Biopolymers for Tissue Engineering: Crosslinking, Printing Techniques, and Applications.

Currently, tissue engineering has been dedicated to the development of 3D structures through bioprinting techniques that aim to obtain personalized, dynamic, and complex hydrogel 3D structures. Among the different materials used for the fabrication of such structures, proteins and polysaccharides are the main biological compounds (biopolymers) selected for the bioink formulation. These biomaterials obtained from natural sources are commonly compatible with tissues and cells (biocompatibility), friendly with biological digestion processes (biodegradability), and provide specific macromolecular structural and mechanical properties (biomimicry). However, the rheological behaviors of these natural-based bioinks constitute the main challenge of the cell-laden printing process (bioprinting). For this reason, bioprinting usually requires chemical modifications and/or inter-macromolecular crosslinking. In this sense, a comprehensive analysis describing these biopolymers (natural proteins and polysaccharides)-based bioinks, their modifications, and their stimuli-responsive nature is performed. This manuscript is organized into three sections: (1) tissue engineering application, (2) crosslinking, and (3) bioprinting techniques, analyzing the current challenges and strengths of biopolymers in bioprinting. In conclusion, all hydrogels try to resemble extracellular matrix properties for bioprinted structures while maintaining good printability and stability during the printing process.

Chemical Composition of Macroalgae Polysaccharides from Galician and Portugal Coasts: Seasonal Variations and Biological Properties.

Crude polysaccharides extracted from the Codium sp. and Osmundea sp. macroalgae collected in different seasons (winter, spring and summer) from the Galician and North Portugal coasts were characterised, aiming to support their biomedical application to wound healing. An increase in polysaccharides' sulphate content was registered from winter to summer, and higher values were obtained for Osmundea sp. In turn, the monosaccharide composition constantly changed with a decrease in glucose in Osmundea sp. from spring to winter. For Codium sp., a higher increase was noticed regarding glucose content in the Galician and Portugal coasts. Galactose was the major monosaccharide in all the samples, remaining stable in all seasons and collection sites. These results corroborate the sulphate content and antioxidant activity, since the Osmundea sp.-derived polysaccharides collected in summer exhibited higher scavenging radical ability. The biocompatibility and wound scratch assays revealed that the Osmundea sp. polysaccharide extracted from the Portugal coast in summer possessed more potential for promoting fibroblast migration. This study on seasonal variations of polysaccharides, sulphate content, monosaccharide composition and, consequently, biological properties provides practical guidance for determining the optimal season for algae harvest to standardise preparations of polysaccharides for the biomedical field.

Interaction of Near-Infrared (NIR)-Light Responsive Probes with Lipid Membranes: A Combined Simulation and Experimental Study.

Cancer is considered a major societal challenge for the next decade worldwide. Developing strategies for simultaneous diagnosis and treatment has been considered a promising tool for fighting cancer. For this, the development of nanomaterials incorporating prototypic near-infrared (NIR)-light responsive probes, such as heptamethine cyanines, has been showing very promising results. The heptamethine cyanine-incorporating nanomaterials can be used for a tumor's visualization and, upon interaction with NIR light, can also produce a photothermal/photodynamic effect with a high spatio-temporal resolution and minimal side effects, leading to an improved therapeutic outcome. In this work, we studied the interaction of 12 NIR-light responsive probes with lipid membrane models by molecular dynamics simulations. We performed a detailed characterization of the location, orientation, and local perturbation effects of these molecules on the lipid bilayer. Based on this information, the probes were divided into two groups, predicting a lower and higher perturbation of the lipid bilayer. From each group, one molecule was selected for testing in a membrane leakage assay. The experimental data validate the hypothesis that molecules with charged substituents, which function as two polar anchors for the aqueous phase while spanning the membrane thickness, are more likely to disturb the membrane by the formation of defects and pores, increasing the membrane leakage. The obtained results are expected to contribute to the selection of the most suitable molecules for the desired application or eventually guiding the design of probe modifications for achieving an optimal interaction with tumor cell membranes.

Three-Dimensionally Printed Hydrogel Cardiac Patch for Infarct Regeneration Based on Natural Polysaccharides.

Myocardial infarction is one of the more common cardiovascular diseases, and remains the leading cause of death, globally. Hydrogels (namely, those using natural polymers) provide a reliable tool for regenerative medicine and have become a promising option for cardiac tissue regeneration due to their hydrophilic character and their structural similarity to the extracellular matrix. Herein, a functional ink based on the natural polysaccharides Gellan gum and Konjac glucomannan has, for the first time, been applied in the production of a 3D printed hydrogel with therapeutic potential, with the goal of being locally implanted in the infarcted area of the heart. Overall, results revealed the excellent printability of the bioink for the development of a stable, porous, biocompatible, and bioactive 3D hydrogel, combining the specific advantages of Gellan gum and Konjac glucomannan with proper mechanical properties, which supports the simplification of the implantation process. In addition, the structure have positive effects on endothelial cells' proliferation and migration that can promote the repair of injured cardiac tissue. The results presented will pave the way for simple, low-cost, and efficient cardiac tissue regeneration using a 3D printed hydrogel cardiac patch with potential for clinical application for myocardial infarction treatment in the near future.

Animal-derived products in science and current alternatives.

More than fifty years after the 3Rs definition and despite the continuous implementation of regulatory measures, animals continue to be widely used in basic research. Their use comprises not only in vivo experiments with animal models, but also the production of a variety of supplements and products of animal origin for cell and tissue culture, cell-based assays, and therapeutics. The animal-derived products most used in basic research are fetal bovine serum (FBS), extracellular matrix proteins such as Matrigel™, and antibodies. However, their production raises several ethical issues regarding animal welfare. Additionally, their biological origin is associated with a high risk of contamination, resulting, frequently, in poor scientific data for clinical translation. These issues support the search for new animal-free products able to replace FBS, Matrigel™, and antibodies in basic research. In addition, in silico methodologies play an important role in the reduction of animal use in research by refining the data previously to in vitro and in vivo experiments. In this review, we depicted the current available animal-free alternatives in in vitro research.

Chemical composition, antioxidant, and antimicrobial activities of six commercial essential oils.

Essential oils (EOs) and their components extracted from medicinal and aromatic plants are used in several areas, such as perfumery and chemical, cosmetic, food, and pharmaceutical industries. Considering the different applications of EOs, this work aimed to screen the composition and the bioactivities properties of the EOs of Foeniculum vulgare, Helichrysum stoechas, Mentha pulegium, Pinus pinaster, Ruta graveolens, and Thymus mastichina. Gas chromatography-mass spectrometry revealed the presence of different compounds in EOs F. vulgare (12), H. stoechas (27), M. pulegium (8), P. pinaster (24), R. graveolens (8), and T. mastichina (16). All the EOs showed antioxidant activity acting through inhibition of lipid peroxidation, while only two EOs (H. stoechas and M. pulegium) scavenged the free radicals of DPPH. Mentha pulegium and T. mastichina EOs showed the strongest antimicrobial activity. Also, the effect on the fibroblast's viability was directly proportional to the EOs concentration, and the highest cytotoxic effect was registered with R. graveolens EO. The present study revealed significant bioactive properties of different EOs, highlighting M. pulegium and T. mastichina EOs to be considered in further studies for potential use in the food and pharmaceutical industries, due to their antioxidant and antimicrobial properties.

Silk Sericin: A Promising Sustainable Biomaterial for Biomedical and Pharmaceutical Applications.

Silk is a natural composite fiber composed mainly of hydrophobic fibroin and hydrophilic sericin, produced by the silkworm Bombyx mori. In the textile industry, the cocoons of B. mori are processed into silk fabric, where the sericin is substantially removed and usually discarded in wastewater. This wastewater pollutes the environment and water sources. However, sericin has been recognized as a potential biomaterial due to its biocompatibility, immunocompatibility, biodegradability, anti-inflammatory, antibacterial, antioxidant and photoprotective properties. Moreover, sericin can produce hydrogels, films, sponges, foams, dressings, particles, fibers, etc., for various biomedical and pharmaceutical applications (e.g., tissue engineering, wound healing, drug delivery, cosmetics). Given the severe environmental pollution caused by the disposal of sericin and its beneficial properties, there has been growing interest in upcycling this biomaterial, which could have a strong and positive economic, social and environmental impact.

Ciprofloxacin-Loaded Zein/Hyaluronic Acid Nanoparticles for Ocular Mucosa Delivery.

Bacterial conjunctivitis is a worldwide problem that, if untreated, can lead to severe complications, such as visual impairment and blindness. Topical administration of ciprofloxacin is one of the most common treatments for this infection; however, topical therapeutic delivery to the eye is quite challenging. To tackle this, nanomedicine presents several advantages compared to conventional ophthalmic dosage forms. Herein, the flash nanoprecipitation technique was applied to produce zein and hyaluronic acid nanoparticles loaded with ciprofloxacin (ZeinCPX_HA NPs). ZeinCPX_HA NPs exhibited a hydrodynamic diameter of <200 nm and polydispersity index of <0.3, suitable for ocular drug delivery. In addition, the freeze-drying of the nanoparticles was achieved by using mannitol as a cryoprotectant, allowing their resuspension in water without modifying the physicochemical properties. Moreover, the biocompatibility of nanoparticles was confirmed by in vitro assays. Furthermore, a high encapsulation efficiency was achieved, and a release profile with an initial burst was followed by a prolonged release of ciprofloxacin up to 24 h. Overall, the obtained results suggest ZeinCPX_HA NPs as an alternative to the common topical dosage forms available on the market to treat conjunctivitis.

Single-Step Self-Assembly of Zein-Honey-Chitosan Nanoparticles for Hydrophilic Drug Incorporation by Flash Nanoprecipitation.

Zein- and chitosan-based nanoparticles have been described as promising carrier systems for food, biomedical and pharmaceutical applications. However, the manufacture of size-controlled zein and chitosan particles is challenging. In this study, an adapted anti-solvent nanoprecipitation method was developed. The effects of the concentration of zein and chitosan and the pH of the collection solution on the properties of the zein-honey-chitosan nanoparticles were investigated. Flash nanoprecipitation was demonstrated as a rapid, scalable, single-step method to achieve the self-assembly of zein-honey-chitosan nanoparticles. The nanoparticles size was tuned by varying certain formulation parameters, including the total concentration and ratio of the polymers. The zein-honey-chitosan nanoparticles' hydrodynamic diameter was below 200 nm and the particles were stable for 30 days. Vitamin C was used as a hydrophilic model substance and efficiently encapsulated into these nanoparticles. This study opens a promising pathway for one-step producing zein-honey-chitosan nanoparticles by flash nanoprecipitation for hydrophilic compounds' encapsulation.

Thymus zygis Essential Oil: Phytochemical Characterization, Bioactivity Evaluation and Synergistic Effect with Antibiotics against Staphylococcus aureus.

Staphylococcus aureus is a nosocomial bacterium causing different infectious diseases, ranging from skin and soft-tissue infections to more serious and life-threatening infections such as sepsis, meningitis and endocarditis, which may be exacerbated by antibiotic resistance. Plant products may be seen as an alternative as antibacterial agents, namely, against S. aureus. Thus, the aim of this work was to characterize the chemical composition and evaluate the bioactive properties of the T. zygis essential oil (EO), with a focus on antimicrobial activity against S. aureus. Gas chromatography coupled with mass spectrometry was used to assess the chemical composition of the T. zygis EO, and the antioxidant activity was evaluated using the DPPH method and ß-carotene-bleaching assay. The antimicrobial activity against S. aureus strains, the interaction with different antibiotics and the attenuation of this bacterium's virulence were evaluated. The T. zygis EO showed antioxidant activity acting through two different mechanisms and antibacterial activity against S. aureus, with antibiofilm and antihaemolytic properties. This EO also demonstrated synergistic or additive interactions in combination with ampicillin, ciprofloxacin or vancomycin against S. aureus strains and, in some cases, changed the antibiotic-resistance phenotype from resistant to susceptible. Therefore, the present work demonstrates the good bioactive properties of the EO of T. zygis, mainly the antimicrobial activity against S. aureus, revealing its potential to be used as an antibacterial agent.

Osmundea sp. macroalgal polysaccharide-based nanoparticles produced by flash nanocomplexation technique.

The macroalgae-derived polysaccharides' biological potential has been explored due to their attractive intrinsic properties such as biocompatibility, biodegradability, and their ability to conjugate with other compounds. In particular, in the drug delivery systems field, the anionic macroalgae polysaccharides have been combined with cationic compounds through ionotropic gelation and/or bulk mixing. However, these techniques did not assure reproducibility, and the stability of nanoparticles is undesired. To overcome these limitations, herein, the polysaccharide extracted from Osmundea sp. was used to produce nanoparticles through the flash nanocomplexation technique. This approach rapidly mixed the negative charge of macroalgae polysaccharide with a positive chitosan charge on a millisecond timescale. Further, diclofenac (an anti-inflammatory drug) was also incorporated into complex nanoparticles. Overall, the gathered data showed that hydrodynamic diameter nanoparticles values lower than 100 nm, presenting a narrow size distribution and stability. Also, the diclofenac exhibited a targeted and sustained release profile in simulating inflammatory conditions. Likewise, the nanoparticles showed excellent biological properties, evidencing their suitability to be used to treat inflammatory skin diseases.

Oromucosal Alginate Films with Zein Nanoparticles as a Novel Delivery System for Digoxin.

Digoxin is a hydrophobic drug used for the treatment of heart failure that possesses a narrow therapeutic index, which raises safety concerns for toxicity. This is of utmost relevance in specific populations, such as the elderly. This study aimed to demonstrate the potential of the sodium alginate films as buccal drug delivery system containing zein nanoparticles incorporated with digoxin to reduce the number of doses, facilitating the administration with a quick onset of action. The film was prepared using the solvent casting method, whereas nanoparticles by the nanoprecipitation method. The nanoparticles incorporated with digoxin (0.25 mg/mL) exhibited a mean size of 87.20 ± 0.88 nm, a polydispersity index of 0.23 ± 0.00, and a zeta potential of 21.23 ± 0.07 mV. Digoxin was successfully encapsulated into zein nanoparticles with an encapsulation efficiency of 91% (±0.00). Films with/without glycerol and with different concentrations of ethanol were produced. The sodium alginate (SA) films with 10% ethanol demonstrated good performance for swelling (maximum of 1474%) and mechanical properties, with a mean tensile strength of 0.40 ± 0.04 MPa and an elongation at break of 27.85% (±0.58), compatible with drug delivery application into the buccal mucosa. The current study suggests that SA films with digoxin-loaded zein nanoparticles can be an effective alternative to the dosage forms available on the market for digoxin administration.

Solvent-Free Microwave Extraction of Thymus mastichina Essential Oil: Influence on Their Chemical Composition and on the Antioxidant and Antimicrobial Activities.

Solvent-free microwave extraction (SFME) is a combination of microwave heating and dry distillation performed at atmospheric pressure without the addition of water or organic solvents that has been proposed as a green method for the extraction of essential oils from aromatic and medicinal herbs. In this work, SFME and the conventional techniques of steam distillation (SD) and hydrodistillation (HD) were compared with respect to the extraction and antioxidant and antimicrobial activities of Thymus mastichina essential oil. The main constituent of essential oils obtained using different methods was 1,8-cineole (eucalyptol). The results showed that the essential oils extracted by means of SFME in 30 min were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained using conventional HD over 120 min. In addition, SFME generates less waste and less solvent, consumes less energy, and provides a higher yield for a shorter extraction time, which is advantageous for the extraction of the T. mastichina essential oil compared to SD. The antioxidant and antimicrobial activities of the T. mastichina essential oil obtained from either SFME or conventional extraction methods (SD or HD) showed a similar pattern. Large-scale experiments using this SFME procedure showed a potential industrial application.

Lyoprotective Effects of Mannitol and Lactose Compared to Sucrose and Trehalose: Sildenafil Citrate Liposomes as a Case Study.

The lyoprotective effects of mannitol and lactose have been evaluated in the production of sildenafil citrate liposomes. Liposomes were prepared by mixing the components under ultrasonic agitation, followed by a transmembrane pH gradient for remote drug loading. Mannitol and lactose, as compared to sucrose and trehalose, were used as the stabilizing agents, and different freeze-drying cycles were assayed. The remaining moisture and the thermal characteristics of the lyophilized samples were analyzed. Size, entrapment efficiency, biocompatibility, and cell internalization of original and rehydrated liposomes were compared. The type of additive did not affect the biocompatibility or cell internalization, but did influence other liposome attributes, including the thermal characteristics and the remaining moisture of the lyophilized samples. A cut-off of 5% (w/w) remaining moisture was an indicator of primary drying completion-information useful for scaling up and transfer from laboratory to large-scale production. Lactose increased the glass transition temperature to over 70 °C, producing lyoprotective effects similar to those obtained with sucrose. Based on these results, formulations containing liposomes lyophilized with lactose meet the FDA's requirements and can be used as a biocompatible and biodegradable vehicle for the pulmonary delivery of therapeutic doses of sildenafil citrate.

Biochemical characterization of Nostoc sp. exopolysaccharides and evaluation of potential use in wound healing.

Exopolysaccharides (EPS) produced by cyanobacteria are complex biomolecules of anionic nature with potential biomedical applications. In this study, the EPS produced by the Nostoc sp. strains PCC7936 and PCC7413 were characterized and evaluated as a biomaterial for new wound dressings. The addition of acetate ions to the culture medium slightly stimulated EPS production, achieving 1463.1 ± 16.0 mgL-1 (PCC7413) and 1372.1 ± 29.0 mgL-1 (PCC7936). Both EPS presented nine monosaccharide residues and a MW > 1000 kDa. The acetate addition changed the monosaccharide molar percentages. FTIR and DLS results confirmed the anionic nature and the presence of sulfate groups in both EPS, which are determinant features for biomedical applications. Both EPS at 1%(w/v) formed gels in the presence of 0.4%(w/v) FeCl3. Results obtained for MTT assay and wound healing in vitro scratch assay revealed hydrogels biocompatibility and ability to promote fibroblast migration and proliferation that was greater in PCC7936. The Nostoc EPS hydrogels presented promising properties to be applied in the treatment of skin injuries.

Thymus mastichina: Composition and Biological Properties with a Focus on Antimicrobial Activity.

Thymus mastichina has the appearance of a semishrub and can be found in jungles and rocky lands of the Iberian Peninsula. This work aimed to review and gather available scientific information on the composition and biological properties of T. mastichina. The main constituents of T. mastichina essential oil are 1,8-cineole (or eucalyptol) and linalool, while the extracts are characterized by the presence of flavonoids, phenolic acids, and terpenes. The essential oil and extracts of T. mastichina have demonstrated a wide diversity of biological activities. They showed antibacterial activity against several bacteria such as Escherichia coli, Proteus mirabilis, Salmonella subsp., methicillin-resistant and methicillin-sensitive Staphylococcus aureus, Listeria monocytogenes EGD, Bacillus cereus, and Pseudomonas, among others, and antifungal activity against Candida spp. and Fusarium spp. Additionally, it has antioxidant activity, which has been evaluated through different methods. Furthermore, other activities have also been studied, such as anticancer, antiviral, insecticidal, repellent, anti-Alzheimer, and anti-inflammatory activity. In conclusion, considering the biological activities reported for the essential oil and extracts of T. mastichina, its potential as a preservative agent could be explored to be used in the food, cosmetic, or pharmaceutical industries.

Xanthan Gum-Konjac Glucomannan Blend Hydrogel for Wound Healing.

Hydrogels are considered to be the most ideal materials for the production of wound dressings since they display a three-dimensional structure that mimics the native extracellular matrix of skin as well as a high-water content, which confers a moist environment at the wound site. Until now, different polymers have been used, alone or blended, for the production of hydrogels aimed for this biomedical application. From the best of our knowledge, the application of a xanthan gum-konjac glucomannan blend has not been used for the production of wound dressings. Herein, a thermo-reversible hydrogel composed of xanthan gum-konjac glucomannan (at different concentrations (1% and 2% w/v) and ratios (50/50 and 60/40)) was produced and characterized. The obtained data emphasize the excellent physicochemical and biological properties of the produced hydrogels, which are suitable for their future application as wound dressings.

Lyophilized tablets for focal delivery of fluconazole and itraconazole through vaginal mucosa, rational design and in vitro evaluation.

The present work deals with the rational design and in vitro evaluation of vaginal tablets for focal delivery of fluconazole (FLZ) and itraconazol (ITZ). Drug loaded liposomes with and without d-alpha-tocopheryl polyethylene glycol 1000 succinate (vit E TPGS) were prepared by direct sonication of the components and mixed with albumin to obtain albusomes. Tablets were obtained by direct compression of the lyophilized cake. The influence of vit E TPGS on size, zeta potential and entrapment efficiency (EE%) of liposomes and albusomes was evaluated. Tablet swelling and drug release were studied by in vitro assays. Vit E TPGS neither affected the zeta potential nor the EE% of liposomes and albusomes, but affected the liposomes size and the tablet disintegration time. A rapid erosion was observed for the tablets with the highest content of vitamin, while a slow swelling for those lacking the vitamin (swelling index = 57.76 ±â€¯13.51%). A faster drug release profile was obtained for the former compared to the latter. The in vitro assay showed that FLZ diffused and solved in the vaginal fluid simulant while ITZ remained into the albusomes, which slowly released ITZ-albumin complex and ITZ-loaded liposomes, both suitable carriers for drug transport to deeper vaginal endothelium.

Electrospun polymeric nanofibres as wound dressings: A review.

Skin wounds have significant morbidity and mortality rates associated. This is explained by the limited effectiveness of the currently available treatments, which in some cases do not allow the reestablishment of the structure and functions of the damaged skin, leading to wound infection and dehydration. These drawbacks may have an impact on the healing process and ultimately prompt patients' death. For this reason, researchers are currently developing new wound dressings that enhance skin regeneration. Among them, electrospun polymeric nanofibres have been regarded as promising tools for improving skin regeneration due to their structural similarity with the extracellular matrix of normal skin, capacity to promote cell growth and proliferation and bactericidal activity as well as suitability to deliver bioactive molecules to the wound site. In this review, an overview of the recent studies concerning the production and evaluation of electrospun polymeric nanofibrous membranes for skin regenerative purposes is provided. Moreover, the current challenges and future perspectives of electrospun nanofibrous membranes suitable for this biomedical application are highlighted.

Recent advances on antimicrobial wound dressing: A review.

Skin and soft tissue infections (SSTIs) have high rates of morbidity and mortality associated. Despite the successful treatment of some SSTIs, those affecting the subcutaneous tissue, fascia, or muscle delay the healing process and can lead to life-threatening conditions. Therefore, more effective treatments are required to deal with such pathological situations. Recently, wound dressings loaded with antimicrobial agents emerged as viable options to reduce wound bacterial colonization and infection, in order to improve the healing process. In this review, an overview of the most prominent antibacterial agents incorporated in wound dressings along with their mode of action is provided. Furthermore, the recent advances in the therapeutic approaches used in the clinic and some future perspectives regarding antibacterial wound dressings are also discussed.