Structural characteristics of amygdala subregions in type 2 diabetes mellitus.

Type 2 diabetes mellitus (T2DM) patients often suffer from depressive symptoms, which seriously affect cooperation in treatment and nursing. The amygdala plays a significant role in depression. This study aims to explore the microstructural alterations of the amygdala in T2DM and to investigate the relationship between the alterations and depressive symptoms. Fifty T2DM and 50 healthy controls were included. Firstly, the volumes of subcortical regions and subregions of amygdala were calculated by FreeSurfer. Covariance analysis (ANCOVA) was conducted between the two groups with covariates of age, sex, and estimated total intracranial volume to explore the differences in volume of subcortical regions and subregions of amygdala. Furthermore, the structural covariance within the amygdala subregions was performed. Moreover, we investigate the correlation between depressive symptoms and the volume of subcortical regions and amygdala subregions in T2DM. We observed a reduction in the volume of the bilateral cortico-amygdaloid transition area, left basal nucleus, bilateral accessory basal nucleus, left anterior amygdaloid area of amygdala, the left thalamus and left hippocampus in T2DM. T2DM patients showed decreased structural covariance connectivity between left paralaminar nucleus and the right central nucleus. Moreover, there was a negative correlation between self-rating depression scale scores and the volume of the bilateral cortico-amygdaloid transition area in T2DM. This study reveals extensive structural alterations in the amygdala subregions of T2DM patients. The reduction in the volume of the bilateral cortico-amygdaloid transition area may be a promising imaging marker for early recognition of depressive symptoms in T2DM.

3D Printing of Bi2Te3-Based Thermoelectric Materials with High Performance and Shape Controllability.

Thermoelectric (TE) energy conversion technology provides a promising way to improve the efficiency of fossil energy by generating electricity from low-grade waste heat. With regard to these applications, thermoelectric generators (TEGs) should be designed from system integration perspectives to simultaneously improve heat transfer efficiency and system simplification as well as the robust mechanical properties. However, typical TEGs fabricated by conventional methods barely accomplish such requirements. Herein, high-quality TEGs were assembled by combining the well-flowable spherical bismuth telluride (BT) powdered precursors and selective laser melting (SLM) technology. By optimizing the electronic and phonon transport properties through defect engineering driven by 3D printing, a high figure of merit was accomplished for 1.27 (p-type) and 1.13 (n-type) in BT. This achievement is primarily attributed to the nonequilibrium solidification mechanism, which leads to the formation of multiscale defects during the 3D printing process. The introduction of these multiscale defects enables the effective scattering of wide frequency phonons, leading to a substantial reduction in lattice thermal conductivity. Meanwhile, robust mechanical properties were obtained in the printed p-type/n-type BT TE materials parallel to the building direction (BD) with a compressive strength reaching 257/250 MPa by employing the fine grain structure and the high density of nanotwins introduced during the SLM process. A well shape-controllable and high-performance TEG was designed using 3D-printed BT half-rings, and an output power of 134 mW was achieved at a temperature gradient of 38.9 °C. Our study opens a new route for the great potential of TE materials based on standard commercial SLM 3D printing technology for low-grade waste heat emitted from structures with heterogeneous shapes.

Broad Temperature Plateau for High Thermoelectric Properties of n-Type Bi2Te2.7Se0.3 by 3D Printing-Driven Defect Engineering.

High-energy-conversion Bi2Te3-based thermoelectric generators (TEGs) are needed to ensure that the assembled material has a high value of average figure of merit (ZTave). However, the inferior ZTave of the n-type leg severely restricts the large-scale applications of Bi2Te3-based TEGs. In this study, we achieved and reported a high peak ZT (1.33) of three-dimensional (3D)-printing n-type Bi2Te2.7Se0.3. In addition, a superior ZTave of 1.23 at a temperature ranging from 300 to 500 K was achieved. The high value of ZTave was obtained by synergistically optimizing the electronic- and phonon-transport properties using the 3D-printing-driven defect engineering. The nonequilibrium solidification mechanism facilitated the multiscale defects formed during the 3D-printed process. Among the defects formed, the nanotwins triggered the energy-filtering effect, thus enhancing the Seebeck coefficient at a temperature range of 300-500 K. The effective scattering of wide-frequency phonons by multiscale defects reduced the lattice thermal conductivity close to the theoretical minimum of ∼0.35 W m-1 k-1. Given the advantages of 3D printing in freeform device shapes, we assembled and measured bionic honeycomb-shaped single-leg TEGs, exhibiting a record-high energy conversion efficiency (10.2%). This work demonstrates the great potential of defect engineering driven by selective laser melting 3D-printing technology for the rational design of advanced n-type Bi2Te2.7Se0.3 thermoelectric material.

Induced Superconducting Transition in Ultra-Thin Iron-Selenide Films by a Mg-Coating Process.

Binary Iron selenide (FeSe) thin films have been widely studied for years to unveil the high temperature superconductivity in iron-based superconductors. However, the origin of superconducting transition in this unconventional system is still under debate and worth deep investigations. In the present work, the transition from insulator to superconductor was achieved in non-superconducting FeSe ultrathin films (~8 nm) grown on calcium fluoride substrates via a simple in-situ Mg-coating by a pulsed laser deposition technique. The Mg-coated FeSe film with an optimized amount of Mg exhibited a superconducting critical temperature as 9.7 K and an upper critical field as 30.9 T. Through systematic characterizations on phase identification, carrier transport behavior and high-resolution microstructural features, the revival of superconductivity in FeSe ultrathin films is mostly attributed to the highly crystallized FeSe and extra electron doping received from external Mg-coating process. Although the top few FeSe layers are incorporated with Mg, most FeSe layers are intact and protected by a stable magnesium oxide layer. This work provides a new strategy to induce superconductivity in FeSe films with non-superconducting behavior, which might contribute to a more comprehensive understanding of iron-based superconductivity and the benefit to downstream applications such as magnetic resonance imaging, high-field magnets and electrical cables.

Realize High Thermoelectric Properties in n-Type Bi2Te2.7Se0.3/Y2O3 Nanocomposites by Constructing Heterointerfaces.

Due to the excellent thermoelectric performance, bismuth telluride (Bi2Te3) compounds are highly promising for the thermoelectric conversion in the room temperature range. However, the inferior thermoelectric performance of the n-type leg severely restricts the applications of Bi2Te3-based thermoelectric couples. Herein, n-type Bi2Te2.7Se0.3 (BTS)-based thermoelectric materials incorporated with nanosized Y2O3 (0.5-3 wt %) are prepared and their thermoelectric properties are systematically studied. The dramatically improved thermoelectric performance is ascribed to the realization of a multiscale feature of Y2O3 nanoparticle (NP)-induced interfacial decorations distributed along grain boundaries, which creates massive BTS/Y2O3 interfaces for the manipulation of carrier and phonon transport properties. The geometric phase analysis is employed to further confirm the condition of local strain in the BTS composite incorporated with Y2O3 NPs. Due to the presence of heterointerfaces and high density of dislocations in BTS matrices, the minimum lattice thermal conductivity (κl) of the nanocomposites (NCs) is dramatically suppressed from 0.76 to 0.37 W m-1 K-1. With the incorporation of 3 wt % Y2O3 NPs, the Vickers hardness of the BTS/Y2O3 NC is increased by about 32%. Overall, the BTS + 1.5 wt % Y2O3 NC maintains excellent thermoelectric properties (ZTave = 1.1) in the whole operative temperature range (300-500 K). The present strategy of implementing high-density heterogeneous interfaces by Y2O3 NP addition offers an applicable pathway for fabricating high-performance thermoelectric materials with both optimized thermoelectric properties and mechanical properties.

Successive Passage In Vitro Led to Lower Virulence and Higher Titer of A Variant Porcine Epidemic Diarrhea Virus.

A highly virulent porcine epidemic diarrhea virus (PEDV) appeared in China and spread rapidly to neighbor countries, which have led to great economic losses to the pig industry. In the present study, we isolated a PEDV using Vero cells and serially propagated 100 passages. PEDV SDSX16 was characterized in vitro and in vivo. The viral titers increased to 107.6 TCID50/mL (100th) by serial passages. The spike (S) gene and the whole gene of the SDSX16 virus was fully sequenced to assess the genetic stability and relatedness to previously identified PEDV. Along with successive passage in vitro, there were 18 nucleotides (nt) deletion occurred in the spike (S) gene resulting in a deletion of six amino acids when the SDSX16 strain was passaged to the 64th generation, and this deletion was stable until the P100. However, the ORF1a/b, M, N, E, and ORF3 genes had only a few point mutations in amino acids and no deletions. According to growth kinetics experiments, the SDSX16 deletion strain significantly enhanced its replication in Vero cells since it was passaged to the 64th generation. The animal studies showed that PEDV SDSX16-P10 caused more severe diarrhea and vomiting, fecal shedding, and acute atrophic enteritis than SDSX16-P75, indicating that SDSX16-P10 is enteropathogenic in the natural host, and the pathogenicity of SDSX16 decreased with successive passage in vitro. However, SDSX16-P10 was found to cause lower levels of cytokine expression than SDSX16-P75 using real-time PCR and flow cytometry, such as IL1ß, IL6, IFN-ß, TNF-α, indicating that SDSX16-P10 might inhibit the expression of cytokines. Our data indicated that successive passage in vitro resulted in virulent attenuation in vivo of the PEDV variant strain SDSX16.

Simultaneous detection of classical PRRSV, highly pathogenic PRRSV and NADC30-like PRRSV by TaqMan probe real-time PCR.

Porcine Reproductive and Respiratory Syndrome (PRRS), an acute infectious disease caused by the porcine reproductive and respiratory syndrome virus (PRRSV), is one of the most devastating diseases affecting the global swine industry. In order to establish a multiplex real-time PCR method for the simultaneous detection of the classical PRRSV (C-PRRSV) strain, the highly pathogenic PRRSV (HP-PRRSV) strain and NADC30-like PRRSV (NL-PRRSV) strain, we designed specific primers and TaqMan fluorescent probes based on the Nsp2 target gene sequence of these three different PRRSV strains, and designed American-type PRRSV (PRRSV-U) special primers and probes based on the relatively conserved target gene sequence of ORF7. The method established in this study can quickly and accurately detect and differentiate three types of strains of clinical tissue samples, respectively. This method plays a key role in the rapid diagnosis and determination of PRRSV.

Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operation.

Superconducting joints are essential for persistent-mode operation in a superconducting magnet system to produce an ultra-stable magnetic field. Herein, we report rationally designed niobium-titanium (Nb-Ti) superconducting joints and their evaluation results in detail. For practical applications, superconducting joints were fabricated by using a solder matrix replacement method with two types of lead-bismuth (Pb-Bi) solder, including Pb42Bi58 as a new composition. All the joints attained a critical current of >200 A below 1.43 T at 4.2 K. Our optimized superconducting joining method was tested in a closed-loop coil, obtaining a total circuit resistance of 3.25 × 10-14 Ω at 4.2 K in self-field. Finally, persistent-mode operation was demonstrated in an Nb-Ti solenoid coil with a persistent-current switch. This work will pave the way to developing high-performance Nb-Ti superconducting joints for practical applications.

Porcine reproductive and respiratory syndrome virus NADC30-like strain accelerates Streptococcus suis serotype 2 infection in vivo and in vitro.

Porcine reproductive and respiratory syndrome (PRRS), an economically significant pandemic disease, commonly results in increased impact of bacterial infections, including those by Streptococcus suis (S. suis). In recent years, PRRS virus (PRRSV) NADC30-like strain has emerged in different regions of China, and coinfected with S. suis and PRRSV has also gradually increased in clinical performance. However, the mechanisms involved in host innate responses towards S. suis and their implications of coinfection with NADC30-like strain remain unknown. Therefore, the pathogenicity of NADC30-like strain and S. suis serotype 2 (SS2) coinfection in vivo and in vitro was investigated in this study. The results showed that NADC30-like increased the invasion and proliferation of SS2 in blood and tissues, resulting in more severe pneumonia, myocarditis, and peritonitisas well as higher mortality rate in pigs. In vitro, NADC30-like strain increased the invasion and survival of SS2 in porcine alveolar macrophages (PAM) cells, causing more drastic expression of inflammatory cytokines and activation of NF-ĸB signalling. These results pave the way for understanding the interaction of S. suis with the swine immune system and their modulation in a viral coinfection.

Evaluation of residual stress and texture in isotope based Mg11B2 superconductor using neutron diffraction.

Magnesium diboride (MgB2) superconducting wires have demonstrated commercial potential to replace niobium-titanium (NbTi) in terms of comparable critical current density. Its higher critical temperature makes MgB2 wire suitable for liquid-helium-free operation. We recently reported boron-11 isotope-based low-activation Mg11B2 superconducting wire with decent critical current density appropriate for low-cost superconducting fusion magnets. In this study, we have mainly focused on the neutron diffraction technique to measure the residual stress in Mg11B2 superconducting wire for the first time. The residual stress state was given qualitative and quantitative interpretation in terms of micro- and macrostress generation mechanisms based on the isotropic model confirmed by neutron texture measurements. The relationship between the stress/strain state in the wire and the transport critical current density is also discussed. This investigation could pave the way to further enhancement of the critical current density of low-activation Mg11B2 superconducting wires suitable for next-generation fusion grade magnets.

Readily Exfoliated TiSe2 Nanosheets for High-Performance Sodium Storage.

Materials with sheet-like morphologies are highly desirable candidates for energy storage and conversion applications, due to the confined atomic thickness and high surface area, which would largely improve the electrochemical reaction kinetics. In this work, the sodium storage performance of TiSe2 nanosheets and corresponding sodiation/desodiation reaction mechanism are studied for the first time. TiSe2 nanosheets are readily exfoliated from bulk TiSe2 after quick ultrasonication or grinding. The TiSe2 nanosheets exhibit a reversible capacity of 147 mAh g-1 at 0.1 A g-1 , and show excellent rate capability with a capacity of 103 mAh g-1 at an ultra-high current density of 10.0 A g-1 . The combined in situ XRD and ex-situ HRTEM results suggest that sodium storage in TiSe2 is achieved through a multi-step intercalation/deintercalation mechanism. Besides, TiSe2 might be a promising 2D nanomaterial platform for other energy and electronic applications due to its easy exfoliation and unique physicochemical properties.

The Interface Structure of FeSe Thin Film on CaF2 Substrate and its Influence on the Superconducting Performance.

The investigations into the interfaces in iron selenide (FeSe) thin films on various substrates have manifested the great potential of showing high-temperature-superconductivity in this unique system. In present work, we obtain FeSe thin films with a series of thicknesses on calcium fluoride (CaF2) (100) substrates and glean the detailed information from the FeSe/CaF2 interface by using scanning transmission electron microscopy (STEM). Intriguingly, we have found the universal existence of a calcium selenide (CaSe) interlayer with a thickness of approximate 3 nm between FeSe and CaF2 in all the samples, which is irrelevant to the thickness of FeSe layers. A slight Se deficiency occurs in the FeSe layer due to the formation of CaSe interlayer. This Se deficiency is generally negligible except for the case of the ultrathin FeSe film (8 nm in thickness), in which the stoichiometric deviation from FeSe is big enough to suppress the superconductivity. Meanwhile, in the overly thick FeSe layer (160 nm in thickness), vast precipitates are found and recognized as Fe-rich phases, which brings about degradation in superconductivity. Consequently, the thickness dependence of superconducting transition temperature (Tc) of FeSe thin films is investigated and one of our atmosphere-stable FeSe thin film (127 nm) possesses the highest Tconset/Tczero as 15.1 K/13.4 K on record to date in the class of FeSe thin film with practical thickness. Our results provide a new perspective for exploring the mechanism of superconductivity in FeSe thin film via high-resolution STEM. Moreover, approaches that might improve the quality of FeSe/CaF2 interfaces are also proposed for further enhancing the superconducting performance in this system.

Solid cryogen: a cooling system for future MgB2 MRI magnet.

An efficient cooling system and the superconducting magnet are essential components of magnetic resonance imaging (MRI) technology. Herein, we report a solid nitrogen (SN2) cooling system as a valuable cryogenic feature, which is targeted for easy usability and stable operation under unreliable power source conditions, in conjunction with a magnesium diboride (MgB2) superconducting magnet. The rationally designed MgB2/SN2 cooling system was first considered by conducting a finite element analysis simulation, and then a demonstrator coil was empirically tested under the same conditions. In the SN2 cooling system design, a wide temperature distribution on the SN2 chamber was observed due to the low thermal conductivity of the stainless steel components. To overcome this temperature distribution, a copper flange was introduced to enhance the temperature uniformity of the SN2 chamber. In the coil testing, an operating current as high as 200 A was applied at 28 K (below the critical current) without any operating or thermal issues. This work was performed to further the development of SN2 cooled MgB2 superconducting coils for MRI applications.

Improvement in the transport critical current density and microstructure of isotopic Mg11B2 monofilament wires by optimizing the sintering temperature.

Superconducting wires are widely used in fabricating magnetic coils in fusion reactors. In consideration of the stability of 11B against neutron irradiation and lower induced radio-activation properties, MgB2 superconductor with 11B serving as boron source is an alternative candidate to be used in fusion reactor with severe irradiation environment. In present work, a batch of monofilament isotopic Mg11B2 wires with amorphous 11B powder as precursor were fabricated using powder-in-tube (PIT) process at different sintering temperature, and the evolution of their microstructure and corresponding superconducting properties was systemically investigated. Accordingly, the best transport critical current density (Jc) = 2 × 104 A/cm2 was obtained at 4.2 K and 5 T, which is even comparable to multi-filament Mg11B2 isotope wires reported in other work. Surprisingly, transport Jc vanished in our wire which was heat-treated at excessively high temperature (800 °C). Combined with microstructure observation, it was found that lots of big interconnected microcracks and voids that can isolate the MgB2 grains formed in this whole sample, resulting in significant deterioration in inter-grain connectivity. The results can be a constructive guide in fabricating Mg11B2 wires to be used as magnet coils in fusion reactor systems such as ITER-type tokamak magnet.

Tuning Superconductivity in FeSe Thin Films via Magnesium Doping.

In contrast to its bulk crystal, the FeSe thin film or layer exhibits better superconductivity performance, which recently attracted much interest in its fundamental research as well as in potential applications around the world. In the present work, tuning superconductivity in FeSe thin films was achieved by magnesium-doping technique. Tc is significantly enhanced from 10.7 K in pure FeSe films to 13.4 K in optimized Mg-doped ones, which is approximately 1.5 times higher than that of bulk crystals. This is the first time achieving the enhancement of superconducting transition temperature in FeSe thin films with practical thickness (120 nm) via a simple Mg-doping process. Moreover, these Mg-doped FeSe films are quite stable in atmosphere with Hc2 up to 32.7 T and Tc(zero) up to 12 K, respectively, implying their outstanding potential for practical applications in high magnetic fields. It was found that Mg enters the matrix of FeSe lattice, and does not react with FeSe forming any other secondary phase. Actually, Mg first occupies Fe-vacancies, and then substitutes for some Fe in the FeSe crystal lattices when Fe-vacancies are fully filled. Simultaneously, external Mg-doping introduces sufficient electron doping and induces the variation of electron carrier concentration according to Hall coefficient measurements. This is responsible for the evolution of superconducting performance in FeSe thin films. Our results provide a new strategy to improve the superconductivity of 11 type Fe-based superconductors and will help us to understand the intrinsic mechanism of this unconventional superconducting system.