Synergistic activity of crocin and crocin loaded in niosomes alone and in combination with fluconazole against Candida albicans isolates: In vitro and in silico study.

INTRODUCTION: Since the drug resistance in Candida species is becoming a serious clinical challenge, novel alternative therapeutic options, particularly herbal medicine, have attracted increasing interest. This study aimed to pinpoint the potential antifungal activity of crocin (Cro), the efficacy of the niosomal formulation of Cro (NCro), and the synergistic activity of both formulations in combination with fluconazole (FLC) against susceptible and resistant C. albicans isolates. MATERIAL AND METHODS: NCro was formulated using the heating method. The in vitro antimycotic activity of Cro, NCro, and FLC was evaluated. Checkerboard and isobologram assays evaluated the interaction between both formulations of Cro and FLC. Necrotic and apoptotic effects of different agents were analyzed using the flow cytometry method. In silico study was performed to examine the interactions between Lanosterol 14 alpha-demethylase and Cro as a part of our screening compounds with antifungal properties. RESULTS: NCro exhibited high entrapment efficiency up to 99.73 ± 0.54, and the mean size at 5.224 ± 0.618 µm (mean ± SD, n = 3). Both formulations of Cro were shown to display good anticandidal activity against isolates. The synergistic effect of the NCro in combination with FLC is comparable to Cro (P-value =0.03). Apoptotic indicators confirmed that tested compounds caused cell death in isolates. The docking study indicated that Cro has interactivity with the protein residue of 14α-demethylase. CONCLUSION: The results showed a remarkable antifungal effect by NCro combined with FLC. Natural compounds, particularly nano-sized carrier systems, can act as an effective therapeutic option for further optimizing fungal infection treatment.

Fabrication and characterization of lipopeptide biosurfactant-based electrospun nanofibers for use in tissue engineering.

Nanofibers are a class of nanomaterial with specific physicochemical properties and characteristics making them quite sought after and investigated by researchers. Lipopeptide biosurfactant (LPB) formulation properties were previously established in wound healing. LPB were isolated from in vitro culture of Acinetobacter junii B6 and loaded on nanofibers formulation produced by electrospinning method with different ratios of carboxymethylcellulose (CMC), polyvinyl alcohol (PVA), and Poloxamer. Numerous experimental control tests were carried out on formulations, including physicochemical properties which were evaluated by using dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FT-IR), morphology study by scanning electron microscopy (SEM), and thermal stability. The best nanofibers formulation was obtained by the electrospinning method, with a voltage of 19.8 volts, a discharge capacity of 1cm/h, a cylindrical rotating velocity of 100rpm, and a needle interval of 7cm from the cylinder, which continued for 7hours. The formulation contained 2% (w/v) CMC, 10% (w/v) poloxamer, 9% (w/v) PVA, and 5% (w/v) LPB. This formula had desirable physicochemical properties including spreadability, stability, and uniformity with the particle size of about 590nm.

Royal Jelly Nanoparticle Alleviates Experimental Model of Breast Cancer Through Suppressing Regulatory T Cells and Upregulating TH1 Cells.

BACKGROUND: Royal jelly, a natural product from bees' hypopharyngeal glands, is commonly used in biomedicine due to its antioxidant and anti-tumor activities. The aim of this study was to compare royal jelly in free form and loaded in layered double hydroxide (LDH) nanoparticle for the treatment of breast cancer with a focus on Th1 and T regulatory parameters in an animal model. METHODS: Nanoparticles were produced using the coprecipitation method and characterized using DLS, FTIR, and SEM techniques. Forty female BALB/c mice were inoculated with 7.5 x 105 4T1 cells and treated with royal jelly in free and nanoparticle form. Clinical signs and tumor volume were assessed weekly. The effect of royal jelly products on the serum level of IFN-γ and TGF-ß was measured by ELISA. In addition, the mRNA expression of these cytokines and Th1 and regulatory T cells' transcription factors (T-bet and FoxP3) was assessed by real-time PCR in the splenocytes of tumor-bearing mice. RESULTS: The physicochemical analysis of nanoparticles confirmed the synthesis of LDH nanoparticles and loading of royal jelly into the LDH structures (RJ-LDH). Animal studies showed that royal jelly and RJ-LDH significantly reduced the size of tumor in BALB/c mice. Additionally, treatment with RJ-LDH significantly inhibited TGF-ß and increased IFN-γ production. The data also revealed that RJ-LDH inhibited the differentiation of regulatory T cells, while promoting Th1 cell differentiation via regulating their master transcription factors. CONCLUSIONS: These results indicated that royal jelly and RJ-LDH could inhibit breast cancer progression by in-hibiting regulatory T cells and expansion of Th1 cell. Furthermore, the current study demonstrated the therapeutic efficacy of royal jelly is enhanced by LDH nanoparticles; hence, RJ-LDH is significantly more efficient than Free-RJ in the treatment of breast cancer.

Preparation of Folic acid@Arsenic nanoparticles and evaluation of their antioxidant properties and cytotoxic effects.

In this study, arsenic nanoparticles containing folic acid (FA@As NPs) were synthesized by microwave irradiating a mixture of As2O3 and sodium borohydride solution in the presence of folic acid. The physicochemical characteristics of the prepared NPs were studied by UV-visible spectroscopy, transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) analyses. Antioxidant activities, hemocompatibility, and cytotoxic effects of the prepared NPs were then evaluated. The attained results showed that the hexagonal FA@As NPs have a size range between 12.8 nm and 19.5 nm. The DPPH scavenging activity of FA@As NPs was found to be significantly greater than that of As NPs at concentrations ranging from 40 µg/mL to 2560 µg/mL (p<0.05). The hemolytic test confirmed that the measured hemolysis percentage (HP) for FA@As NPs and As NPs was 0% at concentrations between 20 to160 µg/mL, and for FA@As NPs, the measured HP was not significantly higher than As NPs at concentrations higher than 320 µg/mL (p>0.05). The necessary concentration for the death of half of the cells (IC50) for MDA-MB-231, MCF-7, and HUVEC cells treated (24 h) with FA@As NPs was measured to be 19.1±1.3 µg/mL, 15.4±1.1 µg/mL, and 16.8±1.2 µg/mL, respectively. However, further investigations are necessary to clarify the mechanisms behind the biological activities of FA@As NPs.

Synthesis and physicochemical characterization of Zn-Al layered double hydroxides (LDHs) as a delivery system for amphotericin B: In vitro and in silico antileishmanial study.

Leishmaniasis as a widespread neglected vector-borne protozoan disease is a major public health concern in endemic areas due to 12 million people affected worldwide and 60,000 deaths annually. Several problems and side effects in using current chemotherapies leads to progression of new drug delivery systems against leishmaniasis. For instance, layered double hydroxides (LDHs) so-called anionic clays due to their proper characteristics, have been considered recently. In the present study, LDH nanocarriers were prepared using co-precipitation method. Then, the intercalation reactions with amphotericin B were conducted via indirect ion exchange assay. Finally, after characterization of prepared LDHs, the anti-leishmanial effects of Amp-Zn/Al-LDH nanocomposites against Leishmania major were evaluated using an in vitro and in silico model. According to results, current study demonstrated that Zn/Al-NO3 LDH nanocarriers can be used as a new promising delivery system by intercalating amphotericin B into its interlayer space for leishmaniasis treatment by eliminating the L. major parasites by remarkable immunomodulatory, antioxidant and apoptotic effects.

Chitosan-sialic acid nanoparticles of selenium: Statistical optimization of production, characterization, and assessment of cytotoxic effects against two human glioblastoma cell lines.

According to the favorable antitumor properties of selenium, this study aimed to design a novel form of selenium nanoparticles (Se NPs) functionalized with chitosan (Cs) and sialic acid to assess their antitumor effects on the human glioblastoma cell lines (T98 and A172). Se NPs were synthesized in the presence of chitosan and ascorbic acid (Vc) and the synthesis conditions were optimized using response surface methodology. Se NPs@Cs were obtained with a monoclinic structure with an average diameter of 23 nm under the optimum conditions (reaction time = 30 min, chitosan concentration = 1 % w/v, Vc/Se molar ratio = 5). To modify Se NP@Cs for glioblastoma treatment, sialic acid was used to cover the surface of the NPs. Sialic acid was successfully attached to the surface of Se NPs@Cs, and Se NPs@Cs-sialic acid were formed in the size range of 15-28 nm. Se NPs@Cs-sialic acid were stable for approximately 60 days at 4 ℃. The as-synthesized NPs exerted inhibitory effects on T98 greater than 3 T3 > A172 cells in a dose- and time-dependent manner. Additionally, sialic acid ameliorated the blood biocompatibility of Se NPs@Cs. Taken together, sialic acid improved both the stability and biological activity of Se NPs@Cs.

One-Step Preparation of Luteolin Nanoemulsion and Evaluation of its Anti-inflammatory Effect in Animal Models.

BACKGROUND: Nanoemulsions are promising drug delivery systems for topical application owing to the high transdermal penetration. OBJECTIVE: Due to the side effects of existing anti-inflammatory drugs, much attention has been paid to natural products such as flavonoids. The aim of this work was to formulate luteolin nanoemulsion (LNE) and to evaluate its anti-inflammatory effect. METHODS: LNE was prepared using the low-energy spontaneous emulsion method and characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy and dynamic light scattering (DLS). The anti-inflammatory effect of LNE was assessed in formalin and acetic acid-induced inflammation methods (Whittle test). Treatment with LNE (i.p, 4 consecutive days, 40 mg/kg) was compared with diclofenac 25 mg/kg and normal saline. In the formalin test, data were recorded at 1, 2 and 4 hours after formalin injection and in the Wittle test, the extent of Evans blue leakage in the peritoneal cavity was considered as vascular permeability. RESULTS: Formalin-induced edema decreased in the LNE group, but this reduction was not significant (p > 0.05), however, in Whittle test, both LNE and diclofenac significantly reduced Evans blue leakage compared with the group treated with acetic acid alone (p < 0.05). CONCLUSION: Our results confirm the anti-inflammatory effect of LNE and give up a new platform for the design and development of bio-based carriers for more successful drug delivery.

Astrocyte responses to postnatal erythropoietin and nano-erythropoietin treatments in a valproic acid-induced animal model of autism.

BACKGROUND: Despite ample evidence of the potential protective effects of erythropoietin (EPO) on the developing brain, no study has addressed the effects of postnatal EPO on behaviors and brain tissue of animal models of autism. In the present study, we examined the therapeutic effects of postnatal erythropoietin on stereotypic behaviors and astrocyte responses via glial fibrillary acidic protein (GFAP) and S100 calcium-binding protein B (S100B) immunohistochemistry in a valproic acid (VPA) animal model of autism. Also, we compared the effects of EPO with EPO-loaded solid lipid nanoparticles (NEPO) because the blood-brain barrier has limited permeability to EPO. METHODS: Pregnant rats received a single dose of VPA (600 mg/kg) at gestational day 12.5. EPO (2000 U/kg) and EPO-loaded solid lipid nanoparticles (NEPO1000 and 2000 U/kg) were injected intraperitoneally from postnatal days 1-5. Repetitive behaviors in male offspring were assessed by a marble burying test. The immune-staining method was performed to evaluate S100B and GFAP-positive cells in the prefrontal cortex and hippocampal CA1 region. RESULTS: VPA animal models revealed more repetitive behavior and displayed higher astrogliosis in the prefrontal cortex (PFC) and hippocampus (CA1) regions. The repetitive behaviors were ameliorated relatively in VPA groups with NEPO2000 treatment, and astrogliosis was reduced even when VPA rats were treated with a lower dosage of NEPO. CONCLUSION: Our results indicate beneficial effects of postnatal NEPO exposure in the VPA animal model of autism, which proposes it as an early treatment in infants with, or at risk of, autism.

The effects of postnatal erythropoietin and nano-erythropoietin on behavioral alterations by mediating K-Cl co-transporter 2 in the valproic acid-induced rat model of autism.

In this study, based on the excitatory/inhibitory imbalance theory of autism, the time window of GABA switch, the role of K-Cl co-transporter 2 (KCC2) in adjustment GABA switch, and brain permeability to erythropoietin (EPO), the effects of postnatal -EPO and- nano- erythropoietin (NEPO) have been evaluated in the valproic acid (VPA) rat model of autism. The VPA was administered for animal modeling of autism at gestational day (GD) 12.5 (600 mg/kg). Male offsprings were injected with EPO and NEPO in a clinically proper postnatal dosing regimen on postnatal days (PND) 1-5, and autistic-like behaviors were tested at the end of the first month. Then animals were sacrificed, and neuron morphology and KCC2 expression were examined by Nissl staining and Western blot. According to our findings, high-dose NEPO improved autism-associated phenotypes. Neuroprotective effects of EPO and NEPO have been shown in the hippocampus. Postnatal NEPO treatment reversed KCC2 expression abnormalities induced by prenatal VPA. Our results might support the role of KCC2 in ASD and the excitatory/inhibitory imbalance hypothesis. We suggested Nano- erythropoietin and other KCC2 interventions as a new approach to the early treatment and prevention of autism.

Hydroxyapatite/Glycyrrhizin/Lithium-Based Metal-Organic Framework (HA/GL/Li-MOF) Nanocomposite as Support for Immobilization of Thermomyces lanuginosus Lipase.

The hydroxyapatite/glycyrrhizin/lithium-based metal-organic framework (HA/GL/Li-MOF) nanocomposites were synthesized via the hydrothermal method in the presence of lecithin and glycyrrhizin. Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDS) were applied for characterization of the fabricated nanocomposites. The HA/GL/Li-MOF and Li-MOF nanocomposites were employed as support for immobilization of Thermomyces lanuginosus lipase (TLL). The Plackett-Burman and Box-Behnken designs were used for screening and optimizing of variables affecting the immobilization conditions, respectively. The optimum specific activity of immobilized TLL on HA/GL/Li-MOF and Li-MOF nanocomposites (41.8 ± 1.2 U/mg and 39.4 ± 3.1 U/mg, respectively) was predictably determined at support concentration of 0.5 mg/mL, glutaraldehyde concentration of 5 mM, and enzyme activity of 20 U/mg, while the specific activities of TLL@ HA/GL/Li-MOF and TLL@Li-MOF were experimentally found to be 39.5 ± 3.7 U/mg and 38.5 ± 2.3 U/mg, respectively. The stability results showed that the TLL@ HA/GL/Li-MOF has suitable stability against pH and thermal denaturation. However, the immobilized TLL on Li-MOF represented lower stability compared with that of the HA/GL/Li-MOF. The immobilized TLL on HA/GL/Li-MOF maintained near 70% of its original activity after 15 days' storage and during 5 runs of application. In addition, TLL@HA/GL/Li-MOF exhibited higher enzyme-substrate affinity (Km, 10.1 mM) compared to that of TLL@Li-MOF (Km, 23.4 mM). Therefore, these findings demonstrated the potential use of HA/GL/Li-MOF nanocomposites for enzyme immobilization.

Preparation and evaluation of crocin loaded in nanoniosomes and their effects on ischemia-reperfusion injuries in rat kidney.

As a powerful antioxidant compound, crocin can partially protect against renal ischemia/reperfusion (I/R) injuries. The encapsulation of components in niosomes (non-ionic surfactant-based vesicle) as nano-sized carrier systems has been proposed as they improve the solubility, stability, and bioavailability of drugs. Herein, the encapsulation of crocin in nano-niosomes and the effects of crocin-loaded nano-niosomes on renal ischemia/reperfusion-induced damages were evaluated. Nano-niosomes containing crocin were formulated by a modified heating method and were characterized for their physicochemical characteristics. Ischemia was induced by clamping the renal artery for 30 min followed by 1 or 24 h of reperfusion. Rats received an intra-arterial injection of nano-niosome-loaded crocin at the outset of reperfusion. Blood samples were taken after reperfusion to measure urea, creatinine (Cr), malondialdehyde (MDA), and superoxide dismutase (SOD) activity. The right kidney was removed for histological examination. The results showed that crocin-contain nano-niosomes have appropriate size and morphology, acceptable encapsulation efficiency, and a proper release pattern of crocin. I/R enhanced creatinine (Cr), urea, and malondialdehyde (MDA) serum levels and reduced SOD activity and histological damages in the renal tissue.

Intramedullary nail holes laser indicator, a non-invasive technique for interlocking of intramedullary nails.

Interlocking of intramedullary nails is a challenging procedure in orthopedic trauma surgery. Numerous methods have been described to facilitate this process. But they are exposed patient and surgical team to X-rays or involves trial and error. An accurate and non-invasive method has been provided to easily interlocking intramedullary nails. By transferring a safe visible light inside the nail, a drilling position appears which use to drilling bone toward the nail hole. The wavelength of this light was obtained from ex-vivo spectroscopy on biological tissues which has optimal transmission, reflectance, and absorption properties. Moreover, animal and human experiments were performed to evaluate performance of the proposed system. Ex-vivo performance experiments were performed successfully on two groups of cow and sheep samples. Output parameters were procedure time and drilling quality which there were significant differences between the two groups in procedure time (P < 0.05). But no significant differences were observed in drilling quality (P > 0.05). Moreover, an In-vivo performance experiment was performed successfully on a middle-aged man. To compare the provided method, targeting-arm, and free-hand techniques, two human experiments were performed on a middle-aged and a young man. The results indicate the advantage of the proposed technique in the procedure time (P < 0.05), while the drilling quality is equal to the free-hand technique (P = 0.05). Intramedullary nail holes laser indicator is a safe and accurate method that reduced surgical time and simplifies the process. This new technology makes it easier to interlocking the intramedullary nail which can have good clinical applications.

Eco-friendly synthesis of the Li/Al in nonionic surfactant-based vesicles (niosomes) modified with graphene oxide quantum dot nanostructures for controlled released of chlorpheniramine maleate.

The aim of the present work was the preparation of Li/Al nanoparticles (NPs) functionalized with graphene oxide quantum dots (GOQDs) for the controlled release of chlorpheniramine maleate (CPAM). The role of lemon and egg white extracts as oxidation agents were investigated for the morphology and particle size of the products. GOQDs were synthesized using green, environmentally friendly, and cost-effective precursors. This work demonstrates that Li/Al NPs functionalized with graphene oxide as a nanolayer structure can be used as efficient nanocarriers for loading and delivery of CPAM as water-insoluble aromatic drugs The final products were identified with X-ray diffraction, scanning electron microscopy, atomic force microscopy, ultraviolet-visible spectroscopy, dynamic light scattering, thermogravimetric analysis, and transmission electron microscopy nitrogen adsorption [i.e. Brunauer-Emmett-Teller (BET) surface area analysis] techniques. The calibration curve for Li/Al nanoparticles functionalized with GOQDs for controlled released of CPAM was calculated as y = 0.0137x + 0.0103 with R2  = 0.9995. The data found through BET and Barrett-Joyner-Halenda analysis using the adsorption/desorption isotherm method demonstrated by total pore volumes and dead volume were calculated respectively as 0.162 nm2 , 0.0439 cm3 g-1 . The mean pore diameter was calculated as 20.33 nm using BET isotherm data.

Controlled and cellulose eco-friendly synthesis and characterization of Bi2O2CO3 quantum dot nanostructures (QDNSs) and drug delivery study.

This work aimed to prepare solvent-free or green Bi2O2CO3 for quantum dot nanostructures (QDNSs) based on cellulose as a stabilizer and green capping agent to sorafenib delivery for liver targeting. Because the walnut tree is one of the most abundant trees in Iran, it was tried to synthesize Bi2O2CO3 QDNSs using a walnut skin extract. The saturation magnetization for Bi2O2CO3 QDNSs was calculated to be 68.1. Also, the size of products was measured at around 60-80 nm with the Debye-Scherrer equation. Moreover, the morphology, functional groups, and crystallography of the Bi2O2CO3 nanoparticles were investigated using atomic force microscopy, scanning electron microscopy, vibrating-sample magnetometer, and Uv-vis spectroscopy. The results demonstrated that Bi2O2CO3 QDNSs have opto-magnetic properties and they can be suggested as the candidate materials for the sorafenib delivery on the liver tissue. The optical band gap estimated for Bi2O2CO3 QDNSs was found to be red-shift from 3.22 eV. This study suggests the preparation of the Bi2O2CO3 QDNSs based on cellulose as new opto-magnetic materials at different temperatures of 180 °C, 200 °C, 220 °C, and 240 °C for sorafenib delivery as a type of biological therapy drug.

Preparation of PLA/chitosan nanoscaffolds containing cod liver oil and experimental diabetic wound healing in male rats study.

Diabetes mellitus is one of the most common metabolic disorders. One of the important metabolic complications in diabetes is diabetic foot ulcer syndrome, which causes delayed and abnormal healing of the wound. The formulation of nanoscaffolds containing cod liver oil by altering the hemodynamic balance toward the vasodilators state, increasing wound blood supply, and altering plasma membrane properties, namely altering the membrane phospholipids composition, can be effective in wound healing. In this study, electrospinning method was used to produce poly lactic acid/chitosan nanoscaffolds as a suitable bio-substitute. After preparing the nanoscaffolds, the products were characterized with dynamic light scattering (DLS), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Also optical properties of polymer and comparison between adsorption between single polymer and polymer-drug calculated with UV-Vis spectra. The structure and functional groups of the final products were characterized by Fourier-transform infrared spectroscopy (FT-IR) and energy dispersive spectroscopy (EDAX) as elemental analysis. The results showed that the optimum formulation of cod liver oil was 30%, which formed a very thin fiber that rapidly absorbed to the wound and produced significant healing effects. According to the results, poly lactic acid/chitosan nanoscaffolds containing cod liver oil can be a suitable bio-product to be used in treating the diabetic foot ulcer syndrome.

A facile one-step preparation of Ca10(PO4)6(OH)2/Li-BioMOFs resin nanocomposites with Glycyrrhiza glabra (licorice) root juice as green capping agent and mechanical properties study.

The Ca10(PO4)6(OH)2/Li-BioMOFs resin nanocomposites were prepared and introduced as a new dental resin nanocomposite. Ca10(PO4)6(OH)2/Li-BioMOFs resin nanocomposites were synthesized with individual mechanical properties in the presence of lecithin as a biostabilizer. The hydrothermal synthesis of hydroxyapatite (HAp) nanostructures occurred in the presence of Glycyrrhiza glabra (liquorice) root juice that acts not only as a green capping agent but also as a reductant compound with a high steric hindrance agent. Results showed that the mechanical properties of nano-Ca10(PO4)6(OH)2 structures with a concentration of 60 ppm Li-BioMOF were increased by ∼132.5 MPa and 11.5 GPa for the flexural and Young's modulus, respectively. Based on the optical absorption ultraviolet-visible spectrum, the HAp nanocrystallites had a direct bandgap energy of 4.2 eV. The structural, morphological, and mechanical properties of the as-prepared nanoparticles were characterized with the FT-IR (Fourier-transform infra-red), UV-Vis (ultraviolet visible) spectrums, X-ray diffraction, SEM (scanning electron microscopy), and TEM (transmission electron microscopy) images, and atomic force microscopy (AFM). It is suggested that HAp structures loaded on the Li-BioMOFs are as a suitable and novel substrate which can be considered as a promising biomaterial in dental resin nanocomposites significantly improved the strength and modulus.

An Experimental Investigation of Ultraweak Photon Emission from Adult Murine Neural Stem Cells.

Neurons like other living cells may have ultraweak photon emission (UPE) during neuronal activity. This study is aimed to evaluate UPE from neural stem cells (NSC) during their serial passaging and differentiation. We also investigate whether the addition of silver nanoparticles (AgNPs) or enhancement of UPE (by AgNPs or mirror) affect the differentiation of NSC. In our method, neural stem and progenitor cells of subventricular zone (SVZ) are isolated and expanded using the neurosphere assay. The obtained dissociated cells allocated and cultivated into three groups: groups: I: cell (control), II: cell + mirror, and III: cell + AgNPs. After seven days, the primary neurospheres were counted and their mean number was obtained. Serial passages continuous up to sixth passages in the control group. Differentiation capacity of the resulting neurospheres were evaluated in vitro by immunocytochemistry techniques. Measurement of UPE was carried out by photomultiplier tube (PMT) in the following steps: at the end of primary culture, six serial cell passages of the control group, before and after of the differentiation for 5 minutes. The results show that neither mirror nor AgNPs affect on the neurosphere number. The UPE of the NSC in the sixth subculturing passage was significantly higher than in the primary passage (P < 0.05). AgNPs significantly increased the UPE of the NSC compared to the control group before and after the differentiation (P < 0.05). Also, the treatment with AgNPs increased 44% neuronal differentiation of the harvested NSCs. UPE of NSC after the differentiation was significantly lower than that before the differentiation in each groups, which is in appropriate to the cell numbers (P < 0.0001). The mirror did not significantly increase UPE, neither before nor after the differentiation of NSC. As a conclusion, NSC have UPE-properties and the intensity is increased by serial passaging that are significant in the sixth passage. The AgNPs increases the UPE intensity of NSC that pushes more differentiation of NSC to the neurons. The mirror was not effective in enhancement of UPE. As a result, UPE measurement may be suitable for assessing and studying the effects of nanoparticles in living cells and neurons.

Plasmonic fiber optic hydrogen sensor using oxygen defects in nanostructured molybdenum trioxide film.

Hydrogen is one of the most promising candidates for fulfilling the next energy demands in transportation, aerospace, heating, and power generation. Due to its highly explosive nature, hydrogen leakage sensors are considered a critical industrial need. We propose a room-temperature, high-sensitivity hydrogen sensor using oxygen defect-induced plasmonic features. The proposed sensing probe utilizes nanostructured α-MoO3 thin film as the sensing material in which free carriers and plasmonic properties are induced in response to hydrogen exposure. A notable blue spectral shift of 70.6 nm is observed in response to hydrogen gas exposure from 150 ppm to 2000 ppm, which confirms the sensor's capability for efficient detection of low hydrogen concentrations. The sensor's sensitivity, linearity, and reversibility are experimentally investigated through a simple optical setup.

Green synthesis of strontium nanoparticles self-assembled in the presence of carboxymethyl cellulose: an in vivo imaging study.

Carboxymethyl cellulose (CMC) is one of the main derivatives of cellulose and is used as a drug carrier for hydrophobic and hydrophilic drugs, imaging in vivo, and biological applications. Encapsulation is a technology in which target compounds are coated with wall compounds to form microcapsules. This study reports a new chemical processing wet method for precipitation and encapsulation of strontium nanoparticles (Sr NPs) within CMC structures using a sonochemical method. Preparation parameters such as microwave power and irradiation time as well as morphology and particle size of Sr NPs were also investigated. Products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and atomic force microscopy. In this study, CMC was used as a biological stabilizer in a retentive phase to encapsulate Sr NPs. For the first time, Sr NPs were synthesized using CMC in a cost-effective, simple, fast, micellation-assisted, ultrasound method. Sr NPs were encapsulated in green capping agent structures of either 1%, 2% or 3% weight to provide an efficient optical nanostructure with a high yield at wavelengths 200-700 nm for use in in vivo imaging studies.

Biotemplate of albumen for synthesized iron oxide quantum dots nanoparticles (QDNPs) and investigation of antibacterial effect against pathogenic microbial strains.

Background: Biotemplates are attractive templates for the synthesis of nanometals and inorganic compound nanostructures. Methods: In this work, for the first time, iron oxide quantum dot nanoparticles (QDNPs) were prepared using albumen as a biotemplate. Next, the prepared nanoparticles were characterized using dynamic light scattering for determination and evaluation of the hydrodynamic diameter and zeta potential of the particles. Moreover, optical and scanning electron microscopes were applied to evaluate morphology. Spherically shaped iron oxide QDNPs were obtained with appropriate particle size and distribution. Fe(NO3)3.9H2O and egg whites were used as the source of the Fe element and particle size control agent in the aqueous medium, respectively. Afterward, the effect of calcination temperature parameters on the crystallinity purity and size of Fe nanocrystals were investigated. Also, products were characterized by various detection analyses such as thermogravimetry analysis/DTA, XRD, UV-vis, Fourier transform infrared (FT-IR,) transmission electron microscopy, and SEM. In order to investigate the antibacterial effect of the synthesized Fe nanobiological samples against bacterial strains, they were dissolved in dimethyl sulfoxide and diluted using distilled water. Then, different serial dilutions of 64 µg/mL, 32 µg/mL, 16 µg/mL, 8 µg/mL, 4 3BCg/mL, 2 µg/mL, 1 µg/mL, and 0.5 µg/mL of nanobiological samples were prepared and added to the Mueller-Hinton agar medium. Results: The minimum inhibitory concentration of the synthesized iron oxide quantum dot nanobiological was determined against pathogenic microbial strains of bacteria including Escherichia coli, Pseudomonas aeruginosa, Serratia marcescens, Micrococcus luteus, Bacillus subtilis, Staphylococcus aureus, Staphylococcus epidermidis, and Klebsiella pneumonia on the culture medium plate. Conclusion: The present nanobiological samples can be considered as a new material candidate for antibacterial drugs.