RESUMEN
Steel slag, abundantly available at a low cost and containing over 30 wt% silica, is an attractive precursor for producing high-surface-area mesoporous silica. By employing a two-stage dissolution-precipitation method using 1 M HCl and 1 M NaOH, we extracted pure SiO2, CaO, MgO, etc. from blast furnace slag (BFS). The water-soluble sodium silicate obtained was then used to synthesize mesoporous silica. The resulting silica had an average surface area of 100 m2 g-1 and a pore size distribution ranging from 4 to 20 nm. The mesoporous silica powder was further formed into beads and post-functionalized with polyethyleneimine (PEI) for cyclic CO2 capture from a mixture containing 15% CO2 in N2 at 75 °C. The silica-PEI bead was tested over 105 adsorption-desorption cycles, demonstrating an average CO2 capture capacity of 1 mmol g-1. This work presents a sustainable approach from steel slag to cost-effective mesoporous silica materials and making CO2 capture more feasible.
RESUMEN
Coinage metals Cu, Ag, and Au are essential for modern electronics and their recycling from waste materials is becoming increasingly important to guarantee the security of their supply. Designing new sustainable and selective procedures that would substitute currently used processes is crucial. Here, we describe an unprecedented approach for the sequential dissolution of single metals from Cu, Ag, and Au mixtures using biomass-derived ionic solvents and green oxidants. First, Cu can be selectively dissolved in the presence of Ag and Au with a choline chloride/urea/H2O2 mixture, followed by the dissolution of Ag in lactic acid/H2O2. Finally, the metallic Au, which is not soluble in either solution above, is dissolved in choline chloride/urea/Oxone. Subsequently, the metals were simply and quantitatively recovered from dissolutions, and the solvents were recycled and reused. The applicability of the developed approach was demonstrated by recovering metals from electronic waste substrates such as printed circuit boards, gold fingers, and solar panels. The dissolution reactions and selectivity were explored with different analytical techniques and DFT calculations. We anticipate our approach will pave a new way for the contemporary and sustainable recycling of multi-metal waste substrates.
RESUMEN
ortho-N-Substituted pyridinium cations with the weakly coordinating anion [B(C6F5)4]- have been studied and crucial structural features in the sp2 C-H borylation catalysis of 3-methylthiophene have been identified. The electron-deficiency of the aromatic core of the cation is essential for activity together with accessible protons. The spectroscopic yield of the borylation of 3-methylthiophene with catecholborane (CatBH) was optimized up to 86% and the method was further applied to other substrates such as N-alkylbenzenes. A mechanistic DFT study revealed the rate-limiting step in the catalysis to be the liberation of molecular H2 (ΔG = 27.5 kcal mol-1), whereas the overall reaction was found to be exergonic by 5.1 kcal mol-1.
RESUMEN
Porous organic polymers (POPs) and covalent organic frameworks (COFs) are hierarchical nano materials with variable applications. To our knowledge, this is the first report of a post-modified, non-renewable, DMSO-soluble M-POP/1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) upon atmospheric H2O/CO2 trapping after 48 h, forming a DBUH+·HCO3- adduct, as verified by solution carbon-13 nuclear magnetic resonance (13C NMR) spectroscopy. The success of the post-modification resulting from aldehyde enriched POPs was proven spectroscopically. The accessible functional group was reacted with excess monoethanolamine (MEA) resulting in the formation of M-POP. Away from CO2 physisorption, only few examples have been reported on the chemisorption process. One such example is the ethylene diamine-functionalized E-COF, capable of capturing CO2via carbamation. This was evidenced by several qualitative measurements including colorimetry and conductivity, which showed an unprecedented water solubility for a 2D COF material. The crystallinity of COFs as a result of post-modification was proven by powder X-ray diffraction (PXRD).
RESUMEN
Herein we report a modular synthetic method for the preparation of diaryl-substituted cyclohexenone acids starting from phenyl pyruvate and suitable enones. When the reaction is carried out in alkaline tert-butanol or toluene solutions in microwave-assisted conditions mainly anti configuration products are obtained with up to 86% isolated yield. However, when the reaction is carried out in alkaline water, a mixture of products with anti and syn conformations is obtained with up to 98% overall isolated yield. Mechanistically the product with anti conformation forms by a hemiketal-oxy-Cope type [3,3]-sigmatropic rearrangement-intramolecular aldol condensation route and syn product by an intermolecular aldol condensation-electrocyclization (disrotatory type) route.
RESUMEN
We report the use of dual nickel photocatalysis in the synthesis of O-aryl carbamates from aryl iodides or bromides, amines, and carbon dioxide. The reaction proceeded in visible light, at ambient carbon dioxide pressure, and without stoichiometric activating reagents. Mechanistic analysis is consistent with a Ni(I-III) cycle, where the active species is generated by the photocatalyst. The rate-limiting steps were the photocatalyst-mediated reduction of Ni(II) to Ni(I) and subsequent oxidative addition of the aryl halide. The physical properties of the photocatalyst were critical for promoting formation of O-aryl carbamates over various byproducts. Nine new phthalonitrile photocatalysts were synthesized, which exhibited properties that were vital to achieve high selectivity and activity.
RESUMEN
Noble metals exhibit broad arrange of applications in industry and several aspects of human life which are becoming more and more prevalent in modern times. Due to their limited sources and constantly and consistently expanding demand, recycling of secondary and waste materials must accompany the traditional mineral extractions. This Minireview covers the most recent solvometallurgical developments in regeneration of Pd, Pt, Rh, Ru, Ir, Os, Ag and Au with emphasis on sustainability and selectivity. Processing-by selective oxidative dissolution, reductive precipitation, solvent extraction, co-precipitation, membrane transfer and trapping to solid media-of eligible multi-metal substrates for recycling from waste printed circuit boards to end-of-life automotive catalysts are discussed. Outlook for possible future direction for noble metal recycling is proposed with emphasis on sustainable approaches.
RESUMEN
A series of organic compounds were successfully immobilized on an N-doped graphene quantum dot (N-GQD) to prepare a multifunctional organocatalyst for coupling reaction between CO2 and propylene oxide (PO). The simultaneous presence of halide ions in conjunction with acidic- and basic-functional groups on the surface of the nanoparticles makes them highly active for the production of propylene carbonate (PC). The effects of variables such as catalyst loading, reaction temperature, and structure of substituents are discussed. The proposed catalysts were characterized by different techniques, including Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy/energy dispersive X-ray microanalysis (FESEM/EDX), thermogravimetric analysis (TGA), elemental analysis, atomic force microscopy (AFM), and ultraviolet-visible (UV-Vis) spectroscopy. Under optimal reaction conditions, 3-bromopropionic acid (BPA) immobilized on N-GQD showed a remarkable activity, affording the highest yield of 98% at 140°C and 106 Pa without any co-catalyst or solvent. These new metal-free catalysts have the advantage of easy separation and reuse several times. Based on the experimental data, a plausible reaction mechanism is suggested, where the hydrogen bonding donors and halogen ion can activate the epoxide, and amine functional groups play a vital role in CO2 adsorption.
Asunto(s)
Carbono , Grafito , Nitrógeno , Dióxido de Carbono , Carbonatos , Compuestos EpoxiRESUMEN
Parahydrogen-induced polarization is a nuclear spin hyperpolarization technique that can provide strongly enhanced NMR signals for catalytic hydrogenation reaction products and intermediates. Among other matters, this can be employed to study the mechanisms of the corresponding chemical transformations. Commonly, noble metal complexes are used for reactions with parahydrogen. Herein, we present a PHIP study of metal-free imine hydrogenations catalyzed by the ansa-aminoborane catalyst QCAT. We discuss the reaction mechanism by showing the pairwise nature of the initial hydrogen activation step that leads to the formation of the negative net nuclear spin polarization of N-H hydrogen in the QCAT-H2 intermediate, enabling the further transfer of parahydrogen-originating protons to the imine substrate with the accumulation of hyperpolarized amine products. Parahydrogen-induced polarization also demonstrates the reversibility of the catalytic cycle.
RESUMEN
Ortho-phenylene-bridged phosphinoborane (2,6-Cl2 Ph)2 B-C6 H4 -PCy2 1 was synthesized in three steps from commercially available starting materials. 1 reacts with H2 or H2 O under mild conditions to form corresponding zwitterionic phosphonium borates 1-H2 or 1-H2 O. NMR studies revealed both reactions to be remarkably reversible. Thus, when exposed to H2 , 1-H2 O partially converts to 1-H2 even in the presence of multiple equivalents of water in the solution. The addition of parahydrogen to 1 leads to nuclear spin hyperpolarization both in dry and hydrous solvents, confirming the dissociation of 1-H2 O to free 1. These observations were supported by computational studies indicating that the formation of 1-H2 and 1-H2 O from 1 are thermodynamically favored. Unexpectedly, 1-H2 O can release molecular hydrogen to form phosphine oxide 1-O. Kinetic, mechanistic, and computational (DFT) studies were used to elucidate the unique "umpolung" water reduction mechanism.
RESUMEN
Here, we disclose a new copper(i)-Schiff base complex series for selective oxidation of primary alcohols to aldehydes under benign conditions. The catalytic protocol involves 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO), N-methylimidazole (NMI), ambient air, acetonitrile, and room temperature. This system provides a straightforward and rapid pathway to a series of Schiff bases, particularly, the copper(i) complexes bearing the substituted (furan-2-yl)imine bases N-(4-fluorophenyl)-1-(furan-2-yl)methanimine (L2) and N-(2-fluoro-4-nitrophenyl)-1-(furan-2-yl)methanimine (L4) have shown excellent yields. Both benzylic and aliphatic alcohols were converted to aldehydes selectively with 99% yield (in 1-2 h) and 96% yield (in 16 h). The mechanistic studies via kinetic analysis of all components demonstrate that the ligand type plays a key role in reaction rate. The basicity of the ligand increases the electron density of the metal center, which leads to higher oxidation reactivity. The Hammett plot shows that the key step does not involve H-abstraction. Additionally, a generalized additive model (GAM, including random effect) showed that it was possible to correlate reaction composition with catalytic activity, ligand structure, and substrate behavior. This can be developed in the form of a predictive model bearing in mind numerous reactions to be performed or in order to produce a massive data-set of this type of oxidation reaction. The predictive model will act as a useful tool towards understanding the key steps in catalytic oxidation through dimensional optimization while reducing the screening of statistically poor active catalysis.
RESUMEN
The oxido-bridged diiron(III) complex [Fe2(µ-O)(µ-OAc)(DPEAMP)2](OCH3) (1), based on a new unsymmetrical ligand with an N4O donor set, viz. [2-((bis(pyridin-2-ylmethyl)amino)methyl)-6-((ethylamino)methyl)-4-methylphenol (HDPEAMP)], has been prepared and characterized by spectroscopic methods and X-ray crystallography. The crystal structure of the complex reveals that each Fe(III) ion is coordinated by three nitrogen and three oxygen donors, two of which are the bridging oxido and acetate ligands. Employing H2O2 as a terminal oxidant, 1 is capable of oxidizing a number of alkanes and alkenes with high activity. The catalytic oxidation of 1,2-dimethylcyclohexane results in excellent retention of configuration. Monitoring of the reaction of 1 with H2O2 and acetic acid in the absence of substrate, using low-temperature UV-Vis spectroscopy, suggests the in situ formation of a transient Fe(III)2-peroxido species. While the selectivity and nature of oxidation products implicate a high-valent iron-oxido complex as a key intermediate, the low alcohol/ketone ratios suggest a simultaneous radical-based process.
Asunto(s)
Alcanos , Hierro , Alcanos/química , Alquenos , Catálisis , Cristalografía por Rayos X , Peróxido de Hidrógeno/química , Hierro/química , Ligandos , Oxidación-ReducciónRESUMEN
Gold is a scarce element in the Earth's crust but indispensable in modern electronic devices. New, sustainable methods of gold recycling are essential to meet the growing eco-social demand of gold. Here, we describe a simple, inexpensive, and environmentally benign dissolution of gold under mild conditions. Gold dissolves quantitatively in ethanol using 2-mercaptobenzimidazole as a ligand in the presence of a catalytic amount of iodine. Mechanistically, the dissolution of gold begins when I2 oxidizes Au0 and forms a [AuI I2 ]- species, which undergoes subsequent ligand-exchange reactions and forms a stable bis-ligand AuI complex. H2 O2 oxidizes free iodide and regenerated I2 returns back to the catalytic cycle. Addition of a reductant to the reaction mixture precipitates gold quantitatively and partially regenerates the ligand. We anticipate our work will open a new pathway to more sustainable metal recycling with the utilization of just catalytic amounts of reagents and green solvents.
RESUMEN
We report a Ti(OiPr)4-mediated multicomponent reaction, which produces 3,4-substituted cis-δ-lactones from alkyl magnesium chloride, benzaldehyde and CO2. The key intermediate, titanacyclopropane, is formed in situ from Ti(OiPr)4 and a Grignard reagent, which enables 1,2-dinucleophilic reactivity that is used to insert carbon dioxide and an aldehyde. An alternative reaction route is also described where a primary alkene is used to create the titanacyclopropane. A computational analysis of the elementary steps shows that the carbon dioxide and the aldehyde insertion proceeds through an inner-sphere mechanism. A variety of cis-butyrolactones can be synthesized with up to 7 : 1 diastereoselectivity and 77% yield.
RESUMEN
We report nuclear spin hyperpolarization of various alkenes achieved in alkyne hydrogenations with parahydrogen over a metal-free hydroborane catalyst (HCAT). Being an intramolecular frustrated Lewis pair aminoborane, HCAT utilizes a non-pairwise mechanism of H2 transfer to alkynes that normally prevents parahydrogen-induced polarization (PHIP) from being observed. Nevertheless, the specific spin dynamics in catalytic intermediates leads to the hyperpolarization of predominantly one hydrogen in alkene. PHIP enabled the detection of important HCAT-alkyne-H2 intermediates through substantial 1 H, 11 B and 15 N signal enhancement and allowed advanced characterization of the catalytic process.
RESUMEN
Invited for the cover of this issue is the group of Timo Repo at the University of Helsinki. The image depicts a ligand-exchange reaction as a battle between hummingbirds and golden birds, which represent two different thiol ligands. Read the full text of the article at 10.1002/chem.202101028.
Asunto(s)
Oro , Compuestos de Sulfhidrilo , Ligandos , SolubilidadRESUMEN
Development of new, environmentally benign dissolution methods for metallic gold is driven by needs in the circular economy. Gold is widely used in consumer electronics, but sustainable and selective dissolution methods for Au are scarce. Herein, we describe a quantitative dissolution of gold in organic solution under mild conditions by using hydrogen peroxide as an oxidant. In the dissolution reaction, two thiol ligands, pyridine-4-thiol and 2-mercaptobenzimidazole, work in a cooperative manner. The mechanistic investigations suggest that two pyridine-4-thiol molecules form a complex with Au0 that can be oxidized, whereas the role of inexpensive 2-mercaptobenzimidazole is to stabilize the formed AuI species through a ligand exchange process. Under optimized conditions, the reaction proceeds vigorously and gold dissolves quantitatively in two hours. The demonstrated ligand-exchange mechanism with two thiols allows to drastically reduce the thiol consumption and may lead to even more effective gold dissolution methods in the future.
RESUMEN
We report the heterolysis of molecular hydrogen under ambient conditions by the crystalline frustrated Lewis pair (FLP) 1-{2-[bis(pentafluorophenyl)boryl]phenyl}-2,2,6,6-tetramethylpiperidine (KCAT). The gas-solid reaction provides an approach to prepare the solvent-free, polycrystalline ion pair KCATH2 through a single crystal to single crystal transformation. The crystal lattice of KCATH2 increases in size relative to the parent KCAT by approximately 2%. Microscopy was used to follow the transformation of the highly colored red/orange KCAT to the colorless KCATH2 over a period of 2 h at 300 K under a flow of H2 gas. There is no evidence of crystal decrepitation during hydrogen uptake. Inelastic neutron scattering employed over a temperature range from 4-200 K did not provide evidence for the formation of polarized H2 in a precursor complex within the crystal at low temperatures and high pressures. However, at 300 K, the INS spectrum of KCAT transformed to the INS spectrum of KCATH2. Calculations suggest that the driving force is more favorable in the solid state compared to the solution or gas phase, but the addition of H2 into the KCAT crystal is unfavorable. Ab Initio methods were used to calculate the INS spectra of KCAT, KCATH2, and a possible precursor complex of H2 in the pocket between the B and N of crystalline KCAT. Ex-situ NMR showed that the transformation from KCAT to KCATH2 is quantitative and our results suggest that the hydrogen heterolysis process occurs via H2 diffusion into the FLP crystal with a rate-limiting movement of H2 from inactive positions to reactive sites.
RESUMEN
An in situ generated zinc ascorbate pre-catalyst for cyclic carbonate (CC) synthesis via CO2 coupling with epoxides under ambient conditions was reported. Spectroscopic measurements indicated that CO2 was inserted into the zinc ascorbate complex through the formation of an activated zinc carbonate catalyst upon abstracting the enediol protons with sodium hydride. The aliphatic diols were not activated under the applied conditions and did not interfere with either the process of cycloaddition or CO2 activation. The catalyst was active against different terminal epoxides, with a conversion of 75 and 85%, when propylene oxide and styrene oxide were used at 20 and 50 °C, respectively under 1 atm CO2 for 17 h, which was considered a good advancement for heterogeneous based catalysis. Moreover, green chemistry principles were applied to ultimately end up with more ecofriendly approaches for the synthesis of CC following a simple balloon technique. Herein, we used zinc as a sustainable metal, together with ascorbic acid as a bio-renewable material in addition to CO2 as a renewable feed-stock. Furthermore, waste prevention was achieved using the reaction side product, viz., NaBr as a co-catalyst.
RESUMEN
Organoboron compounds are essential reagents in modern C-C coupling reactions. Their synthesis via catalytic C-H borylation by main group elements is emerging as a powerful tool alternative to transition metal based catalysis. Herein, a straightforward metal-free synthesis of aryldifluoroboranes from BF3 and heteroarenes is reported. The reaction is assisted by sterically hindered amines and catalytic amounts of thioureas. According to computational studies the reaction proceeds via frustrated Lewis pair (FLP) mechanism. The obtained aryldifluoroboranes are further stabilized against destructive protodeborylation by converting them to the corresponding air stable tetramethylammonium organotrifluoroborates.