Impact of amino acids and sugars after thermal processing on acrylamide formation in synthetic potato models and real potatoes.

Amino acids and sugars, along with the thermal processing, are considered the main parameters to control acrylamide formation in fried potatoes. To evaluate which of these parameters had the greatest influence, 10 synthetic potato-starch-based models formulated in different amino acid and/or sugar combinations and three potato cultivars were assigned. High-performance-liquid chromatography and gas chromatography flame-ionized-detectors were applied to quantify amino acids, sugars, and acrylamide. Results showed that reducing sugars and sucrose significantly increased acrylamide formation amongst all potato samples. Synthetic potato models Asn-GFS contained the highest amount of acrylamide compared to Glu-Fru and real potatoes (Agria and Kennebec). Thus, sugars were considered critical factors for acrylamide formation in potatoes and remained the most practical way of reducing its production.

Are Citric Acid-Iron II Complexes True Chelates or Just Physical Mixtures and How to Prove This?

Although mineral chelates are widely produced to be used as food fortifiers, the proof that these complexes are chelates is still missing. In our present work, iron II complexes using citric acid in different ratios are produced, and the occurrence of chelation is investigated along with its behavior according to a molar ratio between the ligand and the mineral. High performance liquid chromatography (HPLC), flame atomic absorption spectroscopy (FAAS), ultraviolet-visible spectroscopy (UV-Vis), Fourier-transform infrared (FTIR), and near infrared spectroscopy (NIR) were used for a non-structural characterization of these complexes. In contrast to published work, our findings show that the chelation of citric acid is achieved in the liquid form and at a low pH and that the molar ratio is very important in setting the direction of the reaction, either toward chelation or dimer formation. The ratio citric acid:iron 1:4 seems to be the most convenient ratio in which no free citric acid remains in the solution, while the 1:3 ratio behaves differently, requiring further investigations by such techniques as extended X-ray absorption fine structure spectroscopy (EXAFS), among others, in order to deeply identify the structural organization occurring in this ratio. NIR, extensively used in industries, proved to be very useful in the demonstration and characterization of chelates. These findings are particularly advantageous for pharmaceutical and food industries in offering an innovative competent fortifying agent to be used in combatting iron deficiency.

Study the interaction of amino acids, sugars, thermal treatment and cooking technique on the formation of acrylamide in potato models.

This study unveiled the effect of the suspected precursors of acrylamide (asparagine, glutamine) combined/separated with different formulations of glucose, fructose, and sucrose. To better understand the interaction between acrylamide precursors, cooking technique (deep vs air frying), and temperature (170 °C vs 190 °C), seven potato models from starch, sugars, amino acids, water and hydrocolloids (alginate and agar) were formulated. In line with previous findings, the present results showed that asparagine, glucose and fructose played an important role in acrylamide formation in these synthetic potato models. Furthermore, glutamine and sodium alginate might have an inhibitory effect on acrylamide formation. A significant impact of frying technique was also revealed. On the other hand, GC-FID analysis detected acrylamide in only these three models, (glucose-fructose, sucrose and asparagine-glucose/fructose/sucrose models > LOD 333.33 µg.kg-1).

Edible Insect Consumption for Human and Planetary Health: A Systematic Review.

This systematic review aimed to examine the health outcomes and environmental impact of edible insect consumption. Following PRISMA-P guidelines, PubMed, Medline ProQuest, and Cochrane Library databases were searched until February 2021. Twenty-five articles met inclusion criteria: twelve animal and six human studies (randomized, non-randomized, and crossover control trials), and seven studies on sustainability outcomes. In animal studies, a supplement (in powdered form) of 0.5 g/kg of glycosaminoglycans significantly reduced abdominal and epididymal fat weight (5-40% and 5-24%, respectively), blood glucose (10-22%), and total cholesterol levels (9-10%), and a supplement of 5 mg/kg chitin/chitosan reduced body weight (1-4%) and abdominal fat accumulation (4%) versus control diets. In other animal studies, doses up to 7-15% of edible insect inclusion level significantly improved the live weight (9-33%), reduced levels of triglycerides (44%), cholesterol (14%), and blood glucose (8%), and increased microbiota diversity (2%) versus control diet. In human studies, doses up to 7% of edible insect inclusion level produced a significant improvement in gut health (6%) and reduction in systemic inflammation (2%) versus control diets and a significant increase in blood concentrations of essential and branched-chain amino acids and slowing of digestion (40%) versus whey treatment. Environmental indicators (land use, water footprint, and greenhouse gas emissions) were 40-60% lower for the feed and food of edible insects than for traditional animal livestock. More research is warranted on the edible insect dose responsible for health effects and on environmental indicators of edible insects for human nutrition. This research demonstrates how edible insects can be an alternative protein source not only to improve human and animal nutrition but also to exert positive effects on planetary health.

Preparing a Personalized Meal by Using Soy, Cricket, and Egg Albumin Protein Based on 3D Printing.

Recently, personalized meals and customized food design by means of 3D printing technology have been considered over traditional food manufacturing methods. This study examined the effects of different proteins (soy, cricket, and egg albumin protein) in two concentrations (3% and 5%) on rheological, textural, and 3D printing characteristics. The textural and microstructural properties of different formulations were evaluated and compared. The addition of soy and cricket protein induced an increase in yield stress (τ0), storage modulus (G'), and loss modulus (G″) while egg albumin protein decreased these parameters. The textural analysis (back extrusion and force of extrusion) demonstrated the relationship between increasing the amount of protein in the formula with an improvement in consistency and index of viscosity. These values showed a straight correlation with the printability of fortified formulas. 3D printing of the different formulas revealed that soy and cricket proteins allow the targeting of complex geometry with multilayers.

New approaches, bioavailability and the use of chelates as a promising method for food fortification.

Food fortification has been used for many years to combat micronutrient deficiencies; the main challenge with food fortification is the combination of a bioavailable, affordable fortificant with the best (food) vehicle as a carrier to reach at-risk populations. This paper considers mineral deficiencies, especially iron, food fortification, target populations, and the use of chelates in food fortification, as well as different types of mineral-chelate complexes, advantages and limitations of previous trials, methods used for analysis of these complexes, bioavailability of minerals, factors influencing it, and methods particularly those in vitro for predicting outcomes. Three innovative methods (encapsulation, nanoparticulation, and chelation) were explored, which aim to overcome problems associated with conventional fortification, especially those affecting organoleptic properties and bioavailability; but often lead to the emergence of new limitations (for example instability, impracticality and high costs) requiring further research.

Diet and Exercise Modulate GH-IGFs Axis, Proteolytic Markers and Myogenic Regulatory Factors in Juveniles of Gilthead Sea Bream (Sparus aurata).

The physiological and endocrine benefits of sustained exercise in fish were largely demonstrated, and this work examines how the swimming activity can modify the effects of two diets (high-protein, HP: 54% proteins, 15% lipids; high-energy, HE: 50% proteins, 20% lipids) on different growth performance markers in gilthead sea bream juveniles. After 6 weeks of experimentation, fish under voluntary swimming and fed with HP showed significantly higher circulating growth hormone (GH) levels and plasma GH/insulin-like growth-1 (IGF-1) ratio than fish fed with HE, but under exercise, differences disappeared. The transcriptional profile of the GH-IGFs axis molecules and myogenic regulatory factors in liver and muscle was barely affected by diet and swimming conditions. Under voluntary swimming, fish fed with HE showed significantly increased mRNA levels of capn1, capn2, capn3, capns1a, n3, and ub, decreased gene and protein expression of Ctsl and Mafbx and lower muscle texture than fish fed with HP. When fish were exposed to sustained exercise, diet-induced differences in proteases' expression and muscle texture almost disappeared. Overall, these results suggest that exercise might be a useful tool to minimize nutrient imbalances and that proteolytic genes could be good markers of the culture conditions and dietary treatments in fish.

Impact of COVID-19 Pandemic on Willingness to Consume Insect-Based Food Products in Catalonia.

Edible insects are being considered as a sustainable source of protein and are continuously appearing in markets in the West. The impact of COVID-19 on the willingness to consume (WTC) two products enriched with insect ingredients, jam and yogurt, was analyzed. A semistructured questionnaire was applied using the Qualtrics© consumer panel. Data was collected from 799 and 481 consumers before and during the COVID-19 lockdown in Catalonia (Spain), respectively. The multinomial logit (MNL) model was used to analyze the determinant factors affecting consumers' WTC insect-based products and the impact of COVID-19 on such heterogeneity. Results showed that the outbreak of COVID-19 caused a significant decrease in the WTC. Findings also revealed that consumers who contracted the COVID-19, strictly followed the regulations during the confinement, and are well informed about symptoms were more likely to reject the consumption of the insect-based products. Both before and during the lockdown, results showed that young and employed consumers, with low-income level, who give importance to the environmental attribute in food are prone to consume insect-based food products. The COVID-19 outbreak had a homogenizing impact on consumers' WTC with respect to the gender variable. Consumers' affirmation towards strict food safety standards of the insect-based products should be remarked.

The effect of borage, ginger and fennel extracts on acrylamide formation in French fries in deep and electric air frying.

The aim of this study was to evaluate the effect of three Lebanese wild plant extracts on acrylamide (AA) content in French fries, and to investigate the impact of air frying (AF) and deep frying (DF) techniques against AA formation. HPLC showed higher level of AA in DF (1384.79 ng/g) than in AF (163.1 ng/g). Indeed, the plant extracts of ginger, borage and fennel succeeded to decrease AA (59.67, 67.99, and 73.36% in (AF) and 21.91, 66.29 and 29.15% in (DF) respectively)in both fryers. Accordingly, borage fennel and ginger with their high scavenging activity (86.09%, 89.11% 93.67% respectively) and total phenolic contents (298.61, 117.79 and 97.36 of GAE respectively) can act as healthy beneficial pre-treatment, overall reducing AA in potato fries particularly in AF. This study was the first to reveal the importance of using plant extract in reducing AA in potato fries, a staple Lebanese food.

Tomato and Melon Meloidogyne Resistant Rootstocks Improve Crop Yield but Melon Fruit Quality Is Influenced by the Cropping Season.

Four rotation sequences consisting of ungrafted tomato cv. Durinta - melon cv. Paloma or tomato grafted onto the resistant rootstock 'Aligator' - melon grafted onto the resistant Cucumis metuliferus accession BGV11135, and in reverse order, were conducted from 2015 to 2017 in a plastic greenhouse infested or not with Meloidogyne incognita to determine the plant tolerance (T), the minimum relative crop yield (m) and fruit quality. The relationship between M. incognita densities in soil at transplanting (Pi) of each crop and the crop yield was assessed and T and m were estimated by the Seinhorst's damage model. In addition, the volume and the number of nuclei of single giant cells and the number of giant cells, its volume and the number of nuclei per feeding site in susceptible tomato and melon were compared to those in the resistant tomato and C. metuliferus 15 days after nematode inoculation in pot test. The relationship between the Pi and the relative crop yield fitted the Seinhorst's damage model in both ungrafted and grafted tomato and melon, but not for all years and cropping seasons. The estimated T for ungrafted and grafted tomato did not differ but m was lower in the former (34%) than the latter (67%). Sodium concentration in fruits from ungrafted but not from grafted tomato increased with nematode densities in spring 2015 and 2016. The estimated ungrafted melon T did not differ from the grafted melon cultivated in spring, but it did when it was cultivated in summer. The relative crop yield of ungrafted melon was lower (2%) than the grafted cultivated in spring (62%) and summer (20%). Sodium concentration in melon fruits from ungrafted plants increased with nematode densities. No variations in fruit quality from grafted melon cultivated in spring were found, although less dry matter and soluble solid content at highest nematode densities were registered when it was cultivated in summer. Lower number of giant cells per feeding site was observed in both susceptible tomato germplasms compared to the resistant ones but they were more voluminous and held higher number of nuclei per giant cell and per feeding site.

Assessing Mechanical and Rheological Properties of Potato Puree: Effect of Different Ingredient Combinations and Cooking Methods on the Feasibility of 3D Printing.

The effects of agar, alginate, butter, olive oil, and carrots on the mechanical and rheological properties of potato puree prepared by two different cooking methods (microwave heating (MP) and boiling (BP)) were investigated and interpreted in terms of starch microstructural changes. Microscopic observations revealed more aggregated and densely concentrated starch granules in MP samples. This consequently led to a significant increase (p < 0.05) in mechanical and rheological properties up to five times more than BP samples. All samples exhibited shear thinning non-Newtonian behavior. Butter proved its ability to maintain stiff network formation with starch molecules forming lipid-starch complexes characterized by high retention properties and increased stability due to high thixotropic and yield stress values. The pseudo-plasticity combined with high self-supporting ability (high yield stress and mechanical values) comprised by MP samples allows them to better behave during advanced technological processes such as extrusion 3D food printing.

Characterization of food additive-potato starch complexes by FTIR and X-ray diffraction.

Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques were used to study the effect of four food additives, agar, alginate, lecithin and glycerol, at three different concentrations, 0.5, 1 and 1.5%, on the molecular structure of potato puree prepared from commercial potato powder. Vibrational spectra revealed that the amylose-amylopectin skeleton present in the raw potato starch was missing in the potato powder but could be fully recovered upon water addition when the potato puree was prepared. FTIR peaks corresponding to water were clearly present in the potato powder, indicating the important structural role of water molecules in the recovery of the initial molecular conformation. None of the studied puree samples presented a crystalline structure or strong internal order. A comparison of the FTIR and XRD results revealed that the additives exerted some effects, mainly on the long-range order of the starch structure via interacting with and changing -OH and hydrogen bond interactions.

Assessing the microstructural and rheological changes induced by food additives on potato puree.

The effects of agar, alginate, lecithin and glycerol on the rheological properties of commercial potato puree were investigated and interpreted in terms of starch microstructural changes, and the applicability of the Cox-Merz rule was evaluated. Each additive was applied separately at two concentrations (0.5 and 1%). Microscopic observations revealed more swollen starch aggregations in lecithin and glycerol compared with those of potato puree and agar, consequently affecting the rheological properties of potato puree. All samples exhibited shear thinning non-Newtonian behaviour. Rheological measurements were strongly concentration dependent. At 0.5% concentration, additives exerted decreases in all the rheological properties of potato puree in the order of glycerol>alginate>lecithin>agar, while at 1% concentration, the order changed to glycerol>lecithin>alginate, whereas 1% agar behaved differently, increasing all rheological values. This study also showed that agar and alginate in addition to potato puree could be valuable and advantageous for further technological processes, such as 3D printing.

Effect of the intensity of cooking methods on the nutritional and physical properties of potato tubers.

The different intensities of common culinary techniques (boiling, baking and microwaving) produce several changes that reduce the nutritional and physical properties of potatoes. This study evaluated the effect of those cooking methods on the quality of commercial potato tubers (Agata, Kennebec, Caesar and Red Pontiac). The higher weight losses were obtained for baking, but the potato softening depended on the cultivar. Color losses were independent of the intensity of the treatment; however, microwaving promoted a prompt starch gelatinization with respect to the other methods. The resistant starch retention of baking and microwaving was higher than that of boiling, and the maximum retention of bioactive compounds was obtained with the lower core temperature during boiling, as well as higher temperature and shorter baking time and the lower power and longer microwaving time. Principal component analysis revealed significant relationships between the instrumental and functional properties of cooked potatoes.

Classification of potato cultivars to establish their processing aptitude.

BACKGROUND: The commercial potato cultivars are diverse not only in their physical characteristics but also in their nutritional compositions and their content of functional compounds (resistant starch, total phenolic content and antioxidant activity), but there is little information about these differences. The aim of this study was to characterise the nutritional value (focusing on carbohydrates and functional compounds) and instrumental parameters of eight potato cultivars consumed in Spain and to determine whether these parameters are useful for classifying the cultivars. RESULTS: Significant Pearson's correlations were found due to the common and complex interactions between the constituents of potatoes and their properties (P < 0.05). Principal component analysis revealed the correlations among the physicochemical properties, and the first two principal components explained 56.84% of the variance among the cultivars studied. CONCLUSION: The eight cultivars could be classified into three groups: (1) Red Pontiac, Caesar, Kennebec, Agria and Cherie cultivars, (2) Agata and Monalisa cultivars and (3) Spirit cultivar. The results demonstrated that certain nutritional and functional parameters indicated the potential efficacy of different cultivars to satisfy the nutritional needs of consumers, improving the knowledge on the biochemical basis of potato processing to obtain higher-quality products.

Comparison of polysulfone and ceramic membranes for the separation of phenol in micellar-enhanced ultrafiltration.

Micellar-enhanced ultrafiltration (MEUF) of phenol and a cationic surfactant, cetylpyridinium chloride (CPC), is studied using two polysulfone membranes of 5- and 50-kDa molecular weight cutoff (MWCO) and two ceramic membranes of 15- and 50-kDa MWCO. Filtrations are run under laminar cross-flow and steady-state conditions. The effect of operation variables (pressure and retentate flux) and membrane properties (nature and MWCO) on permeate flux, surfactant, and phenol rejections is analyzed. The permeate flux depends, among other variables, on the fouling favored by membrane-micelle interactions, which are strongest in the 50-kDa MWCO ceramic membrane. On the other hand, surfactant rejection is mainly determined by the pore size and influenced by the pressure for both 50-kDa MWCO membranes. An equilibrium distribution constant, K(s), of phenol between surfactant micelles and water is calculated. Its value is not significantly affected by operation conditions and membrane type. K(s) is also approximately 20% lower than the value determined in a previous work with batch dead-end ultrafiltration.