Grafting of Organophosphonic Acid Monolayers on Hydrogen-Terminated Silicon Surface and Secondary Functionalization in Supercritical Carbon Dioxide Media.

The monolayer grafting on the oxide-free Si surface is challenging due to vulnerability of the surface against oxide formation in an ambient atmosphere. Most of the conventional studies focused on organic solvent-based chemistry and solvent and substrate interfaces, and residual solvents after the monolayer grafting play a key role in producing the highly stable monolayers. CO2 in its supercritical state (SCCO2) provides an elegant engineering solution for the problem faced as it can be used as inert processing environment and as carrier fluid for monolayer grafting taking up the role of organic solvents. In this work, monolayers of alkyl organophosphonic acids (OPAs) and functional OPAs were grafted on hydrogen-terminated oxide-free Si surfaces using the SCCO2 process. Grafted monolayers were physically and chemically characterized to verify the successful monolayer formation and determine the nature of the covalent binding configuration on the surface. To broaden the prospects of practical utility of the process and the OPA monolayer, the (3-bromopropyl)phosphonic acid (BPPA) monolayer was demonstrated to undergo secondary functionalization by terminal group substitution to convert the Br terminal group to the OH terminal group and secondary monolayer grafting to assemble 4-fluorothiophenol on top of the BPPA monolayer. The ability of monolayers to sustain secondary functionalization processing qualitatively hints toward ordered and stable monolayers of OPAs. The developed SCCO2 process in this work presents a single-step, green, and scalable method to graft the OPA monolayer on oxide-free Si which can employed in the future for monolayer doping, highly selective biochemical sensors, and targeted biological interactions.

Universal Single-Step Approach to the Immobilization of Cyclodextrins in a Supercritical Medium for Capturing Drug, Dye, and Metal Nanoclusters.

By utilizing nanoreactor-like structures, the immobilization of macromolecules such as calixarenes and cyclodextrins (CD) with bucket-like structures provides new possibilities for engineered surface-molecule systems. The practical use of any molecular system depends on the availability of a universal procedure for immobilizing molecules with torus-like structures on various surfaces while maintaining identical operating parameters. There are currently several steps, including toxic solvent-based approaches using modified ß-CD to covalently attach to surfaces with multistep reactions. However, the existing multistep process results in molecular orientation, restricts the accessibility of the hydrophobic barrel of ß-CD's for practical use, and is effectively unable to use the surfaces immobilized with ß-CD for a variety of applications. In this study, it was demonstrated that ß-CD attached to the oxide-based semiconductor and metal surfaces through a condensation reaction between the hydroxyl-terminated oxide-based semiconductor/metal oxide and ß-CD in supercritical carbon dioxide (SCCO2) as a medium. The primary benefit of SCCO2-assisted grafting of unmodified ß-CD on various oxide-based metal and semiconductor surfaces is that it is a simple, efficient, one-step process and that it is ligand-free, scalable, substrate-independent, and uses minimal energy. Various physical microscopy and chemical spectroscopic methods were used to analyze the grafted ß-CD oligomers. The application of the grafted ß-CD films was demonstrated by the immobilization of rhodamine B (RhB), a dye, and dopamine, a drug. The in situ nucleation and growth of silver nanoclusters (AgNCs) in the molecular systems were studied for antibacterial and tribological properties by utilizing the guest-host interaction ability of ß-CD.

Highly Stable Bonding of Thiol Monolayers to Hydrogen-Terminated Si via Supercritical Carbon Dioxide: Toward a Super Hydrophobic and Bioresistant Surface.

Oxide-free silicon chemistry has been widely studied using wet-chemistry methods, but for emerging applications such as molecular electronics on silicon, nanowire-based sensors, and biochips, these methods may not be suitable as they can give rise to defects due to surface contamination, residual solvents, which in turn can affect the grafted monolayer devices for practical applications. Therefore, there is a need for a cleaner, reproducible, scalable, and environmentally benign monolayer grafting process. In this work, monolayers of alkylthiols were deposited on oxide-free semiconductor surfaces using supercritical carbon dioxide (SCCO2) as a carrier fluid owing to its favorable physical properties. The identity of grafted monolayers was monitored with Fourier transform infrared (FTIR) spectroscopy, high-resolution X-ray photoelectron spectroscopy (HRXPS), XPS, atomic force microscopy (AFM), contact angle measurements, and ellipsometry. Monolayers on oxide-free silicon were able to passivate the surface for more than 50 days (10 times than the conventional methods) without any oxide formation in ambient atmosphere. Application of the SCCO2 process was further extended by depositing alkylthiol monolayers on fragile and brittle 1D silicon nanowires (SiNWs) and 2D germanium substrates. With the recent interest in SiNWs for biological applications, the thiol-passivated oxide-free silicon nanowire surfaces were also studied for their biological response. Alkylthiol-functionalized SiNWs showed a significant decrease in cell proliferation owing to their superhydrophobicity combined with the rough surface morphology. Furthermore, tribological studies showed a sharp decrease in the coefficient of friction, which was found to be dependent on the alkyl chain length and surface bond. These studies can be used for the development of cost-effective and highly stable monolayers for practical applications such as solar cells, biosensors, molecular electronics, micro- and nano- electromechanical systems, antifouling agents, and drug delivery.

Sensors: A Highly Sensitive Diketopyrrolopyrrole-Based Ambipolar Transistor for Selective Detection and Discrimination of Xylene Isomers (Adv. Mater. 21/2016).

An ambipolar organic field-effect transistor (OFET) based on poly(diketopyrrolopyrrole-terthiophene) (PDPPHD-T3) is shown by P. Sonar, H. Haick, and co-workers on page 4012 to sensitively detect xylene isomers at low to 40 ppm level in multiple sensing features. Combined with pattern-recognition algorithms, a sole ambipolar FET sensor, rather than arrays of sensors, is able to discriminate highly similar xylene structural isomers from each other.

A Highly Sensitive Diketopyrrolopyrrole-Based Ambipolar Transistor for Selective Detection and Discrimination of Xylene Isomers.

An ambipolar poly(diketopyrrolopyrrole-terthiophene)-based field-effect transistor (FET) sensitively detects xylene isomers at low ppm levels with multiple sensing features. Combined with pattern-recognition algorithms, a sole ambipolar FET sensor, rather than arrays of sensors, can discriminate highly similar xylene structural isomers from one another.

Antibacterial, electrospun nanofibers of novel poly(sulfobetaine) and poly(sulfabetaine)s.

Polymers capable of forming hydration layers have gained increasing attention due to their ability to form environmentally friendly antifouling surfaces. Zwitterionic polymers are an important class of materials under this category. However, the effectiveness of many zwitterionic polymers for long-term applications is compromised because of their solubility in sea water, poor hydrolytic stability and deteriorating mechanical integrity upon wetting. This study reports on the preparation and characterization of electrospun fibers derived from novel polysulfobetaine and polysulfabetaines (PSBs) composed of polyvinylbenzyl backbones. The morphology of the electrospun nanofibers was elucidated with the help of a scanning electron microscope. Hydration studies were conducted in deionized water and artificial sea water. Antifouling performance of the electrospun nanofibers was evaluated by studying the adhesion and growth of bacteria in natural, and filtered sea water. Terminal restriction fragment length polymorphism (TRFLP) fingerprinting was performed to determine the nature of the bacterial community attached to the electrospun fibers. Some of the PSBs prevented bacterial growth without showing any biocidal nature. Thus the findings of this study are potentially relevant for current trends seeking environmentally friendly antifouling solutions.

Application of Organophosphonic Acids by One-Step Supercritical CO2 on 1D and 2D Semiconductors: Toward Enhanced Electrical and Sensing Performances.

Formation of dense monolayers with proven atmospheric stability using simple fabrication conditions remains a major challenge for potential applications such as (bio)sensors, solar cells, surfaces for growth of biological cells, and molecular, organic, and plastic electronics. Here, we demonstrate a single-step modification of organophosphonic acids (OPA) on 1D and 2D structures using supercritical carbon dioxide (SCCO2) as a processing medium, with high stability and significantly shorter processing times than those obtained by the conventional physisorption-chemisorption method (2.5 h vs 48-60 h).The advantages of this approach in terms of stability and atmospheric resistivity are demonstrated on various 2D materials, such as indium-tin-oxide (ITO) and 2D Si surfaces. The advantage of the reported approach on electronic and sensing devices is demonstrated by Si nanowire field effect transistors (SiNW FETs), which have shown a few orders of magnitude higher electrical and sensing performances, compared with devices obtained by conventional approaches. The compatibility of the reported approach with various materials and its simple implementation with a single reactor makes it easily scalable for various applications.

Deposition of zwitterionic polymer brushes in a dense gas medium.

Poly(sulfobetaine methacrylate) (PSBMA) films known for their resistance to nonspecific protein adsorption, cell/bacterial adhesion and biofilm formation were produced by surface initiated polymerization on a silicon surface via a batch reaction system in CO2 expanded liquid (CO2-EL) medium. Atom transfer radical polymerization (ATRP) was carried out using 2,2'-bipyridyl as ligand and CuBr as a catalyst in water/methanol mixture with trichloro[4-(chloromethyl)phenyl]silane (CMPS) used as the initiating species. The films were grown in the CO2-EL environment at a range of conditions and thickness up to 10nm. In contrast to films produced by conventional solvent systems at atmospheric pressure, the polymer films grown by the CO2-EL process showed uniform thickness and pin-hole free topography. Most importantly, the CO2-EL processed PSBMA films showed no trace of copper (used as the catalyst), thus obviating the need for post-deposition processing and avoiding adverse effects of the metal leaching during service. Finally, PSBMA films from both the conventional and CO2-EL processes were exposed to Human mesenchymal stem cells (hMSCs) and the results showed that, while in both the cases the cell proliferation rate was inhibited by the charged polymeric brush surface, the CO2-EL-processed brush exhibited inhibition to a larger extent due to the reduced occurrence of pinholes. The process can be easily exploited effectively when carrying out surface initiated polymerization on non-flat topographies, such as in trenches and nanostructured features with high aspect ratios.

Imprinting of metal receptors into multilayer polyelectrolyte films: fabrication and applications in marine antifouling.

Polymeric films constructed using the layer-by-layer (LbL) fabrication process were employed as a platform for metal ion immobilization and applied as a marine antifouling coating. The novel Cu2+ ion imprinting process described is based on the use of metal ion templates and LbL multilayer covalent cross-linking. Custom synthesized, peptide mimicking polycations composed of histidine grafted poly(allylamine) (PAH) to bind metal ions, and methyl ester containing polyanions for convenient cross-linking were used in the fabrication process. Two methods of LbL film formation have been investigated using alternate polyelectrolyte deposition namely non-imprinted LbLA, and imprinted LbLB. Both LbL films were cross linked at mild temperature to yield covalent bridging of the layers for improved stability in a sea water environment. A comparative study of the non-imprinted LbLA films and imprinted LbLB films for Cu2+ ion binding capacity, leaching rate and stability of the films was performed. The results reveal that the imprinted films possess enhanced affinity to retain metal ions due to the preorganization of imidazole bearing histidine receptors. As a result the binding capacity of the films for Cu2+ could be improved by seven fold. Antifouling properties of the resulting materials in a marine environment have been demonstrated against the settlement of barnacle larvae, indicating that controlled release of Cu ions was achieved.

Polyion multilayers with precise surface charge control for antifouling.

We report on a molecular fabrication approach to precisely control surface ζ potentials of polymeric thin layers constructed by electrostatic layer-by-layer (LbL) assembly methods. The protocol established allows us to achieve surface isoelectric points (IEP) in the pH range of 6-10. Poly(acrylic acid) (PAA, a weak polyanion) and poly(diallyldimethylammonium chloride) (PDADMAC, a strong polycation) were chosen to build up the bulk films. The weak polycation polyethylenimine (PEI) was applied as a top layer. A unique feature of this approach is that the chemical composition of the top layer is not affected by the manipulation of the ζ potential of the films. Surface charge tuning is achieved by controlling the degree of ionization of the weak polyelectrolytes at various pH values and subsequent manipulation of the amount of polyelectrolyte deposited in the penultimate and last layers, respectively. Following assembly and characterization, the films were used as candidates for antifouling surfaces. The fouling behavior of barnacle cyprids and bacteria on the LbL films with similar hydrophilicity and roughness but different surface charge densities were studied. We found that more cyprids of Amphibalanus amphitrite settled on the negatively charged LbL film compared to the neutral or positively charged LbL film. In bacterial adhesion tests employing Pseudomonas, Escherichia coli, and Staphylococcus aureus, more bacteria were observed on the positively charged LbL film compared with the neutral and negatively charged LbL films, possibly as a result of the negative potential of the bacterial cell wall. The procedures proposed allow one to adjust surface isoelectric points of LbL architectures to achieve optimal antifouling performance of a given material taking into account specific pH values of the environment and the character of the fouler.

Barnacle larvae exploring surfaces with variable hydrophilicity: influence of morphology and adhesion of "footprint" proteins by AFM.

Interaction forces of adhesive proteins employed by cyprid larvae of Amphibalanus amphitrite for temporary attachment during surface exploration in marine fouling were studied by AFM force spectroscopy using chemically modified, reactive colloidal probes. The proteins were covalently attached to the surfaces of the probes by incubation in the protein deposits (footprints) left behind at the surface by the cyprids. This covalent coupling enabled robust and reproducible probing of adhesion of the attachment proteins to model surfaces with variable hydrophilicity. Three model monolayer surfaces were designed and prepared that exhibited different wettabilities derived from variations in the monolayer chemical composition. The morphology and size of cyprid protein deposits was imaged by AFM. The deposits showed larger area of spreading on more hydrophobic surfaces, whereas the overall volume of the secreted proteins exhibited no significant variation. Notable difference in adhesion forces was found among the surfaces by force spectroscopy, with substantially higher values measured on the hydrophobic surface (21 ± 2 nN) than that measured on the more hydrophilic surface (7.2 ± 1 nN). The same surfaces were also tested in laboratory essays. Rather surprisingly, no significant differences were found in values of fractional cyprid settlement among the surfaces studied, indicating that variations of surface wettability and adhesion strength of settlement proteins may be insufficient to explain settlement trends.

Bulk heterojunction nanomorphology of fluorenyl hexa-peri-hexabenzocoronene-fullerene blend films.

In this study, the nanomorphology of fluorenyl hexa-peri-hexabenzocoronene:[6,6]-phenyl C61-butyric acid methyl ester (FHBC:PC61BM) absorber layers of organic solar cells was investigated. Different electron microscopical techniques, atomic force microscopy, and grazing incidence wide-angle X-ray scattering were applied for a comprehensive nanomorphology analysis. The development of the nanomorphology upon sample annealing and the associated change of the device performance were investigated. It was shown that the annealing process enhances the phase separation and therefore the bulk heterojunction structure. Due to π-π stacking, the FHBC molecules assemble into columnar stacks, which are already present before annealing. While the nonannealed sample consists of a mixture of homogeneously distributed PC61BM molecules and FHBC stacks with a preferential in-plane stack orientation, crystalline FHBC precipitates occur in the annealed samples. These crystals, which consist of hexagonal arranged FHBC stacks, grow with increased annealing time. They are distributed homogeneously over the whole volume of the absorber layer as revealed by electron tomography. The FHBC stacks, whether in the two phase mixture or in the pure crystalline precipitates, exhibit an edge-on orientation, according to results from grazing incidence wide-angle X-ray scattering (GIWAXS), dark-field transmission electron microscopy (DF TEM) imaging and selective area electron diffraction (SAED). The best solar cell efficiencies were obtained after 20 or 40 s sample annealing. These annealing times induce an optimized degree of phase separation between donor and acceptor material.

Coexistence of helical morphologies in columnar stacks of star-shaped discotic hydrazones.

Discotic hydrazone molecules are of particular interest as they form discotic phases where the discs are rigidified by intramolecular hydrogen bonds. Here, we investigate the thermotropic behavior and solid-state organizations of three discotic hydrazone derivatives with dendritic groups attached to their outer peripheries, containing six, eight, and ten carbons of linear alkoxy chains. On the basis of two-dimensional wide angle X-ray scattering (2DWAXS), the elevated temperature liquid crystalline (LC) phases were assigned to a hexagonal columnar (Colh) organization with nontilted hydrazone discs for all three compounds. With WAXS, advanced solid-state nuclear magnetic resonance (SSNMR) techniques, and ab initio computations, the compounds with six and ten carbons of achiral alkoxy side chains were further subjected to studies at 25 °C, revealing complex crystalline phases with rigid columns and flexible side chains. This combined approach led to models of coexisting helical columnar stacking morphologies for both systems with two different tilt/pitch angles between successive hydrazone molecules. The differences in tilt/pitch angles between the two compounds illustrate that the columns with short alkoxy chains (six carbons) are more influenced by the presence of other stacks in their vicinity, while those with long side chains are less tilted due to a larger alkoxy (ten carbons) buffer zone. The formation of different packing morphologies in the crystalline phase of a columnar LC has rarely been reported so far, which suggests the possibility of complex stacking structures of similar organic LC systems, utilizing small molecules as potential materials for applications in organic electronics.

Rational design of benzotrithiophene-diketopyrrolopyrrole-containing donor-acceptor polymers for improved charge carrier transport.

Two new donor-acceptor polymers containing benzo[2,1-b:3,4-b':5,6-c'']trithiophene (BTT) as donor and diketopyrrolopyrrole (DPP) as acceptor are synthesized and applied in OFETs. By tuning the alkyl substituents of the polymers, a striking difference in packing order, thin-film arrangement, and charge carrier transport is observed. The polymer without substituents at the BTT exhibits a hole mobility two orders of magnitude higher than that with alkyl chains therein.

Electrochemically exfoliated graphene as solution-processable, highly conductive electrodes for organic electronics.

Solution-processable thin layer graphene is an intriguing nanomaterial with tremendous potential for electronic applications. In this work, we demonstrate that electrochemical exfoliation of graphite furnishes graphene sheets of high quality. The electrochemically exfoliated graphene (EG) contains a high yield (>80%) of one- to three-layer graphene flakes with high C/O ratio of 12.3 and low sheet resistance (4.8 kΩ/□ for a single EG sheet). Due to the solution processability of EG, a vacuum filtration method in association with dry transfer is introduced to produce large-area and highly conductive graphene films on various substrates. Moreover, we demonstrate that the patterned EG can serve as high-performance source/drain electrodes for organic field-effect transistors.

Solid-State Organization and Ambipolar Field-Effect Transistors of Benzothiadiazole-Cyclopentadithiophene Copolymer with Long Branched Alkyl Side Chains.

The solid-state organization of a benzothiadiazole-cyclopentadithiophene copolymer with long, branched decyl-tetradecyl side chains (CDT-BTZ-C14,10) is investigated. The C14,10 substituents are sterically demanding and increase the π-stacking distance to 0.40 nm from 0.37 nm for the same polymer with linear hexadecyls (C16). Despite the bulkiness, the C14,10 side chains tend to crystallize, leading to a small chain-to-chain distance between lamellae stacks and to a crystal-like microstructure in the thin film. Interestingly, field-effect transistors based on solution processed layers of CDT-BTZ-C14,10 show ambipolar behavior in contrast to CDT-BTZ-C16 with linear side chains, for which hole transport was previously observed. Due to the increased π-stacking distance, the mobilities are only 6 × 10-4 cm²/Vs for electrons and 6 × 10-5 cm²/Vs for holes, while CDT-BTZ-C16 leads to values up to 5.5 cm²/Vs. The ambipolarity is attributed to a lateral shift between stacked backbones provoked by the bulky C14,10 side chains. This reorganization is supposed to change the transfer integrals between the C16 and C14,10 substituted polymers. This work shows that the electronic behavior in devices of one single conjugated polymer (in this case CDT-BTZ) can be controlled by the right choice of the substituents to place the backbones in the desired packing.

Stable Organic Monolayers on Oxide-Free Silicon/Germanium in a Supercritical Medium: A New Route to Molecular Electronics.

Oxide-free Si and Ge surfaces have been passivated and modified with organic molecules by forming covalent bonds between the surfaces and reactive end groups of linear alkanes and aromatic species using single-step deposition in supercritical carbon dioxide (SCCO2). The process is suitable for large-scale manufacturing due to short processing times, simplicity, and high resistance to oxidation. It also allows the formation of monolayers with varying reactive terminal groups, thus enabling formation of nanostructures engineered at the molecular level. Ballistic electron emission microscopy (BEEM) spectra performed on the organic monolayer on oxide-free silicon capped by a thin gold layer reveals for the first time an increase in transmission of the ballistic current through the interface of up to three times compared to a control device, in contrast to similar studies reported in the literature suggestive of oxide-free passivation in SCCO2. The SCCO2 process combined with the preliminary BEEM results opens up new avenues for interface engineering, leading to molecular electronic devices.

Benzotrithiophene-based donor-acceptor copolymers with distinct supramolecular organizations.

Two donor-acceptor copolymers, P1 and P2, containing the novel donor component benzo[2,1-b:3,4-b':5,6-c″]trithiophene were synthesized. Both polymers show small π-stacking distances (0.35 nm for P1 and 0.37 nm for P2) due to the use of the disklike-shaped donor unit. However, they exhibit remarkable differences in supramolecular organization, film microstructure, and transistor performance. Indeed, P1 reveals a distinct supramolecular organization in the bulk in comparison to conventional conjugated polymers, including P2. Interestingly, no charge carrier transport was observed for P1 in field-effect transistors, while P2 exhibited a hole mobility of up to 0.04 cm(2) V(-1) s(-1). This variation in device behavior is attributed to the evidently different degree of curvature in the polymer backbone induced by the introduction of two additional thiophene units in P2.

Catalyst-free functionalization for versatile modification of nonoxidized silicon structures.

Here, we report on a simple, catalyst-free route for obtaining highly versatile subsequent functionalization on Si nanowires and Si(111) substrates. The versatility of this approach allows subsequent functionalization not only for organic species but also for inorganic (nanomaterial) species. The method has the advantage of controlling the density of reactive cross-linkers without affecting the stability of the Si samples and without having metallic (or catalyst) residues on the surface. This method also allows formation of monolayers with a variety of termination groups and is expected to open up a wide range of opportunities for producing stable molecule-based (opto)electronic and (bio)sensing devices. Immobilization of inorganic nanomaterial on the Si samples offers advanced opportunities in molecular switches, (bio)sensors, molecular scale memory, and Si-based nanoelectronic devices.