RESUMEN
Medium- and high-entropy alloys are an emerging class of materials that can exhibit outstanding combinations of strength and ductility for engineering applications. Computational simulations have suggested the presence of short-range order (SRO) in these alloys, and recent experimental evidence is also beginning to emerge. Unfortunately, the difficulty in quantifying the SRO under different heat treatment conditions has generated much debate on the atomic preferencing and implications of SRO on mechanical properties. Here we develop an approach to measure SRO using atom probe tomography. This method balances the limitations of atom probe tomography with the threshold values of SRO to map the regimes where the required atomistic neighbourhood information is preserved and where it is not. We demonstrate the method with a case study of the CoCrNi alloy and use this to monitor SRO changes induced by heat treatments. These species-specific SRO measurements enable the generation of computational simulations of atomic neighbourhood models that are equivalent to the experiment and can contribute to the further understanding and design of medium- and high-entropy alloys and other materials systems where SRO may occur.
RESUMEN
Phase instability poses a serious challenge to the commercialization of formamidinium lead iodide (FAPbI3)-based solar cells and optoelectronic devices. Here, we combine density functional theory and machine learning molecular dynamics simulations, to investigate the mechanism driving the undesired α-δ phase transition of FAPbI3. Prevalent iodine vacancies and interstitials can significantly expedite the structural transition kinetics by inducing robust covalency during transition states. Extrinsically, the detrimental roles of atmospheric moisture and oxygen in degrading the FAPbI3 perovskite phase are also rationalized. Significantly, we discover the compositional design principles by categorizing that A-site engineering primarily governs thermodynamics, whereas B-site doping can effectively manipulate the kinetics of the phase transition in FAPbI3, highlighting lanthanide ions as promising B-site substitutes. A-B mixed doping emerges as an efficient strategy to synergistically stabilize α-FAPbI3, as experimentally demonstrated by substantially higher initial optoelectronic characteristics and significantly enhanced phase stability in Cs-Eu doped FAPbI3 as compared to its Cs-doped counterpart. This study provides scientific guidance for the design and optimization of long-term stable FAPbI3-based solar cells and other optoelectronic devices through defect control and synergetic composition engineering.
RESUMEN
High-magnetization materials play crucial roles in various applications. However, the past few decades have witnessed a stagnation in the discovery of new materials with high magnetization. In this work, Ni/NiO nanocomposites are fabricated by depositing Ni and NiO thin layers alternately, followed by annealing at specific temperatures. Both the as-deposited samples and those annealed at 373 K exhibit low magnetization. However, the samples annealed at 473 K exhibit a significantly enhanced saturation magnetization exceeding 607 emu cm-3 at room temperature, surpassing that of pure Ni (480 emu cm-3 ). Material characterizations indicate that the composite comprises NiO nanoclusters of size 1-2 nm embedded in the Ni matrix. This nanoclustered NiO is primarily responsible for the high magnetization, as confirmed by density functional theory calculations. The calculations also indicate that the NiO clusters are ferromagnetically coupled with Ni, resulting in enhanced magnetization. This work demonstrates a new route toward developing artificial high-magnetization materials using the high magnetic moments of nanoclustered antiferromagnetic materials.
RESUMEN
The CAMECA Invizo 6000 atom probe microscope uses ion optics that differ significantly from the local electrode atom probe (LEAP). It uses dual antiparallel deep ultraviolet lasers, a flat counter electrode, and a series of accelerating and decelerating lenses to increase the field-of-view of the specimen without reducing the mass resolving power. In this work we characterise the performance of the Invizo 6000 using three material case studies: a model Al-Mg-Si alloy, a commercially-available Ni-based superalloy, and a Zr alloy, using a combination of air and vacuum-transfer between instruments. The ion optics of the Invizo 6000 significantly increase the field-of-view compared to the same specimen on a LEAP 4000 X Si. We also observe a significant increase in specimen yield, especially for the Zr alloy. These results combine to make the Invizo 6000 well-suited to research projects requiring large analysis volumes, particularly so for traditionally difficult samples such as oxides.
RESUMEN
Pair distribution function (PDF) analysis is a powerful technique to understand atomic scale structure in materials science. Unlike X-ray diffraction (XRD)-based PDF analysis, the PDF calculated from electron diffraction patterns (EDPs) using transmission electron microscopy can provide structural information from specific locations with high spatial resolution. The present work describes a new software tool for both periodic and amorphous structures that addresses several practical challenges in calculating the PDF from EDPs. The key features of this program include accurate background subtraction using a nonlinear iterative peak-clipping algorithm and automatic conversion of various types of diffraction intensity profiles into a PDF without requiring external software. The present study also evaluates the effect of background subtraction and the elliptical distortion of EDPs on PDF profiles. The EDP2PDF software is offered as a reliable tool to analyse the atomic structure of crystalline and non-crystalline materials.
RESUMEN
Titanium alloys are advanced lightweight materials, indispensable for many critical applications1,2. The mainstay of the titanium industry is the α-ß titanium alloys, which are formulated through alloying additions that stabilize the α and ß phases3-5. Our work focuses on harnessing two of the most powerful stabilizing elements and strengtheners for α-ß titanium alloys, oxygen and iron1-5, which are readily abundant. However, the embrittling effect of oxygen6,7, described colloquially as 'the kryptonite to titanium'8, and the microsegregation of iron9 have hindered their combination for the development of strong and ductile α-ß titanium-oxygen-iron alloys. Here we integrate alloy design with additive manufacturing (AM) process design to demonstrate a series of titanium-oxygen-iron compositions that exhibit outstanding tensile properties. We explain the atomic-scale origins of these properties using various characterization techniques. The abundance of oxygen and iron and the process simplicity for net-shape or near-net-shape manufacturing by AM make these α-ß titanium-oxygen-iron alloys attractive for a diverse range of applications. Furthermore, they offer promise for industrial-scale use of off-grade sponge titanium or sponge titanium-oxygen-iron10,11, an industrial waste product at present. The economic and environmental potential to reduce the carbon footprint of the energy-intensive sponge titanium production12 is substantial.
RESUMEN
Oxygen ingression has been shown to substantially decrease the carrier lifetime of Sn-based perovskites, behind which the mechanism remains yet unknown. Our first-principles calculations reveal that in prototypical MASnI3 (MA = CH3NH3), oxygen by itself is not a recombination center. Instead, it tends to form substitutional OI through combining with native I vacancies (VI) and remarkably increases the original recombination rate of VI by 2-3 orders of magnitude. This rationalizes the experimentally observed sharp decline of carrier lifetime in perovskites exposed to air. The significantly enhanced carrier recombination is due to a smaller electron capture barrier of OI, resulting from lattice strengthening and the suppressed structural relaxation upon electron capture. These insights offer a route to further improve device performance via anion engineering in broad Sn-based perovskite optoelectronics operating in ambient air. Moreover, our results highlight the important role of lattice relaxation for nonradiative carrier capture in materials in general.
RESUMEN
Domain walls (DWs) in ferroelectric materials are interfaces that separate domains with different polarizations. Charged domain walls (CDWs) and neutral domain walls are commonly classified depending on the charge state at the DWs. CDWs are particularly attractive as they are configurable elements, which can enhance field susceptibility and enable functionalities such as conductance control. However, it is difficult to achieve CDWs in practice. Here, we demonstrate that applying mechanical stress is a robust and reproducible approach to generate CDWs. By mechanical compression, CDWs with a head/tail-to-body configuration were introduced in ultrathin BaTiO3, which was revealed by in-situ transmission electron microscopy. Finite element analysis shows strong strain fluctuation in ultrathin BaTiO3 under compressive mechanical stress. Molecular dynamics simulations suggest that the strain fluctuation is a critical factor in forming CDWs. This study provides insight into ferroelectric DWs and opens a pathway to creating CDWs in ferroelectric materials.
RESUMEN
The operating temperature is a critical parameter in atom probe tomography experiments. It affects the spatial precision, mass resolving power and other key aspects of the field-evaporation process. Current commercially available atom probes operate at a minimum temperature of â¼25â¯K when measured at the specimen. In this paper, we explore and implement changes to the mechanical design of both the LEAPâ and EIKOS™ atom probe microscope systems manufactured by CAMECAâ to enable a specimen temperature in the sub-10â¯K regime. We use these modified instruments to analyze four materials systems: pure Al (in both pulsed-voltage and pulsed-laser mode), pure W (pulsed-voltage mode only), doped Si, and GaN (pulsed-laser mode only). The effects of conducting atom probe experiments in the sub-10â¯K regime were assessed with reference to a range of quantitative analysis metrics related to spatial precision, mass resolving power, stoichiometry and charge-state ratio. We demonstrate that the spatial precision is significantly improved with decreasing temperature, whilst the effect on mass resolving power is relatively minor. The enhanced spatial precision is significant insofar as it enables lattice planes from the doped Si samples to be resolved. Furthermore, mass spectral analysis, lower noise floors and changes in the field evaporation process enabled more accurate GaN compositional measurements. We discuss the significance of these findings for the semiconductor and metallurgical industries and the potential opportunities for further investigations of this parameter space.
RESUMEN
Formamidinium lead triiodide (FAPbI3) currently holds the record conversion efficiency in the single-junction perovskite solar cell. Iodine management is known to be essential to suppress defect-induced nonradiative losses in FAPbI3 active layers. However, the origin of nonradiative losses and the underlying mechanism of suppressing such losses by iodine-concentration management remain unknown. Here, through first-principles simulation, we demonstrate that native point defects are not responsible for the nonradiative losses in FAPbI3. Instead, hydrogen ions, which can be abundant under both iodine-rich and iodine-poor conditions in FAPbI3, act as efficient nonradiative recombination centers and are proposed to be responsible for the suppressed power conversion efficiency. Moreover, iodine-moderate synthesis conditions can favor the formation of electrically inactive molecular hydrogen, which can dramatically suppress the detrimental hydrogen ions. This work identifies the dominant nonradiative recombination centers in the widely used FAPbI3 layers and rationalizes how the prevailing iodine management reduces the nonradiative losses. Minimizing the unintentional hydrogen incorporation in the perovskite is critical for achieving high device performance.
RESUMEN
Plastic deformation in ceramic materials is normally only observed in nanometre-sized samples. However, we have observed high levels of plasticity (>50% plastic strain) and excellent elasticity (6% elastic strain) in perovskite oxide Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3, under compression along <100>pc pillars up to 2.1 µm in diameter. The extent of this deformation is much higher than has previously been reported for ceramic materials, and the sample size at which plasticity is observed is almost an order of magnitude larger. Bending tests also revealed over 8% flexural strain. Plastic deformation occurred by slip along {110} <1[Formula: see text]0 > . Calculations indicate that the resulting strain gradients will give rise to giant flexoelectric polarization. First principles models predict that a high concentration of oxygen vacancies weaken the covalent/ionic bonds, giving rise to the unexpected plasticity. Mechanical testing on oxygen vacancies-rich Mn-doped Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb2/3)O3-PbTiO3 confirmed this prediction. These findings will facilitate the design of plastic ceramic materials and the development of flexoelectric-based nano-electromechanical systems.
RESUMEN
Hydroxyapatite nanoparticles (HAP NPs) are important for medicine, bioengineering, catalysis, and water treatment. However, current understanding of the nanoscale phenomena that confer HAP NPs their many useful properties is limited by a lack of information about the distribution of the atoms within the particles. Atom probe tomography (APT) has the spatial resolution and chemical sensitivity for HAP NP characterization, but difficulties in preparing the required needle-shaped samples make the design of these experiments challenging. Herein, two techniques are developed to encapsulate HAP NPs and prepare them into APT tips. By sputter-coating gold or the atomic layer deposition of alumina for encapsulation, partially fluoridated HAP NPs are successfully characterized by voltage- or laser-pulsing APT, respectively. Analyses reveal that significant tradeoffs exist between encapsulant methods/materials for HAP characterization and that selection of a more robust approach will require additional technique development. This work serves as an essential starting point for advancing knowledge about the nanoscale spatiochemistry of HAP NPs.
Asunto(s)
Composición de Medicamentos/instrumentación , Hidroxiapatitas/química , Tomografía/métodos , Óxido de Aluminio/química , Oro/química , Nanopartículas , Tamaño de la PartículaRESUMEN
Thermal annealing temperature and time dictate the microstructure of semiconductor materials such as silicon nanocrystals (Si NCs). Herein, atom probe tomography (APT) and density functional theory (DFT) calculations are used to understand the thermal annealing temperature effects on Si NCs grown in a SiO2matrix and the distribution behaviour of boron (B) and phosphorus (P) dopant atoms. The APT results demonstrate that raising the annealing temperature promotes growth and increased P concentration of the Si NCs. The data also shows that the thermal annealing does not promote the incorporation of B atoms into Si NCs. Instead, B atoms tend to locate at the interface between the Si NCs and SiO2matrix. The DFT calculations support the APT data and reveal that oxygen vacancies regulate Si NC growth and dopant distribution. This study provides the detailed microstructure of p-type, intrinsic, and n-type Si NCs with changing annealing temperature and highlights how B and P dopants preferentially locate with respect to the Si NCs embedded in the SiO2matrix with the aid of oxygen vacancies. These findings will be useful towards future optoelectronic applications.
RESUMEN
Revealing the position of materials with chemical selectivity at atomic scale within functional nanoparticles is essential to understand and control their performance and cutting-edge atom probe tomography is a powerful tool to undertake this task. In this paper, we demonstrate three effective methods to prepare the needle-shaped specimens required for atom probe tomography measurements from nanoparticles of different sizes and provide examples of how atom probe can be used to provide data that is critical to their functionality. Samples measured include lithium-ion batteries (LIBs) cathode nanoparticles (300 - 500 nm), nickel-doped silicon dioxide (Ni@SiO2) catalytic nanoparticles (100 - 200 nm) and tin-doped copper (Sn@Cu) catalytic nanoparticles (<100 nm). The methods presented can be used to address the ongoing challenge of specimen preparation from particle samples for atom probe measurement, and they provide high quality data. These methods will broaden the application of atom probe tomography and will provide alternative option for researchers to assess the performance/structure of their functional nanomaterials.
RESUMEN
Identification and passivation of defect-induced electron-hole recombination centers are currently crucial for improving the efficiency of hybrid perovskite solar cells. Besides general intrinsic defects, experimental reports have indicated that hydrogen interstitials are also abundant in hybrid perovskite layers; however, few reports have evaluated the effect of such defects on the charge carrier recombination and device efficiencies. Here, we reveal that under I-poor synthesis conditions, the negatively charged monatomic hydrogen interstitial, Hi-, will form in the prototypical CH3NH3PbI3 perovskite layer, acting as a detrimental deep-level defect, which leads to efficient electron-hole recombination and lowers the cell performance. We further rationalize that Br doping can mitigate the large atomic displacement caused by the presence of Hi- and hence suppress the formation of the deep localized state. The results advance the knowledge of the deep-level defects in hybrid perovskites and provide useful information for enhancing solar cell performance by defect engineering.
RESUMEN
Ferroelectric nanoplates are attractive for applications in nanoelectronic devices. Defect engineering has been an effective way to control and manipulate ferroelectric properties in nanoscale devices. Defects can act as pinning centers for ferroelectric domain wall motion, altering the switching properties and domain dynamics of ferroelectrics. However, there is a lack of detailed investigation on the interactions between defects and domain walls in ferroelectric nanoplates due to the limitation of previous characterization techniques, which impedes the development of defect engineering in ferroelectric nanodevices. In this study, we applied in situ biasing transmission electron microscopy to explore how dislocation loops, which were judiciously introduced into barium titanate nanoplates via electron beam irradiation, affect the motion of ferroelectric domain walls. The results show that the motion was dramatically suppressed by these localized defects, because of the local strain fields induced by the defects. The pinning effect can be further enhanced by multiple domain walls embedded with defect arrays. These results indicate the possibility of manipulating domain switching in ferroelectric nanoplates via the electron beam.
RESUMEN
Halide perovskites hold promise for energy and optoelectronic applications due to their fascinating photophysical properties and facile processing. Among various forms, epitaxial thin single crystals (TSCs) are highly desirable due to their high crystallinity, reduced defects, and easy epitaxial integration with other materials. However, a cost-effective method for obtaining TSCs with perfect epitaxial features remains elusive. Here, we demonstrate a direct epitaxial growth of high-quality all-inorganic perovskite CsPbBr3 TSCs on various substrates through a facile solution process under near-ambient conditions. Structural characterizations reveal a high-quality epitaxy between the obtained perovskite TSCs and substrates, thus leading to efficiently reduced defects. The resultant TSCs display a low trap density (â¼1011 cm-3) and a long carrier lifetime (â¼10.16 ns). Top-gate/top-contact transistors based on these TSCs exhibit high on/off ratios of over 105, an optimal hole mobility of 3.9 cm2 V-1 s-1, almost hysteresis-free operation, and high stability at room temperature. Such a facile approach for the high-yield production of perovskite epitaxial TSCs will enable a broad range of high-performance electronic applications.
RESUMEN
Spatially accurate atom probe tomography reconstructions are vitally important when quantitative spatial measurements such as distances, volumes and morphologies etc. of nanostructural features are required information for the researcher. It is well known that the crystallographic information contained within the atom probe data of crystalline materials can be used to calibrate the tomographic reconstruction. Specifically, the crystallographic information projected into the field evaporation images is used. This offers a powerful and accurate enhancement of the atom probe technique. However, this is often difficult to do in practice. In previously reported approaches, it was necessary to index at least two poles to compute the image compression factor 'ξ' and observe crystallographic planes in at least one of the pole regions to obtain a measure of the field factor 'kf' while also manually accounting for a change in reconstruction parameters throughout the dataset. Not only is this error-prone and time consuming, it does not work for materials that exhibit limited crystallographic information in their field evaporation image. Here, we extend the applicability of the crystallographic calibration of atom probe data by proposing a reconstruction methodology where only one pole with observable lattice planes is required in the projected detector image. Our proposal also accounts for dynamic variations in the reconstruction parameters throughout the 3D dataset. The method is simpler and significantly faster to implement and is applicable to more atom probe situations than previously approaches. Our single-pole crystallography mediated reconstruction (SP-CMR) utilizes the Hawkes-Kasper projection model (equivalent to the equidistant-azimuthal projection model) and the direct fourier (DF) fit algorithm to determine the precise reconstruction parameters required to produce flat atomic planes. It is applied to experimental Al and highly Sb-doped Si data. The discrepancies between the spatial dimensions of the SP-CMR reconstructions compared to uncalibrated reconstructions are visually apparent. Consistent plane spacings and angles between crystallographic directions matching the theoretically known values for each crystal structure are demonstrated.
RESUMEN
The Cantor high-entropy alloy (HEA) of CrMnFeCoNi is a solid solution with a face-centered cubic structure. While plastic deformation in this alloy is usually dominated by dislocation slip and deformation twinning, our in situ straining transmission electron microscopy (TEM) experiments reveal a crystalline-to-amorphous phase transformation in an ultrafine-grained Cantor alloy. We find that the crack-tip structural evolution involves a sequence of formation of the crystalline, lamellar, spotted, and amorphous patterns, which represent different proportions and organizations of the crystalline and amorphous phases. Such solid-state amorphization stems from both the high lattice friction and high grain boundary resistance to dislocation glide in ultrafine-grained microstructures. The resulting increase of crack-tip dislocation densities promotes the buildup of high stresses for triggering the crystalline-to-amorphous transformation. We also observe the formation of amorphous nanobridges in the crack wake. These amorphization processes dissipate strain energies, thereby providing effective toughening mechanisms for HEAs.