Pre-Endcapping of Hyperbranched Polymers toward Intrinsically Stretchable Semiconductors with Good Ductility and Carrier Mobility.

The advancement of semiconducting polymers stands as a pivotal milestone in the quest to realize wearable electronics. Nonetheless, endowing semiconductor polymers with stretchability without compromising their carrier mobility remains a formidable challenge. This study proposes a "pre-endcapping" strategy for synthesizing hyperbranched semiconducting polymers (HBSPs), aiming to achieve the balance between carrier mobility and stretchability for organic electronics. The findings unveil that the aggregates formed by the endcapped hyperbranched network structure not only ensure efficient charge transport but also demonstrate superior tensile resistance. In comparison to linear conjugated polymers, HBSPs exhibit substantially larger crack onset strains and notably diminished tensile moduli. It is evident that the HBSPs surpass their linear counterparts in terms of both their semiconducting and mechanical properties. Among HBSPs, HBSP-72h-2.5 stands out as the preeminent candidate within the field of inherently stretchable semiconducting polymers, maintaining 93% of its initial mobility even when subjected to 100% strain (1.41 ± 0.206 cm2 V-1 s-1). Furthermore, thin film devices of HBSP-72h-2.5 remain stable after undergoing repeated stretching and releasing cycles. Notably, the mobilities are independent of the stretching directions, showing isotropic charge transport behavior. The preliminary study makes this "pre-endcapping" strategy a potential candidate for the future design of organic materials for flexible electronic devices.

The Balance Effect of π-π Electronic Coupling on NIR-II Emission and Photodynamic Properties of Highly Hydrophobic Conjugated Photosensitizers.

Deep NIR organic phototheranostic molecules generally have large π-conjugation structures and show highly hydrophobic properties, thus, forming strong π-π stacking in the aqueous medium, which will affect the phototheranostic performance. Herein, an end-group strategy is developed to lift the performance of NIR-II emitting photosensitizers. Extensive characterizations reveal that the hydrogen-bonding interactions of the hydroxyl end group can induce a more intense π-π electronic coupling than the chlorination-mediated intermolecular forces. The results disclose that π-π stacking will lower fluorescence quantum yield but significantly benefit the photodynamic therapy (PDT) efficiency. Accordingly, an asymmetrically substituted derivative (BTIC-δOH-2Cl) is developed, which shows balanced phototheranostic properties with excellent PDT efficiency (14.6 folds of ICG) and high NIR-II fluorescence yield (2.27%). It proves the validity of the end-group strategy on controlling the π-π interactions and rational tuning the performance of NIR-II organic phototheranostic agents.

Highly-Efficient 2D Nonfullerene Acceptors Enabled by Subtle Molecular Tailoring Engineering.

The conjugate expansion of nonfullerene acceptors is considered to be a promising approach for improving organic photovoltaic performance because of its function in tuning morphological structure and molecular stacking behavior. In this work, two nonfullerene acceptors are designed and synthesized using a 2D π-conjugate expansion strategy, thus enabling the construction of highly-efficient organic solar cells (OSCs). Compared with YB2B (incorporating dibromophenanthrene on the quinoxaline-fused core), YB2T (incorporating dibromobenzodithiophene on the quinoxaline-fused core) has red-shifted spectral absorption and better charge transport properties. Moreover, the more orderly and tightly intermolecular stacking of YB2T provides the possibility of forming a more suitable phase separation morphology in blend films. Through characterization and analysis, the YB2T-based blend film is found to have higher exciton dissociation efficiency and less charge recombination. Consequently, the power conversion efficiency (PCE) of 17.05% is achieved in YB2T-based binary OSCs, while YB2B-based devices only reached 10.94%. This study demonstrates the significance of the aromatic-ring substitution strategy for regulating the electronic structure and aggregation behavior of 2D nonfullerene acceptors, facilitating the development of devices with superior photovoltaic performance.

Trifluoromethylation in the Design and Synthesis of High-Performance Wide Bandgap Polymer Donors for Quasiplanar Heterojunction Organic Solar Cells.

New strategies for the molecular design to construct efficient electron-deficient units for D-A-type donor copolymers are urgently needed. Halogenation of electron-deficient units (A) has been shown to be the most effective strategy reported to date with which to produce high-performance donor polymers. Herein, we have constructed two different trifluoromethyl-substituted polymer donors, PBQP-CF3 and PBQ-CF3. The trifluoromethylation process typically involves complex protocols, which are not widely used in the synthesis of polymer donors. Accordingly, we have developed a single-step, one-pot synthesis of the new trifluoromethyl-substituted electron-deficient unit (A) of PBQ-CF3. The strong electron-withdrawing ability of the trifluoromethyl group ensures deeper highest occupied molecular orbital (HOMO) energy levels, and the non-covalent bonding interactions of the fluorine atoms are beneficial to the regulation of aggregation properties. Thus, both of the trifluoromethyl-substituted polymer donors obtained much higher power conversion efficiency (PCE) than PBDP-H (6.66%). PBQ-CF3 exhibits a deeper HOMO energy level, better aggregation behavior, and higher hole mobility than PBQP-CF3. PBQ-CF3-based quasiplanar heterojunction (Q-PHJ) devices therefore achieve simultaneously enhanced open-circuit voltage (VOC), short-circuit current density (JSC), and fill factor (FF) and an impressive PCE (16.02%), which is much higher than that obtained by PBQP-CF3-based devices (12.57%). This work reveals a promising path to synthesis of the trifluoromethylation polymer donors and demonstrates that the trifluoromethylation strategy can be used to enhance the photovoltaic performance.

End-Group Modifications with Bromine and Methyl in Nonfullerene Acceptors: The Effect of Isomerism.

The development of isomeric molecules has been widely exploited in molecular structures associated with organic solar cells (OSC) and is an effective pathway to finely tune the photoelectric properties and device performance. The molecular properties of nonfullerene acceptors and the morphology of blend films can be effectively controlled by manipulating isomeric substituent positions on benzene-fused end-capping groups (EG) in acceptors. Here, three isomeric EGs were designed and synthesized which simultaneously possess an electron-withdrawing bromine and an electron-donating methyl substituent. By linking three isomeric EGs, (Br,Me), (Br,Me)-1, and (Br,Me)-2 each with the BTP-CHO core, three isomeric small-molecule acceptors (SMA) were obtained. The power conversion efficiency (PCE) of PM6:BTP-(Br,Me)-1-based OSCs is 13.43%, is much higher than that of PM6:BTP-(Br,Me)- (11.92%) and PM6:BTP-(Br,Me)-2- (11.08%) based devices. Our results show that isomeric EGs can provide strategies to tune the absorption spectra of SMAs, intramolecular charge transfer (ICT) and electron mobility of organic semiconductor device, and ultimately increase the performance of nonfullerene acceptors.

Chlorinated Benzo[1,2-b:4,5-c']dithiophene-4,8-dione Polymer Donor: A Small Atom Makes a Big Difference.

The position of a chlorine atom in a charge carrier of polymer solar cells (PSCs) is important to boost their photovoltaic performance. Herein, two chlorinated D-A conjugated polymers PBBD-Cl-α and PBBD-Cl-ß are synthesized based on two new building blocks (TTO-Cl-α and TTO-Cl-ß) respectively by introducing the chlorine atom into α or ß position of the upper thiophene of the highly electron-deficient benzo[1,2-b:4,5-c']dithiophene-4,8-dione moiety. Single-crystal analysis demonstrates that the chlorine-free TTO shows a π-π stacking distance (d π-π) of 3.55 Å. When H atom at the α position of thiophene of TTO is replaced by Cl, both π-π stacking distance (d π-π = 3.48 Å) and Cl···S distance (d Cl-S = 4.4 Å) are simultaneously reduced for TTO-Cl-α compared with TTO. TTO-Cl-ß then showed the Cl···S non-covalent interaction can further shorten the intermolecular π-π stacking separation to 3.23 Å, much smaller than that of TTO-Cl-α and TTO. After blending with BTP-eC9, PBBD-Cl-ß:BTP-eC9-based PSCs achieved an outstanding power conversion efficiency (PCE) of 16.20%, much higher than PBBD:BTP-eC9 (10.06%) and PBBD-Cl-α:BTP-eC9 (13.35%) based devices. These results provide an effective strategy for design and synthesis of highly efficient donor polymers by precise positioning of the chlorine substitution.