RESUMEN
Sodium-ion batteries have recently aroused the interest of industries as possible replacements for lithium-ion batteries in some areas. With their high theoretical capacities and competitive prices, P2-type layered oxides (NaxTMO2) are among the obvious choices in terms of cathode materials. On the other hand, many of these materials are unstable in air due to their reactivity toward water and carbon dioxide. Here, Na0.67Mn0.9Ni0.1O2 (NMNO), one of such materials, has been synthesized by a classic sol-gel method and then exposed to air for several weeks as a way to allow a simple and reproducible transition toward a Na-rich birnessite phase. The transition between the anhydrous P2 to the hydrated birnessite structure has been followed via periodic XRD analyses, as well as neutron diffraction ones. Extensive electrochemical characterizations of both pristine NMNO and the air-exposed one vs sodium in organic medium showed comparable performances, with capacities fading from 140 to 60 mAh g-1 in around 100 cycles. Structural evolution of the air-exposed NMNO has been investigated both with ex situ synchrotron XRD and Raman. Finally, DFT analyses showed similar charge compensation mechanisms between P2 and birnessite phases, providing a reason for the similarities between the electrochemical properties of both materials.
RESUMEN
Highly concentrated aqueous binary solutions of acetate salts are promising systems for different electrochemical applications, for example, energy storage devices. The very high solubility of CH3COOK allows us to obtain water-in-salt electrolyte concentrations, thus reducing ion activity and extending the cathodic stability of an aqueous electrolyte. At the same time, the presence of Li+ or Na+ makes these solutions compatible with intercalation materials for the development of rechargeable alkaline-ion batteries. Although there is a growing interest in these systems, a fundamental understanding of their physicochemical properties is still lacking. Here, we report and discuss the physicochemical and electrochemical properties of a series of solutions based on 20 mol kg-1 CH3COOK with different concentrations of CH3COONa. The most concentrated solution, 20 mol kg-1 CH3COOK + 7 mol kg-1 CH3COONa, gives the best compromise between transport properties and electrochemical stability, displaying a conductivity of 21.2 mS cm-1 at 25 °C and a stability window of up to 3 V in "ideal" conditions, i.e., using a small surface area and highly electrocatalytic electrode in a flooded cell. Careful Raman spectroscopy analyses help to address the interaction network, the phase evolution with temperature, and the crystallization kinetics.
RESUMEN
Water-in-salt solutions, i.e. solutions in which the amount of salt by volume or weight is larger than that of the solvent, are attracting increasing attention in electrochemistry due to their distinct features that often include decomposition potentials much higher than those of lower concentration solutions. Despite the high solubility of potassium acetate (KAC) in water at room temperature (up to 25 moles of salt per kg of solvent), the low cost, and the large availability, the use of highly concentrated KAC solutions is still limited to a few examples in energy storage applications and a systematic study of their physical-chemical properties is lacking. To fill this gap, we have investigated the thermal, rheological, electrical, electrochemical, and spectroscopic features of KAC/water solutions in the compositional range between 1 and 25 mol kg-1. We show the presence of a transition between the "salt-in-solvent" and "solvent-in-salt" regimes in the range of 10-15 mol kg-1. Among the explored compositions, the highest concentrations (20 and 25 mol kg-1) exhibit good room temperature conductivity values (55.6 and 31 mS cm-1, respectively) and a large electrochemical potential window (above 2.5 V).
RESUMEN
The effect of the type of dopant (titanium and manganese) and of the reduced graphene oxide content (rGO, 30 or 50 wt %) of the α-Fe2O3@rGO nanocomposites on their microstructural properties and electrochemical performance was investigated. Nanostructured composites were synthesized by a simple one-step solvothermal method and evaluated as anode materials for sodium ion batteries. The doping does not influence the crystalline phase and morphology of the iron oxide nanoparticles, but remarkably increases stability and Coulombic efficiency with respect to the anode based on the composite α-Fe2O3@rGO. For fixed rGO content, Ti-doping improves the rate capability at lower rates, whereas Mn-doping enhances the electrode stability at higher rates, retaining a specific capacity of 56 mAhg-1 at a rate of 2C. Nanocomposites with higher rGO content exhibit better electrochemical performance.