RESUMEN
As a result of screening a panel of marine organisms to identify lead molecules for the stimulation of endochondral bone formation, the calcareous sponge Pericharax heteroraphis was identified to exhibit significant activity during endochondral differentiation. On further molecular networking analysis, dereplication and chemical fractionation yielded the known clathridine A-related metabolites 3-6 and the homodimeric complex (clathridine A)2 Zn2+ (9), together with the new unstable heterodimeric complex (clathridine A-clathridimine)Zn2+ (10). With the presence of the zinc complexes annotated through the LC-MS analysis of the crude extract changing due to the instability of some metabolites and complexes constituting the mixture, we combined the isolation of the predicted molecules with their synthesis in order to confirm their structure and to understand their reactivity. Interestingly, we also found a large quantity of the contaminant benzotriazoles BTZ (7) and its semi-dimer (BTZ)2CH2 (8), which are known to form complexes with transition metals and are used for preventing corrosion in water. All isolated 2-aminoimidazole derivatives and complexes were synthesized not only for structural confirmation and chemical understanding but to further study their bioactivity during endochondral differentiation, particularly the positively screened imidazolone derivatives. Compounds leucettamine B, clathridine A and clathridimine were found to increase type X collagen transcription and stimulate endochondral ossification in the ATDC5 micromass model.
Asunto(s)
Diferenciación Celular , Osteogénesis , Poríferos , Animales , Poríferos/química , Osteogénesis/efectos de los fármacos , Diferenciación Celular/efectos de los fármacos , Organismos Acuáticos , Zinc/químicaRESUMEN
Many organisms incorporate inorganic solids into their tissues to improve functional and mechanical properties. The resulting mineralized tissues are called biominerals. Several studies have shown that nacreous biominerals induce osteoblastic extracellular mineralization. Among them, Pinctada margaritifera is well known for the ability of its organic matrix to stimulate bone cells. In this context, we aimed to study the effects of shell extracts from three other Pinctada species (Pinctada radiata, Pinctada maxima, and Pinctada fucata) on osteoblastic extracellular matrix mineralization, by using an in vitro model of mouse osteoblastic precursor cells (MC3T3-E1). For a better understanding of the Pinctada-bone mineralization relationship, we evaluated the effects of 4 other nacreous mollusks that are phylogenetically distant and distinct from the Pinctada genus. In addition, we tested 12 non-nacreous mollusks and one extra-group. Biomineral shell powders were prepared, and their organic matrix was partially extracted using ethanol. Firstly, the effect of these powders and extracts was assessed on the viability of MC3T3-E1. Our results indicated that neither the powder nor the ethanol-soluble matrix (ESM) affected cell viability at low concentrations. Then, we evaluated osteoblastic mineralization using Alizarin Red staining and we found a prominent MC3T3-E1 mineralization mainly induced by nacreous biominerals, especially those belonging to the Pinctada genus. However, few non-nacreous biominerals were also able to stimulate the extracellular mineralization. Overall, our findings validate the remarkable ability of CaCO3 biomineral extracts to promote bone mineralization. Nevertheless, further in vitro and in vivo studies are needed to uncover the mechanisms of action of biominerals in bone.
Asunto(s)
Exoesqueleto , Calcificación Fisiológica , Carbonato de Calcio , Osteoblastos , Pinctada , Animales , Ratones , Osteoblastos/metabolismo , Osteoblastos/efectos de los fármacos , Pinctada/metabolismo , Carbonato de Calcio/metabolismo , Carbonato de Calcio/química , Carbonato de Calcio/farmacología , Calcificación Fisiológica/efectos de los fármacos , Exoesqueleto/química , Supervivencia Celular/efectos de los fármacos , Línea Celular , Matriz Extracelular/metabolismo , Nácar/metabolismo , BiomineralizaciónRESUMEN
Aging is associated with detrimental bone loss leading to fragility fractures in both men and women. Notably, a majority of bone loss with aging is cortical, as well as a large number of fractures are non-vertebral and at the non-hip sites. Nacre is a product of mollusks composed of calcium carbonate embedded in organic components. As our previous study demonstrated the protective effect of nacre supplementation on trabecular bone loss in ovariectomized rats, we sought to evaluate the effect of dietary nacre on bone loss related to aging in female mice which do not suffer true menopause as observed in women. The current study compared the effect of a 90-day long nacre-supplemented diet to that of Standard or CaCO3 diets on both bone mass and strength in 16-month-old C57BL/6 female mice. Multiple approaches were performed to assess the microarchitecture and mechanical properties of long bones, analyze trabecular histomorphometry, and measure bone cell-related gene expressions, and bone turnover markers. In the cortex, dietary nacre improved cortical bone strength in line with lower expression levels of genes reflecting osteoclasts activity compared to Standard or CaCO3 diets (p < 0.05). In the trabeculae, nacre-fed mice were characterized by a bone remodeling process more active than the other groups as shown by greater histomorphometric parameters and osteoblast-related gene expressions (p < 0.05). But these differences were not exhibited at the level of the trabecular microarchitecture at this age. Collectively, these data suggest that dietary nacre should be a potential candidate for reducing aging-associated cortical bone loss in the elderly.
Asunto(s)
Enfermedades Óseas Metabólicas , Nácar , Humanos , Masculino , Anciano , Femenino , Ratones , Ratas , Animales , Ratones Endogámicos C57BL , Huesos , Densidad Ósea , Hueso Cortical , Suplementos DietéticosRESUMEN
OBJECTIVES: MTX is the recommended first-line treatment for RA associated with folic acid (FA) to reduce side effects related to MTX. Here, we proposed to test a co-administration of MTX with FA in the rat adjuvant-induced arthritis (AIA) on efficacy. MATERIAL AND METHODS: AIA was induced in female Lewis rats and treated with MTX in three groups. The first group of rats received only MTX (n = 13), whereas the second received MTX and FA on the same day (n = 14). The third group received FA one day after MTX (n = 14). Arthritic index (AI), ankle circumference (AC), ankle microcomputed tomography, and blood tests assessed arthritis severity and MTX tolerance. RESULTS: AI and AC were similar in MTX groups at various time points. Bone erosion and bone loss parameters were similar in all groups. MTX-PG1 was found at similar levels in various MTX groups and correlated negatively with arthritis severity. Finally, haematology and metabolic parameters were found at a similar level in MTX groups. CONCLUSION: Co-administration of MTX with FA on the same day did not reduce efficacy compared with FA application one day after MTX. Thus, co-administration of MTX and FA could be more convenient and improve compliance in patients.
Asunto(s)
Artritis Experimental , Metotrexato , Femenino , Ratas , Animales , Metotrexato/uso terapéutico , Ácido Fólico/uso terapéutico , Microtomografía por Rayos X , Ratas Endogámicas Lew , Artritis Experimental/metabolismoRESUMEN
Nacre has emerged as a beneficial natural product for bone cells and tissues, but its effect was only studied by gavage in the ovariectomized mouse model. We sought to assess the antiosteoporotic effect of nacre through a nutritional supplementation in the ovariectomized rat model. Sixteen-week-old female Wistar rats were either Sham-operated or bilateral ovariectomized (OVX) and then fed with standard diet (Sham and OVX groups) or standard diet supplemented with either 0.25% CaCO3 or nacre (OVX CaCO3 and OVX Nacre group, respectively) for 28 days (n = 10/group). The bone microarchitecture was assessed at appendicular and axial bones by micro-computed tomography (µCT). Histomorphometric analysis was performed to determine cellular and dynamic bone parameters. Bone metabolism was also evaluated by biochemical markers and gene expression levels. Nacre-based diet prevented the OVX-induced bone loss better than that of the CaCO3 supplement, given the significant changes in trabecular bone volume fraction (BV/TV) both at the femoral distal metaphysis (difference, 35%; p = 0.004) and at the second lumbar spine (difference, 11%; p = 0.01). Trabecular osteoclast surfaces (Oc.S/BS) were also 1.5-fold lower at the tibial proximal metaphysis in OVX Nacre group compared with OVX CaCO3 group (p = 0.02). By principal component analysis (PCA), OVX Nacre group formed a cluster away from OVX group and with a trend closest to Sham group. These data were consistent with biological measurements demonstrating a positive profile related to nacre supplementation, which blunted an increase in serum CTX level and enhanced serum P1NP secretion 14 days post-OVX compared with CaCO3 supplementation. Bmp2 mRNA expression in OVX Nacre group was +1.76-fold (p = 0.004) and +1.30-fold (p = 0.20) compared with OVX and OVX CaCO3 groups, respectively. We conclude that supplementation with nacre could effectively limit bone loss induced by estrogen deficiency just after OVX in rats by modulating the negative imbalance of bone turnover. © 2022 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.
RESUMEN
Introduction: The adjuvant-induced arthritis (AIA) model is widely used in research to investigate arthritis pathogenesis. Hind paw inflammation is the main outcome in this model with high loss of mobility function partly related to pain. However, analgesics such as non-steroidal anti-inflammatory drugs or opioid drugs interfere with the inflammation process related to arthritis, thus reducing their beneficial use in this model. Therefore, we investigated the effect of nefopam on arthritis development in order to improve pain management in the AIA model. Methods: Female Lewis rats were randomly divided into two groups, and each group received an injection of Mycobacterium butyricum on defining day (D) 0. At D6, rats (n = 10) received nefopam (intraperitoneally or orally) or NaCl 0.9% IP or 1% sucrose in water (n = 5 for each). Rats were monitored with the arthritic index (AI) and ankle circumference. Pain was assessed by scoring based on behavioral indicators. Histology, RT-qPCR, and microcomputed tomography were performed. Results: The clinical parameter AI and ankle circumference were not different in both groups at various time points. However, pain score was significantly lower in the nefopam group at the early stage of the disease. At a later stage of the disease, inflammation was mildly lower whereas bone erosion and bone loss parameters increased in the nefopam group. Conclusion: Nefopam provided a slight reduction in the level of pain at the arthritis onset without reducing arthritis severity and bone loss in the rat AIA model. However, it should be administrated orally for a shorter period to avoid inflammation reduction in the long run.
RESUMEN
Ultrashort pulse lasers have significant advantages over conventional continuous wave and long pulse lasers for the texturing of metallic surfaces, especially for nanoscale surface structure patterning. Furthermore, ultrafast laser beam polarization allows for the precise control of the spatial alignment of nanotextures imprinted on titanium-based implant surfaces. In this article, we report the biological effect of beam polarization on human mesenchymal stem cell differentiation. We created, on polished titanium-6aluminum-4vanadium (Ti-6Al-4V) plates, a laser-induced periodic surface structure (LIPSS) using linear or azimuthal polarization of infrared beams to generate linear or radial LIPSS, respectively. The main difference between the two surfaces was the microstructural anisotropy of the linear LIPSS and the isotropy of the radial LIPSS. At 7 d post seeding, cells on the radial LIPSS surface showed the highest extracellular fibronectin production. At 14 days, qRT-PCR showed on the same surface an increase in osteogenesis-related genes, such as alkaline phosphatase and osterix. At 21 d, mineralization clusters indicative of final osteoinduction were more abundant on the radial LIPSS. Taken together, we identified that creating more isotropic than linear surfaces enhances cell differentiation, resulting in an improved osseointegration. Thus, the fine tuning of ultrashort pulse lasers may be a promising new route for the functionalization of medical implants.
RESUMEN
Objective: The role of YAP/TAZ, two transcriptional co-activators involved in several cancers, was investigated in rheumatoid arthritis (RA). Methods: Fibroblast like synoviocytes (FLS) from patients with RA or osteoarthritis were cultured in 2D or into 3D synovial organoids. Arthritis rat model (n=28) and colitis mouse model (n=21) were used. YAP/TAZ transcriptional activity was inhibited by verteporfin (VP). Multiple techniques were used to assess gene and/or protein expression and/or localization, cell phenotype (invasion, proliferation, apoptosis), bone erosion, and synovial stiffness. Results: YAP/TAZ were transcriptionally active in arthritis (19-fold increase for CTGF expression, a YAP target gene, in RA vs. OA organoids; p<0.05). Stiff support of culture or pro-inflammatory cytokines further enhanced YAP/TAZ transcriptional activity in RA FLS. Inhibiting YAP/TAZ transcriptional activity with VP restored a common phenotype in RA FLS with a decrease in apoptosis resistance, proliferation, invasion, and inflammatory response. Consequently, VP blunted hyperplasic lining layer formation in RA synovial organoids. In vivo, VP treatment strongly reduced arthritis severity (mean arthritic index at 3.1 in arthritic group vs. 2.0 in VP treated group; p<0.01) by restoring synovial homeostasis and decreasing systemic inflammation. YAP/TAZ transcriptional activity also enhanced synovial membrane stiffening in vivo, thus creating a vicious loop with the maintenance of YAP/TAZ activation over time in FLS. YAP/TAZ inhibition was also effective in another inflammatory model of mouse colitis. Conclusion: Our work reveals that YAP/TAZ were critical factors during arthritis. Thus, their transcriptional inhibition could be relevant to treat inflammatory related diseases.
Asunto(s)
Artritis Reumatoide/patología , Sinoviocitos/patología , Proteínas Coactivadoras Transcripcionales con Motivo de Unión a PDZ/metabolismo , Proteínas Señalizadoras YAP/metabolismo , Animales , Artritis Reumatoide/metabolismo , Células Cultivadas , Colitis/metabolismo , Colitis/patología , Humanos , Inflamación , Ratones , Osteoartritis/metabolismo , Osteoartritis/patología , Fenotipo , Ratas , Sinoviocitos/metabolismoRESUMEN
Femtosecond laser texturing is a promising surface functionalization technology to improve the integration and durability of dental and orthopedic implants. Four different surface topographies were obtained on titanium-6aluminum-4vanadium plates by varying laser processing parameters and strategies: surfaces presenting nanostructures such as laser-induced periodic surface structures (LIPSS) and 'spikes', associated or not with more complex multiscale geometries combining micro-pits, nanostructures and stretches of polished areas. After sterilization by heat treatment, LIPSS and spikes were characterized to be highly hydrophobic, whereas the original polished surfaces remained hydrophilic. Human mesenchymal stem cells (hMSCs) grown on simple nanostructured surfaces were found to spread less with an increased motility (velocity, acceleration, tortuosity), while on the complex surfaces, hMSCs decreased their migration when approaching the micro-pits and preferentially positioned their nucleus inside them. Moreover, focal adhesions of hMSCs were notably located on polished zones rather than on neighboring nanostructured areas where the protein adsorption was lower. All these observations indicated that hMSCs were spatially controlled and mechanically strained by the laser-induced topographies. The nanoscale structures influence surface wettability and protein adsorption and thus influence focal adhesions formation and finally induce shape-based mechanical constraints on cells, known to promote osteogenic differentiation.
RESUMEN
Additive manufacturing (AM) is becoming increasingly important in the orthopedic and dental sectors thanks to two major advantages: the possibility of custom manufacturing and the integration of complex structures. However, at smaller scales, surface conditions of AM products are not mastered. Numerous non-fused powder particles give rise to roughness values (Sa) greater than 10 µm, thus limiting biomedical applications since the surface roughness of, e.g., metal implants plays a major role in the quality and rate of osseointegration. In this study, an innovative hybrid machine combining AM and a femtosecond laser (FS) was used to obtain Ti6Al4V parts with biofunctional surfaces. During the manufacturing process, the FS laser beam "neatly" ablates the surface, leaving in its path nanostructures created by the laser/matter interaction. This step decreases the Sa from 11 to 4 µm and increases the surface wettability. The behavior of human mesenchymal stem cells was evaluated on these new AM+FS surfaces and compared with that on AM surfaces and also on polished surfaces. The number of cells attached 24 h after plating is equivalent on all surfaces, but cell spreading is higher on AM+FS surfaces compared with their AM counterparts. In the longer term (days 7 and 14), fibronectin and collagen synthesis increase on AM+FS surfaces as opposed to AM alone. Alkaline phosphatase activity, osteocalcin production, and mineralization, markers of osteogenic differentiation, are significantly lower on raw AM surfaces, whereas on the AM+FS specimens they display a level equivalent to that on the polished surface. Overall, these results indicate that using an FS laser beam during the fabrication of AM parts optimizes surface morphology to favor osteoblastic differentiation. This new hybrid machine could make it possible to produce AM implants with functional surfaces directly at the end of AM, thereby limiting their post-treatments.
RESUMEN
Surface improvement of implants is essential for achieving a fast osseo-integration. Technically, the creation of a precise pattern on a titanium alloy surface is challenging. Here, the femtosecond laser was chosen as an innovative technology for texturing with accuracy a nano-micro topography. By adjusting the laser parameters, three biomimetic textures were fabricated on the titanium surface: micropits with nano-ripples in the pits, micropits with nano-ripples around the pits, and a texture with only nano-ripples. Mesenchymal stem cells (MSCs, C3H10T1/2) grown on these surfaces displayed altered morphometric parameters, and modified their focal adhesions in term of number, size, and distribution depending on surface type. These results indicate that the MSCs perceived subtle differences in topography. Dynamic analyses of early cellular events showed a higher speed of spreading on all the textured surfaces as opposed to the polished titanium. Concerning commitment, all the laser-treated surfaces strongly inhibited the expression of adipogenic-related genes (PPARÏ2, C/EBPα) and up-regulated the expression of osteoblastic-related genes (RUNX2, osteocalcin). Interestingly, the combination of micropits to nano-ripples enhanced their osteogenic potential as seen by a twofold increase in osteocalcin mRNA. Alkaline phosphatase activity was increased on all the textured surfaces, and lipid production was down-regulated. The functionalization of metallic surfaces by this high-resolution process will help us understand the MSCs' interactions with substrates for the development of textured implants with predictable tissue integrative properties.
Asunto(s)
Adipogénesis/fisiología , Adhesión Celular/fisiología , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/fisiología , Osteogénesis/fisiología , Titanio/química , Animales , Materiales Biocompatibles/química , Materiales Biocompatibles/efectos de la radiación , Línea Celular , Movimiento Celular/fisiología , Rayos Láser , Ensayo de Materiales , Ratones , Propiedades de Superficie , Titanio/efectos de la radiaciónRESUMEN
The effects of low-magnitude, high-frequency (LMHF) mechanical stimulation on osteoblastic cells are poorly understood. We have developed a system that generates very small (15-40 µÎµ), high-frequency (400 Hz, sine) deformations on osteoblast cultures (MC3T3-E1). We investigated the effects of these LMHF stimulations mainly on extracellular matrix (ECM) synthesis. The functional properties of this ECM after decellularization were evaluated on C3H10T1/2 mesenchymal stem cells (MSCs). LMHF stimulations were applied 20 min once daily for 1, 3, or 7 days in MC3T3-E1 culture (1, 3, or 7 dLMHF). Cell number and viability were not affected after 3 or 7 dLMHF. Osteoblast response to LMHF was assessed by an increase in nitric oxide secretion, alteration of the cytoskeleton, and focal contacts. mRNA expression for fibronectin, osteopontin, bone sialoprotein, and type I collagen in LMHF cultures were 1.8-, 1.6-, 1.5-, and 1.7-fold higher than controls, respectively (P < 0.05). In terms of protein, osteopontin levels were increased after 3 dLMHF and ECM organization was altered as shown by fibronectin topology after 7 dLMHF. After decellularization, 7 dLMHF-ECM or control ECM was reseeded with MSCs. Seven dLMHF-ECM improved early events such as cell attachment (2 h) and focal contact adhesion (6 h) and, later (16 h), modified MSC morphological parameters. After 5 days in multipotential medium, gene-expression changes indicated that 7 dLMHF-ECM promoted the expression of osteoblast markers at the expense of adipogenic marker. LMHF stimulations of osteoblasts are therefore efficient and sufficient to generate osteogenic matrix.
Asunto(s)
Diferenciación Celular/fisiología , Proteínas de la Matriz Extracelular/metabolismo , Células Madre Mesenquimatosas/metabolismo , Osteoblastos/metabolismo , Estrés Mecánico , Adhesión Celular , Recuento de Células , Supervivencia Celular , Células Cultivadas , Citoesqueleto , Proteínas de la Matriz Extracelular/genética , Expresión Génica , Células Madre Mesenquimatosas/citología , Óxido Nítrico/metabolismo , Osteoblastos/citología , ARN Mensajero/metabolismo , Reacción en Cadena de la Polimerasa de Transcriptasa InversaRESUMEN
Since VEGF-A is involved in mechanically induced bone gain and because vegf exists under 6 isoforms exerting various biological effects, we studied vegf isoform expression and VEGF protein production in osteoblastic cells (rat Ros17/2.8 and human osteoblasts) submitted to 4 mechanical regimens. Mechanical regimens (1% stretch deformation) were designed with a fixed number of cycles (450) delivered at various frequencies (0.05 to 5 Hz). We found a negative correlation (R(2)=0.76, p<0.0001) between production of soluble VEGF and mechanical stretch frequency and a positive correlation (R(2)=0.99, p<0.0001) between production of matrix-bound VEGF and mechanical stretch frequency. mRNA expressions of soluble VEGF isoforms (121, 165) were specifically expressed under low frequency while matrix-bound VEGF isoforms (206, 189, 165, 145) were specifically expressed under high frequency in human osteoblasts. As f-actin stress fiber formation was significantly increased selectively in high frequency conditions, we disrupted actin fibers in Ros17/2.8 and found that immobilisation of VEGF was abolished. Conversely, Jasplakinolide treatment which increases stress fiber formation was able to mimic high frequency stretch-induced immobilisation of VEGF. Thus, we speculate that the stretch-induced increase in cell tension is responsible for matrix-bound vegf isoform production. Mechanically induced selection of soluble or matrix-bound VEGF production may modify osteoblast and endothelial cell crosstalk crucial during osteogenesis and fracture healing.
Asunto(s)
Actinas/metabolismo , Empalme Alternativo , Osteoblastos/fisiología , Isoformas de Proteínas/metabolismo , Fibras de Estrés/metabolismo , Factor A de Crecimiento Endotelial Vascular/metabolismo , Animales , Línea Celular , Niño , Humanos , Osteoblastos/citología , Isoformas de Proteínas/genética , Ratas , Estrés Mecánico , Factor A de Crecimiento Endotelial Vascular/genéticaRESUMEN
Because a lack of mechanical information favors the development of adipocytes at the expense of osteoblasts, we hypothesized that the peroxisome proliferator-activated receptor gamma (PPARgamma)-dependent balance between osteoblasts and adipocytes is affected by mechanical stimuli. We tested the robustness of this hypothesis in in vivo rodent osteogenic exercise, in vitro cyclic loading of cancellous haversian bone samples, and cyclic stretching of primary stromal and C3H10T1/2 cells. We found that running rats exhibit a decreased marrow fat volume associated with an increased bone formation, presumably through recruitment of osteoprogenitors. In the tissue culture model and primary stromal cells, cyclic loading induced higher Runx2 and lower PPARgamma2 protein levels. Given the proadipocytic and antiosteoblastic activities of PPARgamma, we studied the effects of cyclic stretching in C3H10T1/2 cells, treated either with the PPARgamma activator, Rosiglitazone, or with GW9662, a potent antagonist of PPARgamma. We found, through both cytochemistry and analysis of lineage marker expression, that under Roziglitazone cyclic stretch partially overcomes the induction of adipogenesis and is still able to favor osteoblast differentiation. Conversely, cyclic stretch has additive effects with GW9662 in inducing osteoblastogenesis. In conclusion, we provide evidence that mechanical stimuli are potential PPARgamma modulators counteracting adipocyte differentiation and inhibition of osteoblastogenesis.
Asunto(s)
Adipogénesis/fisiología , Células de la Médula Ósea/citología , Células de la Médula Ósea/fisiología , Osteoblastos/citología , Osteoblastos/fisiología , PPAR gamma/metabolismo , Adipocitos/citología , Adipocitos/fisiología , Animales , Bovinos , Diferenciación Celular/fisiología , Línea Celular Transformada , Subunidad alfa 1 del Factor de Unión al Sitio Principal/genética , Subunidad alfa 1 del Factor de Unión al Sitio Principal/metabolismo , Regulación hacia Abajo/fisiología , Masculino , Células Madre Mesenquimatosas/citología , Células Madre Mesenquimatosas/fisiología , PPAR gamma/genética , Condicionamiento Físico Animal , Ratas , Ratas Wistar , Estrés Mecánico , Células del Estroma/citología , Células del Estroma/fisiología , Tibia/citología , Tibia/fisiologíaRESUMEN
In a previous study we demonstrated that MG-63 cells cultured on Ti-6Al-4V discs covered by alumina ceramic and submitted to intermittent mechanical strain (IMS) presented morphological alteration associated with enhanced differentiation. Here we examine how the mechanical response of osteoblasts can be modulated by the nature of the substrate. MG-63 cells were cultured on four materials: polystyrene and Ti-6Al-4V (average roughness = 0.48 microm) as smooth substrates; Ti-6Al-4V (average roughness = 5.76 microm) and Ti-6Al-4V covered with alumina (average roughness = 5.21 microm) as rough substrates. Mechanical strains were applied for 15 min, three times a day for 1-5 days with a 600 microstrains magnitude and a 0.25 Hz frequency. IMS stimulated alkaline phosphatase activity by 25-35% on all substrates and had no effect on cell growth on either substrate. Fibronectin (FN) was chosen as representative of cell-matrix interaction. FN production was increased by 60% after 1 day of stretching only on alumina-coated discs. FN organization examined on smooth substrates was affected by 5 days of IMS, showing a thickening of the fibres. The same modifications induced by IMS were previously observed on alumina-covered discs. Vinculin expression was not affected by IMS whatever the substrate. Cell-cell interactions were determined by N-cadherin immunoblotting. N-cadherin expression was increased by IMS specifically on rough substrates. Our results suggest that the nature of the surface did not influence the up-regulation of alkaline phosphatase activity induced by IMS, but modulates specifically cell-substrate as well as cell-cell interactions in response to IMS.
Asunto(s)
Mecanotransducción Celular/fisiología , Osteoblastos/citología , Osteoblastos/fisiología , Titanio/química , Aleaciones , Materiales Biocompatibles/química , Diferenciación Celular/fisiología , Línea Celular , Proliferación Celular , Supervivencia Celular/fisiología , Humanos , Ensayo de Materiales , Oseointegración/fisiología , Osteogénesis/fisiología , Prótesis e Implantes , Estrés Mecánico , Propiedades de SuperficieRESUMEN
The effects of mechanical strains on cellular activities were assessed in an in vitro model using human osteoblastic MG-63 cells grown on titanium alloy discs coated with porous alumina and exposed to chronic intermittent loading. Strain was applied with a Dynacell device for three 15-min sequences per day for several days with a magnitude of 600 microepsilon strain and a frequency of 0.25 Hz. We have previously demonstrated that this regimen increased alkaline phosphatase activity in confluent cultures on ceramic coated titanium (alumina and hydroxyapatite) (Biomaterials 24 (2003) 3139). In this study, we analysed the production of bone matrix proteins. Osteocalcin secretion quantified by ELISA between day 5 and 11 was not affected by mechanical strain. Strain had even no quantifiable effect on collagen production from day 1 to 5 as measured by carboxy terminal collagen type I propeptide release. On the other hand, stress stimulation resulted in increased expression of fibronectin (FN) measured by Western blot after 1 day stretching. This upregulation of FN production was followed by reorganisation of the FN network after 5 days stretching observed by immunostaining. The receptors for collagen and FN, alpha2beta1, alpha5beta1 and beta1 integrins were not quantitatively affected by the strains as measured by flow cytometry. A modification of cell morphology was seen after 5 days of loading that appeared to increase cell spreading, implying consequences on intercellular contacts. For this reason, N, C11 and E-adherins were examined. We noted a selective effect characterised by increased expression of N-cadherin using both RT-PCR and Western blot analyses. We concluded that reinforcement of cell-cell adhesion and remodelling of the FN network are important adaptive responses to physiological strains for human osteoblasts grown on alumina-coated biomaterials.