Increasing Collagen to Bioink Drives Mesenchymal Stromal Cells-Chondrogenesis from Hyaline to Calcified Layers.

The bioextrusion of mesenchymal stromal cells (MSCs) directly seeded in a bioink enables the production of three-dimensional (3D) constructs, promoting their chondrogenic differentiation. Our study aimed to evaluate the effect of different type I collagen concentrations in the bioink on MSCs' chondrogenic differentiation. We printed 3D constructs using an alginate, gelatin, and fibrinogen-based bioink cellularized with MSCs, with four different quantities of type I collagen addition (0.0, 0.5, 1.0, and 5.0 mg per bioink syringe). We assessed the influence of the bioprinting process, the bioink composition, and the growth factor (TGF-ꞵ1) on the MSCs' survival rate. We confirmed the biocompatibility of the process and the bioinks' cytocompatibility. We evaluated the chondrogenic effects of TGF-ꞵ1 and collagen addition on the MSCs' chondrogenic properties through macroscopic observation, shrinking ratio, reverse transcription polymerase chain reaction, glycosaminoglycan synthesis, histology, and type II collagen immunohistochemistry. The bioink containing 0.5 mg of collagen produces the richest hyaline-like extracellular matrix, presenting itself as a promising tool to recreate the superficial layer of hyaline cartilage. The bioink containing 5.0 mg of collagen enhances the synthesis of a calcified matrix, making it a good candidate for mimicking the calcified cartilaginous layer. Type I collagen thus allows the dose-dependent design of specific hyaline cartilage layers.

Rat synovial tissue and blood rapamycin pharmacokinetics after intra-articular injection of free solution or nanoparticles vs free rapamycin intravenous shot.

Intra-articular (IA) injection of a chondroprotective candidate may delay the osteoarthritis (OA) course, but its rapid absorption into systemic circulation may limit efficacy and produce untoward effects. We compared the pharmacokinetics (PK) of IA rapamycin injected as sustained release in nanoparticles (NPs) versus a free rapamycin suspension in the rat knee compared to an intravenous (IV) free rapamycin shot taken as a reference. Rats received either a single IV injection of free rapamycin (10 µM) or an IA of free or NPs-loaded rapamycin. After sequential exsanguination (15, 30, 60, 180, 360 min, D1, and D7), knee synovial tissue (ST) and cartilage histology were performed. Blood and ST concentrations (LC-MS/MS), PK parameters (area under the curve: AUC; mean residence time: MRT; elimination half-life: T1/2), and IA biocompatibility were assessed. AUCIV was significantly higher for IV than for both IA injections (AUCIA free and AUCIA NPs), with 4248 vs 28 and 74 µg.min.L-1. For ST parameters, we observed a significant difference between AUCIA free and AUCIA NPs with 3735 and 10513 µg.min.L-1 correspondingly. Articular T1/2 and MRT were higher after NPs than after free rapamycin injection: 57.8 and 5.0 h for T1/2 and 80.6 and 5.5 h for MRT, respectively. Histological analysis revealed no chondral injuries and slight transient synovitis only 3 h after the administration of NPs. In the rat knee, rapamycin-loaded NPs delivery via a single IA injection is biocompatible and prolongs synovium joint residency, diminishes blood levels, and reduces detrimental systemic exposure.

Rapamycin-loaded Poly(lactic-co-glycolic) acid nanoparticles: Preparation, characterization, and in vitro toxicity study for potential intra-articular injection.

Osteoarthritis (OA) is the most common degenerative joint disease. Rapamycin is a potential candidate for OA treatment by increasing the autophagy process implicated in its physiopathology. To optimize Rapamycin profit and avoid systemic side effects, intra-articular (i.a.) administration appeared helpful. However, Rapamycin's highly hydrophobic nature and low bioavailability made it challenging to develop purpose-made drug delivery systems to overcome these limitations. We developed Rapamycin-loaded nanoparticles (NPs) using poly (lactic-co-glycolic acid) by emulsion/evaporation method. We evaluated these NPs' cytocompatibility towards cartilage (chondrocytes) and synovial membrane cells (synoviocytes) for a potential i.a. administration. The in vitro characterization of Rapamycin-loaded NPs had shown a suitable profile for an i.a. administration. In vitro biocompatibility of NPs was highlighted to 10 µM of Rapamycin for both synoviocytes and chondrocytes, but significant toxicity was observed with higher concentrations. Besides, synoviocytes are more sensitive to Rapamycin-loaded NPs than chondrocytes. Finally, we observed in vitro that an adapted formulated Rapamycin-loaded NPs could be safe at suitable i.a. injection concentrations. The toxic effect of Rapamycin encapsulated in these NPs on both articular cells was dose-dependent. After Rapamycin-loaded NPs i.a. administration, local retention, in situ safety, and systemic release should be evaluated with experimental in vivo models.

Relationship between spinal structural damage on radiography and bone fragility on CT in ankylosing spondylitis patients.

To evaluate whether the risk of bone fragility on computed tomography (CT) (scanographic bone attenuation coefficient of the first lumbar vertebra (SBAC-L1)) is associated with the severity of spine structural involvement (mSASSS) in patients with ankylosing spondylitis (AS). This retrospective study included AS patients, followed from 2009 to 2017, who fulfilled the New York criteria and who underwent thoraco-abdomino-pelvic CT and radiography (spine, pelvis). The structural involvement was retained for mSASSS ≥ 2. The SBAC-L1 was measured in Hounsfield units (HU). A SBAC-L1 ≤ 145 HU was used to define patients at risk of vertebral fracture (VF). A total of 73 AS patients were included (mean age: 60.3 (± 10.7) years, 8 women (11%), mean disease duration: 24.6 years (± 13.9)). Sixty patients (82.2%) had a mSASSS ≥ 2 (mean score 20.7 (± 21.2)). The mean SBAC-L1 was 141.1 HU (± 45), 138.1 HU (± 44.8) and 154.8 HU (± 44.9) in the total, mSASSS ≥ 2 and mSASSS < 2 populations, respectively. Patients with bone bridges had lower SBAC-L1 than mSASSS ≥ 2 patients without ankylosis (p = 0.02) and more often SBAC-L1 ≤ 145 HU (73% vs 41.9%, p = 0.006). A SBAC-L1 ≤ 145 HU was not associated with structural spine involvement, but patients with bone bridges had significantly decreased SBAC-L1 and an increased probability of being under the fracture threshold.

Stem Cells and Extrusion 3D Printing for Hyaline Cartilage Engineering.

Hyaline cartilage is deficient in self-healing properties. The early treatment of focal cartilage lesions is a public health challenge to prevent long-term degradation and the occurrence of osteoarthritis. Cartilage tissue engineering represents a promising alternative to the current insufficient surgical solutions. 3D printing is a thriving technology and offers new possibilities for personalized regenerative medicine. Extrusion-based processes permit the deposition of cell-seeded bioinks, in a layer-by-layer manner, allowing mimicry of the native zonal organization of hyaline cartilage. Mesenchymal stem cells (MSCs) are a promising cell source for cartilage tissue engineering. Originally isolated from bone marrow, they can now be derived from many different cell sources (e.g., synovium, dental pulp, Wharton's jelly). Their proliferation and differentiation potential are well characterized, and they possess good chondrogenic potential, making them appropriate candidates for cartilage reconstruction. This review summarizes the different sources, origins, and densities of MSCs used in extrusion-based bioprinting (EBB) processes, as alternatives to chondrocytes. The different bioink constituents and their advantages for producing substitutes mimicking healthy hyaline cartilage is also discussed.

HydraPsiSeq: a method for systematic and quantitative mapping of pseudouridines in RNA.

Developing methods for accurate detection of RNA modifications remains a major challenge in epitranscriptomics. Next-generation sequencing-based mapping approaches have recently emerged but, often, they are not quantitative and lack specificity. Pseudouridine (ψ), produced by uridine isomerization, is one of the most abundant RNA modification. ψ mapping classically involves derivatization with soluble carbodiimide (CMCT), which is prone to variation making this approach only semi-quantitative. Here, we developed 'HydraPsiSeq', a novel quantitative ψ mapping technique relying on specific protection from hydrazine/aniline cleavage. HydraPsiSeq is quantitative because the obtained signal directly reflects pseudouridine level. Furthermore, normalization to natural unmodified RNA and/or to synthetic in vitro transcripts allows absolute measurements of modification levels. HydraPsiSeq requires minute amounts of RNA (as low as 10-50 ng), making it compatible with high-throughput profiling of diverse biological and clinical samples. Exploring the potential of HydraPsiSeq, we profiled human rRNAs, revealing strong variations in pseudouridylation levels at ∼20-25 positions out of total 104 sites. We also observed the dynamics of rRNA pseudouridylation throughout chondrogenic differentiation of human bone marrow stem cells. In conclusion, HydraPsiSeq is a robust approach for the systematic mapping and accurate quantification of pseudouridines in RNAs with applications in disease, aging, development, differentiation and/or stress response.

Respective stemness and chondrogenic potential of mesenchymal stem cells isolated from human bone marrow, synovial membrane, and synovial fluid.

BACKGROUND: MSCs isolated from bone marrow (BM-MSCs) have well-established chondrogenic potential, but MSCs derived from the synovial membrane (SM-MSCs) and synovial fluid (SF-MSCs) are thought to possess superior chondrogenicity. This study aimed to compare the in vitro immunophenotype and trilineage and chondrogenic potential of BM-MSCs to SM-MSCs and SF-MSCs. METHODS: MSCs were isolated from bone marrow (BM-MSCs), synovial membrane (SM-MSCs), and synovial fluid (SF-MSCs) extracted from the hips (BM) and knees (SM and SF) of advanced OA patients undergoing arthroplasty. Flow cytometric analysis was used at P2 to evaluate cell stemness. The trilinear differentiation test was performed at P2. At P3, MSC-seeded collagen sponges were cultured in chondrogenic medium for 28 days. Chondrogenic gene expression was quantified by qRT-PCR. Finally, the implants were stained to assess the deposition of proteoglycans and type II collagen. RESULTS: Despite variability, the immunophenotyping of BM-MSCs, SM-MSCs, and SF-MSCs was quite similar. All cell types were positive for the expression of stem cell markers and negative for exclusion markers. Additionally, chondrogenic differentiation and hypertrophy were more pronounced in BM-MSCs (ACAN, SOX9, COL2B, and COL10A) than in SF-MSCs, with SM-MSCs having intermediate characteristics. Concerning matrix synthesis, the three cell types were equipotent in terms of GAG content, while BM-MSC ECM synthesis of type II collagen was superior. CONCLUSIONS: Chondrogenic MSCs are easily collected from SM and SF in advanced human OA, but in vitro chondrogenesis that is superior to age-matched BM-MSCs should not be expected. However, due to intra-articular priming, SF-MSCs did not overexpress hypertrophic gene.

Consequences of spinal ankylosis on bone trabecular fragility assessed on CT scans in patients with ankylosing spondylitis. A retrospective study.

INTRODUCTION: Ankylosing spondylitis (AS) patients seems to be at risk of osteoporosis but bone screening is not often performed. The objective was to evaluate the effect of vertebral ankylosis on scanographic bone attenuation coefficient (SBAC) on lumbar vertebrae in AS patients. METHODS: This study included AS patients fulfilling New York criteria who underwent both thoraco-abdomino-pelvic computed tomography and X-rays during routine follow-up. The modified stoke ankylosing spondylitis spinal score (mSASSS) was scored on X-rays, and the presence of at least one syndesmophyte (mSASSS≥2) defined mSASSS+ patients. Ankylosis of a lumbar vertebra was defined by the presence of bone bridges to its two adjacent vertebrae. The SBAC was measured from L1 to L5, and the fracture threshold was set at SBAC≤145 HU. RESULTS: A total of 73 AS patients were included (mean age: 60.3 [±10.7] years, 65 men [89%]). Sixty patients (82.2%) were mSASSS+; 13 patients (17.8%) presented ankylosis of at least one lumbar vertebra. The SBAC of each lumbar vertebra was not significantly different between mSASSS- and mSASSS+ patients. The SBAC was lower for patients with at least one bone bridge than for patients without (P<0.05). Patients with lumbar vertebral ankylosis had a higher risk of presenting an SBAC≤145 HU (OR: 4.95 (95% CI: 1.1-17.4)). CONCLUSION: The presence of a bone bridge and complete ankylosis of lumbar vertebra were associated with a higher risk of SBAC under the fracture threshold, suggesting structural deterioration of trabecular bone in ankylosed vertebrae in AS patients.

Oxytocin Controls Chondrogenesis and Correlates with Osteoarthritis.

This study investigated the relationship of oxytocin (OT) to chondrogenesis and osteoarthritis (OA). Human bone marrow and multipotent adipose-derived stem cells were cultured in vitro in the absence or presence of OT and assayed for mRNA transcript expression along with histological and immunohistochemical analyses. To study the effects of OT in OA in vivo, a rat model and a human cohort of 63 men and 19 women with hand OA and healthy controls, respectively, were used. The baseline circulating OT, interleukin-6, leptin, and oestradiol levels were measured, and hand X-ray examinations were performed for each subject. OT induced increased aggrecan, collagen (Col) X, and cartilage oligomeric matrix protein mRNA transcript levels in vitro, and the immunolabelling experiments revealed a normalization of Sox9 and Col II protein expression levels. No histological differences in lesion severity were observed between rat OA groups. In the clinical study, a multivariate analysis adjusted for age, body mass index, and leptin levels revealed a significant association between OA and lower levels of OT (odds ratio = 0.77; p = 0.012). Serum OT levels are reduced in patients with hand OA, and OT showed a stimulatory effect on chondrogenesis. Thus, OT may contribute to the pathophysiology of OA.

Combining Innovative Bioink and Low Cell Density for the Production of 3D-Bioprinted Cartilage Substitutes: A Pilot Study.

3D bioprinting offers interesting opportunities for 3D tissue printing by providing living cells with appropriate scaffolds with a dedicated structure. Biological advances in bioinks are currently promising for cell encapsulation, particularly that of mesenchymal stem cells (MSCs). We present herein the development of cartilage implants by 3D bioprinting that deliver MSCs encapsulated in an original bioink at low concentration. 3D-bioprinted constructs (10 × 10 × 4 mm) were printed using alginate/gelatin/fibrinogen bioink mixed with human bone marrow MSCs. The influence of the bioprinting process and chondrogenic differentiation on MSC metabolism, gene profiles, and extracellular matrix (ECM) production at two different MSC concentrations (1 million or 2 million cells/mL) was assessed on day 28 (D28) by using MTT tests, real-time RT-PCR, and histology and immunohistochemistry, respectively. Then, the effect of the environment (growth factors such as TGF-ß1/3 and/or BMP2 and oxygen tension) on chondrogenicity was evaluated at a 1 M cell/mL concentration on D28 and D56 by measuring mitochondrial activity, chondrogenic gene expression, and the quality of cartilaginous matrix synthesis. We confirmed the safety of bioextrusion and gelation at concentrations of 1 million and 2 million MSC/mL in terms of cellular metabolism. The chondrogenic effect of TGF-ß1 was verified within the substitute on D28 by measuring chondrogenic gene expression and ECM synthesis (glycosaminoglycans and type II collagen) on D28. The 1 M concentration represented the best compromise. We then evaluated the influence of various environmental factors on the substitutes on D28 (differentiation) and D56 (synthesis). Chondrogenic gene expression was maximal on D28 under the influence of TGF-ß1 or TGF-ß3 either alone or in combination with BMP-2. Hypoxia suppressed the expression of hypertrophic and osteogenic genes. ECM synthesis was maximal on D56 for both glycosaminoglycans and type II collagen, particularly in the presence of a combination of TGF-ß1 and BMP-2. Continuous hypoxia did not influence matrix synthesis but significantly reduced the appearance of microcalcifications within the extracellular matrix. The described strategy is very promising for 3D bioprinting by the bioextrusion of an original bioink containing a low concentration of MSCs followed by the culture of the substitutes in hypoxic conditions under the combined influence of TGF-ß1 and BMP-2.

In vitro and in vivo potentialities for cartilage repair from human advanced knee osteoarthritis synovial fluid-derived mesenchymal stem cells.

BACKGROUND: Mesenchymal stem cells (MSCs) are found in synovial fluid (SF) and can easily be harvested during arthrocentesis or arthroscopy. However, SF-MSC characterization and chondrogenicity in collagen sponges have been poorly documented as well as their hypothetical in vivo chondroprotective properties with intra-articular injections during experimental osteoarthritis (OA). METHODS: SF-MSCs were isolated from human SF aspirates in patients suffering from advanced OA undergoing total knee joint replacements. SF-MSCs at passage 2 (P2) were characterized by flow cytometry for epitope profiling. SF-MSCs at P2 were subsequently cultured in vitro to assess their multilineage potentials. To assess their chondrogenicity, SF-MSCs at P4 were seeded in collagen sponges for 4 weeks under various oxygen tensions and growth factors combinations to estimate their gene profile and matrix production. Also, SF-MSCs were injected into the joints in a nude rat anterior cruciate ligament transection (ACLT) to macroscopically and histologically assess their possible chondroprotective properties,. RESULTS: We characterized the stemness (CD73+, CD90+, CD105+, CD34-, CD45-) and demonstrated the multilineage potency of SF-MSCs in vitro. Furthermore, the chondrogenic induction (TGF-ß1 ± BMP-2) of these SF-MSCs in collagen sponges demonstrated a good capacity of chondrogenic gene induction and extracellular matrix synthesis. Surprisingly, hypoxia did not enhance matrix synthesis, although it boosted chondrogenic gene expression (ACAN, SOX9, COL2A1). Besides, intra-articular injections of xenogenic SF-MSCs did exert neither chondroprotection nor inflammation in ACLT-induced OA in the rat knee. CONCLUSIONS: Advanced OA SF-MSCs seem better candidates for cell-based constructs conceived for cartilage defects rather than intra-articular injections for diffuse OA.

Label-free relative quantification of secreted proteins as a non-invasive method for the quality control of chondrogenesis in bioengineered substitutes for cartilage repair.

Cartilage tissue engineering is making progress, but the competing available strategies still leave room for improvement and consensual overviews regarding the best combinations of scaffolds and cell sources are limited by the capacity to compare them directly. In addition, because most strategies involve autologous cell transfer, once these are optimized, the resulting implants require individual quality control prior to grafting in order to emphasize patient-to-patient differential responsiveness to engineering processes. Here, cartilage substitutes prepared from human mesenchymal stem cells undergoing chondrogenic differentiation within distinct scaffolds were used as pilot samples to investigate the pertinence of a novel method with the aim of characterizing the implants. The limits and advantages of analysing, by label-free liquid chromatography-coupled matrix-assisted laser desorption and ionization (LC-MALDI) mass spectrometry, the secreted proteome released into culture medium by engineered cartilage tissues were investigated and compared with more classically used methods for biomaterial characterization. This method did not require sacrificing the biomaterials and robustly evidenced their chondrogenic statuses. In more detail, the method highlighted differences between batches prepared from distinct donors. It was adapted to distinct scaffolds and allowed a comparison of the influence of individual engineering steps, such as growth factor combinations and oxygen tension. Finally, it evidenced subtle changes between replicate substitutes within a series, thereby distinguishing the least and most accomplished ones. We conclude that relative quantification of secreted proteins through label-free LC-MALDI will be useful, not only to orientate engineering methodologies, but also to ultimately provide non-invasive quality control of engineered tissue substitutes for the repair of cartilage and possibly other connective tissues.

New tools for non-invasive exploration of collagen network in cartilaginous tissue-engineered substitute.

In tissue engineering approaches, the quality of substitutes is a key element to determine its ability to treat cartilage defects. However, in clinical practice, the evaluation of tissue-engineered cartilage substitute quality is not possible due to the invasiveness of the standard procedure, which is to date histology. The aim of this work was to validate a new innovative system performed from two-photon excitation laser adapted to an optical macroscope to evaluate at macroscopic scale the collagen network in cartilage tissue-engineered substitutes in confrontation with gold standard histologic techniques or immunohistochemistry to visualize type II collagen. This system permitted to differentiate the quality of collagen network between ITS and TGF-ß1 treatments. Multiscale large field imaging combined to multimodality approaches (SHG-TCSPC) at macroscopical scale represent an innovative and non-invasive technique to monitor the quality of collagen network in cartilage tissue-engineered substitutes before in vivo implantation.

* Hypoxia for Mesenchymal Stem Cell Expansion and Differentiation: The Best Way for Enhancing TGFß-Induced Chondrogenesis and Preventing Calcifications in Alginate Beads.

We examined the respective influence of a sequential or a continuous hypoxia during expansion and transforming growth factor beta 1-driven chondrogenic differentiation of human bone marrow mesenchymal stem cells (MSCs). The differentiation was performed within alginate beads, a classical tool for the implantation of MSCs within the joint. The standard normoxic 2D (expansion) and 3D (differentiation) MSCs cultures served as reference. To determine the quality of chondrogenesis, we analyzed typical markers such as type II and X collagens, SOX9, COMP, versican, and aggrecan mRNAs using polymerase chain reaction and we assessed the production of type II collagen and hypoxia-inducible factor (HIF)-1α by histological stainings. We simultaneously assessed the expression of osteogenic mRNAs (Alkaline Phosphatase, RUNX2, and Osteocalcin) and the presence of micro-calcifications by Alizarin red and Raman spectroscopy. Chondrogenic differentiation is clearly improved by hypoxia in 3D. Best results were obtained when the entire process, that is, 2D expansion and 3D differentiation, was performed under continuous 5% hypoxic condition. In addition, no calcification (hydroxyapatite, proved by RAMAN) was observed after 2D hypoxic expansion even in the case of a normoxic differentiation, in contrast with controls. Finally, a better chondrogenic differentiation of human MSCs is achieved when a reduced oxygen tension is applied during both expansion and differentiation times, avoiding in vitro osteogenic commitment of cells and subsequently the calcification deposition.

New trends in articular cartilage repair.

Damage to the articular cartilage is an important, prevalent, and unsolved clinical issue for the orthopaedic surgeon. This review summarizes innovative basic research approaches that may improve the current understanding of cartilage repair processes and lead to novel therapeutic options. In this regard, new aspects of cartilage tissue engineering with a focus on the choice of the best-suited cell source are presented. The importance of non-destructive cartilage imaging is highlighted with the recent availability of adapted experimental tools such as Second Harmonic Generation (SHG) imaging. Novel insights into cartilage pathophysiology based on the involvement of the infrapatellar fat pad in osteoarthritis are also described. Also, recombinant adeno-associated viral vectors are discussed as clinically adapted, efficient tools for potential gene-based medicines in a variety of articular cartilage disorders. Taken as a whole, such advances in basic research in diverse fields of articular cartilage repair may lead to the development of improved therapies in the clinics for an improved, effective treatment of cartilage lesions in a close future.

Chondrogenic induction of mesenchymal stromal/stem cells from Wharton's jelly embedded in alginate hydrogel and without added growth factor: an alternative stem cell source for cartilage tissue engineering.

BACKGROUND: Due to their intrinsic properties, stem cells are promising tools for new developments in tissue engineering and particularly for cartilage tissue regeneration. Although mesenchymal stromal/stem cells from bone marrow (BM-MSC) have long been the most used stem cell source in cartilage tissue engineering, they have certain limits. Thanks to their properties such as low immunogenicity and particularly chondrogenic differentiation potential, mesenchymal stromal/stem cells from Wharton's jelly (WJ-MSC) promise to be an interesting source of MSC for cartilage tissue engineering. METHODS: In this study, we propose to evaluate chondrogenic potential of WJ-MSC embedded in alginate/hyaluronic acid hydrogel over 28 days. Hydrogels were constructed by the original spraying method. Our main objective was to evaluate chondrogenic differentiation of WJ-MSC on three-dimensional scaffolds, without adding growth factors, at transcript and protein levels. We compared the results to those obtained from standard BM-MSC. RESULTS: After 3 days of culture, WJ-MSC seemed to be adapted to their new three-dimensional environment without any detectable damage. From day 14 and up to 28 days, the proportion of WJ-MSC CD73(+), CD90(+), CD105(+) and CD166(+) decreased significantly compared to monolayer marker expression. Moreover, WJ-MSC and BM-MSC showed different phenotype profiles. After 28 days of scaffold culture, our results showed strong upregulation of cartilage-specific transcript expression. WJ-MSC exhibited greater type II collagen synthesis than BM-MSC at both transcript and protein levels. Furthermore, our work highlighted a relevant result showing that WJ-MSC expressed Runx2 and type X collagen at lower levels than BM-MSC. CONCLUSIONS: Once seeded in the hydrogel scaffold, WJ-MSC and BM-MSC have different profiles of chondrogenic differentiation at both the phenotypic level and matrix synthesis. After 4 weeks, WJ-MSC, embedded in a three-dimensional environment, were able to adapt to their environment and express specific cartilage-related genes and matrix proteins. Today, WJ-MSC represent a real alternative source of stem cells for cartilage tissue engineering.

Dose-response of superparamagnetic iron oxide labeling on mesenchymal stem cells chondrogenic differentiation: a multi-scale in vitro study.

AIM: The aim of this work was the development of successful cell therapy techniques for cartilage engineering. This will depend on the ability to monitor non-invasively transplanted cells, especially mesenchymal stem cells (MSCs) that are promising candidates to regenerate damaged tissues. METHODS: MSCs were labeled with superparamagnetic iron oxide particles (SPIO). We examined the effects of long-term labeling, possible toxicological consequences and the possible influence of progressive concentrations of SPIO on chondrogenic differentiation capacity. RESULTS: No influence of various SPIO concentrations was noted on human bone marrow MSC viability or proliferation. We demonstrated long-term (4 weeks) in vitro retention of SPIO by human bone marrow MSCs seeded in collagenic sponges under TGF-ß1 chondrogenic conditions, detectable by Magnetic Resonance Imaging (MRI) and histology. Chondrogenic differentiation was demonstrated by molecular and histological analysis of labeled and unlabeled cells. Chondrogenic gene expression (COL2A2, ACAN, SOX9, COL10, COMP) was significantly altered in a dose-dependent manner in labeled cells, as were GAG and type II collagen staining. As expected, SPIO induced a dramatic decrease of MRI T2 values of sponges at 7T and 3T, even at low concentrations. CONCLUSIONS: This study clearly demonstrates (1) long-term in vitro MSC traceability using SPIO and MRI and (2) a deleterious dose-dependence of SPIO on TGF-ß1 driven chondrogenesis in collagen sponges. Low concentrations (12.5-25 µg Fe/mL) seem the best compromise to optimize both chondrogenesis and MRI labeling.

Respective interest of T2 mapping and diffusion tensor imaging in assessing porcine knee cartilage with MR at 3 Teslas.

Non-invasive quantitative assessment of articular cartilage integrity is essential for early detection and evaluation of osteoarthritis (OA) and for the follow-up of stem-cell-driven cartilage engineering. In this study, we investigated the feasibility of exploiting diffusion tensor imaging (DTI) on porcine knee joints with a clinical magnetic resonance (MR) scanner to extract micro-structural information in order to complement biochemical information quantified by T2 maps. We propose an MR protocol for quantifying T2 and cartilage microstructure with diffusion MR on a clinical scanner. Preliminary results were obtained on four pig knee joints using a 3 T GE clinical MRI scanner and an 8-channel knee coil array. The measured cartilage volume, T2 values, apparent diffusion coefficient and fractional anisotropy (FA) of femoral and tibial cartilage were respectively 9.8/2.3 mm2, 67.0/56.1 ms, 1.3/1.3×10-3 mm2/s and 0.4/0.3. This new protocol has the potential to be combined in vivo with quantitative assessment of both cartilage degradation and restoration in osteoarthritis.

Increasing the bioactivity of elastomeric poly(ε-caprolactone) scaffolds for use in tissue engineering.

BACKGROUND: Biodegradable polymers used in tissue engineering applications, such as poly(ε-caprolactone) (PCL), are hydrophobic leading to a lack of favorable cell signalization and finally to a poor cell adhesion, proliferation and differentiation. To overcome this problem, scaffolds undergo generally a surface modification. OBJECTIVE: Our laboratory has demonstrated that the grafting of poly(sodium styrene sulfonate) (pNaSS) onto titanium or poly(ethylene terephthalate) surfaces, leads to a more specific protein adsorption and a better control of cell proliferation. The objective of this work is to develop, through a straightforward way, bioactive elastomeric PCL scaffolds by grafting pNaSS. METHODS: Porous elastomeric PCL scaffolds were developed using a particulate-leaching process. pNaSS was grafted into the scaffold by a "grafting from" technique. In vitro tests were carried out to assess cell adhesion and protein expression. RESULTS: pNaSS was grafted homogeneously onto PCL scaffolds without degrading the biodegradable polymer or the porous structure. The in vitro studies have shown that pNaSS grafted onto PCL improves the cell response with a better expression of collagen, fibronectin and integrin α1. CONCLUSIONS: The grafting of pNaSS onto biomaterial surfaces is a versatile method that can provide a new generation of biodegradable scaffolds which could be "biointegrable".

Osteogenic differentiation of human bone marrow mesenchymal stem cells in hydrogel containing nacre powder.

Nacre (or mother of pearl) can facilitate bone cell differentiation and can speed up their mineralization. Here we report on the capability of nacre to induce differentiation of human bone marrow mesenchymal stem cells (hBM-MSCs) and the production of extracellular matrix. hBM-MSCs were encapsulated in an alginate hydrogel containing different concentrations of powdered nacre and cultured in the same environment until Day 28. Analysis of osteogenic gene expression, histochemistry, second harmonic generation (SHG) microscopy, and Raman scattering spectroscopy were used to characterize the synthesis of the extracellular matrix. In the presence of nacre powder, a significant increase in matrix synthesis from D21 in comparison with pure alginate was observed. Histochemistry revealed the formation of a new tissue composed of collagen fibers in the presence of nacre (immunostaining and SHG), and hydroxyapatite crystals (Raman) in the alginate beads. These results suggest that nacre is efficient in hBM-MSCs differentiation, extracellular matrix production and mineralization in alginate 3D biomaterials.