RESUMEN
Nanomaterials like graphene and transition metal dichalcogenides are being explored for developing artificial photosensory synapses with low-power optical plasticity and high retention time for practical nervous system implementation. However, few studies are conducted on Tellurium (Te)-based nanomaterials due to their direct and small bandgaps. This paper reports the superior photo-synaptic properties of covalently bonded Tellurium sulfur oxide (TeSOx ) and Tellurium selenium oxide (TeSeOx )nanomaterials, which are fabricated by incorporating S and Se atoms on the surface of Te multiropes using vapor deposition. Unlike pure Te multiropes, the TeSOx and TeSeOx multiropes exhibit controllable temporal dynamics under optical stimulation. For example, the TeSOx multirope-based transistor displays a photosensory synaptic response to UV light (λ = 365 nm). Furthermore, the TeSeOx multirope-based transistor exhibits photosensory synaptic responses to UV-vis light (λ = 365, 565, and 660 nm), reliable electrical performance, and a combination of both photodetector and optical artificial synaptic properties with a maximum responsivity of 1500 AW-1 to 365 nm UV light. This result is among the highest reported for Te-heterostructure-based devices, enabling optical artificial synaptic applications with low voltage spikes (1 V) and low light intensity (21 µW cm-2 ), potentially useful for optical neuromorphic computing.
RESUMEN
Nanomaterials that can be easily processed into thin films are highly desirable for their wide range of applicability in electrical and optical devices. Currently, Te-based 2D materials are of interest because of their superior electrical properties compared to transition metal dichalcogenide materials. However, the large-scale manufacturing of these materials is challenging, impeding their commercialization. This paper reports on ultrathin, large-scale, and highly flexible Te and Te-metal nanorope films grown via low-power radiofrequency sputtering for a short period at 25 °C. Additionally, the feasibility of such films as transistor channels and flexible transparent conductive electrodes is discussed. A 20 nm thick Te-Ni-nanorope-channel-based transistor exhibits a high mobility (≈450 cm2 V-1 s-1 ) and on/off ratio (105 ), while 7 nm thick Te-W nanorope electrodes exhibit an extremely low haze (1.7%) and sheet resistance (30 Ω sq-1 ), and high transmittance (86.4%), work function (≈4.9 eV), and flexibility. Blue organic light-emitting diodes with 7 nm Te-W anodes exhibit significantly higher external quantum efficiencies (15.7%), lower turn-on voltages (3.2 V), and higher and more uniform viewing angles than indium-tin-oxide-based devices. The excellent mechanical flexibility and easy coating capability offered by Te nanoropes demonstrate their superiority over conventional nanomaterials and provide an effective outlet for multifunctional devices.
RESUMEN
Hybrid systems have attracted significant attention within the scientific community due to their multifunctionality, which has resulted in increasing demands for wearable electronics, green energy, and miniaturization. Furthermore, MXenes are promising two-dimensional materials that have been applied in various areas due to their unique properties. Herein, a flexible, transparent, and conductive electrode (FTCE) based on a multilayer hybrid MXene/Ag/MXene structure that can be applied to realize an inverted organic solar cell (OSC) with memory and learning functionalities is reported. This optimized FTCE exhibits high transmittance (84%), low sheet resistance (9.7 Ω sq-1 ), and reliable operation (even after 2000 bending cycles). Moreover, the OSC using this FTCE achieves a power conversion efficiency of 13.86% and sustained photovoltaic performance, even after hundreds of switching cycles. The fabricated memristive OSC (MemOSC) device also exhibits reliable resistive switching behavior at low operating voltages of 0.60 and -0.33 V (similar to biological synapses), an excellent ON/OFF ratio (103 ), stable endurance performance (4 × 103 ), and memory retention properties (104 s). Moreover, the MemOSC device can mimic synaptic functionalities on a biological time scale. Thus, MXene can potentially be used as an electrode for highly efficient OSCs with memristive functions for future intelligent solar cell modules.
RESUMEN
A novel device structure for thermally activated delayed fluorescence (TADF) top emission organic light-emitting diodes (TEOLEDs) that improves the viewing angle characteristics and reduces the efficiency roll-off is presented. Furthermore, we describe the design and fabrication of a cavity-suppressing electrode (CSE), Ag (12 nm)/WO3 (65 nm)/Ag (12 nm) that can be used as a transparent cathode. While the TADF-TEOLED fabricated using the CSE exhibits higher external quantum efficiency (EQE) and improved angular dependency than the device fabricated using the microcavity-based Ag electrode, it suffers from low color purity and severe efficiency roll-off. These drawbacks can be reduced by using an optimized multi-quantum well emissive layer (MQW EML). The CSE-based TADF-TEOLED with an MQW EML fabricated herein exhibits a high EQE (18.05%), high color purity (full width at half maximum ~ 59 nm), reduced efficiency roll-off (~ 46% at 1000 cd m-2), and low angular dependence. These improvements can be attributed to the synergistic effect of the CSE and MQW EML. An optimized transparent CSE improves charge injection and light outcoupling with low angular dependence, and the MQW EML effectively confines charges and excitons, thereby improving the color purity and EQE significantly. The proposed approach facilitates the optimization of multiple output characteristics of TEOLEDs for future display applications.