Enhancing the photosensitizing activity of natural flavins: Tuning the heavy-atom effect in the isoalloxazine series.

Structure-photosensitizing activity relationships for a series of flavin analogues were investigated with the final goal of identifying the most potent photosensitizer in these series. The main structural modifications involved the introduction of various halogen atoms in C7- and/or C8-positions on the isoalloxazine ring. These compounds were synthesized by reacting judiciously-functionalized anilines with alloxan. The SAR trends showed that the photosensitizing activity increased with the size of the halogen atoms, confirming the importance of the heavy-atom effect on the photosensitizer's activity. The halogens in C8 were more active than the di-substituted halogens, which in turn were more active than the C7-substituted equivalents. However, even if the photosensitizing activity is slightly less important for the 7- compared to the 8-substituted derivatives, the 7-haloisoalloxazines are promising photosensitizers, as they present a better cellular toxicity profile than the 8-substituted analoges. The photosensitizing activity perfectly correlated with the determined fluorescence for the same compounds. Except for the dihalogeno derivatives, all the compounds were not toxic up to a 50 µM range.

The impact of lipid polyunsaturation on the physical and mechanical properties of lipid membranes.

The lipid composition of cellular membranes and the balance between the different lipid components can be impacted by aging, certain pathologies, specific diets and other factors. This is the case in a subgroup of individuals with psychiatric disorders, such as schizophrenia, where cell membranes of patients have been shown to be deprived in polyunsaturated fatty acids (PUFAs), not only in brain areas where the target receptors are expressed but also in peripheral tissues. This PUFA deprivation thus represents a biomarker of such disorders that might impact not only the interaction of antipsychotic medications with these membranes but also the activation and signaling of the targeted receptors embedded in the lipid membrane. Therefore, it is crucial to understand how PUFAs levels alterations modulate the different physical properties of membranes. In this paper, several biophysical approaches were combined (Laurdan fluorescence spectroscopy, atomic force microscopy, differential scanning calorimetry, molecular modeling) to characterize membrane properties such as fluidity, elasticity and thickness in PUFA-enriched cell membranes and lipid model systems reflecting the PUFA imbalance observed in some diseases. The impact of both the number of unsaturations and their position along the chain on the above properties was investigated. Briefly, data revealed that PUFA presence in membranes increases membrane fluidity, elasticity and flexibility and decreases its thickness and order parameter. Both the level of unsaturation and their position affect these membrane properties.

Re-designing environmentally persistent pharmaceutical pollutant through programmed inactivation: The case of methotrexate.

Environmental emission of pharmaceutical pollutants notably causes the contamination of aquatic ecosystems and drinking water. Typically, reduction of these pollutants in the environment is mostly managed by ameliorated wastewater treatments. Here, we report a method for the eco-design of drugs through the introduction within the molecular structure of a sensitive chemical group responsive to water treatments. The new drugs are thus programmed to fragment more easily and quickly than the original drugs. In this "retro catabolic drug design" strategy, methotrexate was used as drug model and an ether analog displaying a similar pharmacological profile was selected. Using photo-irradiation experiments at 254 nm, a representative drinking water treatment process, the identified transformation products were predominantly obtained from the expected molecular scission. Moreover, a faster kinetics of degradation was measured for the ether analog as compared to methotrexate and its transformation products were far less cytotoxic.

An original approach to measure ligand/receptor binding affinity in non-purified samples.

Several biochemical and biophysical methods are available to determine ligand binding affinities between a biological target and its ligands, most of which require purification, labelling or surface immobilisation. These measurements, however, remain challenging in regards to membrane proteins, as purification processes require their extraction from their native lipid environment, which may in turn impact receptor conformation and functionality. In this study, we have developed a novel experimental procedure using microscale thermophoresis (MST) directly from cell membrane fragments, to determine different ligand binding affinities to a membrane protein, the dopamine D2 receptor (D2R). In order to achieve this, two main challenges had to be overcome: determining the concentration of dopamine D2R in the crude sample; finding ways to minimize or account for non-specific binding of the ligand to cell fragments. Using MST, we were able to determine the D2R concentration in cell membrane fragments to approximately 36.8 ± 2.6 pmol/mg. Next, the doses-responses curves allowed for the determination of KD, to approximately 5.3 ± 1.7 nM, which is very close to the reported value. Important details of the experimental procedure have been detailed in this paper to allow the application of this novel method to various membrane proteins.

The role of the lipid environment in the activity of G protein coupled receptors.

G protein coupled receptors (GPCRs) are a class of membrane proteins that sense extracellular signals ranging from light to odorants and small molecules and activate intracellular signaling pathways that control important physiological responses. Being composed of 7 transmembrane helices linked by extracellular and intracellular loops, the great majority of the sequence of these receptors is embedded in the lipid membrane. Therefore, it is expected GPCR structure and function to be impacted by the surrounding lipid environment and the lipid membrane physico-chemical and mechanical properties. A large number of examples from the literature is provided to highlight the role of the lipid nature (lipid headgroup, membrane polyunsaturation and cholesterol) and membrane physical and mechanical properties (curvature elastic stress, membrane thickness and hydrophobic mismatch, fluidity) in the activity of different GPCRs. In addition, lipids are important co-factors being identified in very specific locations in several GPCR structures. GPCRs and G proteins can also be lipid post-translationally modified and such events can significantly impact membrane binding, trafficking and signaling. These aspects are all treated in this review. Understanding how the lipid can modulate GPCR activity is important not only from a fundamental point of view but also due to the fact that certain pathologies, where GPCRs are central targets, have been associated with important lipid imbalance. Establishing a link between the lipid pathological imbalance and the receptor functioning in such environment is thus essential as it can open avenues to potentially innovative therapeutic strategies.

Plasmon Waveguide Resonance: Principles, Applications and Historical Perspectives on Instrument Development.

Plasmon waveguide resonance (PWR) is a variant of surface plasmon resonance (SPR) that was invented about two decades ago at the University of Arizona. In addition to the characterization of the kinetics and affinity of molecular interactions, PWR possesses several advantages relative to SPR, namely, the ability to monitor both mass and structural changes. PWR allows anisotropy information to be obtained and is ideal for the investigation of molecular interactions occurring in anisotropic-oriented thin films. In this review, we will revisit main PWR applications, aiming at characterizing molecular interactions occurring (1) at lipid membranes deposited in the sensor and (2) in chemically modified sensors. Among the most widely used applications is the investigation of G-protein coupled receptor (GPCR) ligand activation and the study of the lipid environment's impact on this process. Pioneering PWR studies on GPCRs were carried out thanks to the strong and effective collaboration between two laboratories in the University of Arizona leaded by Dr. Gordon Tollin and Dr. Victor J. Hruby. This review provides an overview of the main applications of PWR and provides a historical perspective on the development of instruments since the first prototype and continuous technological improvements to ongoing and future developments, aiming at broadening the information obtained and expanding the application portfolio.

Flavin-Conjugated Nanobombs: Key Structural Requirements Governing Their Self-Assemblies' Morphologies.

In contrast to artificial molecules, natural photosensitizers have the benefit of excellent toxicity profiles and of life-compatible activating energy ranges. Flavins are such photosensitizers that were selected by nature in a plethora of light-triggered biochemical reactions. Flavin-rich nanoparticles could thus emerge as promising tools in photodynamic therapies and in active-targeting drug delivery. Self-assembled flavin-conjugated phospholipids improve the pharmacokinetics of natural flavins and, in the case of controlled morphologies, reduce photobleaching phenomena. The current article presents a proof of concept for the design of riboflavin-rich nanoparticles of tunable morphology from multilamellar patches to vesicular self-assemblies. Coarse-grained simulations of the self-assembling process revealed the key interactions governing the obtained nanomaterials and successfully guided the synthesis of new flavin-conjugates of predictable self-assembly. The obtained flavin-based liposomes had a 65 nm hydrodynamic diameter, were stable, and showed potential photosensitizer activity.

Arylboronate prodrugs of doxorubicin as promising chemotherapy for pancreatic cancer.

This study describes the synthesis of arylboronate-based ROS-responsive prodrugs of doxorubicin and their biological evaluation as anticancer agents. The determination of the most sensitive cancer type toward arylboronate prodrugs is crucial for further consideration of these molecules in clinical phase. To address this goal, an arylboronate-based profluorescent probe was used to compare the capacity of various cancer cell lines to efficiently convert the precursor into the free fluorophore. On the selected MiaPaCa-2 pancreatic cancer cells, a benzeneboronate prodrug exhibited 67% of the cytotoxicity obtained with the free doxorubicin. The prodrug was also able to induce tumor regression on MiaPaCa-2 pancreatic tumor model in ovo. Using this model, the amount of free doxorubicin liberated from this prodrug into the tumor was equivalent to the quantity measured after direct intratumoral injection of the same concentration of doxorubicin.

Synthesis and antikinetoplastid evaluation of bis(benzyl)spermidine derivatives.

This study describes the synthesis and the biological evaluation of twenty-four original bis(benzyl)spermidines. Structural modifications of the polyamine scaffold were performed in order to avoid easily metabolized bonds. Some bis(benzyl)polyamine derivatives have demonstrated promising activity in vitro against Trypanosoma brucei gambiense and Leishmania donovani. From the enzymatic experiments on trypanothione reductase, we observed that this enzyme was not targeted by our compounds. In vivo evaluation on Swiss mice model infected by T. b. gambiense or L. donovani was done with the most interesting compound of the series.

Biosafety of Mesoporous Silica Nanoparticles.

Careful analysis of any new nanomedicine device or disposal should be undertaken to comprehensively characterize the new product before application, so that any unintended side effect is minimized. Because of the increasing number of nanotechnology-based drugs, we can anticipate that regulatory authorities might adapt the approval process for nanomedicine products due to safety concerns, e.g., request a more rigorous testing of the potential toxicity of nanoparticles (NPs). Currently, the use of mesoporous silica nanoparticles (MSN) as drug delivery systems is challenged by a lack of data on the toxicological profile of coated or non-coated MSN. In this context, we have carried out an extensive study documenting the influence of different functionalized MSN on the cellular internalization and in vivo behaviour. In this article, a synthesis of these works is reviewed and the perspectives are drawn. The use of magnetic MSN (Fe3O4@MSN) allows an efficient separation of coated NPs from cell cultures with a simple magnet, leading to results regarding corona formation without experimental bias. Our interest is focused on the mechanism of interaction with model membranes, the adsorption of proteins in biological fluids, the quantification of uptake, and the effect of such NPs on the transcriptomic profile of hepatic cells that are known to be readily concerned by NPs' uptake in vivo, especially in the case of an intravenous injection.

Biocompatibility assessment of functionalized magnetic mesoporous silica nanoparticles in human HepaRG cells.

Magnetic mesoporous silica nanoparticles (M-MSNs) are a promising class of nanoparticles for drug delivery. However, a deep understanding of the toxicological mechanisms of action of these nanocarriers is essential, especially in the liver. The potential toxicity on HepaRG cells of pristine, pegylated (PEG), and lipid (DMPC) M-MSNs were compared. Based on MTT assay and real-time cell impedance, none of these NPs presented an extensive toxicity on hepatic cells. However, we observed by transmission electron microscopy (TEM) that the DMPC and pristine M-MSNs were greatly internalized. In comparison, PEG M-MSNs showed a slower cellular uptake. Whole gene expression profiling revealed the M-MSNs molecular modes of action in a time- and dose-dependent manner. The lowest dose tested (1.6 µg/cm2) induced no molecular effect and was defined as 'No Observed Transcriptional Effect level.' The dose 16 µg/cm2 revealed nascent but transient effects. At the highest dose (80 µg/cm2), adverse effects have clearly arisen and increased over time. The limit of biocompatibility for HepaRG cells could be set at 16 µg/cm2 for these NPs. Thanks to a comparative pathway-driven analysis, we highlighted the sequence of events that leads to the disruption of hepatobiliary system, elicited by the three types of M-MSNs, at the highest dose. The Adverse Outcome Pathway of hepatic cholestasis was implicated. Toxicogenomics applied to cell cultures is an effective tool to characterize and compare the modes of action of many substances. We propose this strategy as an asset for upstream selection of the safest nanocarriers in the framework of regulation for nanobiosafety.

The species origin of the serum in the culture medium influences the in vitro toxicity of silica nanoparticles to HepG2 cells.

The formation of a protein corona around nanoparticles can influence their toxicity, triggering cellular responses that may be totally different from those elicited by pristine nanoparticles. The main objective of this study was to investigate whether the species origin of the serum proteins forming the corona influences the in vitro toxicity assessment of silica nanoparticles. Coronas were preformed around nanoparticles before cell exposures by incubation in fetal bovine (FBS) or human (HS) serum. The compositions of these protein coronas were assessed by nano-LC MS/MS. The effects of these protein-coated nanoparticles on HepG2 cells were monitored using real-time cell impedance technology. The nanoparticle coronas formed in human or fetal bovine serum comprised many homologous proteins. Using human compared with fetal bovine serum, nanoparticle toxicity in HepG2 cells decreased by 4-fold and 1.5-fold, when used at 50 and 10µg/mL, respectively. It is likely that "markers of self" are present in the serum and are recognized by human cell receptors. Preforming a corona with human serum seems to be more appropriate for in vitro toxicity testing of potential nanocarriers using human cells. In vitro cytotoxicity assays must reflect in vivo conditions as closely as possible to provide solid and useful results.

Biological Fate of Fe3O4 Core-Shell Mesoporous Silica Nanoparticles Depending on Particle Surface Chemistry.

The biological fate of nanoparticles (NPs) for biomedical applications is highly dependent of their size and charge, their aggregation state and their surface chemistry. The chemical composition of the NPs surface influences their stability in biological fluids, their interaction with proteins, and their attraction to the cell membranes. In this work, core-shell magnetic mesoporous silica nanoparticles (Fe3O4@MSN), that are considered as potential theranostic candidates, are coated with polyethylene glycol (PEG) or 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) lipid bilayer. Their biological fate is studied in comparison to the native NPs. The physicochemical properties of these three types of NPs and their suspension behavior in different media are investigated. The attraction to a membrane model is also evaluated using a supported lipid bilayer. The surface composition of NPs strongly influences their dispersion in biological fluids mimics, protein binding and their interaction with cell membrane. While none of these types of NPs is found to be toxic on mice four days after intravenous injection of a dose of 40 mg kg-1 of NPs, their surface coating nature influences the in vivo biodistribution. Importantly, NP coated with DMPC exhibit a strong accumulation in liver and a very low accumulation in lung in comparison with nude or PEG ones.

The relevance of membrane models to understand nanoparticles-cell membrane interactions.

Over the past two decades, numerous types of nanoparticles (NPs) have been developed for medical applications; however only a few nanomedicines are actually available on the market. One reason is the lack of understanding and data concerning the NP fate and their behavior upon contact with biological media and cell membranes. Biomimetic membrane models are interesting tools to approach and understand NPs-cell membrane interactions. The use of these models permits one to control physical and chemical parameters and to rapidly compare membrane types and the influence of different media conditions. The interactions between NPs and cell membranes can be qualified and quantified using analytical and modeling methods. In this review, the major studies concerning NPs-cell membrane models and associated methods are described. The advantages and drawbacks for each method are compared for the different models. The key mechanisms of interactions between NPs and cell membranes are revealed using cell membrane models and are interrogated in comparison with the NP behavior in cellulo or in vivo. Investigating the interactions between NPs and cell membrane models is now proposed as an intermediate step between physicochemical characterization of NPs and biological assays.