Micro-CT Analysis of Radicular Dentin Thickness in Mandibular Second Molars Across Diverse Anatomical Root Variations: Identifying Potential Danger Zones.

INTRODUCTION: This study aimed to investigate radicular dentin thicknesses in mandibular second molars (MSMs), considering variations in root configuration and the morphology of the pulp chamber floor (PCF). The types of radicular grooves and potential danger zones were also identified. METHODS: A total of 149 MSMs were scanned with micro-CT and classified into four groups according to root fusion and PCF morphology: (1) 45 with fused roots and C-shaped PCFs; (2) 45 with fused roots and non-C-shaped PCFs; (3) 14 with a single canal; and (4) 45 with separated roots. The first two groups were subdivided into Ω-shaped, U-shaped, and V-shaped radicular groove subgroups. Measurements included minimum and mean dentin thickness from the start of the radicular groove or root bifurcation extending 5mm apically, the ratio of outer to inner dentin thickness, and the distribution of dentin thickness. RESULTS: Ω-shaped and U-shaped subgroups showed significant thinner minimum inner wall thickness than V-shaped subgroups at 2-5mm from starting point of radicular groove in both C-shaped and non-C-shaped pulp floor categories (p < 0.05). Mesial roots of separated-rooted MSMs showed significant thinner dentin than non-C-shaped floor regarding minimum and mean inner thickness and mean outer thickness (p < 0.05). Teeth with a single canal had significantly thicker walls compared to the other three groups. CONCLUSIONS: In MSMs, caution must be exercised especially in the presence of Ω-shaped and U-shaped grooves in C-shaped roots and around the root furcation of separated roots.

A Novel Coated Suture Displays Antimicrobial Activity Without Compromising Structural Properties.

BACKGROUND: Treated or coated sutures promise to prevent contamination of wounds. PURPOSE: The purpose of the study was to coat surgical sutures with a new quaternary ammonium silane (QAS) antimicrobial compound at two different application temperatures and then to evaluate the resulting structural, physical, mechanical, and biological properties. STUDY DESIGN, SETTING, SAMPLE: In vitro and in vivo studies were conducted using male albino Wistar rats approved by the Joint Ethical Committee of IMU and Postgraduate Medical Institute, Lahore. Only suture samples, coated uniformly with verified presence of the compound and of adequate length were used. Samples which were not coated uniformly and with inadequate length or damaged were excluded. PREDICTOR VARIABLE: Predictor variables were sutures with and without QAS coatings and different temperatures. Sutures were coated with QAS at 0.5 and 1.0% wt/vol using the dip coating technique and sutures with and without QAS coating were tested at 25 and 40 °C temperatures. MAIN OUTCOME VARIABLE(S): Outcome variables of structural and physico-mechanical properties of QAS-coated and non-coated sutures were measured using Fourier transform infrared spectroscopy (for structural changes), confocal laser and scanning electron (for diameter changes), and tensile strength/modulus (for mechanical testing). Biologic outcome variables were tested (bacterial viability); macrophage cultures from Wistar rats were tested (M1/M2 polarization detecting IL-6 and IL-10). Macrophage cells were analyzed with CD80+ (M1) and CD163+ (M2). Chemotaxis index was calculated as a ratio of quantitative fluorescence of cells. COVARIATES: Not applicable. ANALYSES: Ordinal data among groups were compared using the Wilcoxon Mann-Whitney U test along with the comparison of histological analysis using the Wilcoxon Sign-rank test (P < .05). RESULTS: Fourier transform infrared spectroscopy peak at 1490 cm-1 confirmed the presence of QAS on suture's surfaces with a significant increase (P < .05) in diameter (0.99 ± 0.5-mm) and weight (0.77 ± 0.02-mg) observed for 1% QAS groups treated at 40 °C. Non-coated samples heated at 25 °C had significantly (P < .05) less diameters (0.22 ± 0.03-mm) and weights (0.26 ± 0.06-mg). Highest tensile strength/modulus was observed for 0.5% QAS-coated samples which also had significantly higher antibacterial characteristics than other sutures (P < .05). QAS-coated sutures significantly increased M1 and M2 markers. CONCLUSION AND RELEVANCE: QAS coating conferred antibacterial action properties without compromising the physical and mechanical properties of the suture.

Guidelines for non-surgical root canal treatment.

Guidelines were developed by the Australian Society of Endodontology Inc. with the intent to describe relevant aspects of contemporary evidence-based root canal treatment. The document aims to support clinicians by describing a Standard of Practice in the Australian context. The presented guidelines refer to Competence criteria and Quality standards for the main steps in root canal treatment. While the intent is not to replace individual clinical decision-making, it is envisaged that these periodically reviewable guidelines may help to improve clinical outcomes.

The extended finite element method in endodontics: A scoping review and future directions for cyclic fatigue testing of nickel-titanium instruments.

OBJECTIVES: The present study reviews the current literature regarding the utilization of the extended finite element method (XFEM) in clinical and experimental endodontic studies and the suitability of XFEM in the assessment of cyclic fatigue in rotary endodontic nickel-titanium (NiTi) instruments. MATERIAL AND METHODS: An electronic literature search was conducted using the appropriate search terms, and the titles and abstracts were screened for relevance. The search yielded 13 hits after duplicates were removed, and four studies met the inclusion criteria for review. RESULTS: No studies to date have utilized XFEM to study cyclic fatigue or crack propagation in rotary endodontic NiTi instruments. Challenges such as modelling material inputs and fatigue criteria could explain the lack of utilization of XFEM in the analysis of mechanical behavior in NiTi instruments. CONCLUSIONS: The review showed that XFEM was seldom employed in endodontic literature. Recent work suggests potential promise in using XFEM for modelling NiTi structures.

Application of Nanomaterials in Endodontics.

Recent advancements in nanotechnology have introduced a myriad of potential applications in dentistry, with nanomaterials playing an increasing role in endodontics. These nanomaterials exhibit distinctive mechanical and chemical properties, rendering them suitable for various dental applications in endodontics, including obturating materials, sealers, retro-filling agents, and root-repair materials. Certain nanomaterials demonstrate versatile functionalities in endodontics, such as antimicrobial properties that bolster the eradication of bacteria within root canals during endodontic procedures. Moreover, they offer promise in drug delivery, facilitating targeted and controlled release of therapeutic agents to enhance tissue regeneration and repair, which can be used for endodontic tissue repair or regeneration. This review outlines the diverse applications of nanomaterials in endodontics, encompassing endodontic medicaments, irrigants, obturating materials, sealers, retro-filling agents, root-repair materials, as well as pulpal repair and regeneration. The integration of nanomaterials into endodontics stands poised to revolutionize treatment methodologies, presenting substantial potential advancements in the field. Our review aims to provide guidance for the effective translation of nanotechnologies into endodontic practice, serving as an invaluable resource for researchers, clinicians, and professionals in the fields of materials science and dentistry.

Exploring approaches to pulp vitality assessment: A scoping review of nontraditional methods.

INTRODUCTION: Diagnostic procedures for pulp vitality assessment are a crucial aspect of routine dental practice. This review aims to provide a comprehensive overview of nontraditional techniques and methodologies for assessing pulp vitality, specifically exploring promising approaches that are currently not used in dental practice. METHODS: The study protocol was registered a priori (https://osf.io/3m97z/). An extensive electronic search was conducted across multiple databases, including MEDLINE via PubMed, Scopus, Web of Science, and Embase. Inclusion criteria were guided by the research question based on the PCC model as follows: "What are the potential nontraditional techniques (Concept) for assessing pulp vitality (Population) in the field of endodontics or clinical practice (Context)?" Studies were included that explored possible approaches to pulp vitality assessment, utilizing a range of techniques, whilst any studies using traditional pulp tests (cold, heat, and electric stimulation) or well-known methods (pulse oximetry and laser Doppler flowmetry) were excluded. Reviewers independently screened articles and extracted data. A patent search was also performed. RESULTS: Of 3062 studies, 65 were included that described nontraditional approaches for assessing pulp vitality. These included a range of optical diagnostic methods, ultrasound Doppler flowmetry (UDF), magnetic resonance imaging (MRI), terahertz imaging, tooth temperature measurements, as well as invasive methodologies, including 133xenon washout, radioisotope-labelled tracers, hydrogen gas desaturation, intravital microscopy and fluorescent microspheres isotope clearance. The patent search included artificial intelligence and biomarkers methods. CONCLUSIONS: This review provides details for potential innovative tests that may directly describe pulp vitality. Importantly, these methods range from clinically impractical through to promising methods that may transform clinical practice. Several nontraditional techniques have the potential to enhance diagnostic accuracy and could provide valuable insights into the assessment of pulp vitality in challenging clinical scenarios.

Accuracy comparison of single- and double-sleeve endodontic guides for fiber post removal.

BACKGROUND: This study aimed to assess the accuracy of two different endodontic guides for fiber post removal. METHODS: In this in vitro study, 54 maxillary canine fiber posts were mounted on 36 maxillary stone casts; 18 teeth were mounted unilaterally, and 36 teeth were mounted bilaterally. Static endodontic guides were fabricated according to baseline cone-beam computed tomography (CBCT) and intraoral optical scans using Blue Sky software. In the single-sleeve endodontic guides group (SSG), two anterior and two posterior teeth were included in a 5-unit guide. In the double-sleeve endodontic guides group (DSG) group, the guide was passed through the midline to include both canine teeth and extended by 2 teeth posterior to the canine teeth bilaterally (a 10-unit guide). After drilling, postoperative CBCT scans were taken and superimposed on the virtually designed path, and the maximum coronal deviation (MCD) at the marginal entry point of the tooth, maximum apical deviation (MAD) at 10 mm apical to the tooth margin, and maximum angular deflection (MAnD) of the drill were calculated. RESULTS: The mean MCD, MAD, and MAnD were 0.34 mm, 0.6 mm, and 2.32 degrees, respectively, in the SSG and 0.31 mm, 0.7 mm, and 2.37 degrees, respectively, in the DSG. The two groups were not significantly different from each other in terms of MCD (P = 0.573), MAD (P = 0.290), or MAnD (P = 0.896). CONCLUSIONS: The accuracies of the two techniques, the extended double sleeve guide and the single sleeve guide, were comparable and thus DSG may be used for removal of fiber posts in adjacent or distant teeth.

Effects of Side Flattening on Torsional and Cyclic Fracture Resistance of Nickel-Titanium File.

INTRODUCTION: The purpose of this study was to evaluate the effect of side flattening of cutting flutes on the cyclic resistance and torsional resistance of nickel-titanium files. METHODS: Both novel flattened Platinum V.EU (PL) and standard nonflattened CC Premium V.EU (CC) rotaries were tested. For cyclic fatigue tests, all the files were rotated in an artificial root canal with a curvature of 45° and a radius of 6.06 mm at 300 rpm (n = 15 in each group). The number of cycles to failure (NCF) was calculated. For torsional tests, the files were rotated at 2 rpm clockwise until fracture occurred. The maximum torque value at fracture was measured and the toughness and distortion angle were computed. Subsequently, 5 fragments were randomly selected in each experiment, the cross-section and longitudinal direction of the fragments were photographed using a scanning electron microscope. An unpaired t-test was performed at a significance level of 95%. RESULTS: There was a statistically significant difference in NCF between CC and PL (P < .05). CC showed higher NCF than PL. There was no statistically significant difference between CC and PL with regards to the parameters related to torsional resistance (distortion angle, ultimate strength, and toughness) (P > .05). CONCLUSION: Within the limitations of this study, side flattening of the file did not improve cyclic resistance or torsional resistance of the files. As side flattening may reduce a file's cyclic resistance, such files should be used with caution in clinical practice.

Effect of strontium fluoride on mechanical and remineralization properties of enamel: An in-vitro study on a modified orthodontic adhesive.

OBJECTIVES: Evaluate the ability of strontium fluoride on bond strength and enamel integrity after incorporation within orthodontic adhesive system as a delivery vehicle. METHODS: Experimental orthodontic adhesive system Transbond™ XT were modified with 1% Sr2+, 0.5% SrF2, 1% strontium, 0.5% Sr2+, 1% F-, 0.5% F-, and no additions were control. Mixing of formulation was monitored using Fourier transform infrared spectroscopy. Small-molecule drug-discovery suite was used to gain insights into Sr2+, F-, and SrF2 binding. Shear bond testing was performed after 6-months of ageing. Enamel blocks were cut, and STEM pictures were recorded. Specimens were indented to evaluate elastic modulus. Raman microscope was used to collect Raman spectra and inspected using a scanning electron microscope. Crystal structural analysis was performed using X-ray diffraction. Effect of material on cellular proliferation was determined. Confocal was performed to evaluate the effect of formulation on biofilms. RESULTS: FTIR of modified adhesives depicted peak changes within range due to various functional groups existing within samples. TEM represented structurally optimized hexagonal unit-cell of hydroxyapatite. Mean shear bond strength is recorded highest for Transbond XT with 1% SrF2. Dead bacterial percentage appeared higher in 0.5% SrF2 and 1% F- specimens. Crystal lengths showed an increase in 0.5% and 1% SrF2 specimens. Phase contrast within TEM images showed a union of 0.5% SrF2 crystal with enamel crystal with higher elastic modulus and highly mineralized crystalline hydroxyapatite. Intensity of ν1 PO43- and ν1 CO32- along with carbonate - / ν1PO43- ratio displayed good association with strontium fluoride. The formulation showed acceptable cell biocompatibility (p < 0.353). All specimens displayed characteristic diffraction maxima of different apatite angles within XRD. SIGNIFICANCE: Experimental results suggested good biocompatibility, adequate mechanical strength, and far-ranging crystallization ability. This would provide a new strategy to overcome the two major challenges of fixed orthodontics, biofilm growth, and demineralization of enamel.

The application of lasers in vital pulp therapy: clinical and radiographic outcomes.

The main purpose of vital pulp therapy (VPT) is to preserve the integrity and function of the pulp. A wide variety of materials and techniques have been proposed to improve treatment outcomes, and among them, the utilization of lasers has gained significant attention. The application of lasers in different stages of VPT has witnessed remarkable growth in recent years, surpassing previous approaches.This study aimed to review the applications of lasers in different steps of VPT and evaluate associated clinical and radiographic outcomes. An electronic search using Scopus, MEDLINE, Web of Science and Google Scholar databases from 2000 to 2023 was carried out by two independent researchers. The focus was on human studies that examined the clinical and/or radiographic effects of different laser types in VPT. A total of 4243 studies were included in this narrative review article. Based on the compiled data, it can be concluded that although current literature suggests laser may be proposed as an adjunct modality for some procedural steps in VPT, more research with standardized methodologies and criteria is needed to obtain more reliable and conclusive results.

Vital pulp therapy-Factors influencing decision-making for permanent mature teeth with irreversible pulpitis: A systematic review.

BACKGROUND: There is an increased tendency towards adopting minimally invasive interventions in dentistry, supported by advancement in materials and techniques. However, the decision-making process in choosing conservative or invasive treatments is influenced by several factors, particularly in permanent teeth with irreversible pulpitis. OBJECTIVES: The objective of the study was to systematically review the literature regarding factors that influence decision-making for vital pulp therapy (VPT) as definitive treatment option in permanent mature teeth diagnosed with irreversible pulpitis. METHODS: Two independent reviewers searched five electronic databases (PubMed, Embase, Web of Science, Scopus and Cochrane Library). Grey literature was searched through Google Scholar and contact with experts. Defined search keys were applied, and all peer-reviewed literature published with no language nor publication date limits were included. The All studies investigating the factors influencing treatment decision-making in mature permanent teeth with irreversible pulpitis were included. The quality of included studies was assessed by two independent reviewers using the Joanna Briggs Institute quality assessment tool. RESULTS: Six articles were included in the review. All included studies used questionnaires to characterize clinician preferences and attitudes in choosing treatment options for mature permanent teeth with irreversible pulpitis. The available evidence suggests that dentist-related factors have a significant influence on the chosen treatment in teeth with irreversible pulpitis, with speciality training and years of experience influencing the choice of VPT over other treatment options. COVID-19 reportedly swayed the dentists' decision to favour VPT. Only one article studied the influence of patient-related factors, such as age and presence of spontaneous pain on decision-making. Of note, a history of cardiovascular disease moved dentists towards prescribing VPT. DISCUSSION: Collectively, the included studies demonstrated an overriding influence of dentist-related factors on choosing among treatment options for painful teeth diagnosed with irreversible pulpitis. Patient-related factors were acknowledged but there are also potential factors such as socio-economic constraints that were not included in the component studies. CONCLUSION: In teeth with irreversible pulpitis clinicians educational background influence the decision towards a specific treatment option. Further data, preferably derived from clinical records, is necessary in future investigations to explore the effect of other important factors related to both dentists and patients. REGISTRATION: PROSPERO database (CRD42022339653).

The dental microscope in endodontic education: A feasibility study of a distance learning course.

This study aimed to evaluate the feasibility of preclinical training, specifically in root canal preparation, using a virtual educational system equipped with an operating microscope. Ten postgraduate general dentistry trainees and practitioners undergoing postgraduate training in endodontics participated. The telesimulation course included three steps: theory, demonstration of practical work by the teacher and lastly practical training by the participants. The digital environment including the dental microscope was presented, and the feedback was collected with a questionnaire. The majority of participants considered that the online video conference format allowed them to acquire theoretical content but also practical knowledge and skills, owing to the contribution of the operating microscope. The technical feasibility of endodontic telesimulation was demonstrated. The operating microscope has a potential role in distance education, enabling teaching to occur synchronously and collaboratively. This allows learners to interact with each other and demonstrators in real time.

Global cone-beam computed tomography adoption, usage and scan interpretation preferences of dentists and endodontists.

AIM: This study investigated the adoption of cone-beam computed tomography (CBCT) by dentists and endodontists around the world, including their preferences in endodontic CBCT usage. METHODOLOGY: An online questionnaire surveyed dental association members in Australia and New Zealand, and endodontic association members in Australia, Britain, Canada, Italy, New Zealand and the USA, about their CBCT training history, considerations in acquisition/interpretation, access to and usage of CBCT, preferred scan interpreter, and preferred endodontic scan settings. Data were analysed with Chi-squared, independent sample t-tests, Cochran's Q and McNemar's tests. RESULTS: Responses from 578 endodontic specialists or postgraduates (Group E) and 185 non-endodontic dentists (Group NE) were included. Continuing professional education (CPE) was the most common source of CBCT training (69.2%). Factors considered in CBCT acquisition/interpretation included beam hardening (75.4%), radiation exposure (61.1%) and patient movement (58.3%). Group E reported higher CBCT usage (90.8%) than Group NE (45.4%, p < .001) and greater workplace access to CBCT (81.1% vs. 25.9%, p < .001). Scans were interpreted by the respondent in most workplace scans (83.3%) and externally taken scans (60.5%); Group E were significantly more likely to interpret themselves than Group NE. Small field of view (83.6%) and high resolution (86.6%) were most preferred as settings for endodontic CBCTs; Group NE were less likely to choose these settings. There were some geographic variations within Group E. CONCLUSIONS: CBCT training was most commonly acquired via CPE. Endodontic respondents reported very high CBCT usage and access in the workplace. There are educational implications regarding CBCT limitations, appropriate applications and interpretation.

Global survey of endodontic practice and adoption of newer technologies.

AIM: To investigate current endodontic practices, adoption of technologies and continuing education attendance within specialist endodontic practice globally and to identify geographic trends. METHODOLOGY: A web-based survey of endodontic association members in Australia, Britain, Canada, Italy, New Zealand and the USA on routine treatment preferences, armamentarium and education attendance was conducted. Chi-squared, independent sample t-tests, Cochran's Q test and McNemar's test were performed. RESULTS: The survey was completed by 543 endodontists or endodontic post-graduate students. Almost all respondents used the dental operating microscope (DOM, 91.3%), engine-driven nickel-titanium instruments (NiTi, 97.6%), electronic apex locators (EAL, 93.0%), cone-beam computed tomography (CBCT, 91.2%) and calcium silicate-based materials (CSBMs, 93.7%). Dental dam was always used by 99.1%. Over half used irrigation adjuncts (81.8%), warm vertical compaction (74.6%) and heat-treated NiTi (60.2%). Geographic comparison between AP (Asia-Pacific, n = 78), AM (Americas, n = 402) and EM (Europe and Middle East, n = 63) was performed. AM and EM preferred single-visit treatment more (p < .001) and used higher sodium hypochlorite concentrations than AP. AM had more access to CBCT in the workplace (86.6%) than AP (65.4%, p < .001) and used CBCT for routine preoperative assessment (39.6%) more than EM (7.3%, p < .001). Almost all of EM used irrigation adjuncts (95.2%), more than AM (78.1%, p = .001). AP used steroid/antibiotic medicaments most (p < .001) and had the highest attendance at continuing education programmes. CONCLUSION: Several endodontic-specific armamentaria have reached almost complete adoption within global specialist endodontic practice, whilst the continued uptake of newer technologies should be followed over time. Some practising philosophies varied significantly across different geographic regions.

Morphology of pulpal mineralizations: A scoping review.

OBJECTIVE: The aim of this scoping review was to summarize and discuss the morphological features and associated factors of pulpal mineralizations (PMs) as described within the literature. DATA: The study protocol was registered on the Open Science Framework platform and is available at the following link: https://osf.io/hfqwe. This scoping review was developed according to the PRISMA-ScR guidelines. SOURCES: A literature search of four electronic databases was performed in SCOPUS, MEDLINE (PubMed), EMBASE and Word of Science, with the last search on May 29, 2023. Study selection was completed by two reviewers independently. Data was extracted regarding study characteristics, types, and features of PM and associated factors. STUDY SELECTION: Of 1016 studies initially identified ten which qualified were included in this scoping review. Systemic and local factors that result in pulpal insult can contribute to the development of PMs. Three forms of PM have been reported, pulp stones, diffuse mineralizations, and mineralized ectopic connective tissue, with discrete and diffuse mineralization being the two clinically relevant forms. The different forms of PMs exhibit dissimilar morphological features. CONCLUSION: Pulpal mineralizations exist in two clinically relevant forms: diffuse and discrete mineralizations and are likely associated with a pulpal insult. CLINICAL SIGNIFICANCE: Understanding the morphology of dental pulp mineralization is the first step to expanding the knowledge of pulp mineralization and could result in improved diagnosis of endodontic pathosis.

Treatment of pulpal and apical disease: The European Society of Endodontology (ESE) S3-level clinical practice guideline.

BACKGROUND: The ESE previously published quality guidelines for endodontic treatment in 2006; however, there have been significant changes since not only in clinical endodontics but also in consensus and guideline development processes. In the development of the inaugural S3-level clinical practice guidelines (CPG), a comprehensive systematic and methodologically robust guideline consultation process was followed in order to produce evidence-based recommendations for the management of patients presenting with pulpal and apical disease. AIM: To develop an S3-level CPG for the treatment of pulpal and apical disease, focusing on diagnosis and the implementation of the treatment approaches required to manage patients presenting with pulpitis and apical periodontitis (AP) with the ultimate goal of preventing tooth loss. METHODS: This S3-level CPG was developed by the ESE, with the assistance of independent methodological guidance provided by the Association of Scientific Medical Societies in Germany and utilizing the GRADE process. A robust, rigorous and transparent process included the analysis of relevant comparative research in 14 specifically commissioned systematic reviews, prior to evaluation of the quality and strength of evidence, the formulation of specific evidence and expert-based recommendations in a structured consensus process with leading endodontic experts and a broad base of external stakeholders. RESULTS: The S3-level CPG for the treatment of pulpal and apical disease describes in a series of clinical recommendations the effectiveness of diagnosing pulpitis and AP, prior to investigating the effectiveness of endodontic treatments in managing those diseases. Therapeutic strategies include the effectiveness of deep caries management in cases with, and without, spontaneous pain and pulp exposure, vital versus nonvital teeth, the effectiveness of root canal instrumentation, irrigation, dressing, root canal filling materials and adjunct intracanal procedures in the management of AP. Prior to treatment planning, the critical importance of history and case evaluation, aseptic techniques, appropriate training and re-evaluations during and after treatment is stressed. CONCLUSION: The first S3-level CPG in endodontics informs clinical practice, health systems, policymakers, other stakeholders and patients on the available and most effective treatments to manage patients with pulpitis and AP in order to preserve teeth over a patient's lifetime, according to the best comparative evidence currently available.

The application of lasers in vital pulp therapy: a review of histological effects.

Vital pulp therapy (VPT) is primarily intended to preserve the vitality of pulp tissues, which have been exposed for any reason. Various materials and techniques have been proposed to improve treatment outcomes, including the use of lasers. This study aimed to review the histological results of different dental lasers including low-level lasers, carbon dioxide (CO2), erbium-doped yttrium aluminum garnet laser (Er:YAG), neodymium-doped yttrium aluminum garnet (Nd:YAG), erbium, chromium:yttrium-scandium-gallium-garnet (Er,Cr:YSGG) lasers, and diode lasers for VPT. This focused review included a comprehensive electronic search of Scopus, MEDLINE, Web of Science, and Google Scholar databases from 2000 to 2022 by two independent investigators. Different combinations of keywords were used, and reference mining of related papers was done. The review included studies related to histologic evaluation of laser-assisted vital pulp therapy that stated the laser parameters that were used. Articles with radiographic or clinical assessments or articles lacking necessary data were excluded. Non-English articles were excluded unless their abstract was in English and encompassed the necessary data. Most studies indicated the efficacy of lasers for reduction of inflammation, acceleration of healing, and increasing the thickness of dentinal bridge. According to the evidence, lasers used in combination with pulp capping agents are beneficial to enhance the success rate of VPT.

Applying artificial intelligence to detect and analyse oral and maxillofacial bone loss-A scoping review.

Radiographic evaluation of bone changes is one of the main tools in the diagnosis of many oral and maxillofacial diseases. However, this approach to assessment has limitations in accuracy, inconsistency and comparatively low diagnostic efficiency. Recently, artificial intelligence (AI)-based algorithms like deep learning networks have been introduced as a solution to overcome these challenges. Based on recent studies, AI can improve the detection accuracy of an expert clinician for periapical pathology, periodontal diseases and their prognostication, as well as peri-implant bone loss. Also, AI has been successfully used to detect and diagnose oral and maxillofacial lesions with a high predictive value. This study aims to review the current evidence on artificial intelligence applications in the detection and analysis of bone loss in the oral and maxillofacial regions.