Magnetic targeting of lornoxicam/SPION bilosomes loaded in a thermosensitive in situ hydrogel system for the management of osteoarthritis: Optimization, in vitro, ex vivo, and in vivo studies in rat model via modulation of RANKL/OPG.

Osteoarthritis is a bone and joint condition characterized pathologically by articular cartilage degenerative damage and can develop into a devastating and permanently disabling disorder. This investigation aimed to formulate the anti-inflammatory drug lornoxicam (LOR) into bile salt-enriched vesicles loaded in an in situ forming hydrogel as a potential local treatment of osteoarthritis. This was achieved by formulating LOR-loaded bilosomes that are also loaded with superparamagnetic iron oxide nanoparticles (SPIONs) for intra-muscular (IM) administration to improve joint targeting and localization by applying an external magnet to the joint. A 31.22 full factorial design was employed to develop the bilosomal dispersions and the optimized formula including SPION (LSB) was loaded into a thermosensitive hydrogel. Moreover, in vivo evaluation revealed that the IM administration of LSB combined with the application of an external magnet to the joint reversed carrageen-induced suppression in motor activity and osteoprotegerin by significantly reducing the elevations in mitogen-activated protein kinases, extracellular signal-regulated kinase, and receptor activator of nuclear factor kappa beta/osteoprotegerin expressions. In addition, the histopathological evaluation of knee joint tissues showed a remarkable improvement in the injured joint tissues. The results proved that the developed LSB could be a promising IM drug delivery system for osteoarthritis management.

Formulation and Evaluation of Prednisolone Sodium Metazoate-Loaded Mucoadhesive Quatsomal Gel for Local Treatment of Recurrent Aphthous Ulcers: Optimization, In Vitro, Ex Vivo, and In Vivo Studies.

This study aims to formulate a buccal mucoadhesive gel containing prednisolone sodium metazoate-loaded quatsomes for efficient localized therapy of recurrent aphthous ulcers. Quatsomes were prepared using a varied concentration of quaternary ammonium surfactants (QAS) and cholesterol (CHO). A 23 factorial design was conducted to address the impact of independent variables QAS type (X1), QAS to CHO molar ratio (X2), and sonication time (X3). The dependent variables were particle size (PS; Y1), polydispersity index (PDI; Y2), zeta potential (ZP; Y3), entrapment efficiency percent (EE%; Y4) and percent of drug released after 6 h (Q6%: Y5). Then, the selected quatsomes formula was incorporated into different gel bases to prepare an optimized mucoadhesive gel to be evaluated via in vivo study. The PS of the developed quatsomes ranged from 69.47 ± 0.41 to 113.28 ± 0.79 nm, the PDI from 0.207 ± 0.004 to 0.328 ± 0.004, ZP from 45.15 ± 0.19 to 68.1 ± 0.54 mV, EE% from 79.62 ± 1.44 to 98.60% ± 1.22 and Q6% from 58.39 ± 1.75 to 94.42% ± 2.15. The quatsomal mucoadhesive gel showed rapid recovery of ulcers, which was confirmed by the histological study and the evaluation of inflammatory biomarkers. These results assured the capability of the developed quatsomal mucoadhesive gel to be a promising formulation for treating buccal diseases.

Enhanced Wound Healing Potential of Spirulina platensis Nanophytosomes: Metabolomic Profiling, Molecular Networking, and Modulation of HMGB-1 in an Excisional Wound Rat Model.

Excisional wounds are considered one of the most common physical injuries. This study aims to test the effect of a nanophytosomal formulation loaded with a dried hydroalcoholic extract of S. platensis on promoting excisional wound healing. The Spirulina platensis nanophytosomal formulation (SPNP) containing 100 mg PC and 50 mg CH exhibited optimum physicochemical characteristics regarding particle size (598.40 ± 9.68 nm), zeta potential (-19.8 ± 0.49 mV), entrapment efficiency (62.76 ± 1.75%), and Q6h (74.00 ± 1.90%). It was selected to prepare an HPMC gel (SPNP-gel). Through metabolomic profiling of the algal extract, thirteen compounds were identified. Molecular docking of the identified compounds on the active site of the HMGB-1 protein revealed that 12,13-DiHome had the highest docking score of -7.130 kcal/mol. SPNP-gel showed higher wound closure potential and enhanced histopathological alterations as compared to standard (MEBO® ointment) and S. platensis gel in wounded Sprague-Dawley rats. Collectively, NPS promoted the wound healing process by enhancing the autophagy process (LC3B/Beclin-1) and the NRF-2/HO-1antioxidant pathway and halting the inflammatory (TNF-, NF-κB, TlR-4 and VEGF), apoptotic processes (AIF, Caspase-3), and the downregulation of HGMB-1 protein expression. The present study's findings suggest that the topical application of SPNP-gel possesses a potential therapeutic effect in excisional wound healing, chiefly by downregulating HGMB-1 protein expression.

Superparamagnetic iron oxide loaded chitosan coated bilosomes for magnetic nose to brain targeting of resveratrol.

The objective of this study was to improve effectiveness of resveratrol (RES) through brain targeting by the intranasal olfactory mucosa for the treatment Alzheimer's disease (AD). To attain this, chitosan coated bilosomes (non ionic surfactant vesicles stabilized by bile salts, loaded with RES and superparamagnetic iron oxide nanoparticles (SPIONs) were prepared and incorporated into sodium alginate/PVP wafers. In vitro characterization of bilosomes including colloidal characteristics, entrapment efficiency and in vitro release was carried out. Hydration capacity, porosity percentage, morphology and in vitro release for selected wafer formulation were also investigated. Particle size of selected bilosomes, CS coated bilosome and SPION bilosomes was 208, 238 and 243 nm, respectively and they provided sustained RES release for 24 h. Both formulations were loaded in wafers and intra-nasally administered in mice with lipopolysaccharide induced AD model. Neurobehavioral tests, AD markers analysis, RT-PCR, western blotting and histopathological evaluation of the dissected brains were carried out. Results revealed the superiority of SPION bilosomes over conventional bilosomes and RES suspension in improving cognitive and memory functions, reduction of pro-inflammatory markers levels and down regulation of expression of NF-κB and P38. This may be attributed to enhanced RES therapeutic effects upon nanoencapsulation, loading into wafers, nasal administration and enhanced targeting the application of an external magnetic field.

Novel lipid-polymer hybrid nanoparticles incorporated in thermosensitive in situ gel for intranasal delivery of terbutaline sulphate.

AIM: The present work aimed to improve the bioavailability of terbutaline sulphate (TS) and to prolong its nasal residence time for the treatment of asthma. METHODS: Chitosan/pectin polyelectrolyte complex nanoparticles (CS/PC) were prepared by ionic gelation method and coated with phospholipid (PL) and then incorporated into optimised thermosensitive in situ gel. RESULTS: The optimal PL-coated nanoparticle formulation (LP1) showed the smallest particle size (345.5 nm), the highest zeta potential (32.9 mV) and the greatest percent drug released after 6 h (71%). The optimum in situ gel loaded with LP1 (NG3) showed three times greater permeation through nasal mucosa than aqueous solution of TS and revealed about 94% and 92% of the effect of IV injection of drug solution on tidal volume and peak expiratory flow in histamine treated rats, respectively. CONCLUSION: The developed PL-coated CS/PC/in situ gel could be considered as a promising intranasal formulation of TS for asthma management.

Histopathological evaluation of different regenerative protocols using Chitosan-based formulations for management of immature non-vital teeth with apical periodontitis: In vivo study.

This study aimed to assess regenerative treatment protocols for maturogenesis of immature teeth with apical periodontitis in dogs. Apical periodontitis was induced in immature premolars of 8 mongrel dogs teeth that were divided into 5 groups; regeneration via blood clotting (REG group); chitosan loaded with demineralised bone matrix (REG-CD group); chitosan loaded with dexamethazone corticosteroid (REG-CC group); and positive and negative control groups. All groups showed comparable apical hard tissue formation and significantly different from the control group. Results also showed decrease in inflammatory tissue reaction, bone resorption and periodontal ligament thickness. Tissue reaction and inflammatory infiltrates were significantly less in REG-CC group compared to others. Other parameters showed no significant difference. In conclusion, regenerative endodontic techniques using chitosan-based formulations have the potential to be used as an alternative for root maturation in teeth with apical periodontitis.

Tailoring of PEGylated bilosomes for promoting the transdermal delivery of olmesartan medoxomil: in-vitro characterization, ex-vivo permeation and in-vivo assessment.

INTRODUCTION: The intention of this work was to load olmesartan medoxomil (OLM), a sparsely water soluble antihypertensive bioactive with low oral bioavailability (26%), into PEGylated bilosomes (PBs) for augmenting its transdermal delivery. PBs contain PEGylated single chain edge activator besides the components of traditional bilosomes (Span 60, cholesterol and bile salts). The PEG gives further resilience to vesicle membrane and is speculated to augment both permeability and bioavailability of OLM. METHODS: A 24 factorial experiment was constructed to inspect the impact of diverse variables on vesicles' features and sort out the optimal formula adopting Design Expert® software utilizing thin film hydration technique. Vesicles' evaluation was done by finding out entrapment efficiency percent (EE%), particle size (PS), polydispersity index (PDI), zeta potential (ZP) and amount of drug released after 6 hrs (Q6h). The optimal formula was selected and characterized for further investigations. RESULTS: The optimal formula (PB15) showed spherical vesicles with EE% of 72.49±0.38%, PS of 559.30±10.70 nm, PDI of 0.57±0.15, ZP of -38.35±0.65 mV and Q6h of 59.60±0.24%. PB15 showed higher deformability index (28.39±5.71 g) compared to traditional bilosomes (5.88±0.90 g) and transethosomes (14.94±0.63 g). Further, PB15 showed superior skin permeation from rat's skin relative to the drug suspension. Moreover, confocal laser scanning microscopy examination revealed efficient penetration of the fluoro-labeled PB15 through skin. Histopathological study ensured the safety of PB15. In addition, in-vivo skin deposition studies showed higher OLM deposition in rat's skin from PB15 compared to transethosomes and OLM suspension. Furthermore, pharmacodynamic and pharmacokinetic studies performed using male Wistar rats and male Albino rabbits, respectively, showed the superiority of PB15 over oral tablets. PB15 was found to have significantly higher AUC0-48 and AUC0-∞ relative to the oral tablets. As well, the relative bioavailability of PB15 was found to be 235.04%. CONCLUSION: Overall, the obtained results confirmed the creditable effect of PB15 for transdermal delivery.

Use of transethosomes for enhancing the transdermal delivery of olmesartan medoxomil: in vitro, ex vivo, and in vivo evaluation.

INTRODUCTION AND AIM: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability due to extensive first-pass metabolism. This study aimed to prepare transetho somes (TEs) for enhancing the transdermal delivery of OLM to avoid its oral problems. METHODS: TE formulae were prepared utilizing 51.31 full factorial design using various surfactants (SAAs) and different phospholipid-to-SAA ratios. The formulae were characterized regarding their entrapment efficiency percentage (EE%), particle size (PS), polydispersity index (PDI), zeta potential (ZP), and the amount of drug released after 6 hours (Q6h). Design Expert® software was employed to select the optimum formula. RESULTS: The optimum formula (TE14) had an EE% of 58.50%±1.30%, PS of 222.60±2.50 nm, PDI of 0.11±0.06, ZP of -20.80±0.30 mV, and Q6h of 67.40%±0.20%. In addition, TE14 was compared to transferosomes (TFs) in terms of elasticity and was found to show higher deformability index. Further, evaluation of ex vivo permeation using both rat and shed snake skin showed higher permeability of TE14 compared to TFs and OLM suspension. Confocal laser scanning microscopy confirmed the capability of the fluorolabeled TE14 to penetrate deep within the skin, while the histopathological study confirmed its safety. TE14 successfully maintained normal blood pressure values of rats up to 24 hours. Moreover, TE14 showed superiority in dermatokinetic study when compared with drug suspension. CONCLUSION: Taken together, the obtained results confirmed the potential of employing TEs as a successful carrier for the transdermal delivery of OLM.

Superparamagnetic Iron Oxide-Loaded Lipid Nanocarriers Incorporated in Thermosensitive In Situ Gel for Magnetic Brain Targeting of Clonazepam.

The objective of the study was to target clonazepam to the brain through the intranasal olfactory mucosa using nanolipid carriers loaded with superparamagnetic iron oxide nanoparticles (SPIONs) to allow nanocarrier guidance and retention with an external magnetic field. For improved delivery, the nanolipid carriers were incorporated in a thermosensitive mucoadhesive in situ gel. Different nanolipid carriers including solid lipid nanoparticles and nanostructured lipid carriers (NLC) were prepared and characterized with respect to particle size, zeta potential, entrapment efficiency, and in vitro release. The NLC composed of 3 solid lipids (Compritol® 888, stearic acid, and glyceryl monostearate) and 2 liquid oils (oleic acid and glyceryl monooleate) showed the most satisfactory characteristics and was loaded with SPION (NLC/SPION). Both formulae (NLC and NLC/SPION) were incorporated in an optimized thermosensitive mucoadhesive in situ system composed of 15% pluronic 127 and 0.75% sodium alginate and evaluated for the anticonvulsant action in chemically induced convulsive Swiss Albino mice. The treatment of animals with NLC/SPION significantly prolonged the onset times for convulsion and considerably protected the animals from death. One can thus hope for the emergence of a new intranasal treatment of epilepsy with consequent decrease in peripheral side effects of clonazepam.

Nanoemulsion-based electrolyte triggered in situ gel for ocular delivery of acetazolamide.

In the present work the antiglaucoma drug, acetazolamide, was formulated as an ion induced nanoemulsion-based in situ gel for ocular delivery aiming a sustained drug release and an improved therapeutic efficacy. Different acetazolamide loaded nanoemulsion formulations were prepared using peanut oil, tween 80 and/or cremophor EL as surfactant in addition to transcutol P or propylene glycol as cosurfactant. Based on physicochemical characterization, the nanoemulsion formulation containing mixed surfactants and transcutol P was selected to be incorporated into ion induced in situ gelling systems composed of gellan gum alone and in combination with xanthan gum, HPMC or carbopol. The nanoemulsion based in situ gels showed a significantly sustained drug release in comparison to the nanoemulsion. Gellan/xanthan and gellan/HPMC possessed good stability at all studied temperatures, but gellan/carbopol showed partial drug precipitation upon storage and was therefore excluded from the study. Gellan/xanthan and gellan/HPMC showed higher therapeutic efficacy and more prolonged intraocular pressure lowering effect relative to that of commercial eye drops and oral tablet. Gellan/xanthan showed superiority over gellan/HPMC in all studied parameters and is thus considered as a promising mucoadhesive nanoemulsion-based ion induced in situ gelling formula for topical administration of acetazolamide.

Nanodispersion-loaded mucoadhesive polymeric inserts for prolonged treatment of post-operative ocular inflammation.

Mucoadhesive polymeric films incorporated with ketorolac tromethamine-loaded nanodispersion aiming the sustained delivery of the drug to the cornea have been developed and characterised for the treatment of post-operative ocular inflammation. Nanodispersions were prepared by ionic gelation method with various concentrations of chitosan and sodium tripolyphosphate. The developed nanodispersions were analysed for morphology, particle size, dispersion homogeneity, zeta potential, entrapment efficiency and drug release. The nanodispersion that showed the smallest particle size and the highest entrapment efficiency was incorporated in optimised HPMC E15 and Eudragit RL100/HPMC K4m films. The formulation with optimum physicomechanical properties was selected to study its ex vivo transcorneal permeation through freshly excised bovine cornea in comparison with the nanodispersion and the marketed eye drops (Acular®). The polymeric ocular film showed greater permeation than aqueous eye drops. Moreover, the ocular film revealed a prolonged anti-inflammatory effect compared to eye drops when applied to inflamed rabbit's eyes.

Development and characterization of polymer-coated liposomes for vaginal delivery of sildenafil citrate.

Vaginal administration of sildenafil citrate has shown recently to develop efficiently the uterine lining with subsequent successful embryo implantation following in vitro fertilization. The aim of the present study was to develop sildenafil-loaded liposomes coated with bioadhesive polymers for enhanced vaginal retention and improved drug permeation. Three liposomal formulae were prepared by thin-film method using different phospholipid:cholesterol ratios. The optimal liposomal formulation was coated with bioadhesive polymers (chitosan and HPMC). A marked increase in liposomal size and zeta potential was observed for all coated liposomal formulations. HPMC-coated liposomes showed the greater bioadhesion and higher entrapment efficiency than chitosan-coated formulae. The in vitro release studies showed prolonged release of sildenafil from coated liposomes as compared to uncoated liposomes and sildenafil solution. Ex vivo permeation study revealed the enhanced permeation of coated relative to uncoated liposomes. Chitosan-coated formula demonstrated highest drug permeation and was thus selected for further investigations. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) confirmed the successful coating of the liposomes by chitosan. Histopathological in vivo testing proved the efficacy of chitosan-coated liposomes to improve blood flow to the vaginal endometrium and to increase endometrial thickness. Chitosan-coated liposomes can be considered as potential novel drug delivery system intended for the vaginal administration of sildenafil, which would prolong system's retention at the vaginal site and enhance the permeation of sildenafil to uterine blood circulation.

Ketoroloac tromethamine loaded nanodispersion incorporated into thermosensitive in situ gel for prolonged ocular delivery.

The present study was designed to improve the ocular availability of ketorolac tromethamine and to prolong its precorneal residence time for the treatment of postoperative ocular inflammation. Ketorolac tromethamine nanodispersions were successfully prepared by nanoprecipitation method using Eudragit(®) RL100. These nanodispersions were characterized in terms of particle size, zeta potential, entrapment efficiency and in vitro release. Consequently, the optimum nanodispersion was incorporated into thermosensitive in situ gel. The optimum gelling capacity was obtained by 20% Pluronic(®) F-127 and 14% Pluronic(®) F-127/1.5% HPMC K4m. The gelling temperature and gelation time of the in situ gels increased by decreasing the concentration of Pluronic(®) F-127. The mucoadhesive strength was significantly improved by the addition of HPMC. Incorporation of ketorolac tromethamine loaded nanodispersions into in situ gel bases sustained the release of ketorolac tromethamine, improved its ocular availability and prolonged its residence time without causing irritation to eye.

Photostabilization of sunscreen oil through preparation of a free-flowing powder.

Octyl-p-methoxycinnamate (OMC) is a sun-blocking agent that absorbs ultraviolet (UV) radiation in UVB range. However, when exposed to sunlight, OMC is converted into a less UV-absorbent form, which reduces its effectiveness. The aim of this study was to stabilize the oil by microencapsulation and to convert it into a free-flowing powder form. In addition, the study aimed to develop a suitable high-performance liquid chromatography method to detect the oil in the presence of its degradation product. OMC was microencapsulated by the congealable disperse-phase encapsulation using carnauba wax (cw) and beeswax (bw) at different wax-to-drug ratios (2:1 and 4:1). The photostability of the oil was investigated by exposing the microspheres to UV radiation. After 180 min of exposure, the photoprotective abilities of all the tested formulae were similar and reached about 82%. However, physicochemical assessment showed superiority of cw microspheres over their bw analogues.

Development and characterization of sponge-like acyclovir ocular minitablets.

For the treatment of ocular keratitis acyclovir, as a highly specific inhibitor of herpes virus replication, is applied topically into the eye. The objective of this study was to design and evaluate freeze-dried, bioadhesive and biodegredable acyclovir ocular minitablets for prolonged local drug action. The sponge-like nature of the lyophilized ocular minitablets ensures rapid hydration and gelation of these tablets in the eye and thus would reduce the foreign body sensation. The polymers used were sodium carboxymethylcellulose (NaCMC), hydroxypropylmethylcellulose (HPMC), xanthan gum, chitosan and Carbopol 943P. The minitablets were evaluated for drug content, weight variation, bioadhesion, water uptake and in vitro drug release. In addition, the rheological characteristics of the polymers solutions were investigated. Rheological data revealed that all tested polymers exhibited pseudoplastic behaviour which is required to minimize interference with blinking. Drug release was found to be affected by the type and concentration of polymer. The order of sustainment was chitosan > xanthan > HPMC > Carbopol > NaCMC. Water uptake study, dissolution rate of the polymers and viscosity measurements could explain the different release profiles of the drug from the polymers. Chitosan minitablet was chosen for its significant sustained release and good bioadhesive property for in vivo study in rabbits. The tablet showed a good permeation into the cornea in comparison to the commercially available Zovirax(®) eye ointment. In conclusion, chitosan ocular minitablets containing acyclovir could be considered as a promising sustained drug delivery system for ocular keratitis treatment.

Global transcriptome and deletome profiles of yeast exposed to transition metals.

A variety of pathologies are associated with exposure to supraphysiological concentrations of essential metals and to non-essential metals and metalloids. The molecular mechanisms linking metal exposure to human pathologies have not been clearly defined. To address these gaps in our understanding of the molecular biology of transition metals, the genomic effects of exposure to Group IB (copper, silver), IIB (zinc, cadmium, mercury), VIA (chromium), and VB (arsenic) elements on the yeast Saccharomyces cerevisiae were examined. Two comprehensive sets of metal-responsive genomic profiles were generated following exposure to equi-toxic concentrations of metal: one that provides information on the transcriptional changes associated with metal exposure (transcriptome), and a second that provides information on the relationship between the expression of approximately 4,700 non-essential genes and sensitivity to metal exposure (deletome). Approximately 22% of the genome was affected by exposure to at least one metal. Principal component and cluster analyses suggest that the chemical properties of the metal are major determinants in defining the expression profile. Furthermore, cells may have developed common or convergent regulatory mechanisms to accommodate metal exposure. The transcriptome and deletome had 22 genes in common, however, comparison between Gene Ontology biological processes for the two gene sets revealed that metal stress adaptation and detoxification categories were commonly enriched. Analysis of the transcriptome and deletome identified several evolutionarily conserved, signal transduction pathways that may be involved in regulating the responses to metal exposure. In this study, we identified genes and cognate signaling pathways that respond to exposure to essential and non-essential metals. In addition, genes that are essential for survival in the presence of these metals were identified. This information will contribute to our understanding of the molecular mechanism by which organisms respond to metal stress, and could lead to an understanding of the connection between environmental stress and signal transduction pathways.

Colon-specific drug delivery for mebeverine hydrochloride.

Mebeverine Hydrochloride (MB-HCl), an effective spasmolytic drug, was formulated as CODES. A colon-specific drug delivery technology CODES was designed to avoid the inherent problems associated with pH- or time-dependent systems. To achieve more protection and control of drug release, MB-HCl was prepared as microspheres and compressed as core tablets of CODES (modified CODES). The core tablets contained the drug either in free form [Formula 1 (F(1))], or as microspheres with 2 different polymer:drug:lactulose ratios (1:1:0.5 [Formula 2 (F(2))] and 2:1:0.5 [Formula 3 (F(3))]. The release profiles of the coated CODES systems were compared with uncoated compressed tablets. The uncoated tablet showed a drug release of 94% after 1 h in simulated gastric condition (pH = 1.2). The release characteristics of the coated systems revealed that the enteric coating (Eudragit L(100)) prevented any drug release in simulated gastric or duodenal conditions in the first 3 h (pH 1.2-6.1), after which drug was slightly liberated in simulated intestinal fluid (pH 7.4) {Phase 1 (P1)}. After 4 h the pH was adjusted to 7 and beta-glucose-oxidase was added, which is an enzyme produced by enterobacteria present in the colon. The acid-soluble coat (Eudragit)E(100)) dissolved and the drug release suddenly increased to reach 95, 72 and 60.4% for F(1)-F(3), respectively. IR spectrum study showed a covalent bond between the drug and the polymer in the formulae F(2) and F(3) resulting in the sustained drug release from the microspheres with a significant difference (p>0.05) to F(1). The findings were confirmed by in vivo investigation using X-ray images for Guinea pigs ingested tablets containing barium sulphate (F(4)), where the tablet began to disintegrate after 10 h of tablet intake. The results of the study indicated that MB-HCl CODES colon-specific drug delivery can act as a successful trigger for drug targeting in the colon. Furthermore, a sustained release of the drug can be achieved from modified CODES containing the drug in the form of microspheres.

The multiple biological roles of the 3'-->5' exonuclease of Saccharomyces cerevisiae DNA polymerase delta require switching between the polymerase and exonuclease domains.

Until recently, the only biological function attributed to the 3'-->5' exonuclease activity of DNA polymerases was proofreading of replication errors. Based on genetic and biochemical analysis of the 3'-->5' exonuclease of yeast DNA polymerase delta (Pol delta) we have discerned additional biological roles for this exonuclease in Okazaki fragment maturation and mismatch repair. We asked whether Pol delta exonuclease performs all these biological functions in association with the replicative complex or as an exonuclease separate from the replicating holoenzyme. We have identified yeast Pol delta mutants at Leu523 that are defective in processive DNA synthesis when the rate of misincorporation is high because of a deoxynucleoside triphosphate (dNTP) imbalance. Yet the mutants retain robust 3'-->5' exonuclease activity. Based on biochemical studies, the mutant enzymes appear to be impaired in switching of the nascent 3' end between the polymerase and the exonuclease sites, resulting in severely impaired biological functions. Mutation rates and spectra and synergistic interactions of the pol3-L523X mutations with msh2, exo1, and rad27/fen1 defects were indistinguishable from those observed with previously studied exonuclease-defective mutants of the Pol delta. We conclude that the three biological functions of the 3'-->5' exonuclease addressed in this study are performed intramolecularly within the replicating holoenzyme.

Cadmium is a mutagen that acts by inhibiting mismatch repair.

Most errors that arise during DNA replication can be corrected by DNA polymerase proofreading or by post-replication mismatch repair (MMR). Inactivation of both mutation-avoidance systems results in extremely high mutability that can lead to error catastrophe. High mutability and the likelihood of cancer can be caused by mutations and epigenetic changes that reduce MMR. Hypermutability can also be caused by external factors that directly inhibit MMR. Identifying such factors has important implications for understanding the role of the environment in genome stability. We found that chronic exposure of yeast to environmentally relevant concentrations of cadmium, a known human carcinogen, can result in extreme hypermutability. The mutation specificity along with responses in proofreading-deficient and MMR-deficient mutants indicate that cadmium reduces the capacity for MMR of small misalignments and base-base mismatches. In extracts of human cells, cadmium inhibited at least one step leading to mismatch removal. Together, our data show that a high level of genetic instability can result from environmental impediment of a mutation-avoidance system.

The influence of dilution of topical semisolid preparations on hydrocortisone permeation through excised human stratum corneum.

Dilution of semisolid preparations, in order to tailor the formulations to the needs of the patients, was thought to be associated with a number of dangers, one of which is the unpredictable alteration of activity. In the present study the influence of dilution on hydrocortisone permeation through excised human stratum corneum was investigated. The permeation profiles of hydrocortisone from various cream bases (diluted and undiluted) were found to be very similar with no significant differences. This result was in accordance with the lack of interaction between the tested bases and the structure of stratum corneum as shown by differential scanning calorimetry experiments. Thus, the permeability of stratum corneum, which was not affected by the cream bases, is the rate limiting step for drug permeation. However, it could be shown that dilution of Soventol cream (placebo with 1% hydrocortisone) which is known to contain isopropyl myristate as permeation enhancer reduces drug permeation. The reduced hydrocortisone permeation is believed to be due to reduced enhancer concentration.