RESUMEN
BACKGROUND: Early blight (EB) of Tomatoes, caused by Alternaria solani, is a serious fungal disease that adversely affects tomato production. Infection is characterized by dark lesions on leaves, stems, and fruits. Several agrochemicals can be used to control infection, these chemicals may disrupt environmental equilibrium. An alternative technology is needed to address this significant fungal threat. This study was designed to control the growth of EB in tomatoes caused by A. solani, using green-fabricated silver nanoparticles (Ag-NPs). RESULTS: Ag-NPs were synthesized through an environmentally friendly and cost-effective approach using leaf extract of Quercus incana Roxb. (Fagaceae). The physico-chemical characterization of the Ag-NPs was conducted through UV-visible spectroscopy, scanning electron microscopy, X-ray diffraction analysis, and Fourier transform infrared spectrometry. The Ag-NPs produced were round with a mean diameter of 27 nm. The antifungal activity of these Ag-NPs was assessed through in vitro Petri plate and in vitro leaflet assays against A. solani. The green fabricated Ag-NPs exhibited excellent antifungal activity in vitro at a concentration of 100 mg/l against A. solani, inhibiting growth by 98.27 ± 1.58% and 92.79 ± 1.33% during Petri plate and leaflet assays, respectively. CONCLUSION: In conclusion, this study suggests the practical application of green-fabricated Ag-NPs from Q. incana leaf extract against A. solani to effectively control EB disease in tomatoes.
Asunto(s)
Alternaria , Nanopartículas del Metal , Quercus , Solanum lycopersicum , Plata/química , Nanopartículas del Metal/química , Antifúngicos , Espectroscopía Infrarroja por Transformada de Fourier , Extractos Vegetales/farmacología , Extractos Vegetales/química , Difracción de Rayos X , AntibacterianosRESUMEN
The shielding effectiveness (SE) against the electromagnetic interference (EMI) of polyvinyl alcohol/multiwall carbon nanotubes (PVA/MWCNTs) composite nanofibers is characteristic of higher absorptivity of the radiation that enhances with the increasing concentration of MWCNTs content in these composites. However, by enriching the content of conductive fillers (MWCNTs), the conductivity of the composites is also stirred up. Concomitantly, the conductivity of these composites contributes toward the reflectivity of the EM radiation from them. Certain applications of the EMI shielding material require a lower level of reflectivity of the EM radiation. This study intends to see how SE of the PVA/MWCNTs composite nanofibers is affected vis-a-vis their conductivity for S-band radiation. Samples of nanofibers, with (5, 10, 15, and 20) wt % of MWCNTs loading in 10 wt % of PVA solution, were prepared through electrospinning and studied for their electrical conductivity and EMI SE. It is observed that by increasing the content of MWCNTs in PVA solution from 5 to 20 wt % the conductivity of the composites tends to increase from 21 to 866 times that of PVA, while the SE increases from 10 db to 25 db over the S-band range of frequencies.
RESUMEN
BACKGROUND: Recently, researchers are focusing on creating new tools to combat the antibiotic resistant bacteria and malignancy issues, which pose significant threats to humanity. Biosynthesized silver nanoparticles (AgNPs) are thought to be a potential solution to these issues. The biosynthesis method, known for its environmentally friendly and cost-effective characteristics, can produce small-sized AgNPs with antimicrobial and anticancer properties. In this study, AgNPs were bio-fabricated from the distilled water and methanolic extracts of Viburnum grandiflorum leaves. Physio-chemical characterization of the bio-fabricated AgNPs was conducted using UV-visible spectroscopy, scanning electron microscopy, energy dispersive X-ray, and X-ray diffraction analysis. RESULTS: AgNPs produced from the methanol extract were smaller in size (12.28 nm) compared to those from the aqueous extract (17.77 nm). The bioengineered AgNPs exhibited a circular shape with a crystalline nature. These biosynthesized AgNPs demonstrated excellent bactericidal activity against both gram-negative (Pseudomonas aeruginosa) and gram-positive (Staphylococcus aureus) bacteria. Highest antibacterial activity was observed with the methanol extract against P. aeruginosa (14.66 ± 0.74 mm). AgNPs from the methanol extract also displayed the highest antioxidant activity, with an IC50 value of 188.00 ± 2.67 µg/mL against 2,2-diphenyl-1-picrylhydrazyl (DPPH). Furthermore, AgNPs exhibited notable cytotoxic activity against Rhabdomyosarcoma cell line (RD cell) of human muscle cancer cell. The IC50 values calculated from the MTT assay were 26.28 ± 1.58 and 21.49 ± 1.44 µg/mL for AgNPs synthesized from aqueous and methanol extracts, respectively. CONCLUSION: The methanol extract of V. grandiflorum leaves demonstrates significant potential for synthesizing AgNPs with effective antibacterial, antioxidant, and anticancer actions, making them applicable in various biomedical applications.
RESUMEN
This report examines the bio-fabrication of silver nanoparticles (Ag-NPs) utilizing AgNO3 and leaf extract of Crataegus monogyna as the precursor material. In order to maximize the antibacterial efficacy against Staphylococcus aureus, Proteus mirabilis, Klebsiella pneumoniae and Pseudomonas aeruginosa, the reaction conditions for the green fabrication of Ag-NPs were optimized. A one factor at a time approach (volume concentration of extract, volume concentration of AgNO3, pH and temperature) was used to optimize the best condition, and results were assessed through UV-visible spectroscopy and particle size distribution. The results showed that 20 mL of plant extract, 80 mL of AgNO3, pH 08, 100 °C temperature were the optimum reaction conditions under which we obtained the smallest Ag-NPs (7 nm). The scanning electron microscopy and X-ray diffraction analysis confirmed the spherical and crystalline nature of Ag-NPs. The antibacterial activity assay demonstrated a high antibacterial effect of Ag-NPs against S. aureus, P. mirabilis, K. pneumoniae and P. aeruginosa, and that impact was greater with smaller-sized nanoparticles (7 nm). This study shows that leaf extract of C. monogyna is a possible medium for the green fabrication of Ag-NPs, and control over reaction factors can establish the characteristics and antibacterial effectiveness of Ag-NPs.Communicated by Ramaswamy H. Sarma.
RESUMEN
Background: Fabricating zinc oxide nanoparticles (ZnO-NPs) from plant extracts is a cost-effective, safe, and environmentally friendly alternative to established chemical procedures. This study was aimed at the environmentally friendly fabrication of ZnO-NPs from plant extract. An additional objective was to investigate the antibacterial and antioxidant activity of these biosynthesized ZnO-NPs. Methods: ZnO-NPs were fabricated using the leaf extract of Ailanthus altissima, as an eco-friendly approach. The physicochemical properties of ZnO-NPs were explored using UV-visible spectroscopy, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectrometry. The bio-fabricated ZnO-NPs were examined for bactericidal activity against pathogenic bacteria (gram-negative and gram-positive) using the agar well diffusion technique. The antioxidant efficiency of ZnO-NPs was assessed using a DPPH assay. Results: A surface Plasmon peak was recorded at 327 nm, showing the existence of ZnO-NPs in the reaction solution of plant extract and zinc sulfate hexahydrate salt. These nanoparticles were predominantly spherical and capped by different functional groups of biomolecules. Furthermore, ZnO-NPs showed a dose-dependent antibacterial and antioxidant activity. At 20 mg/mL ZnO-NPs, the maximum bactericidal potential of ZnO-NPs was reported against Staphylococcus aureus (201.2 mm). ZnO-NPs have an IC50 value of 78.23 µg/mL, indicating that they are an effective antioxidant. Conclusion: This research presents an environmentally acceptable method for producing spherical ZnO-NPs with high antibacterial and antioxidant activities. These bio-fabricated ZnO-NPs could be a good option for applications in medicine and the healthcare industry.
RESUMEN
This paper presents experimental force and buckling analysis of a compliant micro-displacement amplification mechanism fabricated using the commercially available PolyMUMPs process. The proposed mechanism proficiently amplifies displacement, at two output ends, with an optimal amplification factor of 7.2. Buckling analysis revealed that an amplification factor ranging from 2.8 to 11 may be achieved for an input displacement varying from 0.1 to 7.5 µm. Based on the analysis, the optimal value of the amplification factor is found to be 7.2 with an input displacement of 3.5 µm at the operational force of 60 µN having a buckling load factor (BLF) >1. Critical load magnitude is 187 µN having BLF = 1. Buckling occurred when loading exceeded the critical load value, having BLF <1, and the mechanism failed to produce a significant amplification factor. Static analysis showed that stresses produced are within the safe region, and the structural integrity of the mechanism is not compromised having a factor of safety of 1.4. Modal analysis predicted that the natural frequency of the desired mode is 35.47 kHz. Dynamic simulations, under 15 g dynamic load with a frequency range of 30-40 kHz, confirm the possibility of integrating the proposed mechanism with MEMS devices. Parametric optimization comprehends that length and angle are the two major geometric parameters that govern the working range, force, and amplification factor. For input displacements below 1 µm, the amplification factor is even higher, which is highly beneficial for amplifying small displacements. Static, modal, and dynamic analyses of the designed mechanism have been carried out using finite element method based commercial software IntelliSuite®. The experimental results showed that this mechanism can provide the same amplified displacement at two output points and is self-sufficient to be incorporated as an intermediate compliant mechanism for enhancing the output in the case of both static and dynamic micro-devices.
RESUMEN
In this study, time-dependent, one-dimensional modeling of a surface dielectric barrier discharge (SDBD) device, driven by a sinusoidal voltage of amplitude 1-3 kV at 20 kHz, in argon is described. An SDBD device with two Cu-stripe electrodes, covered by the quartz dielectric and with the discharge gap of 20 × 10-3 m, was assumed, and the time-dependent, one-dimensional discharge parameters were simulated versus time across the plasma gap. The plasma device simulated in the given arrangement was constructed and used for biocompatible antibacterial/antimicrobial coating of plasmonic particle aerosol and compared with the coating strategy of the DBD plasma jet. Simulation results showed discharge consists of an electrical breakdown, occurring in each half-cycle of the AC voltage with an electron density of 1.4 × 1010 cm-3 and electric field strength of 4.5 × 105 Vm-1. With SDBD, the surface coating comprises spatially distributed particles of mean size 29 (11) nm, while with argon plasma jet, the nanoparticles are aggregated in clusters that are three times larger in size. Both coatings are crystalline and exhibit plasmonic features in the visible spectral region. It is expected that the particle aerosols are collected under the ionic wind, induced by the plasma electric fields, and it is assumed that this follows the dominant charging mechanisms of ions diffusion. The cold plasma strategy is appealing in a sense; it opens new venues at the nanoscale to deal with biomedical and surgical devices in a flexible processing environment.
Asunto(s)
Materiales Biocompatibles/química , Simulación por Computador , Modelos Teóricos , Nanopartículas/química , Gases em Plasma/química , Aerosoles/análisis , Electrodos , Nanopartículas/ultraestructura , Tamaño de la Partícula , Electricidad Estática , Temperatura , Factores de TiempoRESUMEN
Antimicrobial resistance is a complex global health challenge today. Discovery and development of new natural alternates with novel targets is utmost priority. In this experiment, alternative antibiotic agents in the form of silver nanoparticles (SNPs) and Achillea millefolium L. extracts were evaluated for antibacterial and antioxidant activity. The SNPs were synthesized using aqueous, ethanol and methanol extracts of A. millefolium and were monitored by a color change and UV-vis spectroscopy. The size and shape of the nanoparticles were determined through scanning electron microscopy and phase was assessed through X-ray diffraction. The SNPs were shown to have an average diameter of 20.77, 18.53 and 14.27 nm with spherical, rectangular and cubical shapes, synthesized from aqueous, ethanol and methanol extract respectively. The response of biomolecules present in plant extract during the formation of SNPs was analyzed by Fourier transform infrared spectrometry, showing polyphenols, proteins, carboxylic acid and alcohol are involved in the formation of SNPs. The plant extracts and SNPs were then studied for their antibacterial potential against common human pathogens such as gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis) and gram-negative bacteria (Salmonella enterica, Escherichia coli, and Pseudomonas aeruginosa), displaying a very good activity against both types of bacteria. The Methanol-SNPs exhibit greater inhibition of DPPH radicals with IC50 7.03 ± 0.31 µg/mL. This green method of synthesis of SNPs would support the production of SNPs with considerably boosted antibacterial and antioxidant properties and significantly enhanced therapeutic performance.
Asunto(s)
Antibacterianos/química , Antioxidantes/química , Nanopartículas del Metal/química , Plata/química , Achillea/química , Achillea/metabolismo , Antibacterianos/síntesis química , Bacterias Gramnegativas/efectos de los fármacos , Bacterias Grampositivas/efectos de los fármacos , Tecnología Química Verde , Nanopartículas del Metal/toxicidad , Pruebas de Sensibilidad Microbiana , Tamaño de la Partícula , Extractos Vegetales/químicaRESUMEN
Plant-growth-promoting bacteria show promises in crop production; nevertheless, innovation in their stable delivery is required for practical use by farmers. Herein, the composite of poly(vinyl alcohol)/poly(vinylpyrrolidone) plasticized with glycerol and loaded with the microbial consortium ( Bacillus subtilis plus Seratia marcescens) was fabricated and engineered onto canola ( Brassica napus L.) seed via electrospinning. Scanning electron microscopy showed that the biocomposite is a one-dimensional membrane, which encapsulated microbes in a multilayered nanostructure, and their interfacial behavior between microorganism and seed is beneficial for safer farming. A universal testing machine and thermogravimetric analysis demonstrated that the biocomposite holds sufficient thermomechanical properties for stable handling and practical management. A spectroscopic study resolved the living hybrid-polymer structure of the biocomposite and proved the plasticizing role of glycerol. A swelling study supports the degradation of the biocomposite in the hydrophilic environment as a result of the leaching of the plasticizer, which is important for the sustained release of microbial cells. A shelf life study supported that the biocomposite seed coat placed a threshold level of microbes [5.675 ± 0.48 log10 colony forming units (CFU)/seed] and maintained their satisfactory viability for 15 days at room temperature. An antifungal and nutrient-solubilizing study supported that the biocomposite seed coat could provide opportunities to biocontrol diseases and improve nutrient acquisition by the plant. A pot study documents the better performance of the biocomposite seed coat on seed germination, seedling growth, leaf area, plant dry biomass, and root system. A chemical and microbial study demonstrated that the biocomposite seed coat improved the effectiveness of the bioinoculant in the root-soil interface, where they survive, flourish, and increase the nutrient pool status. In particular, this study presents advances in the fabrication of the biocomposite for encapsulation, preservation, sustained release, and efficacious use of microorganisms onto seeds for precision farming.