RESUMEN
Cumulus expansion is an important indicator of oocyte maturation and has been suggested to be indicative of greater oocyte developmental capacity. Although multiple methods have been described to assess cumulus expansion, none of them is considered a gold standard. Additionally, these methods are subjective and time-consuming. In this manuscript, the reliability of three cumulus expansion measurement methods was assessed, and a deep learning model was created to automatically perform the measurement. Cumulus expansion of 232 cumulus-oocyte complexes was evaluated by three independent observers using three methods: (1) measurement of the cumulus area, (2) measurement of three distances between the zona pellucida and outer cumulus, and (3) scoring cumulus expansion on a 5-point Likert scale. The reliability of the methods was calculated in terms of intraclass-correlation coefficients (ICC) for both inter- and intra-observer agreements. The area method resulted in the best overall inter-observer agreement with an ICC of 0.89 versus 0.54 and 0.30 for the 3-distance and scoring methods, respectively. Therefore, the area method served as the base to create a deep learning model, AI-xpansion, which reaches a human-level performance in terms of average rank, bias and variance. To evaluate the accuracy of the methods, the results of cumulus expansion calculations were linked to embryonic development. Cumulus expansion had increased significantly in oocytes that achieved successful embryo development when measured by AI-xpansion, the area- or 3-distance method, while this was not the case for the scoring method. Measuring the area is the most reliable method to manually evaluate cumulus expansion, whilst deep learning automatically performs the calculation with human-level precision and high accuracy and could therefore be a valuable prospective tool for embryologists.
Asunto(s)
Aprendizaje Profundo , Femenino , Humanos , Animales , Bovinos , Reproducibilidad de los Resultados , Células del Cúmulo , Oocitos , Desarrollo EmbrionarioRESUMEN
The success rate of bovine in vitro embryo reproduction is low and highly dependent on the oocyte quality. The selection of the oocyte to be fertilized is done by the embryologists' visual examination of oocytes. It is time-consuming, subjective, and inconsistent between specialists in the area. In this paper, a semi-automatic solution is proposed to score the quality of an immature oocyte. It consists of a deep learning model to classify oocyte competence. The model was trained and tested with real data, composed of images of immature oocytes and their label of whether they developed into blastocysts after fertilization. To the best of our knowledge, automated bovine oocyte classification was not attempted before, but experimental results show that our proposed solution is more robust and objective than specialists' visual assessment and comparable with other works on human oocytes.Clinical relevance- This establishes a semi-automatic real-time method to score bovine immature oocytes, based on stereo-microscopy images. Our method will significantly reduce the time of in vitro embryo production and its success.
Asunto(s)
Aprendizaje Profundo , Técnicas de Maduración In Vitro de los Oocitos , Animales , Bovinos , Humanos , Técnicas de Maduración In Vitro de los Oocitos/métodos , Microscopía , Oocitos , BlastocistoRESUMEN
While human in vitro embryo production is generally performed individually, animal models have shown that culturing embryos in groups improves blastocyst yield and quality. Paracrine embryotrophins could be responsible for this improved embryo development, but their identity remains largely unknown. We hypothesize that supplementation of embryotrophic proteins to a culture medium could be the key to improve individual embryo production. In this study, proteomics screening of culture media conditioned by bovine embryos revealed cathepsin-L as being secreted by both excellent- and good-quality embryos, while being absent in the medium conditioned by poor-quality embryos. The embryotrophic role of cathepsin-L was explored in vitro, whereby bovine zygotes were cultured individually for 8 days with or without cathepsin-L. Preliminary dose-response experiments pointed out 100 ng/mL as the optimal concentration of cathepsin-L in embryo culture medium. Supplementation of cathepsin-L to individual culture systems significantly improved blastocyst development and quality in terms of blastocoel formation at day 7, and the hatching ratio and apoptotic cell ratio at day 8, compared to the control. Taken together, cathepsin-L acts as an important embryotrophin by increasing embryo quality, and regulating blastulation and hatching in bovine in vitro embryo production.
Asunto(s)
Técnicas de Cultivo de Embriones , Desarrollo Embrionario , Bovinos , Animales , Humanos , Cigoto , Blastocisto/metabolismo , Catepsinas/metabolismo , Medios de Cultivo/farmacología , Medios de Cultivo/metabolismo , Fertilización In VitroRESUMEN
INTRODUCTION: Acquiring insights into the framework design of metal-based removable partial dentures (mRPD) is a current challenge in dental education. The aim of the present study was to explore the effectiveness of a novel 3D simulation tool to teach designing mRPD by investigating the learning gain and the acceptance and motivation towards the tool of dental students. MATERIALS AND METHODS: A 3D tool based on 74 clinical scenarios was developed for teaching the design of mRPD. Fifty-three third year dental students were randomly divided into two groups, with the experimental group (n = 26) having access to the tool during 1 week while the control group (n = 27) had no access. Quantitative analysis was based on a pre- and post-test in order to evaluate the learning gain, technology acceptance and motivation towards using the tool. Moreover, qualitative data was collected by means of an interview and focus group to get additional insights into the quantitative results. RESULTS: Although the results showed a higher learning gain for students in the experimental condition, the study did not find a significant difference between both conditions based on quantitative results. However, during the focus groups, all students of the experimental group revealed that the 3D tool improved their understanding of mRPD biomechanics. Moreover, survey results revealed that students positively evaluated the perceived usefulness and ease of use of the tool and indicated to have the intention to use the tool in the future. Suggestions were made for a redesign (e.g. creating scenarios themselves) and further implementation of the tool (e.g. analysing the scenarios in pairs or small groups). CONCLUSION: First results of the evaluation of the new 3D tool for teaching the design framework of mRPD are promising. Further research based on the design-based research methodology is needed to investigate the effects of the redesign on motivation and learning gain.
Asunto(s)
Dentadura Parcial Removible , Humanos , Educación en Odontología/métodos , Aprendizaje , Estudiantes , MotivaciónRESUMEN
In order to design learning environments that foster students' research skills, one can draw on instructional design models for complex learning, such as the 4C/ID model (in: van Merriënboer and Kirschner, Ten steps to complex learning, Routledge, London, 2018). However, few attempts have been undertaken to foster students' motivation towards learning complex skills in environments based on the 4C/ID model. This study explores the effects of providing autonomy, competence and relatedness support (in Deci and Ryan, Psychol Inquiry 11(4): 227-268, https://doi.org/10.1207/S15327965PLI1104_01, 2000) in a 4C/ID based online learning environment on upper secondary school behavioral sciences students' cognitive and motivational outcomes. Students' cognitive outcomes are measured by means of a research skills test consisting of short multiple choice and short answer items (in order to assess research skills in a broad way), and a research skills task in which students are asked to integrate their skills in writing a research proposal (in order to assess research skills in an integrative manner). Students' motivational outcomes are measured by means of students' autonomous and controlled motivation, and students' amotivation. A pretest-intervention-posttest design was set up in order to compare 233 upper secondary school behavioral sciences students' outcomes among (1) a 4C/ID based online learning environment condition, and (2) an identical condition additively providing support for students' need satisfaction. Both learning environments proved equally effective in improving students' scores on the research skills test. Students in the need supportive condition scored higher on the research skills task compared to their peers in the baseline condition. Students' autonomous and controlled motivation were not affected by the intervention. Although, unexpectedly, students' amotivation increased in both conditions, students' amotivation was lower in the need supportive condition compared to students in the baseline condition. Theoretical relationships were established between students' need satisfaction, students' motivation (autonomous, controlled, and amotivation), and students' cognitive outcomes. These findings are discussed taking into account the COVID-19 affected setting in which the study took place.
RESUMEN
Due to a rapidly transforming world, design education needs to adjust itself. To do so, it is essential to understand curriculum gaps in the discipline. This systematic review (n = 95) reports on these gaps and the future readiness of design curricula. The search strategy consisted of both a database search, and discipline-specific journal search in which generalised results about current or future perspectives of design education were found. Structured around the constructive alignment framework, this research found that more 21st century learning objectives focusing on skills next to domain-specific knowledge need to be incorporated, and teaching and learning activities need to be more student-centred and better aligned to industry. Related to assessment, a considerable gap was found in literature on guidelines and means for formative assessment. Design education is not yet ready for the challenges ahead, therefore, the authors hope that design departments rethink their curricula and fill the specified gaps.
RESUMEN
Although digital personalized learning (DPL) is assumed to be beneficial for the student as well as the teacher, the implementation process of DPL tools can be challenging. Therefore, the aim of our study is to scrutinize teachers' perceptions towards the implementation of DPL in the classroom. A total of 370 teachers from primary and secondary education (students aged 6-18 years old) were questioned through an online survey. An overview of descriptive results is presented regarding (1) teachers' reported technology use, (2) their perceptions towards adaptivity and dashboards in DPL tools and (3) their expectations of support in view of implementing DPL. Based on a cluster analysis, three teacher clusters are distinguished. Results reveal all three clusters had positive perceptions towards DPL. Nevertheless, there is great variety in reported use of DPL tools.
RESUMEN
[This corrects the article DOI: 10.3389/fpsyg.2021.828027.].
RESUMEN
Industrial settings will be characterized by far-reaching production automation brought about by advancements in robotics and artificial intelligence. As a consequence, human assembly workers will need to adapt quickly to new and more complex assembly procedures, which are most likely to increase cognitive workload, or potentially induce overload. Measurement and optimization protocols need to be developed in order to be able to monitor workers' cognitive load. Previous studies have used electroencephalographic (EEG, measuring brain activity) and electrooculographic (EOG, measuring eye movements) signals, using basic computer-based static tasks and without creating an experience of overload. In this study, EEG and EOG data was collected of 46 participants performing an ecologically valid assembly task while inducing three levels of cognitive load (low, high and overload). The lower individual alpha frequency (IAF) was identified as a promising marker for discriminating between different levels of cognitive load and overload.
Asunto(s)
Inteligencia Artificial , Electroencefalografía , Cognición , Electrooculografía/métodos , Movimientos Oculares , HumanosRESUMEN
Identification of factors associated with the quality and quantity of colostrum production has always been a major challenge in cattle industry. In purebred double-muscled Belgian Blue (BB) cows, parturition is mainly performed by elective caesarean section (CS; >90%). However, the CS itself may influence colostrum production characteristics. The present study aimed to evaluate the impact of maternal and newborn calf factors and the duration of the procedure of CS on the quality and quantity of colostrum production in BB cows. The dataset includes 551 records of cow-calf pairs that were presented for an elective CS at the Ghent University veterinary clinic between 2017 and 2019. The quality (measured via a colostrum densimeter) and the quantity (measured via a standard volume scale) of colostrum were measured within 30 min after the end of the CS. Fixed effects were fitted in mixed linear regression models to test for their potential association with colostrum quality (specific gravity; SG) and quantity (liters), and generalized mixed-effects models were constructed to test the associations of fixed effects with the optimal colostrum production index (yes vs no) based on an adequate supply of both colostrum quality and quantity. The fixed effects tested were parity, the gender of the calf, birth weight, duration of CS (min), and season of birth. Our results show that parity (primiparity), duration of CS (longer CS), and calving season (summer) had a significantly negative impact on colostrum production. Concluding, both colostrum quality and quantity can be influenced by intrinsic and extrinsic factors (including duration of CS), which should be considered while feeding newborn calves delivered via CS.
Asunto(s)
Cesárea , Calostro , Animales , Bélgica , Bovinos , Cesárea/veterinaria , Femenino , Paridad , Parto , EmbarazoRESUMEN
We evaluated the effect of supplementation of different concentrations of bovine follicular fluid (FF) during in vitro maturation (IVM) on oocyte development and blastocyst quality in group and individual culture conditions. To do so, in vitro maturation medium (TCM-199 with 20 ng/mL epidermal growth factor and 50 µg/mL gentamycin) was supplemented with 0 (control), 1, 5, or 10% of FF. Follicular fluid was collected from slaughterhouse-derived ovaries, selecting follicles between 12 and 20 mm in diameter. Oocytes were either produced in groups or individually matured, fertilized, and cultured to the blastocyst stage, allowing for separate follow-up of each oocyte. Development (cleavage and blastocyst rates) among experimental groups were fitted in mixed-effects models, and blastocyst quality parameters (assessed via differential apoptotic staining) were evaluated in mixed linear regression models. We also assessed the cumulus expansion (prior and after maturation) for individual culture conditions, and their difference was fitted in mixed linear regression models. The FF was collected from two batches, with an estradiol/progesterone ratio higher than 1. The FF batch did not affect the development or blastocyst quality in group or individual culture conditions (P > 0.05). In group culture, development was similar among experimental groups (P > 0.05). Five or 10% of FF supplementation improved (P Ë 0.05) aspects of blastocyst quality such as total cell numbers (TCN), trophectoderm (TE), inner cell mass (ICM), and ICM/TCN and apoptotic cells/TCN ratio in comparison to control. In the individual culture system, 5% FF supplementation increased (P Ë 0.05) day 8 blastocyst rate (33 ± 3.4% (LSM ± SE)) in comparison to control (20 ± 2.7%) and 1% FF supplementation (19 ± 2.6%) but it was not different (P > 0.05) from 10% FF supplementation (28 ± 3.4%). Five percent of FF supplementation resulted in greater TCN, ICM, and ICM/TCN than control (P Ë 0.05). It also resulted in a greater expansion of cumulus cell investment than the other groups (P Ë 0.05), with a 3-fold increase compared to control. In conclusion, 5% of FF supplementation during IVM improved the cumulus expansion and the blastocyst development and quality in an individual culture system. However, FF supplementation during maturation in a group culture system did not increase development, but it modestly improved some embryo quality aspects when 5 or 10% of FF was added.
Asunto(s)
Desarrollo Embrionario , Líquido Folicular , Animales , Blastocisto , Bovinos , Células del Cúmulo , Femenino , Técnicas de Maduración In Vitro de los Oocitos/veterinaria , OocitosRESUMEN
Extracellular vesicles (EVs) have been isolated from follicular (FF) and ampullary oviduct fluid (AOF), using different isolation methods. However, it is not clear whether different purification methods can affect the functionality of resulting EVs. Here, we compared two methods (OptiPrep™ density gradient ultracentrifugation (ODG UC) and single-step size exclusion chromatography (SEC) (qEV IZON™ single column)) for the isolation of EVs from bovine FF and AOF. Additionally, we evaluated whether the addition of EVs derived either by ODG UC or SEC from FF or AOF during oocyte maturation would yield extra benefits for embryo developmental competence. The characterization of EVs isolated using ODG UC or SEC from FF and AOF did not show any differences in terms of EV sizes (40-400 nm) and concentrations (2.4 ± 0.2 × 1012-1.8 ± 0.2 × 1013 particles/mL). Blastocyst yield and quality was higher in groups supplemented with EVs isolated from FF and AOF by ODG UC, with higher total cell numbers and a lower apoptotic cell ratio compared with the other groups (p < 0.05). Supplementing in vitro maturation media with EVs derived by ODG UC from AOF was beneficial for bovine embryo development and quality.
Asunto(s)
Técnicas de Cultivo de Embriones , Desarrollo Embrionario/genética , Vesículas Extracelulares/metabolismo , Oogénesis/efectos de los fármacos , Animales , Blastocisto/efectos de los fármacos , Bovinos , Centrifugación por Gradiente de Densidad , Medios de Cultivo Condicionados , Femenino , Líquido Folicular/química , Líquido Folicular/metabolismo , Células Ciliadas Ampollares/química , Células Ciliadas Ampollares/metabolismo , Humanos , Oviductos/efectos de los fármacosRESUMEN
While the formulation of Mihaly Csikszentmihalyi's theory of flow, including the experience dimensions, has remained stable since its introduction in 1975, its dedicated measurement tools, research methodologies, and fields of application, have evolved considerably. Among these, education stands out as one of the most active. In recent years, researchers have examined flow in the context of other theoretical constructs such as motivation. The resulting work in the field of education has led to the development of a new model for understanding flow experience in education, specifically dedicated to adult learning. As a result of both a meticulous analysis of existing models and consideration of more recent developments, a new flow scale has thus been developed. The aim of this study is therefore twofold: to validate the new flow measurement scale dedicated to the educational environment, EduFlow-2, and to test a new theoretical model. Students taking a course (N = 6,596), some on-site and others in a MOOC, participated. Several scales were administered online at the end of the participants' course during the 2017 academic year. The factor structure of EduFlow-2 was tested using Exploratory Structural Equation Modeling. Several models were tested. The model with a second-order factor best fit the data. We tested the invariance of the flow scale measure for gender and for the type of training (MOOC/on-site). We were able to show that the flow scale is invariant of the modalities of these two variables. Results revealed good psychometric qualities for the scale, making it suitable for both on-site and distance learning. The analysis also revealed significant relationships with the classic variables of motivation, self-efficacy, learning climate, and life satisfaction. Furthermore, all four dimensions of the model were found to be adequate and consistent with the underlying theoretical arguments. In the end, this new, short flow scale and the theoretical model were demonstrated to be promising for future studies in the field of education.
RESUMEN
The substantial use of social network sites by teenagers has raised concerns about privacy and security. Previous research about behavior on social network sites was mostly based on surveys and interviews. Observational research overcomes problems inherent to this research method, for example social desirability. However, existing observational research mostly focuses on public profiles of young adults. Therefore, the current observation-study includes 1050 public and non-public Facebook-profiles of teenagers (13-18) to investigate (1) what kind of information teenagers post on their profile, (2) to what extent they protect this information using privacy-settings and (3) how much risky information they have on their profile. It was found that young people mostly post pictures, interests and some basic personal information on their profile. Some of them manage their privacy-settings as such that this information is reserved for friends' eyes only, but a lot of information is accessible on the friends-of-friends' pages. Although general risk scores are rather low, more detailed analyses show that teenagers nevertheless post a significant amount of risky information. Moreover, older teenagers and girls post more (risky) information while there are no differences in applying privacy settings. We found no differences in the Facebook behavior of teenagers enrolled in different education forms. Implications of these results are discussed.