Reconfigurable image processing metasurfaces with phase-change materials.

Optical metasurfaces have enabled analog computing and image processing within sub-wavelength footprints, and with reduced power consumption and faster speeds. While various image processing metasurfaces have been demonstrated, most of the considered devices are static and lack reconfigurability. Yet, the ability to dynamically reconfigure processing operations is key for metasurfaces to be used within practical computing systems. Here, we demonstrate a passive edge-detection metasurface operating in the near-infrared regime whose response can be drastically modified by temperature variations smaller than 10 °C around a CMOS-compatible temperature of 65 °C. Such reconfigurability is achieved by leveraging the insulator-to-metal phase transition of a thin layer of vanadium dioxide, which strongly alters the metasurface nonlocal response. Importantly, this reconfigurability is accompanied by performance metrics-such as numerical aperture, efficiency, isotropy, and polarization-independence - close to optimal, and it is combined with a simple geometry compatible with large-scale manufacturing. Our work paves the way to a new generation of ultra-compact, tunable and passive devices for all-optical computation, with potential applications in augmented reality, remote sensing and bio-medical imaging.

Thin film notch filters as platforms for biological image processing.

Many image processing operations involve the modification of the spatial frequency content of images. Here we demonstrate object-plane spatial frequency filtering utilizing the angular sensitivity of a commercial spectral bandstop filter. This approach to all-optical image processing is shown to generate real-time pseudo-3D images of transparent biological and other samples, such as human cervical cancer cells. This work demonstrates the potential of non-local, non-interferometric approaches to image processing for uses in label-free biological cell imaging and dynamical monitoring.

Nanophotonics enhanced coverslip for phase imaging in biology.

The ability to visualise transparent objects such as live cells is central to understanding biological processes. Here we experimentally demonstrate a novel nanostructured coverslip that converts phase information to high-contrast intensity images. This compact device enables real-time, all-optical generation of pseudo three-dimensional images of phase objects on transmission. We show that by placing unstained human cancer cells on the device, the internal structure within the cells can be clearly seen. Our research demonstrates the significant potential of nanophotonic devices for integration into compact imaging and medical diagnostic devices. The nanophotonics enhanced coverslip (NEC) enables ultra-compact phase imaging of samples placed directly on top of the device. Visualisation of artificial phase objects and unstained biological cells is demonstrated.

Near-Perfect Absorption of Light by Coherent Plasmon-Exciton States.

We experimentally demonstrate and theoretically study the formation of coherent plasmon-exciton states which exhibit absorption of >90% of the incident light (at resonance) and cancellation of absorption. These coherent states result from the interaction between a material supporting an electronic excitation and a plasmonic structure capable of (near) perfect absorption of light. We illustrate the potential implications of these coherent states by measuring the charge separation attainable after photoexcitation. Our study opens the prospect for realizing devices that exploit coherent effects in applications.

Self-Assembly of Plasmonic Near-Perfect Absorbers of Light: The Effect of Particle Size.

Structures capable of perfect light absorption promise technological advancements in varied applications, including sensing, optoelectronics, and photocatalysis. While it is possible to realize such structures by placing a monolayer of metal nanostructures above a reflecting surface, there remains limited studies on what effect particle size plays on their capacity to absorb light. Here, we fabricate near-perfect absorbers using colloidal Au nanoparticles, via their electrostatic self-assembly on a TiO2 film supported by a gold mirror. This method enables the control of interparticle spacing, thus minimizing reflection to achieve optimal absorption. Slightly altering the nanoparticle size in these structures reveals significant changes in the spectral separation of hybrid optical modes. We rationalize this observation by interpreting data with a coupled-mode theory that provides a thorough basis for creating functional absorbers using complex colloids and outlines the key considerations for achieving a broadened spectral response.

Multilevel nanoimprint lithography with a binary mould for plasmonic colour printing.

Pigment-free colouration based on plasmonic resonances has recently attracted considerable attention for potential in manufacturing and other applications. For plasmonic colour utilizing the metal-insulator-metal (MIM) configuration, the generated colour is not only dependent on the geometry and transverse dimensions, but also to the size of the vertical gap between the metal nanoparticles and the continuous metal film. The complexity of conventional fabrication methods such as electron beam lithography (EBL), however, limits the capacity to control this critical parameter. Here we demonstrate the straightforward production of plasmonic colour via UV-assisted nanoimprint lithography (NIL) with a simple binary mould and demonstrate the ability to control this gap distance in a single print by harnessing the nanofluidic behaviour of the polymer resist through strategic mould design. We show that this provides a further avenue for controlling the colour reflected by the resulting plasmonic pixels as an adjunct to the conventional approach of tailoring the transverse dimensions of the nanostructures. Our experimental results exhibit wide colour coverage of the CIE 1931 XY colour space through careful control of both the length and periodicity and the resulting vertical gap size of the structure during the nanoimprinting process. Furthermore, to show full control over the vertical dimension, we show that a fixed gap size can be produced by introducing complementary microcavities in the vicinity of the nanostructures on the original mould. This demonstrates a simple method for obtaining an additional degree of freedom in NIL not only for structural colouration but also for other industrial applications such as high-density memory, biosensors and manufacturing.

Optical image processing with metasurface dark modes.

Here we consider image processing using the optical modes of metasurfaces with an angle-dependent excitation. These spatially dispersive modes can be used to directly manipulate the spatial frequency content of an incident field, suggesting their use as ultra-compact alternatives for analog optical information processing. A general framework for describing the filtering process in terms of the optical transfer functions is provided. In the case where the relevant mode cannot be excited with a normally incident plane wave (a dark mode), high-pass filtering is obtained. We provide examples demonstrating filtering of both amplitude and pure phase objects.

Cathodoluminescence as a probe of the optical properties of resonant apertures in a metallic film.

Here we present the results of an investigation of resonances of azimuthal trimer arrangements of rectangular slots in a gold film on a glass substrate using cathodoluminescence (CL) as a probe. The variation in the CL signal collected from specific locations on the sample as a function of wavelength and the spatial dependence of emission into different wavelength bands provides considerable insight into the resonant modes, particularly sub-radiant modes, of these apertures. By comparing our experimental results with electromagnetic simulations we are able to identify a Fabry-Pérot mode of these cavities as well as resonances associated with the excitation of surface plasmon polaritons on the air-gold boundary. We obtain evidence for the excitation of dark (also known as sub-radiant) modes of apertures and aperture ensembles.

Direct Assembly of Large Area Nanoparticle Arrays.

A major goal of nanotechnology is the assembly of nanoscale building blocks into functional optical, electrical, or chemical devices. Many of these applications depend on an ability to optically or electrically address single nanoparticles. However, positioning large numbers of single nanocrystals with nanometer precision on a substrate for integration into solid-state devices remains a fundamental roadblock. Here, we report fast, scalable assembly of thousands of single nanoparticles using electrophoretic deposition. We demonstrate that gold nanospheres down to 30 nm in size and gold nanorods <100 nm in length can be assembled into predefined patterns on transparent conductive substrates within a few seconds. We find that rod orientation can be preserved during deposition. As proof of high fidelity scale-up, we have created centimeter scale patterns comprising more than 1 million gold nanorods.

Directed Chemical Assembly of Single and Clustered Nanoparticles with Silanized Templates.

The assembly of nanoscale materials into arbitrary, organized structures remains a major challenge in nanotechnology. Herein, we report a general method for creating 2D structures by combining top-down lithography with bottom-up chemical assembly. Under optimal conditions, the assembly of gold nanoparticles was achieved in less than 30 min. Single gold nanoparticles, from 10 to 100 nm, can be placed in predetermined patterns with high fidelity, and higher-order structures can be generated consisting of dimers or trimers. It is shown that the nanoparticle arrays can be transferred to, and embedded within, polymer films. This provides a new method for the large-scale fabrication of nanoparticle arrays onto diverse substrates using wet chemistry.

Plasmonic Colour Filters Based on Coaxial Holes in Aluminium.

Aluminum is an alternative plasmonic material in the visible regions of the spectrum due to its attractive properties such as low cost, high natural abundance, ease of processing, and complementary metal-oxide-semiconductor (CMOS) and liquid crystal display (LCD) compatibility. Here, we present plasmonic colour filters based on coaxial holes in aluminium that operate in the visible range. Using both computational and experimental methods, fine-tuning of resonance peaks through precise geometric control of the coaxial holes is demonstrated. These results will lay the basis for the development of filters in high-resolution liquid crystal displays, RGB-spatial light modulators, liquid crystal over silicon devices and novel displays.

Luminescence of a Transition Metal Complex Inside a Metamaterial Nanocavity.

Modification of the local density of optical states using metallic nanostructures leads to enhancement in the number of emitted quanta and photocatalytic turnover of luminescent materials. In this work, the fabrication of a metamaterial is presented that consists of a nanowire separated from a metallic mirror by a polymer thin film doped with a luminescent organometallic iridium(III) complex. The large spin-orbit coupling of the heavy metal atom results in an excited state with significant magnetic-dipole character. The nanostructured architecture supports two distinct optical modes and their assignment achieved with the assistance of numerical simulations. The simulations show that one mode is characterized by strong confinement of the electric field and the other by strong confinement of the magnetic field. These modes elicit drastic changes in the emitter's photophysical properties, including dominant nanocavity-derived modes observable in the emission spectra along with significant increases in emission intensity and the total decay rate. A combination of simulations and momentum-resolved spectroscopy helps explain the mechanism of the different interactions of each optical mode supported by the metamaterial with the excited state of the emitter.

British Association for Psychopharmacology consensus guidance on the use of psychotropic medication preconception, in pregnancy and postpartum 2017.

Decisions about the use of psychotropic medication in pregnancy are an ongoing challenge for clinicians and women with mental health problems, owing to the uncertainties around risks of the illness itself to mother and fetus/infant, effectiveness of medications in pregnancy and risks to the fetus/infant from in utero exposure or via breast milk. These consensus guidelines aim to provide pragmatic advice regarding these issues. They are divided into sections on risks of untreated illness in pregnancy; general principles of using drugs in the perinatal period; benefits and harms associated with individual drugs; and recommendations for the management of specific disorders.

The Plasmonic Pixel: Large Area, Wide Gamut Color Reproduction Using Aluminum Nanostructures.

We demonstrate a new plasmonic pixel (PP) design that produces a full-color optical response over macroscopic dimensions. The pixel design employs arrays of aluminum nanorods "floating" above their Babinet complementary screen, Concepts from conventional cyan magenta yellow key (CMYK) printing techniques and red green blue (RGB) digital displays are integrated with nanophotonic design principles and adapted to the production of PP elements. The fundamental PP color blocks of CMYK are implemented via a composite plasmonic nanoantenna/slot design and then mixed in a digital display analog 3 × 3 array to produce a broad-gamut PP. The PP goes beyond current investigations into plasmonic color production by enabling a broad color gamut and physically large plasmonic color features/devices/images. The use of nanorods also leads to a color response that is polarization tunable. Furthermore, devices are fabricated using aluminum and the fabrication strategy is compatible with inexpensive, rapid-throughput, nanoimprint approaches. Here we quantify, both computationally and experimentally, the performance of the PP. Spectral data from a test palette is obtained and a large area (>1.5 cm lateral dimensions) reproduction of a photograph is generated exemplifying the technqiue.

Photoinduced Electron Transfer in the Strong Coupling Regime: Waveguide-Plasmon Polaritons.

Reversible exchange of photons between a material and an optical cavity can lead to the formation of hybrid light-matter states where material properties such as the work function [ Hutchison et al. Adv. Mater. 2013 , 25 , 2481 - 2485 ], chemical reactivity [ Hutchison et al. Angew. Chem., Int. Ed. 2012 , 51 , 1592 - 1596 ], ultrafast energy relaxation [ Salomon et al. Angew. Chem., Int. Ed. 2009 , 48 , 8748 - 8751 ; Gomez et al. J. Phys. Chem. B 2013 , 117 , 4340 - 4346 ], and electrical conductivity [ Orgiu et al. Nat. Mater. 2015 , 14 , 1123 - 1129 ] of matter differ significantly to those of the same material in the absence of strong interactions with the electromagnetic fields. Here we show that strong light-matter coupling between confined photons on a semiconductor waveguide and localized plasmon resonances on metal nanowires modifies the efficiency of the photoinduced charge-transfer rate of plasmonic derived (hot) electrons into accepting states in the semiconductor material. Ultrafast spectroscopy measurements reveal a strong correlation between the amplitude of the transient signals, attributed to electrons residing in the semiconductor and the hybridization of waveguide and plasmon excitations.

Hot Carrier Extraction with Plasmonic Broadband Absorbers.

Hot charge carrier extraction from metallic nanostructures is a very promising approach for applications in photocatalysis, photovoltaics, and photodetection. One limitation is that many metallic nanostructures support a single plasmon resonance thus restricting the light-to-charge-carrier activity to a spectral band. Here we demonstrate that a monolayer of plasmonic nanoparticles can be assembled on a multistack layered configuration to achieve broadband, near-unit light absorption, which is spatially localized on the nanoparticle layer. We show that this enhanced light absorbance leads to ∼40-fold increases in the photon-to-electron conversion efficiency by the plasmonic nanostructures. We developed a model that successfully captures the essential physics of the plasmonic hot electron charge generation and separation in these structures. This model also allowed us to establish that efficient hot carrier extraction is limited to spectral regions where (i) the photons have energies higher than the Schottky junctions and (ii) the absorption of light is localized on the metal nanoparticles.

Barriers along the care cascade of HIV-infected men in a large urban center of Brazil.

Global and national HIV/AIDS policies utilize the care cascade to emphasize the importance of continued engagement in HIV services from diagnosis to viral suppression. Several studies have documented barriers that men experience in accessing services at specific stages of care, but few have analyzed how these barriers operate along the care cascade. Brazil offers a unique setting for analyzing barriers to HIV care because it is a middle-income country with a large HIV epidemic and free, universal access to HIV/AIDS services. Semi-structured interviews were conducted in 2011 with HIV-infected men (n = 25) receiving care at the only HIV/AIDS state reference center in Salvador, Brazil, the third largest city in the country. Interviews were transcribed and coded for analysis. Researchers identified barriers to services along the care cascade: health service-related obstacles (poor-quality care, lengthy wait times, and drug supply problems); psychosocial and emotional challenges (fear of disclosure and difficulty accepting HIV diagnosis); indirect costs (transportation and absenteeism at work or school); low perceived risk of HIV; and toxicity and complexity of antiretroviral drug (ARV) regimens. The stages of the care cascade interrupted by each barrier were also identified. Most barriers affected multiple, and often all, stages of care, while toxicity and complexity of ARV regimens was only present at a single care stage. Efforts to eliminate more prevalent barriers have the potential to improve care continuity at multiple stages. Going forward, assessing the relative impact of barriers along one's entire care trajectory can help tailor improvements in service provision, facilitate achievement of viral suppression, and improve access to life-saving testing, treatment, and care.

Broadband chirality-coded meta-aperture for photon-spin resolving.

The behaviour of light transmitted through an individual subwavelength aperture becomes counterintuitive in the presence of surrounding 'decoration', a phenomenon known as the extraordinary optical transmission. Despite being polarization-sensitive, such an individual nano-aperture, however, often cannot differentiate between the two distinct spin-states of photons because of the loss of photon information on light-aperture interaction. This creates a 'blind-spot' for the aperture with respect to the helicity of chiral light. Here we report the development of a subwavelength aperture embedded with metasurfaces dubbed a 'meta-aperture', which breaks this spin degeneracy. By exploiting the phase-shaping capabilities of metasurfaces, we are able to create specific meta-apertures in which the pair of circularly polarized light spin-states produces opposite transmission spectra over a broad spectral range. The concept incorporating metasurfaces with nano-apertures provides a venue for exploring new physics on spin-aperture interaction and potentially has a broad range of applications in spin-optoelectronics and chiral sensing.

Emission enhancement and polarization of semiconductor quantum dots with nanoimprinted plasmonic cavities: towards scalable fabrication of plasmon-exciton displays.

Here we present an application of a high throughput nanofabrication technique to the creation of a plasmonic metasurface and demonstrate its application to the enhancement and control of radiation by quantum dots (QDs). The metasurface consists of an array of cold-forged rectangular nanocavities in a thin silver film. High quantum efficiency graded alloy CdSe/CdS/ZnS quantum dots were spread over the metasurface and the effects of the plasmon-exciton interactions characterised. We found a four-fold increase in the QDs radiative decay rate and emission brightness, compared to QDs on glass, along with a degree of linear polarisation of 0.73 in the emitted field. Such a surface could be easily integrated with current QD display or organic solar cell designs.