Development and Evaluation of a Stable Oil-in-Water Emulsion with High Ostrich Oil Concentration for Skincare Applications.

This study investigates the development of an oil-in-water (O/W) emulsion enriched with a high concentration of ostrich oil, recognized for its abundant content of oleic acid (34.60 ± 0.01%), tailored for skincare applications. Using Span and Tween emulsifiers, we formulated an optimized emulsion with 20% w/w ostrich oil and a 15% w/w blend of Span 20 and Tween 80. This formulation, achieved via homogenization at 3800 rpm for 5 min, yielded the smallest droplet size (5.01 ± 0.43 µm) alongside an appropriate zeta potential (-32.22 mV). Our investigation into the influence of Span and Tween concentrations, types, and ratios on the stability of 20% w/w ostrich oil emulsions, maintaining a hydrophile-lipophile balance (HLB) of 5.5, consistently demonstrated the superior stability of the optimized emulsion across various formulations. Cytotoxicity assessments on human dermal fibroblasts affirmed the safety of the emulsion. Notably, the emulsion exhibited a 52.20 ± 2.01% inhibition of linoleic acid oxidation, surpassing the 44.70 ± 1.94% inhibition observed for ostrich oil alone. Moreover, it demonstrated a superior inhibitory zone against Staphylococcus aureus (12.32 ± 0.19 mm), compared to the 6.12 ± 0.15 mm observed for ostrich oil alone, highlighting its enhanced antioxidant and antibacterial properties and strengthening its potential for skincare applications. The optimized emulsion also demonstrates the release of 78.16 ± 1.22% of oleic acid across the cellulose acetate membrane after 180 min of study time. This successful release of oleic acid further enhances the overall efficacy and versatility of the optimized emulsion. Stability assessments, conducted over 6 months at different temperatures (4 °C, 25 °C, 45 °C), confirmed the emulsion's sustained physicochemical and microbial stability, supporting its promise for topical applications. Despite minor fluctuations in acid values (AV) and peroxide values (PV), the results remained within the acceptable limits. This research elucidates the crucial role of emulsification in optimizing the efficacy and stability of ostrich oil in skincare formulations, providing valuable insights for practical applications where stability is paramount.

Advances in Natural Product Extraction Techniques, Electrospun Fiber Fabrication, and the Integration of Experimental Design: A Comprehensive Review.

The present review explores the growing interest in the techniques employed for extracting natural products. It emphasizes the limitations of conventional extraction methods and introduces superior non-conventional alternatives, particularly ultrasound-assisted extraction. Characterization and quantification of bioactive constituents through chromatography coupled with spectroscopy are recommended, while the importance of method development and validation for biomarker quantification is underscored. At present, electrospun fibers provide a versatile platform for incorporating bioactive extracts and have extensive potential in diverse fields due to their unique structural and functional characteristics. Thus, the review also highlights the fabrication of electrospun fibers containing bioactive extracts. The preparation of biologically active extracts under optimal conditions, including the selection of safe solvents and cost-effective equipment, holds promising potential in the pharmaceutical, food, and cosmetic industries. Integration of experimental design into extraction procedures and formulation development is essential for the efficient production of health products. The review explores potential applications of encapsulating natural product extracts in electrospun fibers, such as wound healing, antibacterial activity, and antioxidant properties, while acknowledging the need for further exploration and optimization in this field. The findings discussed in this review are anticipated to serve as a valuable resource for the processing industry, enabling the utilization of affordable and environmentally friendly, natural, and raw materials.

Preparation of Bioactive De-Chlorophyll Rhein-Rich Senna alata Extract.

Senna alata leaves display various biological activities as a result of their rhein and phenolic composition. The objective of this study was to develop bioactive de-chlorophyll rhein-rich S. alata extracts. The rhein content was quantified using a validated high-performance liquid chromatography-diode array detection (HPLC-DAD) method. The best process parameters for maximizing rhein were established using ultrasound-assisted extraction (UAE). The optimal conditions for the parameters were determined using the Box-Behnken design (BBD); 95% v/v ethanol was used as the extraction solvent at 59.52 °C for 18.4 min with a solvent-to-solid ratio of 25.48:1 (mL/g) to obtain the predicted value of rhein at 10.44 mg/g extract. However, the color of the rhein-rich extract remained dark brown. For the removal of chlorophyll, liquid-liquid extraction with vegetable oils and adsorption with bleaching agents were employed. The bleaching agents were significantly more effective at removing chlorophyll and had less of an effect on the reduction in rhein content than vegetable oils. The presence of rhein and phenolics in the de-chlorophyll extracts might be responsible for their antioxidant, anti-inflammatory, and antibacterial activities. These findings indicate that rhein-rich extract and its de-chlorophyll extracts possess sufficient biological activities for the further development of cosmeceuticals and pharmaceuticals.

Optimization and comparison of GC-FID and HPLC-ELSD methods for determination of lauric acid, mono-, di-, and trilaurins in modified coconut oil.

Modified coconut oil (MCO) obtained from the glycerolysis of virgin coconut oil (VCO) and glycerol under various conditions should have different amounts of bioactive fatty acids (FAs) and acylglycerols (AGs). Methods were developed to analyze lauric acid (LA), monolaurin (ML), dilaurin (DL), and trilaurin (TL) in MCO samples using gas chromatography - flame ionization detector (GC-FID) and high performance liquid chromatography - evaporative light scattering detector (HPLC-ELSD). The purpose of this research is to optimize and compare GC-FID and HPLC-ELSD methods for determination of LA, ML, DL, and TL in MCO samples. All the standard curves exhibited good linearity (R2 ≥ 0.9995), except for that of LA analyzed by HPLC-ELSD (R2 = 0.9971). The limits of detection (LODs) and quantification (LOQs) were found to be in the range of 0.033-0.260 mg/ml and 0.099-0.789 mg/ml for the GC-FID method and 0.040-0.421 mg/ml and 0.122-1.277 mg/ml for the HPLC-ELSD method, respectively. The GC-FID method (LOD ≤ 0.033 mg/ml) was more sensitive than HPLC-ELSD method (LOD ≤ 0.421 mg/ml) and showed satisfactory recoveries for LA analysis while HPLC-ELSD method (LOD ≤ 0.040 mg/ml) was more sensitive than GC-FID method (LOD ≤ 0.260 mg/ml) and exhibited acceptable recoveries for TL analysis. Both methods were applied to determine the MCO samples produced under varied conditions for glycerolysis. The results revealed that the developed GC-FID method is suitable for the quantification of LA, ML, and DL while the developed HPLC-ELSD method is appropriate for the determination of ML, DL, and TL. Both developed GC-FID and HPLC-ELSD methods produced reproducible results for the determination of LA, ML, DL, and TL in MCO samples.