machined into complex geometry components.
RESUMEN
The COVID-19 pandemic has raised the problem of efficient, low-cost materials enabling the effective protection of people from viruses transmitted through the air or via surfaces. Nanofibers can be a great candidate for efficient air filtration due to their structure, although they cannot protect from viruses. In this work, we prepared a wide range of nanofibrous biodegradable samples containing Ag (up to 0.6 at.%) and Cu (up to 20.4 at.%) exhibiting various wettability. By adjusting the magnetron current (0.3 A) and implanter voltage (5 kV), the deposition of TiO2 and Ag+ implantation into PCL/PEO nanofibers was optimized in order to achieve implantation of Ag+ without damaging the nanofibrous structure of the PCL/PEO. The optimal conditions to implant silver were achieved for the PCL-Ti0.3-Ag-5kV sample. The coating of PCL nanofibers by a Cu layer was successfully realized by magnetron sputtering. The antiviral activity evaluated by widely used methodology involving the cultivation of VeroE6 cells was the highest for PCL-Cu and PCL-COOH, where the VeroE6 viability was 73.1 and 68.1%, respectively, which is significantly higher compared to SARS-CoV-2 samples without self-sanitizing (42.8%). Interestingly, the samples with implanted silver and TiO2 exhibited no antiviral effect. This difference between Cu and Ag containing nanofibers might be related to the different concentrations of ions released from the samples: 80 µg/L/day for Cu2+ versus 15 µg/L/day for Ag+. The high antiviral activity of PCL-Cu opens up an exciting opportunity to prepare low-cost self-sanitizing surfaces for anti-SARS-CoV-2 protection and can be essential for air filtration application and facemasks. The rough cost estimation for the production of a biodegradable nanohybrid PCL-Cu facemask revealed ~$0.28/piece, and the business case for the production of these facemasks would be highly positive, with an Internal Rate of Return of 34%.
Asunto(s)
Antivirales/química , COVID-19/prevención & control , Materiales Biocompatibles Revestidos/química , Nanofibras/química , SARS-CoV-2/química , Animales , COVID-19/transmisión , Chlorocebus aethiops , Cobre/química , Oro/química , Humanos , Poliésteres/química , Titanio/química , Células VeroRESUMEN
Redox-responsive and magnetic nanomaterials are widely used in tumor treatment separately, and while the application of their combined functionalities is perspective, exactly how such synergistic effects can be implemented is still unclear. This report investigates the internalization dynamics of magnetic redox-responsive nanoparticles (MNP-SS) and their cytotoxicity toward PC-3 and 4T1 cell lines. It is shown that MNP-SS synthesized by covalent grafting of polyethylene glycol (PEG) on the magnetic nanoparticle (MNP) surface via SS-bonds lose their colloidal stability and aggregate fully in a solution containing DTT, and partially in conditioned media, whereas the PEGylated MNP (MNP-PEG) without S-S linker control remains stable under the same conditions. Internalized MNP-SS lose the PEG shell more quickly, causing enhanced magnetic core dissolution and thus increased toxicity. This was confirmed by fluorescence microscopy using MNP-SS dual-labeled by Cy3 via labile disulfide, and Cy5 via a rigid linker. The dyes demonstrated a significant difference in fluorescence dynamics and intensity. Additionally, MNP-SS demonstrate quicker cellular uptake compared to MNP-PEG, as confirmed by TEM analysis. The combination of disulfide bonds, leading to faster dissolution of the iron oxide core, and the high-oxidative potential Fe3+ ions can synergically enhance oxidative stress in comparison with more stable coating without SS-bonds in the case of MNP-PEG. It decreases the cancer cell viability, especially for the 4T1, which is known for being sensitive to ferroptosis-triggering factors. In this work, we have shown the effect of redox-responsive grafting of the MNP surface as a key factor affecting MNP-internalization rate and dissolution with the release of iron ions inside cancer cells. This kind of synergistic effect is described for the first time and can be used not only in combination with drug delivery, but also in treatment of tumors responsive to ferroptosis.
RESUMEN
Utilization of antibacterial components-conjugated nanoparticles (NPs) is emerging as an attractive strategy for combating various pathogens. Herein, we demonstrate that Ag/BN NPs and antibiotic-loaded BN and Ag/BN nanoconjugates are promising carriers to fight bacterial and fungal infections. Extensive biological tests included two types of Gram-positive methicillin-resistant Staphylococcus aureus strains (B8469 and MW2), two types of Gram-negative Pseudomonas aeruginosa strains (ATCC27853 and B1307/17), and 47 types of Escherichia coli strains (including 41 multidrug-resistant ones), as well as five types of fungal cultures: Candida albicans (candidiasis-thrush) ATCC90028 and ATCC24433, Candida parapsilosis ATCC90018, Candida auris CBS109113, and Neurospora crassa wt. We have demonstrated that, even within a single genus Escherichia, there are many hospital E. coli strains with multi-drug resistance to different antibiotics. Gentamicin-loaded BN NPs have high bactericidal activity against S. aureus, P. aeruginosa, and 38 types of the E. coli strains. For the rest of the tested E. coli strains, the Ag nanoparticle-containing nanohybrids have shown superior bactericidal efficiency. The Ag/BN nanohybrids and amphotericin B-loaded BN and Ag/BN NPs also reveal high fungicidal activity against C. albicans, C. auris, C. parapsilosis, and N. crassa cells. In addition, based on the density functional theory calculations, the nature of antibiotic-nanoparticle interaction, the sorption capacity of the BN and Ag/BN nanohybrids for gentamicin and amphotericin B, and the most energetically favorable positions of the drug molecules relative to the carrier surface, which lead to lowest binding energies, have been determined. The obtained results clearly show high therapeutic potential of the antibiotic-loaded Ag/BN nanocarriers providing a broad bactericidal and fungicidal protection against all of the studied pathogens.
Asunto(s)
Antibacterianos , Compuestos de Boro/química , Portadores de Fármacos/química , Nanopartículas/química , Plata/química , Antibacterianos/química , Antibacterianos/farmacología , Antifúngicos/química , Antifúngicos/farmacología , Bacterias/efectos de los fármacos , Candida/efectos de los fármacos , Gentamicinas/química , Gentamicinas/farmacologíaRESUMEN
In recent years, bacteria inactivation during their direct physical contact with surface nanotopography has become one of the promising strategies for fighting infection. Contact-killing ability has been reported for several nanostructured surfaces, e.g., black silicon, carbon nanotubes, zinc oxide nanorods, and copper oxide nanosheets. Herein, we demonstrate that Gram-negative antibiotic-resistant Escherichia coli (E. coli) bacteria are killed as a result of their physical destruction while contacting nanostructured h-BN surfaces. BN films, made of spherical nanoparticles formed by numerous nanosheets and nanoneedles with a thickness <15 nm, have been obtained through a reaction of ammonia with amorphous boron. The contact-killing bactericidal effect of BN nanostructures has been compared with a toxic effect of gentamicin released from them. For a wider protection against bacterial and fungal infection, the films have been saturated with a mixture of gentamicin and amphotericin B. Such BN films demonstrate a high antibiotic/antimycotic agent loading capacity and a fast initial and sustained release of therapeutic agents for 170-260 h depending on the loaded dose. The pristine BN films possess high antibacterial activity against E. coli K-261 strain at their initial concentration of 104 cells/mL, attaining >99% inactivation of colony forming units after 24 h, same as gentamicin-loaded (150 µg/cm2) BN sample. The BN films loaded with a mixture of gentamicin (150 and 300 µg/cm2) and amphotericin B (100 µg/cm2) effectively inhibit the growth of E. coli K-261 and Neurospora crassa strains. During immersion in the normal saline solution, the BN film generates reactive oxygen species (ROS), which can lead to accelerated oxidative stress at the site of physical cell damage. The obtained results are valuable for further development of nanostructured surfaces having contact killing, ROS, and biocide release abilities.
Asunto(s)
Antibacterianos/farmacología , Antifúngicos/farmacología , Compuestos de Boro/farmacología , Escherichia coli/efectos de los fármacos , Hongos/efectos de los fármacos , Antibacterianos/química , Antifúngicos/química , Compuestos de Boro/química , Pruebas de Sensibilidad Microbiana , Tamaño de la Partícula , Propiedades de Superficie , HumectabilidadRESUMEN
Due to their good mechanical stability compared to gelatin, collagen or polyethylene glycol nanofibers and slow degradation rate, biodegradable poly-ε-caprolactone (PCL) nanofibers are promising material as scaffolds for bone and soft-tissue engineering. Here, PCL nanofibers were prepared by the electrospinning method and then subjected to surface functionalization aimed at improving their biocompatibility and bioactivity. For surface modification, two approaches were used: (i) COOH-containing polymer was deposited on the PCL surface using atmospheric pressure plasma copolymerization of CO2 and C2H4, and (ii) PCL nanofibers were coated with multifunctional bioactive nanostructured TiCaPCON film by magnetron sputtering of TiC-CaO-Ti3POx target. To evaluate bone regeneration ability in vitro, the surface-modified PCL nanofibers were immersed in simulated body fluid (SBF, 1×) for 21 days. The results obtained indicate different osteoblastic and epithelial cell response depending on the modification method. The TiCaPCON-coated PCL nanofibers exhibited enhanced adhesion and proliferation of MC3T3-E1 cells, promoted the formation of Ca-based mineralized layer in SBF and, therefore, can be considered as promising material for bone tissue regeneration. The PCL-COOH nanofibers demonstrated improved adhesion and proliferation of IAR-2 cells, which shows their high potential for skin reparation and wound dressing.
RESUMEN
A new low-pressure plasma-based approach to activate the surface of BN nanoparticles (BNNPs) in order to facilitate the attachment of folate acid (FA) molecules for cancer-specific therapy is described. Plasma treatment of BNNPs (BNNPsPT) was performed in a radiofrequency plasma reactor using ethylene and carbon dioxide monomers. The carboxyl groups deposited on the surface of BNNPsPT were activated by N,N'-dicyclohexylcarbodiimide (DCC) and participated in the condensation reaction with ethylene diamine (EDA) to form a thin amino-containing layer (EDA-BNNPPT). Then, the DCC-activated FA was covalently bonded with BNNPsPT by a chemical reaction between amino groups of EDA-BNNPsPT and carboxyl groups of FA. Density functional theory calculations showed that the pre-activation of FA by DCC is required for grafting of the FA to the EDA-BNNPsPT. It was also demonstrated that after FA immobilization, the electronic characteristics of the pteridine ring remain unchanged, indicating that the targeting properties of the FA/EDA-BNNPsPT nanohybrids are preserved.
RESUMEN
A rapid increase in the number of antibiotic-resistant bacteria urgently requires the development of new more effective yet safe materials to fight infection. Herein, we uncovered the contribution of different metal nanoparticles (NPs) (Pt, Fe, and their combination) homogeneously distributed over the surface of nanostructured TiCaPCON films in the total antibacterial activity toward eight types of clinically isolated bacterial strains (Escherichia coli K261, Klebsiella pneumoniae B1079k/17-3, Acinetobacter baumannii B1280A/17, Staphylococcus aureus no. 839, Staphylococcus epidermidis i5189-1, Enterococcus faecium Ya-235: VanA, E. faecium I-237: VanA, and E. coli U20) taking into account various factors that can affect bacterial mechanisms: surface chemistry and phase composition, wettability, ion release, generation of reactive oxygen species (ROS), potential difference and polarity change between NPs and the surrounding matrix, formation of microgalvanic couples on the sample surfaces, and contribution of a passive oxide layer, formed on the surface of films, to general kinetics of the NP dissolution. The results indicated that metal ion implantation and subsequent annealing significantly changed the chemistry of the TiCaPCON film surface. This, in turn, greatly affected the shedding of ions, ROS formation, potential difference between film components, and antibacterial activity. The presence of NPs was critical for ROS generation under UV or daylight irradiation. By eliminating the potential contribution of ions and ROS, we have shown that bacteria can be killed using direct microgalvanic interactions. The possibility of charge redistribution at the interfaces between Pt NPs and TiO2 (anatase and rutile), TiC, TiN, and TiCN components was demonstrated using density functional theory calculations. The TiCaPCON-supported Pt and Fe NPs were not toxic for lymphocytes and had no effect on the ability of lymphocytes to activate in response to a mitogen. This study provides new insights into understanding and designing of antibacterial yet biologically safe surfaces.