The Recent Development of Luteolin-loaded Nanocarrier in Targeting Cancer.

INTRODUCTION: Luteolin (LUT), a naturally occurring flavonoid found in vegetables, fruits, and herbal medicines, has been extensively studied for its pharmacological activities, including anti-proliferative and anticancer effects on various cancer lines. It also exhibits potent antioxidant properties and pro-apoptotic activities against human cancers. However, its therapeutic potential is hindered by its poor solubility in water (5 µg/ml at 45°C) and low bioavailability. This research on the development of luteolin-loaded nanocarrier aims to overcome these limitations, thereby opening up new possibilities in cancer treatment. METHODS: This paper covers several nanoformulations studied to increase the solubility and bioavailability of LUT. The physicochemical characteristics of the nanoformulation that influence luteolin's solubility and bioavailability have been the subject of more in-depth investigation. Furthermore, it examines how LUT's anti-inflammatory and antioxidant properties aid in lessening the side effects of chemotherapy. RESULTS: Most nanoformulations, including phytosomes, lipid nanoparticles, liposomes, protein nanoparticles, polymer micelles, nanoemulsions, and metal nanoparticles, have shown promising results in improving the solubility and bioavailability of LUT. This is a significant step forward in enhancing the therapeutic potential of LUT in cancer treatment. Furthermore, the study found that LUT's ability to scavenge free radicals can significantly reduce the side effects of cancer treatment, further highlighting its potential to improve patient outcomes. CONCLUSION: Nanoformulations, because of their unique surface and physiochemical properties, improve the solubility and bioavailability of LUT. However, poor in-vitro and in-vivo correlation and scalability of nanoformulations need to be addressed to achieve good clinical performance of LUT in oncology.

Local delivery of methotrexate/glycyrrhizin-loaded hyaluronic acid nanofiber for the management of oral cancer.

The challenges in treating oral cancer include the limited effectiveness and systemic side effects of conventional chemotherapy and radiation therapy. Hyaluronic acid (HA) based Glycyrrhizin (GL) and Methotrexate (MT) loaded localized delivery systems, specifically nanofiber (NF) based platforms, were developed to address these challenges. The electrospinning method was used for the successful fabrication of a homogenous NF membrane and characterized for morphology, drug entrapment efficiency, tensile strength, and ex-vivo mucoadhesive study. Also, it was evaluated for in-vitro drug release profile, ex-vivo drug permeability, in-vitro anti-inflammatory, apoptosis assay by MTT and flow, and against specific cell lines in order to determine their potential for therapeutic use. Superior tensile breaking force (50 g), mucoadhesive strength of 153 gm/cm2, drug permeability, and releasing properties of designed NF, making them perfect requirements for oral cavity delivery. The anticancer potential of MT in the MTT assay and flow cytometry analysis was significantly increased in oral epidermal carcinoma cell (KB cell) for drug-loaded NF with 63.97 ± 1.99 % apoptosis, at 24 h. With these incorporated, GL with MT in NF had an anti-inflammatory potential, also demonstrated in-vitro and in-vivo. In the Ehrlich Ascites Carcinoma (EAC) induced mice model, the optimal formulation's shows better potential for tumor regression when comparing the developed NF formulation to the drugs. Experimental results show that by lowering mucositis-related inflammation and enhancing the effectiveness of oral cancer treatment, a developed nanofiber-based local drug delivery system offers a feasible strategy for managing oral cancer.

Development, characterization, and evaluation of withaferin-A and artesunate-loaded pH-responsive acetal-dextran polymeric nanoparticles for the management of malaria.

Artemisinin and its derivatives have been commonly used to treat malaria. However, the emergence of resistance against artemisinin derivatives has posed a critical challenge in malaria management. In the present study, we have proposed a combinatorial approach, utilizing pH-responsive acetal-dextran nanoparticles (Ac-Dex NPs) as carriers for the delivery of withaferin-A (WS-3) and artesunate (Art) to improve treatment efficacy of malaria. The optimized WS-3 and Art Ac-Dex NPs demonstrated enhanced pH-responsive release profiles under parasitophorous mimetic conditions (pH 5.5). Computational molecular modeling reveals that Ac-Dex's polymeric backbone strongly interacts with merozoite surface protein-1 (MSP-1), preventing erythrocyte invasion. In-vitro antimalarial activity of drug-loaded Ac-Dex NPs reveals a 1-1.5-fold reduction in IC50 values compared to pure drug against the 3D7 strain of Plasmodium falciparum. Treatment with WS-3 Ac-Dex NPs (100 mg/kg) and Art Ac-Dex NPs (30 mg/kg) to Plasmodium berghei-infected mice resulted in 78.11 % and 100 % inhibition of parasitemia. Notably, the combination therapy comprised of Art and WS-3 Ac-Dex NPs achieved complete inhibition of parasitemia even at a half dose of Art, indicating the synergistic potential of the combinations. However, further investigations are necessary to confirm the safety and effectiveness of WS-3 and Art Ac-Dex NPs for their successful clinical implications.

Exploring the Biofilm Inhibition Potential of a Novel Phytic Acid-Crosslinked Chitosan Nanoparticle: In Vitro and In Vivo Investigations.

The primary factor underlying the virulence of Candida albicans is its capacity to form biofilms, which in turn leads to recurrent complications. Over-the-counter antifungal treatments have proven ineffective in eliminating fungal biofilms and the inflammatory cytokines produced during fungal infections. Chitosan nanoparticles offer broad and versatile therapeutic potential as both antifungal agents and carriers for antifungal drugs to combat biofilm-associated Candida infections. In our study, we endeavoured to develop chitosan nanoparticles utilising chitosan and the antifungal crosslinker phytic acid targeting C. albicans. Phytic acid, known for its potent antifungal and anti-inflammatory properties, efficiently crosslinks with chitosan. The nanoparticles were synthesised using the ionic gelation technique and subjected to analyses including Fourier transform infrared spectroscopy, dynamic light scattering, and zeta potential analysis. The synthesised nanoparticles exhibited dimensions with a diameter (Dh) of 103 ± 3.9 nm, polydispersity index (PDI) of 0.33, and zeta potential (ZP) of 37 ± 2.5 mV. These nanoparticles demonstrated an antifungal effect with a minimum inhibitory concentration (MIC) of 140 ± 2.2 µg/mL, maintaining cell viability at approximately 90% of the MIC value and reducing cytokine levels. Additionally, the nanoparticles reduced ergosterol content and exhibited a 62% ± 1.2 reduction in biofilm susceptibility, as supported by colony-forming unit (CFU) and XTT assays-furthermore, treatment with nanoparticles reduced exopolysaccharide production and decreased secretion of aspartyl protease by C. albicans. Our findings suggest that the synthesised nanoparticles effectively combat Candida albicans infections. In vivo studies conducted on a mouse model of vaginal candidiasis confirmed the efficacy of the nanoparticles in combating fungal infections in vivo.

Injectable Hydrogels: A Paradigm Tailored with Design, Characterization, and Multifaceted Approaches.

Biomaterials denoting self-healing and versatile structural integrity are highly curious in the biomedicine segment. The injectable and/or printable 3D printing technology is explored in a few decades back, which can alter their dimensions temporarily under shear stress, showing potential healing/recovery tendency with patient-specific intervention toward the development of personalized medicine. Thus, self-healing injectable hydrogels (IHs) are stunning toward developing a paradigm for tissue regeneration. This review comprises the designing of IHs, rheological characterization and stability, several benchmark consequences for self-healing IHs, their translation into tissue regeneration of specific types, applications of IHs in biomedical such as anticancer and immunomodulation, wound healing and tissue/bone regeneration, antimicrobial potentials, drugs, gene and vaccine delivery, ocular delivery, 3D printing, cosmeceuticals, and photothermal therapy as well as in other allied avenues like agriculture, aerospace, electronic/electrical industries, coating approaches, patents associated with therapeutic/nontherapeutic avenues, and numerous futuristic challenges and solutions.

Novel Drug Delivery Approaches for the Localized Treatment of Cervical Cancer.

Cervical cancer (CC) is the fourth leading cancer type in females globally. Being an ailment of the birth canal, primitive treatment strategies, including surgery, radiation, or laser therapy, bring along the risk of infertility, neonate mortality, premature parturition, etc. Systemic chemotherapy led to systemic toxicity. Therefore, delivering a smaller cargo of therapeutics to the local site is more beneficial in terms of efficacy as well as safety. Due to the regeneration of cervicovaginal mucus, conventional dosage forms come with the limitations of leaking, the requirement of repeated administration, and compromised vaginal retention. Therefore, these days novel strategies are being investigated with the ability to combat the limitations of conventional formulations. Novel carriers can be engineered to manipulate bioadhesive properties and sustained release patterns can be obtained thus leading to the maintenance of actives at therapeutic level locally for a longer period. Other than the purpose of CC treatment, these delivery systems also have been designed as postoperative care where a certain dose of antitumor agent will be maintained in the cervix postsurgical removal of the tumor. Herein, the most explored localized delivery systems for the treatment of CC, namely, nanofibers, nanoparticles, in situ gel, liposome, and hydrogel, have been discussed in detail. These carriers have exceptional properties that have been further modified with the aid of a wide range of polymers in order to serve the required purpose of therapeutic effect, safety, and stability. Further, the safety of these delivery systems toward vital organs has also been discussed.

Non-Invasive Delivery of Insulin for Breaching Hindrances against Diabetes.

Insulin is recognized as a crucial weapon in managing diabetes. Subcutaneous (s.c.) injections are the traditional approach for insulin administration, which usually have many limitations. Numerous alternative (non-invasive) slants through different routes have been explored by the researchers for making needle-free delivery of insulin for attaining its augmented absorption as well as bioavailability. The current review delineating numerous pros and cons of several novel approaches of non-invasive insulin delivery by overcoming many of their hurdles. Primary information on the topic was gathered by searching scholarly articles from PubMed added with extraction of data from auxiliary manuscripts. Many approaches (discussed in the article) are meant for the delivery of a safe, effective, stable, and patient friendly administration of insulin via buccal, oral, inhalational, transdermal, intranasal, ocular, vaginal and rectal routes. Few of them have proven their clinical efficacy for maintaining the glycemic levels, whereas others are under the investigational pipe line. The developed products are comprising of many advanced micro/nano composite technologies and few of them might be entering into the market in near future, thereby garnishing the hopes of millions of diabetics who are under the network of s.c. insulin injections.

Development of Betulin-Loaded Nanostructured Lipid Carriers for the Management of Imiquimod-Induced Psoriasis.

Psoriasis is a complex and persistent autoimmune skin disease. The present research focused on the therapeutic evaluation of betulin-loaded nanostructured lipid carriers (BE-NLCs) towards managing psoriasis. The BE-NLCs were synthesized using the emulsification cum solidification method, exhibiting a spherical shape with a particle size of 183.5±1.82nm and a narrow size distribution window (PDI: 0.142±0.05). A high zeta potential -38.64±0.05mV signifies the relative stability of the nano-dispersion system. BE-NLCs show a drug loading and entrapment efficiency of 47.35±3.25% and 87.8±7.86%, respectively. In vitro release study, BE NLCs show a cumulative percentage release of 90.667±5.507% over BE-sol (57.334±5.03%) and BD-oint (42±4.58%) for 720min. In an ex vivo 24-h permeation study, % cumulative amount permeated per cm2 was found to be 55.667±3.33% from BE-NLCs and 32.012±3.26% from BE-sol, demonstrating a better permeability of 21.66% when compared to the standard formulation BD-oint. The in vivo anti-psoriatic activity in the IMQ-induced model shows topical application of BE-sol, BE-NLCs, and BD-oint resulted in recovery rates of 56%, 82%, and 65%, respectively, based on PASI (Psoriasis Area and Severity Index) score. Notably, BE-NLCs demonstrated a more significant reduction in spleen mass, indicating attenuation of the local innate immune system in psoriatic mice. Reductions in TNF-α, IL-6, and IL-17 levels were observed in both BE-sol and BE-NLCs groups compared to the disease control (DC) group, with BE-NLCs exhibiting superior outcomes (74.05%, 44.76%, and 49.26% reduction, respectively). Soy lecithin and squalene-based NLCs could be better carrier system for the improvement of the therapeutic potential of BE towards management of psoriasis.

Chemometric profiling and anti-arthritic activity of aerial parts of Glinus oppositifolius (L.) Aug. DC.

ETHNOPHARMACOLOGICAL RELEVANCE: Glinus oppositifolius (L.) Aug. DC. belongs to the family Molluginaceae, an annual prostrate herb traditionally used to treat inflammations, arthritis, malarial, wounds, fevers, diarrhoea, cancer, stomach discomfort, jaundice, and intestinal parasites. However, the anti-arthritic activity of the aerial part has still not been reported. AIM OF THE STUDY: To investigate the antioxidant and anti-arthritic activity of G. oppositifolius in Complete Freund's Adjuvant (CFA) induced rats. MATERIALS AND METHODS: The dried aerial parts of this plant material were defatted with n-hexane and extracted by methanol using a soxhlet apparatus. The in vitro anti-arthritic activity of methanolic extract of G. oppositifolius (MEGO) was evaluated in protein denaturation, membrane stabilization, and inhibition of proteinase assay at 25, 50, 100, 200, and 400 µg/ml concentrations. Female Wistar rats were immunized sub-dermally into the right hind paw with 0.1 ml of CFA. Rats were administered with MEGO at doses of 200 and 400 mg/kg once daily for fourteen days after arthritis induction. Assessment of arthritis was performed by measuring paw diameter, arthritic index, arthritic score, body weight, organ weight, and hematological and biochemical parameters, followed by the analysis of pro-inflammatory cytokines such as tumor necrosis factor-alpha (TNF-α), interleukin 6 (IL-6), interleukin-1-beta (IL-1ß), cyclooxygenase-2 (COX-2), interleukin 13 (IL-13) and interleukin 10 (IL-10) and histopathological study. In vivo antioxidant effect was investigated in enzymatic assays. The presence of phytoconstituents was analyzed by Gas Chromatography-Mass Spectrometry (GC-MS) and Liquid Chromatography-Mass Spectrometry (LC-MS), respectively. In silico molecular docking study of the compounds was carried out against COX-2, IL-1ß, IL-6, and TNF-α using AutoDock 4.2 and BIOVIA-Discovery Studio Visualizer software. RESULTS: MEGO's in vitro anti-arthritic activity showed dose-dependent inhibition of protein denaturation, membrane stabilization, and proteinase inhibition, followed by significant in vivo anti-arthritic activity. The rats treated with MEGO showed tremendous potential in managing arthritis-like symptoms by restoring hematological, biochemical, and histological changes in CFA-induced rats. MEGO (200 and 400 mg/kg) showed a significant alleviation in the levels of hyper expressed inflammatory mediators (TNF-α, IL-1ß, and IL-6) and oxidative stress (SOD, CAT, GSH, and LPO) in CFA-induced rats. Spergulagenin-A as identified by LC-MS analysis, exhibited the highest binding affinity against COX-2 (-8.6), IL-1ß (7.2 kcal/mol), IL-6 (-7.4 kcal/mol), and TNF-α (-6.5 kcal/mol). CONCLUSIONS: Provided with the comprehensive investigation, methanolic extract of G. oppositifolius against arthritic-like condition is a proof of concept that revalidates its ethnic claim. The presence of Spergulagenin-A might be responsible for the anti-arthritic activity.

Implementation of Silver Nanoparticles Green Synthesized with Leaf Extract of Coccinia grandis as Antimicrobial Agents Against Head and Neck Infection MDR Pathogens.

BACKGROUND: Head and neck infections (HNI) associated with multidrug resistance (MDR) offer several health issues on a global scale due to inaccurate diagnosis. OBJECTIVES: This study aimed to identify the bacteria and Candidal isolates and implement the silver nanoparticles green synthesized with leaf extract of Coccinia grandis (Cg-AgNPs) as a therapeutic approach against HNI pathogens. METHODS: The Cg-AgNPs were characterized by the UV-visible spectrophotometer, FT-IR analysis, Zeta particle size, Zeta potential, and field emission scanning electron microscope (FESEM) analysis to validate the synthesis of nanoparticles. Additionally, the antimicrobial activity of Cg-AgNPs was presented by the zone of inhibition (ZOI), minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration (MBC/MFC), and antibiofilm assay. Moreover, the cell wall rupture assay was visualized on SEM for the morphological study of antimicrobial activities, and the in-vivo toxicity was performed in a swiss mice model to evaluate the impact of Cg-AgNPs on various biological parameters. RESULTS: Different bacterial strains (Staphylococcus aureus, Acinetobacter baumannii, Klebsiella pneumoniae, and Pseudomonas aeruginosa) and Candida sp. (Candida albicans, Candida tropicalis, Candida orthopsilosis, and Candida glabrata) were identified. The MIC, MBC, and antibiofilm potential of Cg-AgNPs were found to be highest against A. baumannii: 1.25 µg/ml, 5 µg/ml, and 85.01±5.19% respectively. However, C. albicans and C. orthopsilosis revealed 23mm and 21mm of ZOI. Subsequently, the micromorphology of the cell wall rupture assay confirmed the efficacy of Cg-AgNPs, and no significant alterations were seen in biochemical and hematological parameters on the swiss mice model in both acute and subacute toxicity studies. CONCLUSION: The green synthesized Cg-AgNPs have multifunctional activities like antibacterial, anticandidal, and antibiofilm activity with no toxicity and can be introduced against the HNI pathogens.

Spray-Dried Mucoadhesive Re-dispersible Gargle of Chlorhexidine for Improved Response Against Throat Infection: Formulation Development, In Vitro and In Vivo Evaluation.

Drug delivery to the buccal mucosa is one of the most convenient ways to treat common mouth problems. Here, we propose a spray-dried re-dispersible mucoadhesive controlled release gargle formulation to improve the efficacy of chlorhexidine. The present investigation portrays an approach to get stable and free-flowing spray-dried porous aggregates of chlorhexidine-loaded sodium alginate nanoparticles. The ionic gelation technique aided with the chlorhexidine's positive surface charge-based crosslinking, followed by spray drying of the nanoparticle's dispersion in the presence of lactose- and leucine-yielded nano-aggregates with good flow properties and with a size range of about 120-350 nm. Provided with the high entrapment efficiency (87%), the particles showed sustained drug release behaviors over a duration of 10 h, where 87% of the released drug got permeated within 12 h. The antimicrobial activity of the prepared formulation was tested on S. aureus, provided with a higher zone of growth inhibition than the marketed formulation. Aided with an appropriate mucoadhesive strength, this product exhibited extended retention of nanoparticles in the throat region, as shown by in vivo imaging results. In conclusion, the technology, provided with high drug retention and extended effect, could be a potential candidate for treating several types of throat infections.

Development and Evaluation of Dutasteride Nanoemulgel for the Topical Delivery against Androgenic Alopecia.

BACKGROUND: Dutasteride is approximately three times more potent than finasteride in treating alopecia. For reducing systemic exposure to dihydrotestosterone (DHT), researchers have shown special interest in developing topical formulations for treating androgenic alopecia. Dutasteride emulsification may lead to good skin penetration and improved availability in different lipophilic skin environments. OBJECTIVES: This study aimed to encapsulate the drug into the lipidic carrier system for better local availability in the scalp skin, develop and evaluate nanoemulgel of dutasteride to ensure efficient topical administration, and perform the in-vivo activity of the developed gel for improved efficacy against alopecia. METHODS: Dutasteride-loaded nanoemulsion was prepared by a high-speed homogenizer, followed by thickening of the dispersion using Carbopol 934. Skin permeation and accumulation were investigated in the excised skin of male Swiss albino mice. The nanoemulgel was characterized based on pH, stress stability, viscosity, and hardness. RESULTS: The optimized dutasteride-loaded nanoemulsion had a size of 252.33 ± 8.59 nm, PDI of 0.205 ± 0.60, and drug content of 98.65 ± 1.78%. Stress stability was performed was well observed in nanoemulsion formulation. Nanoemulgel evaluation results were as follows: pH 5-6 was desirable for topical application, hardness was 43 gm, and spreadability was 79 gm with in vitro release of nanoemulgel at 91.98% and permeation study at 13.67%. CONCLUSION: The in vivo studies demonstrated the growth of newer hair follicles and increased hair diameter and length in dutasteride-loaded nanoemulgel-treated alopecia animals compared to the marketed sample and testosterone-treated group. Provided with the same and long-term storage stability, the developed formulation is supposed to offer a good option for the topical administration of dutasteride in treating androgenic alopecia.

Identification of starvation-mimetic bioactive phytocomponent from Withania somnifera using in-silico molecular modelling and flow cytometry-based analysis for the management of malaria.

Multidrug resistance episodes in malaria increased from 3.9% to 20% from 2015 to 2019. Synchronizing the clinical manifestation in chronological sequence led to a unique impression on glucose demand (increased up to 100-fold) by the parasite-infected RBCs. Hence, restriction in the glucose uptake to parasite-infected RBCs could be an alternative approach to conquer the global burden of malaria to a greater extent. A C28 steroidal lactone Withaferin A (WS-3) isolated from Withania somnifera leave extract shows better thermodynamically stable interactions with the glucose transporters (GLUT-1 and PfHT) to standard drugs metformin and lopinavir. MD simulations for a trajectory period of 100 ns reflect stable interactions with the interactive amino acid residues such as Pro141, Gln161, Gln282, Gln283, Trp388, Phe389, and Phe40, Asn48, Phe85, His168, Gln169, Asn311 which potentiating inhibitory activity of WS-3 against GLUT-1 and PfHT respectively. WS-3 was non-hemotoxic (%hemolysis <5%) for a high concentration of up to 1 mg/ml in the physiological milieu. However, the %hemolysis significantly increased up to 30.55 ± 0.929% in a parasitophorous simulated environment (pH 5.0). Increased hemolysis of WS-3 could be due to the production of ROS in an acidic environment. Further, the inhibitory activity of WS-3 against both glucose transporters was supported with flow cytometry-based analysis of parasite-infected RBCs. Results show that WS-3 has low mean fluorescence intensities for both target proteins compared to conventional drugs, suggesting a potential sugar transporter inhibitor against GLUT-1 and PfHT for managing malaria. Communicated by Ramaswamy H. Sarma.

Design and evaluation of antibacterials crosslinked chitosan nanoparticle as a novel carrier for the delivery of metronidazole to treat bacterial vaginosis.

Bacterial vaginosis (BV) is a recurring, chronic infection that is difficult to treat due to the limited bioavailability of antimicrobials within vaginal epithelial cells. Vaginal administration, because of lower dosing and systemic exposure offers a viable option for treating vaginal infections. In this study, Metronidazole-loaded chitosan nanoparticles were synthesised employing borax (BX) or tannic acid (TA) as an antimicrobial crosslinking agent for treating BV. The prepared NPs were characterized for various physical, physicochemical, pharmaceutical, thermal and antibacterial properties. Morphological investigation revealed that nanoparticles prepared from 0.5 % w/v chitosan, 1.2 % w/v BX, and 0.4 % w/v metronidazole (MTZ) were non-spherical, with particle sizes of 377.4 ± 37.3 nm and a zeta potential of 34 ± 2.1 mV. The optimised formulation has MIC values of 24 ± 0.5 and 59 ± 0.5 µg/mL, against Escherichia coli (E.coli) and Candida albicans (C.albicans) respectively. The results of DSC and XRD demonstrated no change in the physical state of the drug in the finished formulation. Under simulated vaginal fluid, the optimised formulation demonstrates a cumulative drug release of about 90 % within 6h. The prepared borax crosslinked NPs exhibit anti-fungal activities by inhibiting ergosterol synthesis. The in-vivo antibacterial data indicated a comparable reduction in bacterial count compared to the marketed formulation in female Swiss albino mice treated with optimised nanoparticles. According to histopathological findings, the prepared nanoparticle was safe for vaginal use. Based on the experimental findings, it was concluded that MBCSNPs, due to their good physiochemical and antimicrobial properties, could serve as a potential topical alternative for treating BV and reducing fungal infection.

Metronidazole loaded chitosan-phytic acid polyelectrolyte complex nanoparticles as mucoadhesive vaginal delivery system for bacterial vaginosis.

Bacterial vaginosis (BV) is a recurring infection that is difficult to treat due to the limited bioavailability of antimicrobials. In this study, Metronidazole (MTZ)-loaded chitosan nanoparticles (MCSNP) were synthesized employing phytic acid (PA) as a crosslinking agent for treating bacterial vaginosis. The prepared MCSNPs were characterized for size, shape, surface charge, compatibility, cytotoxicity, biofilm inhibition, and in-vitro/in-vivo antimicrobial activities. Morphological examination revealed that nanoparticles generated from 0.535 % w/v chitosan and 0.112 % w/v PA were non-spherical, discontinuous, and irregular, with zeta potential ranging from 25.00 ± 0.45 to 39 ± 0.7. The results of DSC and XRD demonstrated no change in the physical state of the drug in the finished formulation. The optimized formulation demonstrates a cumulative drug release of about 98 ± 1.5 % within 8 h. Antimicrobial studies demonstrated that the optimized formulation had enhanced efficacy against acid-adapted BV pathogens, with a MIC value of 0.9 ± 0.1 µg/mL. Compared to the MTZ alone, the in-vivo antibacterial results of in the case of developed nanoparticles showed a four-fold reduction in bacterial count in female Swiss albino mice. Based on the experimental findings, it was concluded that MCSNPs, due to their excellent physiochemical and antibacterial properties, could serve as a potential topical alternative for treating BV.

Implementation of Quality by Design Approaches for Development and Validation of Reverse-Phase High-Performance Liquid Chromatography Assay Method for Determination of Glycyrrhizin in Nanoformulation.

Glycyrrhizin (GL) is the principal constituent of Glycyrrhiza glabra, having antiallergic, anticancer, anti-inflammatory, and antimicrobial action. The reverse-phase high-performance liquid chromatography (RP-HPLC) analytical method was used to quantitatively estimate GL in a nanoformulation and validated as per International Conference on Harmonization Q2 (R1) standards. A stationary phase of the C18-HL reversed-phase column and a mobile phase of acetonitrile and water were used for effective elution. The chromatographic conditions of RP-HPLC were optimized utilizing a quality-by-design approach to accomplish the required chromatographic separation of GL from its nanoformulation with minimal experimental runs. Optimized RP-HPLC conditions for the assay method consist of acetonitrile (41%) and water, pH 1.8, balanced with phosphoric acid (0.1%) as a mobile phase with a flow rate of 1 mL/min. The retention time was found at 7.25 min, and method validation confirmed its sensitivity, preciseness, accuracy, and robustness.

Nanofibers of Glycyrrhizin/Hydroxypropyl-ß-Cyclodextrin Inclusion Complex: Enhanced Solubility Profile and Anti-inflammatory Effect of Glycyrrhizin.

Despite having a wide range of therapeutic advantages, glycyrrhizin (GL) has few commercial applications due to its poor aqueous solubility. In this study, we combined the benefits of hydroxypropyl ß-cyclodextrin (HP-ßCD) supramolecular inclusion complexes and electrospun nanofibers to improve the solubility and therapeutic potential of GL. A molecular inclusion complex containing GL and HP-ßCD was prepared by lyophilization at a 1:2 molar ratio. GL and hydroxypropyl ß-cyclodextrin inclusion complexes were also incorporated into hyaluronic acid (HA) nanofibers. Prepared NF was analyzed for physical, chemical, thermal, and pharmaceutical properties. Additionally, a rat model of carrageenan-induced hind paw edema and macrophage cell lines was used to evaluate the anti-inflammatory activity of GL-HP-ßCD NF. The DSC and XRD analyses clearly showed the amorphous state of GL in nanofibers. In comparison to pure GL, GL-HP-ßCD NF displayed improved release (46.6 ± 2.16% in 5 min) and dissolution profiles (water dissolvability ≤ 6 s). Phase solubility results showed a four-fold increase in GL solubility in GL-HP-ßCD NF. In vitro experiments on cell lines showed that inflammatory markers like IL-1ß, TNF-α, and IL-6 were significantly lower in GL-HP-ßCD NF compared to pure GL (p < 0.01 and p < 0.05). According to in vivo results, the prepared nanofiber exhibits a better anti-inflammatory effect than pure GL (63.4% inhibition vs 53.7% inhibition). The findings presented here suggested that GL-HP-ßCD NF could serve as a useful strategy for improving the therapeutic effects of GL.

Facile fabrication of Nishamalaki churna mediated silver nanoparticles with antibacterial application.

Antimicrobial resistance (AMR) is one of the most serious threats to today's healthcare system. The prime factor behind increasing AMR is the formation of complex bacterial biofilms which acts as the protective shield between the bacterial cell and the antimicrobial drugs. Among various nanoformulations, green synthesized metallic silver nanoparticles are currently gaining research focus in safely breaking bacterial biofilms due to the inherent antimicrobial property of silver. In the current work, the aqueous extract of the ayurvedic formulation Nishamalaki churna is used to exhibit one pot green synthesis of silver nanoparticles. The physicochemical characteristics of Nishamalaki churna extract mediated AgNPs were evaluated using various analytical techniques, like UV-Visible spectrophotometer, FT-IR spectroscopy, SEM, XRD, DLS-Zeta potential analyzer etc. The synthesized spherical AgNPs were well formed within the size range of 30 nm to 80 nm. Furthermore, the synthesized AgNPs showed potent antibacterial effects against two primary AMR-causing bacterial species like Staphylococcus aureus and Pseudomonas aeruginosa with the successful destruction of their biofilm formation. Additionally, these AgNPs have shown profound antioxidant and anti-inflammatory activities as desirable add-on effects required by a prospective antibacterial agent.

Antiviral application of Carbohydrate Polymers: A review.

BACKGROUND: Viral disease is a well-known cause of a significant impact on economic losses and threatens developed and developing societies. High mutation rates and the lack of ability of conventional formulations to target specific cells pose substantial hurdles to the successful treatment of viral diseases.

Methods: We conducted a preliminary search by a standard procedure. With hand searching, we conducted an advanced search across several electronic databases. After defining the selection criteria, two writers independently reviewed and evaluated the first 500 abstracts before screening the remaining 300. Since there was 97% agreement on the screening decisions, only one reviewer conducted the screening. The pre-planned data extraction process was accomplished, and the thoroughness of the description of participation techniques was assessed. Additional data extraction was carried out for articles with the most detailed illustrations. Four stakeholder representatives co-authored this systematic review.

Results: Incorporating selective carbohydrate polymers into the antiviral pharmaceutical compositions could help to manage biological complications associated with viral infections. We included 172 papers in which authors were involved in a systematic review. The present review explains the role of carbohydrate polymers (chitosan, carrageenan, alginate, cyclodextrin, dextran, and heparin) in the prevention and treatment of viral infections in terms of their source, molecular weight, surface charge, chemical composition, and structure. Additionally, the review describes the primary mechanism of drug delivery performance of carbohydrate polymers to improve the antiviral properties and pharmacokinetic behaviour of lamivudine, zidovudine, acyclovir, etc.

Conclusion: The article discussed the role of carbohydrate polymers in mitigating virus-induced associated complications like bacterial infection, cardiovascular disorder, oxidative stress, and metabolic disorder. As a result, this work will provide valuable information to scientists, researchers, and clinicians for suitable carbohydrate polymer-based pharmaceutical development.

Opportunity in nanomedicine to counter the challenges of current drug delivery approaches used for the treatment of malaria: a review.

Malaria is a life-threatening parasitic disease transmitted by the infected female Anopheles mosquito. The development of drug tolerance and challenges related to the drugs' pharmacodynamic and pharmacokinetic parameters limits the antimalarial therapeutics response. Currently, nanotechnology-based drug delivery system provides an integrative platform for antimalarial therapy by improving the drug physicochemical properties, combating multidrug resistance, and lowering antimalarial drug-related toxicity. In addition, surface engineered nanocarrier systems offer a variety of alternatives for site-specific/targeted delivery of antimalarial therapeutics, anticipating better clinical outcomes at low drug concentrations and low toxicity profiles, as well as reducing the likelihood of the emergence of drug resistance. So, constructing nano carrier-based approaches for drug delivery has been considered the foremost strategy to combat malaria. This review focuses on the numerous nanotherapeutic strategies utilised to treat malaria as well as the benefits of nanotechnology as a potentially effective therapeutic.