Caltrop-like Small-Molecule Antidotes That Neutralize Unfractionated Heparin and Low-Molecular-Weight Heparin In Vivo.

Unfractionated heparin (UFH) and low-molecular-weight heparins (LMWHs) are widely applied for surgical procedures and extracorporeal therapies, which, however, suffer bleeding risk. Protamine, the only clinically approved antidote, can completely neutralize UFH, but only partially neutralizes LMWHs, and also has a number of safety drawbacks. Here, we show that caltrop-like multicationic small molecules can completely neutralize both UFH and LMWHs. In vitro and ex vivo assays with plasma and whole blood and in vivo assays with mice and rats support that the lead compound is not only superior to protamine by displaying higher neutralization activity and broader therapeutic windows but also biocompatible. The effective neutralization dose and the maximum tolerated dose of the lead compound are determined to be 0.4 and 25 mg/kg in mice, respectively, suggesting good promise for further preclinical studies.

Creating amphiphilic porosity in two-dimensional covalent organic frameworks via steric-hindrance-mediated precision hydrophilic-hydrophobic microphase separation.

Creating different pore environments within a covalent organic framework (COF) will lead to useful multicompartment structure and multiple functions, which however has been scarcely achieved. Herein we report designed synthesis of three two-dimensional COFs with amphiphilic porosity by steric-hindrance-mediated precision hydrophilic-hydrophobic microphase separation. Dictated by the different steric effect of the substituents introduced to a monomer, dual-pore COFs with kgm net, in which all hydroxyls locate in trigonal micropores while hydrophobic sidechains exclusively distribute in hexagonal mesopores, have been constructed to form completely separated hydrophilic and hydrophobic nanochannels. The unique amphiphilic channels in the COFs enable the formation of Janus membranes via interface growth. This work has realized the creation of two types of channels with opposite properties in one COF, demonstrating the feasibility of introducing different properties/functions into different pores of heteropore COFs, which can be a useful strategy to develop multifunctional materials.

Macrocycles and Acyclic Cucurbit[n]urils as Pseudo[2]catenane Partners for Long-Acting Neuromuscular Blocks and Rapid Reversal In Vivo.

Long-acting neuromuscular blocks followed by rapid reversal may provide prolonged surgeries with improved conditions by omitting repetitive or continuous administration of the neuromuscular blocking agent (NMBA), eliminating residual neuromuscular block and minimizing postoperative recovery, which, however, is not clinically available. Here, we demonstrate that imidazolium-based macrocycles (IMCs) and acyclic cucurbit[n]urils (ACBs) can form such partners by functioning as long-acting NMBAs and rapid reversal agents through a pseudo[2]catenation mechanism based on stable complexation with Ka values of over 109 M-1. In vivo experiments with rats reveal that, at the dose of 2- and 3-fold ED90, one IMC attains a duration of action corresponding to 158 or 442 min for human adults, covering most of prolonged surgeries. The block can be reversed by one ACB with recovery time significantly shorter than that achieved by sugammadex for reversing the block of rocuronium, the clinically most widely used intermediate-acting NMBA.

An Azulene-Based Crystalline Porous Covalent Organic Framework for Efficient Photothermal Conversion.

The designed synthesis of a crystalline azulene-based covalent organic framework (COF-Azu-TP) is presented and its photothermal property is investigated. Azulene, a distinctive 5-7 fused ring non-benzenoid aromatic compound with a large intramolecular dipole moment and unique photophysical characteristics, is introduced as the key feature in COF-Azu-TP. The incorporation of azulene moiety imparts COF-Azu-TP with broad-spectrum light absorption capability and interlayer dipole interactions, which makes COF-Azu-TP a highly efficient photothermal conversion material. Its polyurethane (PU) composite exhibits a solar-to-vapor conversion efficiency (97.2%) and displays a water evaporation rate (1.43 kg m-2 h-1 ) under one sun irradiation, even at a very low dosage of COF-Azu-TP (2.2 wt%). Furthermore, COF-Azu-TP is utilized as a filler in a polylactic acid (PLA)/polycaprolactone (PCL) composited shape memory material, enabling rapid shape recovery under laser stimulation. A comparison study with a naphthalene-based COF isomer further emphasizes the crucial role of azulene in enhancing photothermal conversion efficiency. This study demonstrates the significance of incorporating specific building blocks into COFs for the development of functional porous materials with enhanced properties, paving the way for future applications in diverse fields.

Gradually Tuning the Flexibility of Two-Dimensional Covalent Organic Frameworks via Stepwise Structural Transformation and Their Flexibility-Dependent Properties.

Flexible covalent organic frameworks (COFs) are intriguing for their dynamic properties distinctive from rigid counterparts but still suffer from limited accessibility. Especially, controlling flexibility of COFs is challenging and the impact of different flexibility on properties of COFs has rarely been unveiled. This article reports stepwise adjustment on flexibility of two-dimensional COFs, which is realized by the designed synthesis of rigid COF (R-COF), semi-flexible COF (SF-COF), and flexible COF (F-COF) through polymerization, linker exchange, and linkage conversion with a newly developed method for reduction of hydrazone, respectively. Significant difference in breathing behavior and self-adaptive capability of the three COFs are uncovered through vapor response and iodine capture experiments. Gas sorption experiments indicate that the porosity of F-COF could switch from "close" state in nitrogen to "open" state in carbon dioxide, which are not observed for R-COF and SF-COF. This study not only develops a strategy to adjust the flexibility of COFs by tuning their linkers and linkages, but also provides a deep insight into the impact of different flexibility on properties of COFs, which lays a foundation for the development of this new class of dynamic porous materials.

Surface Engineering in Covalent Organic Polymers for High-Performance Li-S Batteries.

Lithium-sulfur (Li-S) batteries are a promising energy storage technology due to their tempting high theoretical capacity and energy density. Nevertheless, the wastage of active materials that originates from the shuttling effect of polysulfides still hinders advancement of Li-S batteries. The effective design of cathode materials is extremely pivotal to solve this thorny problem. Herein, surface engineering in covalent organic polymers (COPs) has been performed to investigate the influence of pore wall polarity on the performance of COP-based cathodes used for Li-S batteries. With the assistance of experimental investigation and theoretical calculations, performance improvement by increasing pore surface polarity and a synergy effect of the polarized functionalities, along with nano-confinement effect of the COPs, are disclosed, to which the improved performance of Li-S batteries including outstanding Coulombic efficiency (99.0 %) and extremely low capacity decay (0.08 % over 425 cycles at 1.0 C) is attributed. This work not only enlightens the designable synthesis and applications of covalent polymers as polar sulfur hosts with high utilization of active materials, but also provides a feasible guide for the design of effective cathode materials for future advanced Li-S batteries.

Boosting Hydrostability and Carbon Dioxide Capture of Boroxine-Linked Covalent Organic Frameworks by One-Pot Oligoamine Modification.

Boron-based covalent organic frameworks (COFs) are susceptible to nucleophilic attack by water at the electron-deficient boron sites and even slightly humid air could destroy the integrity of their porous frameworks within hours. Such instability is a major limitation to the practical applications of boron-based COFs. Herein we report a significant enhancement of hydrostability of boroxine-linked COFs (COF-1 as representative) by modification with an oligoamine (tetraethylenepentamine, TEPA), which leads to survival of the modified COF in water and long-time stability under humid atmosphere. Meanwhile, the TEPA modification also results in a considerable increase in CO2 adsorption capacity up to 13 times and a dramatic improvement in CO2 /N2 selectivity in low pressure region, which make the modified COF suitable for capturing CO2 from flue gas. This work provides a facile, efficient, and scalable method to greatly improve hydrostability of boroxine-linked COFs and reshape them into high-performance CO2 adsorbents.

One-Dimensional Covalent Organic Framework as High-Performance Cathode Materials for Lithium-Ion Batteries.

Covalent organic frameworks (COFs) have emerged as a new class of cathode materials for energy storage in recent years. However, they are limited to two-dimensional (2D) or three-dimensional (3D) framework structures. Herein, this work reports designed synthesis of a redox-active one-dimensional (1D) COF and its composites with 1D carbon nanotubes (CNTs) via in situ growth. Used as cathode materials for Li-ion batteries, the 1D COF@CNT composites with unique dendritic core-shell structure can provide abundant and easily accessible redox-active sites, which contribute to improve diffusion rate of lithium ions and the corresponding specific capacity. This synergistic structural design enables excellent electrochemical performance of the cathodes, giving rise to 95% utilization of redox-active sites, high rate capability (81% capacity retention at 10 C), and long cycling stability (86% retention after 600 cycles at 5 C). As the first example to explore the application of 1D COFs in the field of energy storage, this study demonstrates the great potential of this novel type of linear crystalline porous polymers in battery technologies.

Host-guest binding of tetracationic cyclophanes to photodynamic agents inhibits posttreatment phototoxicity and maintains antitumour efficacy.

In the past two decades, photodynamic therapy (PDT) has become an effective method for the treatment of cancer. However, the posttreatment residue of photodynamic agents (PDAs) causes long-term skin phototoxicity. Here, we apply naphthalene-derived, box-like tetracationic cyclophanes, named NpBoxes, to bind to clinically used porphyrin-based PDAs to alleviate their posttreatment phototoxicity by reducing their free content in skin tissues and 1O2 quantum yield. We show that one of the cyclophanes, 2,6-NpBox, could include the PDAs to efficiently suppress their photosensitivity for the generation of reactive oxygen species. A tumour-bearing mouse model study revealed that, when Photofrin, the most widely used PDA in clinic, was administrated at a dose corresponding to the clinical one, 2,6-NpBox of the same dose could significantly suppress its posttreatment phototoxicity on the skin induced by simulated sunlight irradiation, without imposing a negative influence on its PDT efficacy.

Converting an amorphous covalent organic polymer to a crystalline covalent organic framework mediated by a repairing agent.

We herein report a new approach to converting an amorphous covalent organic polymer to a crystalline heteropore covalent organic framework (COF), which is promoted by using an additive for structure repair. This provides a new method for the construction of COFs from cross-linked polymers.

A Superhydrophobic Trifluoromethyl-Containing Covalent Organic Framework Membrane for Efficient Oil/Water Separation.

Oily water caused in the process of industry leads to not only the waste of resources, but also environmental pollution. Membrane separation, as a facile and efficient separation technology, has attracted widespread attention in the field of oil/water separation. The development of membrane materials with high separation performance is one of the key elements to improve separation efficiency. In this work, a superhydrophobic membrane composited with a trifluoromethyl-containing covalent organic framework (COF) is prepared, which exhibits excellent performance on separations of oil/water mixtures and water-in-oil emulsions. For different composition of oil/water mixtures, the highest flux of oil is up to 32 000 L m-2  h-1 and oil/water separation efficiency is above 99%. Moreover, the high oil/water separation efficiency remains unchanged after successive cycles. This work provides a feasible scheme for the design of high-efficiency oil/water separation membranes.

Highly Water-Soluble Cucurbit[8]uril Derivative as a Broad-Spectrum Neuromuscular Block Reversal Agent.

Broad-spectrum agents for the reversal of residual curarization induced by neuromuscular blocking agents are of great significance. Here, we report a highly water-soluble cucurbit[8]uril (CB[8]) derivative as a broad-spectrum neuromuscular block reversal agent induced by both benzylisquinolinium and aminosteroid neuromuscular block agents by the supramolecular sequestration strategy. The UV/Vis competition titration assays suggest the high binding affinity of the CB[8] derivative toward both benzylisquinolinium-type cisatracurium besylate and aminosteroid-type rocuronium, vecuronium, and pancuronium, at the level of 107 M-1. In vivo studies demonstrate that the administration of the CB[8] derivative could significantly accelerate the recovery time compared to the placebo or neostigmine groups. The reversal activity of the CB[8] derivative is comparable to or higher than that of clinically approved sugammadex. Acute toxicity evaluations reveal that the CB[8]-derivative displays outstanding biocompatibility, with the maximum tolerance dose as high as 960 mg kg-1.

Polyamide Covalent Organic Framework Membranes for Molecular Sieving.

Polyamide is an important class of membrane materials for separation technology. The polyamide membranes currently used are amorphous, and thus, their pore structures are disordered, which inevitably decreases their performance in separation. Herein, we report a new type of polyamide membranes which are fabricated from amide-linked covalent organic frameworks (COFs), a class of crystalline porous polymers with well-ordered pore structures. Thanks to the structural advantages of amide-linked COFs, the polyamide COF membranes not only exhibit high permeability (482.3 L m-2 h-1 bar-1 to water) and high rejection rate to organic dyes (>99% for methylene blue) but also display excellent stability under a harsh environment. The vantage of the polyamide COF membranes is also manifested by the comparison of their mechanical property, stability, and separation performance with that of the membranes fabricated from the COFs having the same building blocks but linked with imine and amine linkages. This work demonstrates that amide-linked COFs, which combine the structural features of COFs and polyamide, could be a new type of advanced materials for the fabrication of high-performance separation membranes.

Porous Polymers as Universal Reversal Agents for Heparin Anticoagulants through an Inclusion-Sequestration Mechanism.

Heparins are widely used anticoagulants for surgical procedures and extracorporeal therapies. However, all of them have bleeding risks. Protamine sulfate, the only clinically approved antidote for unfractionated heparin (UFH), has adverse effects. Moreover, protamine can only partially neutralize low-molecular-weight heparins (LMWHs) and is not effective for fondaparinux. Here, an inclusion-sequestration strategy for efficient neutralization of heparin anticoagulants by cationic porous supramolecular organic frameworks (SOFs) and porous organic polymers (POPs) is reported. Isothermal titration calorimetric and fluorescence experiments show strong binding affinities of these porous polymers toward heparins, whereas dynamic light scattering and zeta potential analysis confirm that the heparin sequences are adsorbed into the interior of the porous hosts. Activated partial thromboplastin time, anti-FXa, and thromboelastography assays indicate that their neutralization efficacies are higher than or as high as that of protamine for UFH and generally superior to protamine for LMWHs and fondaparinux, which is further confirmed by tail-transection model in mice and ex vivo aPTT or anti-FXa analysis in rats. Acute toxicity evaluations reveal that one of the SOFs displays outstanding biocompatibility. This work suggests that porous polymers can supply safe and rapid reversal of clinically used heparins, as protamine surrogates, providing an improved approach for their neutralization.

Toward azo-linked covalent organic frameworks by developing linkage chemistry via linker exchange.

Exploring new linkage chemistry for covalent organic frameworks (COFs) provides a strong driving force to promote the development of this emerging class of crystalline porous organic materials. Herein we report a strategy to synthesize COFs with azo linkage, one of the most important functional unit in materials science but having not yet been exploited as a linkage of COFs. This strategy is developed on the basis of in situ linker exchange, by which imine-linked COFs are completely transformed into azo-linked COFs (Azo-COFs). Moreover, distinct properties of Azo-COFs from their corresponding imine-linked precursors are observed, indicating unique property of Azo-COFs. This strategy provides a useful approach to develop new linkage chemistry for COFs. It also has established a synthetic method for azo-linked COFs, which not only enriches the family of COFs but also offers a platform to explore properties and applications of this class of crystalline porous conjugated polymers.

A facile and scalable synthetic method for covalent organic nanosheets: ultrasonic polycondensation and photocatalytic degradation of organic pollutants.

Covalent organic framework nanosheets (COF NSs or CONs), as compared to their bulk counterparts two-dimensional (2D) covalent organic frameworks (COFs), exhibit superior performance in many aspects due to their fully accessible active sites benefiting from their ultrathin porous 2D structures. The development of a scalable synthetic methodology for CONs is crucial to further exploration of their unique properties and practical applications. Herein, we report an efficient strategy to fabricate ultrathin CONs through direct polycondensation of monomers under ultrasonic treatment and mild conditions. This method is facile and scalable, which is demonstrated by gram-scale synthesis of two ultrathin 2D CONs in several hours. Moreover, the as-prepared ultrathin CONs show excellent heterogeneous photocatalytic performance for the degradation of organic pollutants (dyes as representatives), remarkably superior to the bulk COFs prepared from the corresponding monomers under solvothermal conditions. This research provides a new roadmap for the scalable and facile synthesis of ultrathin CONs, which is of paramount importance for fully exploring the tremendous potential of this emerging type of 2D material.

A Facile, Efficient, and General Synthetic Method to Amide-Linked Covalent Organic Frameworks.

Amide-linked covalent organic frameworks (amide COFs) possess enormous potentials in practical applications benefiting from their high stability and polyamide structures. However, they suffer from very limited accessibility. Herein, we report a new linkage conversion method to rapidly synthesize crystalline amide COFs through oxidation of imine linkages in their corresponding imine-linked frameworks with KHSO5 as an oxidant under very mild conditions. This synthetic strategy is general, facile, efficient, and scalable, as demonstrated by the procedure of simply stirring mixtures of imine-linked COFs (seven examples) and KHSO5 in anhydrous dimethylformamide for several hours to complete the conversions and gram-scale synthesis. The high efficiency of this approach enables facile production of amide COFs from widely available imine-linked COFs, which lays the foundation for exploring practical applications of this unique type of polyamide material.

Self-Assembly of a Bilayer 2D Supramolecular Organic Framework in Water.

Accurate control of the layer number of orderly stacked 2D polymers has been an unsettled challenge in self-assembly. Herein we describe the fabrication of a bilayer 2D supramolecular organic framework from a monolayer 2D supramolecular organic framework in water by utilizing the cooperative coordination of a rod-like bipyridine ligands to zinc porphyrin subunits of the monolayer network. The monolayer supramolecular framework is prepared from the co-assembly of an octacationic zinc porphyrin monomer and cucurbit[8]uril (CB[8]) in water through CB[8]-encapsulation-promoted dimerization of 4-phenylpyridiunium subunits that the zinc porphyrin monomer bear. The bilayer 2D supramolecular organic framework exhibits structural regularity in both solution and the solid state, which is characterized by synchrotron small-angle X-ray scattering and high-resolution transmission electron microscopic techniques. Atomic force microscopic imaging confirms that the bilayer character of the 2D supramolecular organic framework can be realized selectively on the micrometer scale.

Transformation between 2D covalent organic frameworks with distinct pore hierarchy via exchange of building blocks with different symmetries.

Transformation between 2D covalent organic frameworks (COFs) via exchange of molecular building blocks with different symmetries has been realized, which gives rise to the conversion between 2D COFs with distinct pore hierarchy. This type of monomer replacement has expanded the scope of the building-unit-exchange-based COF-to-COF transformation strategy.

A Covalent Organic Framework with Extended π-Conjugated Building Units as a Highly Efficient Recipient for Lithium-Sulfur Batteries.

Lithium-sulfur (Li-S) batteries have recently become a research hotspot because of their tempting theoretical capacity and energy density. Nevertheless, the notorious shuttle of polysulfides hinders the advancement of Li-S batteries. Herein, a two-dimensional covalent organic framework (COF) with extended π-conjugated units has been designed, synthesized, and used as sulfur recipients with 88.4 wt % in loading. The COF offers an elaborate platform for sufficient Li-S redox reactions with almost theoretical capacity release (1617 mA h g-1 at 0.1 C), satisfactory rate capability, and intensively traps polysulfides for a decent Coulombic efficiency (ca. 98.0%) and extremely low capacity decay (0.077% per cycle after 528 cycles at 0.5 C). The structural factors of the COF on the high-performance batteries are revealed by density functional theory calculations to be the high degrees of conjugation and proper interlayer space. This work not only demonstrates the great potential of COFs as highly efficient sulfur recipients but also provides a viable guidance for further design of COF materials to tackle shuttling issues toward active materials in electrochemical energy storage.