Tuning the hydraulic resistance by swelling-induced buckling of membranes in high-aspect-ratio microfluidic devices.

Controlling fluid flow in microfluidic devices and adapting it to varying conditions by selectively regulating hydrodynamic properties is of critical importance, as the field of microfluidics faces increasingly complex challenges in its wide range of applications. One way to manipulate flows in microfluidic devices is to introduce elastic elements that can be actively or passively deformed. In this work, we developed a membrane-based microfluidic device that allows us to study the deformation of swollen thin membranes as a function of the volume fractions in binary mixtures - here isopropanol and water. Furthermore, the membrane deformation can be used to control pressure-driven flows within the device. The device consists of two microfluidic channels separated by a thin membrane that deforms by a buckling-based mechanism, when the isopropanol volume fraction of the solvent flowing through it exceeds a certain volume fraction. The buckling membrane causes a sinusoidal height variation in both adjacent channels, resulting in a large increase in hydraulic resistance. We show that buckling-based deflections of elastic membranes can be used to amplify small changes in the degree of swelling to produce large changes in the microchannel geometry of the device, sufficient to manipulate the flow rate of pressure-driven flows in the microdevice.

Bacteria-on-a-bead: probing the hydrodynamic interplay of dynamic cell appendages during cell separation.

Surface attachment of bacteria is the first step of biofilm formation and is often mediated and coordinated by the extracellular appendages, flagellum and pili. The model organism Caulobacter crescentus undergoes an asymmetric division cycle, giving rise to a motile "swarmer cell" and a sessile "stalked cell", which is attached to the surface. In the highly polarized predivisional cell, pili and flagellum, which are assembled at the pole opposite the stalk, are both activated before and during the process of cell separation. We explored the interplay of flagellum and active pili by growing predivisional cells on colloidal beads, creating a bacteria-on-a-bead system. Using this set-up, we were able to simultaneously visualize the bacterial motility and analyze the dynamics of the flagellum and pili during cell separation. The observed activities of flagellum and pili at the new cell pole of the predivisional cell result in a cooperating interplay of the appendages during approaching and attaching to a surface. Even in presence of a functioning flagellum, pili are capable of surface attachment and keeping the cell in position. Moreover, while flagellar rotation decreases the average attachment time of a single pilus, it increases the overall attachment rate of pili in a synergetic manner.

Semi-Crystalline Poly(thioether) Prepared by Visible-Light-Induced Organocatalyzed Thiol-ene Polymerization in Emulsion.

A photocatalytic thiol-ene aqueous emulsion polymerization under visible-light is described to prepare linear semicrystalline latexes using 2,2'-dimercaptodiethyl sulfide as dithiol and various dienes. The procedure involves low irradiance (3 mW cm-2 ), LED irradiation source, eosin-Y disodium as organocatalyst, low catalyst loading (<0.05% mol), and short reaction time scales (<1 h). The resulting latexes have molecular weights of about 10 kg mol-1 , average diameters of 100 nm, and a linear structure consisting only of thioether repeating units. Electron-transfer reaction from a thiol to the triplet excited state of the photocatalyst is suggested as the primary step of the mechanism (type I), whereas oxidation by singlet oxygen generated by energy transfer has a negligible effect (type II). Only polymers prepared with aliphatic dienes such as diallyl adipate or di(ethylene glycol) divinyl ether exhibit a high crystallization tendency as revealed by differential scanning calorimetry, polarized optical microscopy, and X-ray diffraction. Ordering and crystallization are driven by molecular packing of poly(thioether) chains combining structural regularity, compactness, and flexibility.

Surface-modified elastomeric nanofluidic devices for single nanoparticle trapping.

Our work focuses on the development of simpler and effective production of nanofluidic devices for high-throughput charged single nanoparticle trapping in an aqueous environment. Single nanoparticle confinement using electrostatic trapping has been an effective approach to study the fundamental properties of charged molecules under a controlled aqueous environment. Conventionally, geometry-induced electrostatic trapping devices are fabricated using SiOx-based substrates and comprise nanochannels imbedded with nanoindentations such as nanopockets, nanoslits and nanogrids. These geometry-induced electrostatic trapping devices can only trap negatively charged particles, and therefore, to trap positively charged particles, modification of the device surface is required. However, the surface modification process of a nanofluidic device is cumbersome and time consuming. Therefore, here, we present a novel approach for the development of surface-modified geometry-induced electrostatic trapping devices that reduces the surface modification time from nearly 5 days to just a few hours. We utilized polydimethylsiloxane for the development of a surface-modified geometry-induced electrostatic trapping device. To demonstrate the device efficiency and success of the surface modification procedure, a comparison study between a PDMS-based geometry-induced electrostatic trapping device and the surface-modified polydimethylsiloxane-based device was performed. The device surface was modified with two layers of polyelectrolytes (1: poly(ethyleneimine) and 2: poly(styrenesulfonate)), which led to an overall negatively charged surface. Our experiments revealed the presence of a homogeneous surface charge density inside the fluidic devices and equivalent trapping strengths for the surface-modified and native polydimethylsiloxane-based geometry-induced electrostatic trapping devices. This work paves the way towards broader use of geometry-induced electrostatic trapping devices in the fields of biosensing, disease diagnosis, molecular analysis, fluid quality control and pathogen detection.

Measurements of periodically perturbed dewetting force fields and their consequences on the symmetry of the resulting patterns.

We studied the origin of breaking the symmetry for moving circular contact lines of dewetting polymer films suspended on a periodic array of pillars. There, dewetting force fields driving polymer flow were perturbed by elastic micro-pillars arranged in a regular square pattern. Elastic restoring forces of deformed pillars locally balance driving capillary forces and broke the circular symmetry of expanding dewetting holes. The observed envelope of the dewetting holes reflected the symmetry of the underlying pattern, even at sizes much larger than the characteristic period of the pillar array, demonstrating that periodic perturbations in a driving force field can establish a well-defined pattern of lower symmetry. For the presented system, we succeeded in squaring the circle.

Self-Seeding Procedure for Obtaining Stacked Block Copolymer Lamellar Crystals in Solution.

We examined the formation of self-seeded platelet-like crystals from polystyrene-block-polyethylene oxide (PS-b-PEO) diblock copolymers in toluene as a function of polymer concentration (c), crystallization temperature (TC), and self-seeding temperature (TSS). We showed that the number (N) of platelet-like crystals and their mean lateral size (L) can be controlled through a self-seeding procedure. As (homogeneous) nucleation was circumvented by the self-seeding procedure, N did not depend on TC. N increased linearly with c and decayed exponentially with TSS but was not affected significantly by the time the sample was kept at TSS. The solubility limit of PS-b-PEO in toluene (c*), which was derived from the linear extrapolation of Nc→ 0 and from the total deposited mass of the platelets per area (MCc→0), depended on TC. We have also demonstrated that at low N, stacks consisting of a (large) number (η) of uniquely oriented lamellae can be achieved. At a given TC, L was controlled by N and η as well as by ∆c=c-c∗. Thus, besides being able to predict size and number of platelet-like crystals, the self-seeding procedure also allowed control of the number of stacked lamellae in these crystals.

Tad Pili Play a Dynamic Role in Caulobacter crescentus Surface Colonization.

Bacterial surface attachment is mediated by filamentous appendages called pili. Here, we describe the role of Tad pili during surface colonization of Caulobacter crescentus Using an optical trap and microfluidic controlled flow conditions to mimic natural environments, we demonstrated that Tad pili undergo repeated dynamic cycles of extension and retraction. Within seconds after establishing surface contact, pilus retraction reorients cells into an upright position, promoting walking-like movements against the medium flow. Pilus-mediated positioning of the flagellate pole close to the surface facilitates motor-mediated mechanical sensing and promotes anchoring of the holdfast, an adhesive substance that affords long-term attachment. We present evidence that the second messenger c-di-GMP regulates pilus dynamics during surface encounter in distinct ways, promoting increased activity at intermediate levels and retraction of pili at peak concentrations. We propose a model in which flagellum and Tad pili functionally interact and together impose a ratchet-like mechanism that progressively drives C. crescentus cells toward permanent surface attachment.IMPORTANCE Bacteria are able to colonize surfaces in environmental, industrial, and medical settings, where they form resilient communities called biofilms. In order to control bacterial surface colonization, microbiologists need to gain a detailed understanding of the processes that bacteria use to live at the liquid-surface interface and that allow them to adhere to and move on surfaces and eventually grow and persist on solid media. To facilitate these processes, bacteria are equipped with adhesive structures such as flagella and pili and with matrix components such as exopolysaccharides. How these cellular organelles are coordinated to optimize surface processes is currently subject to intense investigations. Here we used the model organism Caulobacter crescentus to demonstrate that polar pili are highly dynamic structures that are functionally interconnected with the flagellar motor to mediate surface sensing, thereby enforcing rapid and permanent surface attachment. These studies provide an entry point for an in-depth molecular analysis of bacterial surface colonization.

Spatially resolved small-angle X-ray scattering for characterizing mechanoresponsive liposomes using microfluidics.

Atherosclerosis gives rise to blood vessel occlusion associated with blood flow alteration and substantial increase of average wall shear stress. This modification was proved acting as a purely physical trigger for targeted vasodilator release from a particular type of liposomes composed of 1,3-diaminophospholipids (Pad-PC-Pad). The flow-induced structural changes of these faceted liposomes, however, are completely unknown. Therefore, spatially resolved small-angle X-ray scattering was combined with microfluidics to uniquely study the purely physical mechanisms, which give rise to the highly efficient drug release from mechanoresponsive liposomes of nanometer size. The microfluidic device, designed to mimic a stenotic blood vessel, consisted of a 1-mm-wide channel with a constriction, 125 â€‹µm in diameter. Here, the changes of the average bilayer thickness and the mean size of the mechanoresponsive liposomes have been locally detected under flow conditions. Overall shape and bilayer thickness do change already near the constriction inlet, but the alteration is dominant near the outlet. At a flow rate of 0.2 â€‹µL/s, the liposome's bilayer thickness increased by 30 % compared to the situation well before the constriction and under static condition. The detected bilayer thickness increase of the faceted liposomes is in line with the mechanically induced loss of interdigitation between the phospholipid amide chains. These results imply that rather the gradient force than the wall shear stress provokes structural changes of Pad-PC-Pad liposomes and the related drug release at stenoses. The approach, i.e. the combination of microfluidics and spatially resolved small-angle X-ray scattering, paves the way to design highly efficient and specific systems for the targeted drug delivery at constrictions with predefined morphology.

Monitoring single-cell gene regulation under dynamically controllable conditions with integrated microfluidics and software.

Much is still not understood about how gene regulatory interactions control cell fate decisions in single cells, in part due to the difficulty of directly observing gene regulatory processes in vivo. We introduce here a novel integrated setup consisting of a microfluidic chip and accompanying analysis software that enable long-term quantitative tracking of growth and gene expression in single cells. The dual-input Mother Machine (DIMM) chip enables controlled and continuous variation of external conditions, allowing direct observation of gene regulatory responses to changing conditions in single cells. The Mother Machine Analyzer (MoMA) software achieves unprecedented accuracy in segmenting and tracking cells, and streamlines high-throughput curation with a novel leveraged editing procedure. We demonstrate the power of the method by uncovering several novel features of an iconic gene regulatory program: the induction of Escherichia coli's lac operon in response to a switch from glucose to lactose.

Second messenger-mediated tactile response by a bacterial rotary motor.

When bacteria encounter surfaces, they respond with surface colonization and virulence induction. The mechanisms of bacterial mechanosensation and downstream signaling remain poorly understood. Here, we describe a tactile sensing cascade in Caulobacter crescentus in which the flagellar motor acts as sensor. Surface-induced motor interference stimulated the production of the second messenger cyclic diguanylate by the motor-associated diguanylate cyclase DgcB. This led to the allosteric activation of the glycosyltransferase HfsJ to promote rapid synthesis of a polysaccharide adhesin and surface anchoring. Although the membrane-embedded motor unit was essential for surface sensing, mutants that lack external flagellar structures were hypersensitive to mechanical stimuli. Thus, the bacterial flagellar motor acts as a tetherless sensor reminiscent of mechanosensitive channels.

Live cell X-ray imaging of autophagic vacuoles formation and chromatin dynamics in fission yeast.

Seeing physiological processes at the nanoscale in living organisms without labeling is an ultimate goal in life sciences. Using X-ray ptychography, we explored in situ the dynamics of unstained, living fission yeast Schizosaccharomyces pombe cells in natural, aqueous environment at the nanoscale. In contrast to previous X-ray imaging studies on biological matter, in this work the eukaryotic cells were alive even after several ptychographic X-ray scans, which allowed us to visualize the chromatin motion as well as the autophagic cell death induced by the ionizing radiation. The accumulated radiation of the sequential scans allowed for the determination of a characteristic dose of autophagic vacuole formation and the lethal dose for fission yeast. The presented results demonstrate a practical method that opens another way of looking at living biological specimens and processes in a time-resolved label-free setting.

Immunological response to nitroglycerin-loaded shear-responsive liposomes in vitro and in vivo.

Liposomes formulated from the 1,3-diamidophospholipid Pad-PC-Pad are shear-responsive and thus promising nano-containers to specifically release a vasodilator at stenotic arteries. The recommended preclinical safety tests for therapeutic liposomes of nanometer size include the in vitro assessment of complement activation and the evaluation of the associated risk of complement activation-related pseudo-allergy (CARPA) in vivo. For this reason, we measured complement activation by Pad-PC-Pad formulations in human and porcine sera, along with the nanopharmaceutical-mediated cardiopulmonary responses in pigs. The evaluated formulations comprised of Pad-PC-Pad liposomes, with and without polyethylene glycol on the surface of the liposomes, and nitroglycerin as a model vasodilator. The nitroglycerin incorporation efficiency ranged from 25% to 50%. In human sera, liposome formulations with 20mg/mL phospholipid gave rise to complement activation, mainly via the alternative pathway, as reflected by the rises in SC5b-9 and Bb protein complex concentrations. Formulations having a factor of ten lower phospholipid content did not result in measurable complement activation. The weak complement activation induced by Pad-PC-Pad liposomal formulations was confirmed by the results obtained by performing an in vivo study in a porcine model, where hemodynamic parameters were monitored continuously. Our study suggests that, compared to FDA-approved liposomal drugs, Pad-PC-Pad exhibits less or similar risks of CARPA.

Soft electrostatic trapping in nanofluidics.

Trapping and manipulation of nano-objects in solution are of great interest and have emerged in a plethora of fields spanning from soft condensed matter to biophysics and medical diagnostics. We report on establishing a nanofluidic system for reliable and contact-free trapping as well as manipulation of charged nano-objects using elastic polydimethylsiloxane (PDMS)-based materials. This trapping principle is based on electrostatic repulsion between charged nanofluidic walls and confined charged objects, called geometry-induced electrostatic (GIE) trapping. With gold nanoparticles as probes, we study the performance of the devices by measuring the stiffness and potential depths of the implemented traps, and compare the results with numerical simulations. When trapping 100 nm particles, we observe potential depths of up to Q≅24 k B T that provide stable trapping for many days. Taking advantage of the soft material properties of PDMS, we actively tune the trapping strength and potential depth by elastically reducing the device channel height, which boosts the potential depth up to Q~200 k B T, providing practically permanent contact-free trapping. Due to a high-throughput and low-cost fabrication process, ease of use, and excellent trapping performance, our method provides a reliable platform for research and applications in study and manipulation of single nano-objects in fluids.

A self-filling microfluidic device for noninvasive and time-resolved single red blood cell experiments.

Existing approaches to red blood cell (RBC) experiments on the single-cell level usually rely on chemical or physical manipulations that often cause difficulties with preserving the RBC's integrity in a controlled microenvironment. Here, we introduce a straightforward, self-filling microfluidic device that autonomously separates and isolates single RBCs directly from unprocessed human blood samples and confines them in diffusion-controlled microchambers by solely exploiting their unique intrinsic properties. We were able to study the photo-induced oxygenation cycle of single functional RBCs by Raman microscopy without the limitations typically observed in optical tweezers based methods. Using bright-field microscopy, our noninvasive approach further enabled the time-resolved analysis of RBC flickering during the reversible shape evolution from the discocyte to the echinocyte morphology. Due to its specialized geometry, our device is particularly suited for studying the temporal behavior of single RBCs under precise control of their environment that will provide important insights into the RBC's biomedical and biophysical properties.

Brownian and advective dynamics in microflow studied by coherent X-ray scattering experiments.

Combining microfluidics with coherent X-ray illumination offers the possibility to not only measure the structure but also the dynamics of flowing samples in a single-scattering experiment. Here, the power of this combination is demonstrated by studying the advective and Brownian dynamics of colloidal suspensions in microflow of different geometries. Using an experimental setup with a fast two-dimensional detector and performing X-ray correlation spectroscopy by calculating two-dimensional maps of the intensity auto-correlation functions, it was possible to evaluate the sample structure and furthermore to characterize the detailed flow behavior, including flow geometry, main flow directions, advective flow velocities and diffusive dynamics. By scanning a microfocused X-ray beam over a microfluidic device, the anisotropic auto-correlation functions of driven colloidal suspensions in straight, curved and constricted microchannels were mapped with the spatial resolution of the X-ray beam. This method has not only a huge potential for studying flow patterns in complex fluids but also to generally characterize anisotropic dynamics in materials.

Scanning-SAXS of microfluidic flows: nanostructural mapping of soft matter.

The determination of in situ structural information of soft matter under flow is challenging, as it depends on many factors, such as temperature, concentration, confinement, channel geometry, and type of imposed flow. Here, we combine microfluidics and scanning small-angle X-ray scattering (scanning-SAXS) to create a two-dimensional spatially resolved map, which represents quantitatively the variation of molecular properties under flow. As application examples, mappings of confined amyloid fibrils and wormlike micelles under flow into various channel geometries are compared. A simple process to fabricate X-rays resistant chips, based on polyimide and UV-curing resin, is discussed. During experiments, these chips remained in high-energy synchrotron radiation for more than 24 hours, causing constant low background scattering. Thus, sufficient statistics were obtained from sample scattering at exposure times as low as 0.1 s, even with the small scattering volumes in microfluidic channels. Scanning-SAXS of microfluidic flows has many potential applications from biology to fundamental soft matter physics. In general, any fluid which has enough contrast for X-ray scattering can be measured to obtain the dependence of molecular shape, conformation, alignment and size on the flow field. Besides, dynamic processes of soft matter caused by flow, temperature, concentration gradient, and confinement, for example self-assembling, aggregation, mixing, diffusion, and disintegration of macromolecules, can be quantified and visualized on a single image by this mapping technique.

Motility, Force Generation, and Energy Consumption of Unicellular Parasites.

Motility is a key factor for pathogenicity of unicellular parasites, enabling them to infiltrate and evade host cells, and perform several of their life-cycle events. State-of-the-art methods of motility analysis rely on a combination of optical tweezers with high-resolution microscopy and microfluidics. With this technology, propulsion forces, energies, and power generation can be determined so as to shed light on the motion mechanisms, chemotactic behavior, and specific survival strategies of unicellular parasites. With these new tools in hand, we can elucidate the mechanisms of motility and force generation of unicellular parasites, and identify ways to manipulate and eventually inhibit them.

Trapping, entrainment and synchronization of semiflexible polymers in narrow, asymmetric confinements.

The physical properties of polymeric actin facilitate many mechanical processes within the cell, including cellular deformation and locomotion, whereby the polymers can be confined to a range of different geometries. As actin polymers often form entangled solutions in the cell, we have investigated the effect of confinement on the evolution of entangled semiflexible polymer solutions. Using a microfluidic platform, we examined the physical dynamics of actin polymers confined within narrow (2-4 µm) rectangular channels. Focusing on the entanglement process of two actin polymers, we found that their prolonged entrainment leads to synchronized horizontal undulations and decreased translational diffusion. In the absence of cross-linking molecules or proteins, the long-range entrainment interactions are predominantly controlled by the geometric boundaries. We directly measure the deflection length Λ for an individual polymer, either solitarily confined within a channel or confined in the presence of a second filament, enabling the determination of the change in free energy associated with polymer entanglement. Our results indicate that geometrical confinement can serve as a solitary variable influencing the physical dynamics of entangled semiflexible polymers.

Real-time dynamics of emerging actin networks in cell-mimicking compartments.

Understanding the cytoskeletal functionality and its relation to other cellular components and properties is a prominent question in biophysics. The dynamics of actin cytoskeleton and its polymorphic nature are indispensable for the proper functioning of living cells. Actin bundles are involved in cell motility, environmental exploration, intracellular transport and mechanical stability. Though the viscoelastic properties of actin-based structures have been extensively probed, the underlying microstructure dynamics, especially their disassembly, is not fully understood. In this article, we explore the rich dynamics and emergent properties exhibited by actin bundles within flow-free confinements using a microfluidic set-up and epifluorescence microscopy. After forming entangled actin filaments within cell-sized quasi two-dimensional confinements, we induce their bundling using three different fundamental mechanisms: counterion condensation, depletion interactions and specific protein-protein interactions. Intriguingly, long actin filaments form emerging networks of actin bundles via percolation leading to remarkable properties such as stress generation and spindle-like intermediate structures. Simultaneous sharing of filaments in different links of the network is an important parameter, as short filaments do not form networks but segregated clusters of bundles instead. We encounter a hierarchical process of bundling and its subsequent disassembly. Additionally, our study suggests that such percolated networks are likely to exist within living cells in a dynamic fashion. These observations render a perspective about differential cytoskeletal responses towards numerous stimuli.

Microfluidics-based single cell analysis reveals drug-dependent motility changes in trypanosomes.

We present a single cell viability assay, based on chemical gradient microfluidics in combination with optical micromanipulation. Here, we used this combination to in situ monitor the effects of drugs and chemicals on the motility of the flagellated unicellular parasite Trypanosoma brucei; specifically, the local cell velocity and the mean squared displacement (MSD) of the cell trajectories. With our method, we are able to record in situ cell fixation by glutaraldehyde, and to quantify the critical concentration of 2-deoxy-d-glucose required to completely paralyze trypanosomes. In addition, we detected and quantified the impact on cell propulsion and energy generation at much lower 2-deoxy-d-glucose concentrations. Our microfluidics-based approach advances fast cell-based drug testing in a way that allows us to distinguish cytocidal from cytostatic drug effects, screen effective dosages, and investigate the impact on cell motility of drugs and chemicals. Using suramin, we could reveal the impact of the widely used drug on trypanosomes: suramin lowers trypanosome motility and induces cell-lysis after endocytosis.