RESUMEN
OBJECTIVES: An increasing number of countries are banning the production and use of asbestos, in compliance with the ratification of the C162 Asbestos Convention and the Basel Convention, and in response to the call for its elimination in the ILO resolution and WHO reports on the health risks associated with asbestos. Nevertheless, several countries, including Kyrgyzstan, are still miners and/or manufacturers of asbestos. The main objective of the study is to assess the occupational exposure to chrysotile of workers engaged in a production facility of asbestos-cement products in Kyrgyzstan. METHODS: Monitored workers (n = 16, for a total of n = 18 samples) were divided into 3 "Similar Exposure Groups" (SEGs; SEG-1: asbestos loading; SEG-2; asbestos-cement mixing; SEG-3: cutting of asbestos-cement sheets) according to EN 689 standard. Samples were collected through personal sampling and subsequently examined by means of scanning electron microscope equipped with an energy-dispersive spectrometer for the compositional analysis of each fibre. The numerical concentration of airborne asbestos fibres was henceforward determined by dividing the number of fibres and the volume of sampled air (expressed in the number of fibres per millilitre of air: ff/ml). RESULTS: Investigated workers resulted to be exposed to chrysotile fibres. Results (GM ± GSD) outlined extremely high exposure levels for SEG-1 (2.2 ± 2.1 ff/ml) and SEG-3 (4.7 ± 1.6 ff/ml) workers and lower-but still relevant-exposure values for SEG-2 (0.91 ± 2.6 ff/ml) workers. CONCLUSIONS: The results obtained in this case study can help to document potentially critical situations of occupational exposure to asbestos that can still occur nowadays in low and middle-income countries where asbestos is still mined and processed.
RESUMEN
The main aim of this study is to quantitatively evaluate the differences, in terms of exposure to PM (particulate matter), between WFO (working-from-office) and WFH (working-from-home) conditions. Two measurement surveys were performed: a long-term and a short-term campaign, focused on the monitoring of personal exposure to size-fractionated PM in these different working conditions. Results of the long-term campaign show that the WFH subject is exposed to higher (up to 4 times) PM concentration, compared to the WFO subject. Specific activities performed by the subjects impacted their exposure concentrations, even if the most relevant contribution to total exposure was made by desk work. Results of the short-term campaign indicate that the subjects can be divided into two groups: subjects most exposed during the WFH mode (HE_H - Higher_Exposure_Home) and subjects most exposed during the WFO mode (HE_O - Higher_Exposure_Office). HE_H group is exposed to levels of pollutants up to 4 times higher in the domestic than in the office environment, during the moment of desk work. The HE_O group is exposed to higher (double) concentration levels during desk work during the WFO day. Considering the possible growing trend towards remote work it is important to evaluate these "new domestic offices" comprehensively.
RESUMEN
This study aimed to assess the performance, in terms of precision and accuracy, of a prototype (called "P.ALP"-Ph.D. Air Quality Low-cost Project) developed for monitoring PM2.5 concentration levels. Four prototypes were co-located with reference instrumentation in four different microenvironments simulating real-world and working conditions, namely (i) office, (ii) home, (iii) outdoor, and (iv) occupational environments. The devices were evaluated for a total of 20 monitoring days (approximately 168 h) under a wide range of PM2.5 concentrations. The performances of the prototypes (based on the light-scattering working principle) were tested through different statistical methods. After the data acquisition and data cleaning processes, a linear regression analysis was performed to assess the precision (by comparing all possible pairs of devices) and the accuracy (by comparing the prototypes against the reference instrumentation) of the P.ALP. Moreover, the United States Environmental Protection Agency (US EPA) criteria were applied to assess the possible usage of this instrumentation, and to evaluate the eventual error trends of the P.ALP in the data storage process, Bland-Altman plots were also adopted. The outcomes of this study underlined that the P.ALP performed differently depending on the microenvironment in which it was tested and, consequently, on the PM2.5 concentrations. The device can monitor PM2.5 variations with acceptable results, but the performance cannot be considered satisfactory at extremely low and remarkably high PM2.5 concentrations. Thanks to modular components and open-source software, the tested device has the potential to be customized and adapted to better fit specific study design needs, but it must be implemented with ad hoc calibration factors depending on the application before being used in field.
RESUMEN
Short-term exposure to fine particulate matter (PM2.5) is associated with the activation of adverse inflammatory responses, increasing the risk of developing acute respiratory diseases, such as those caused by pathogen infections. However, the functional mechanisms underlying this evidence remain unclear. In the present study, we generated a zebrafish model of short-term exposure to a specific PM2.5, collected in the northern metropolitan area of Milan, Italy. First, we assessed the immunomodulatory effects of short-term PM2.5 exposure and observed that it elicited pro-inflammatory effects by inducing the expression of cytokines and triggering hyper-activation of both neutrophil and macrophage cell populations. Moreover, we examined the impact of a secondary infectious pro-inflammatory stimulus induced through the injection of Pseudomonas aeruginosa lipopolysaccharide (Pa-LPS) molecules after exposure to short-term PM2.5. In this model, we demonstrated that the innate immune response was less responsive to a second pro-inflammatory infectious stimulus. Indeed, larvae exhibited dampened leukocyte activation and impaired production of reactive oxygen species. The obtained results indicate that short-term PM2.5 exposure alters the immune microenvironment and affects the inflammatory processes, thus potentially weakening the resistance to pathogen infections.
Asunto(s)
Contaminantes Atmosféricos , Material Particulado , Animales , Material Particulado/toxicidad , Material Particulado/metabolismo , Pez Cebra/metabolismo , Citocinas/metabolismo , Especies Reactivas de Oxígeno , Inmunidad Innata , Contaminantes Atmosféricos/toxicidad , Contaminantes Atmosféricos/análisisRESUMEN
Over the last decade, technological advancements have been made available and applied in a wide range of applications in several work fields, ranging from personal to industrial enforcements. One of the emerging issues concerns occupational safety and health in the Fourth Industrial Revolution and, in more detail, it deals with how industrial hygienists could improve the risk-assessment process. A possible way to achieve these aims is the adoption of new exposure-monitoring tools. In this study, a systematic review of the up-to-date scientific literature has been performed to identify and discuss the most-used sensors that could be useful for occupational risk assessment, with the intent of highlighting their pros and cons. A total of 40 papers have been included in this manuscript. The results show that sensors able to investigate airborne pollutants (i.e., gaseous pollutants and particulate matter), environmental conditions, physical agents, and workers' postures could be usefully adopted in the risk-assessment process, since they could report significant data without significantly interfering with the job activities of the investigated subjects. To date, there are only few "next-generation" monitors and sensors (NGMSs) that could be effectively used on the workplace to preserve human health. Due to this fact, the development and the validation of new NGMSs will be crucial in the upcoming years, to adopt these technologies in occupational-risk assessment.
Asunto(s)
Contaminantes Ambientales , Salud Laboral , Humanos , Material Particulado/análisis , Medición de Riesgo , Tecnología , Lugar de TrabajoRESUMEN
The PRIMATE study is an Italian translational research project, which aims to identify personalized biomarkers associated with clinical characteristics of malignant pleural mesothelioma (MPM). For this purpose, characteristics of MPM patients with different degrees of asbestos exposure will be compared to identify somatic mutations, germline polymorphism, and blood inflammatory biomarkers. In this framework, we assessed exposure to asbestos for 562 cases of MPM extracted from the Lombardy region Mesothelioma Registry (RML), for which a complete interview based on a standardized national questionnaire and histopathological specimens were available. Exposure assessment was performed: (1) through experts' evaluation (considered as the gold standard for the purpose of this study), according to the guidelines of the Italian National Mesothelioma Registry (ReNaM) and (2) using a job-exposure matrix (SYN-JEM) to obtain qualitative (ever/never) and quantitative estimates of occupational asbestos exposure (cumulative exposure expressed in fibers per mL (f/mL)). The performance of SYN-JEM was evaluated against the experts' evaluation. According to experts' evaluation, occupational asbestos exposure was recognized in 73.6% of men and 23.6% of women; furthermore, 29 men (7.8%) and 70 women (36.9%) had non-occupational exposure to asbestos. When applying SYN-JEM, 225 men (60.5%) and 25 women (13.2%) were classified as occupationally exposed, with a median cumulative exposure higher for men (1.7 f/mL-years) than for women (1.2 f/mL-years). The concordance between the two methods (Cohen's kappa) for occupational exposure assessment was 0.46 overall (0.41 in men, and 0.07 in women). Sensitivity was higher in men (0.73) than in women (0.18), while specificity was higher in women (0.88) than in men (0.74). Overall, both methods can be used to reconstruct past occupational exposure to asbestos, each with its own advantages and limitations.
Asunto(s)
Amianto , Mesotelioma Maligno , Mesotelioma , Exposición Profesional , Animales , Amianto/efectos adversos , Femenino , Humanos , Italia/epidemiología , Masculino , Mesotelioma/inducido químicamente , Mesotelioma/epidemiología , Exposición Profesional/efectos adversos , Primates , Encuestas y CuestionariosRESUMEN
In occupational epidemiology, job coding is an important-but time-consuming-step in assigning exposure. We implemented a tool (i.e. a crosswalk) to translate occupation codes from the Italian (ISTAT-CIP-91, n = 6319 five-digit job codes) to the International Standard Classification of Occupations (ISCO-68, n = 1881 five-digit job codes). The former is currently used in Italy for various purposes (e.g. in the National Mesothelioma Registry). The latter has been used in several studies on occupational cancers because it facilitates communication of results to the scientific community and, most importantly, because some job exposure matrices (JEMs) are based on international codes. Three authors created a table containing the crosswalk structure, providing an interpretation for each of the ISTAT-CIP-91 codes job descriptions and then manually recoding them according to ISCO-68. Two other authors independently revised it. The performance of the final version was assessed by comparison with results obtained by manual ISCO-68 coding performed in two previous case-control studies on asbestos and mesothelioma. More specifically, the automatically obtained ISCO-68 codes were merged with a JEM (DOM-JEM). The resulting individual asbestos exposure estimates (ever versus never exposed) were compared to those originally obtained (using the same DOM-JEM) from manual translation of ISTAT-CIP-91 to ISCO-68 (considered as the 'gold standard'). In the first study, among 159 peritoneal mesothelioma cases (400 job codes), Cohen's kappa was 0.91, sensitivity 0.95, and specificity 0.96. In the second study, among 716 pleural mesothelioma cases and controls (4400 job codes) kappa was 0.86, sensitivity 0.94, and specificity 0.91. Performance was better among in women. For men, performance was lower among cases than among controls (kappa 0.70, sensitivity 0.95, specificity 0.72 versus kappa 0.87, sensitivity 0.97, and specificity 0.92). In conclusion, the proposed tool allowed a rapid translation of thousands of job codes with good to excellent accuracy. The table containing ISTAT-CIP-91 codes and job descriptions and the corresponding ISCO-68 codes and job descriptions is made publicly available and can be freely used for epidemiological analyses in Italy and international collaborations.
Asunto(s)
Amianto , Mesotelioma , Exposición Profesional , Femenino , Humanos , Masculino , Mesotelioma/epidemiología , OcupacionesRESUMEN
Objective During the induction of gaseous anaesthesia, waste anaesthetic gases (WAGs) can be released into workplace air. Occupational exposure to high levels of halogenated WAGs may lead to adverse health effects; hence, it is important to measure WAGs concentration levels to perform risk assessment and for health protection purposes. Methods A systematic review of the scientific literature was conducted on two different scientific databases (Scopus and PubMed). A total of 101 studies, focused on sevoflurane, desflurane and isoflurane exposures in hospitals, were included in this review. Key information was extracted to provide (1) a description of the study designs (e.g., monitoring methods, investigated occupational settings, anaesthetic gases in use); (2) an evaluation of time trends in the measured concentrations of considered WAGs; (3) a critical evaluation of the sampling strategies, monitoring methods and instruments used. Results Environmental monitoring was prevalent (68%) and mainly used for occupational exposure assessment during adult anaesthesia (84% of cases). Real-time techniques such as photoacoustic spectroscopy and infrared spectrophotometry were used in 58% of the studies, while off-line approaches such as active or passive sampling followed by GC-MS analysis were used less frequently (39%). Conclusions The combination of different instrumental techniques allowing the collection of data with different time resolutions was quite scarce (3%) despite the fact that this would give the opportunity to obtain reliable data for testing the compliance with 8 h occupational exposure limit values and at the same time to evaluate short-term exposures.
Asunto(s)
Contaminantes Ocupacionales del Aire , Anestésicos por Inhalación , Exposición Profesional , Anestésicos por Inhalación/efectos adversos , Anestésicos por Inhalación/análisis , Contaminantes Ocupacionales del Aire/análisis , Quirófanos , Exposición Profesional/efectos adversos , HospitalesRESUMEN
In the last years, the issue of exposure assessment of airborne pollutants has been on the rise, both in the environmental and occupational fields. Increasingly severe national and international air quality standards, indoor air guidance values, and exposure limit values have been developed to protect the health of the general population and workers; this issue required a significant and continuous improvement in monitoring technologies to allow the execution of proper exposure assessment studies. One of the most interesting aspects in this field is the development of the "next-generation" of airborne pollutants monitors and sensors (NGMS). The principal aim of this review is to analyze and characterize the state of the art and of NGMS and their practical applications in exposure assessment studies. A systematic review of the literature was performed analyzing outcomes from three different databases (Scopus, PubMed, Isi Web of Knowledge); a total of 67 scientific papers were analyzed. The reviewing process was conducting systematically with the aim to extrapolate information about the specifications, technologies, and applicability of NGMSs in both environmental and occupational exposure assessment. The principal results of this review show that the use of NGMSs is becoming increasingly common in the scientific community for both environmental and occupational exposure assessment. The available studies outlined that NGMSs cannot be used as reference instrumentation in air monitoring for regulatory purposes, but at the same time, they can be easily adapted to more specific applications, improving exposure assessment studies in terms of spatiotemporal resolution, wearability, and adaptability to different types of projects and applications. Nevertheless, improvements needed to further enhance NGMSs performances and allow their wider use in the field of exposure assessment are also discussed.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Ambientales , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Monitoreo del Ambiente , HumanosRESUMEN
Recently, the need to assess personal exposure in different micro-environments has been highlighted. Further, estimating the inhaled dose of pollutants is considerably one of the most interesting parameters to be explored to complete the fundamental information obtained through exposure assessment, especially if associated with a dose-response approach. To analyze the main results obtained from the studies related to the estimation of the inhaled dose of pollutants in different micro-environments (environments in which an individual spends a part of his day), and to identify the influence of different parameters on it, a systematic review of the literature was performed. The principal outcomes from the considered studies outlined that (i) exposure concentration and residence time are among the most important parameters to be evaluated in the estimation of the inhaled dose, especially in transport environments. Further, (ii) the pulmonary ventilation rate can be of particular interest during active commuting because of its increase, which increases the inhalation of pollutants. From a methodological point of view, the advent of increasingly miniaturized, portable and low-cost technologies could favor these kinds of studies, both for the measurement of atmospheric pollutants and the real-time evaluation of physiological parameters used for estimation of the inhaled dose. The main results of this review also show some knowledge gaps. In particular, numerous studies have been conducted for the evaluation (in terms of personal exposure and estimation of the inhaled dose) of different PM fractions: other airborne pollutants, although harmful to human health, are less represented in studies of this type: for this reason, future studies should be conducted, also considering other air pollutants, not neglecting the assessment of exposure to PM. Moreover, many studies have been conducted indoors, where the population spends most of their daily time. However, it has been highlighted how particular environments, even if characterized by a shorter residence time, can contribute significantly to the dose of inhaled pollutants. These environments are, therefore, of particular importance and should be better evaluated in future studies, as well as occupational environments, where the work results in a high pulmonary ventilation rate. The attention of future studies should also be focused on these categories of subjects and occupational studies.
RESUMEN
Epidemiological studies show a strong association between exposure to air pollution - and particularly to particulate matter (PM) -, increased prevalence of Multiple Sclerosis (MS) and higher rates of hospital admissions for MS and MS relapses. Besides having immunomodulatory effects and sustaining a systemic oxidative-inflammatory response, PM may participate in MS pathogenesis by targeting also Central Nervous System (CNS)-specific processes, such as myelin repair. Here we show that, in a mouse model of lysolecithin-induced demyelination of the subcortical white matter, post-injury exposure to fine PM hampers remyelination, disturbs oligodendroglia differentiation dynamics and promotes astroglia and microglia reactivity. These findings support the view that exposure to fine PM can contribute to demyelinating pathologies by targeting the endogenous regenerative capability of the CNS tissue.
Asunto(s)
Enfermedades Desmielinizantes/inducido químicamente , Enfermedades Desmielinizantes/patología , Modelos Animales de Enfermedad , Vaina de Mielina/patología , Material Particulado/toxicidad , Sustancia Blanca/patología , Animales , Diferenciación Celular/fisiología , Masculino , Ratones , Ratones Endogámicos C57BL , Material Particulado/administración & dosificación , Tráquea/patologíaRESUMEN
In this study, the occupational risk assessment of carbon nanotubes (CNTs) was performed by means of a probabilistic approach. Chronic and subchronic inhalation exposure studies were retrieved during the hazard identification phase of the study. These studies were then used to obtain a guidance value (BMCh, expressed as a lognormal distribution with geometric mean ± geometric standard deviation = 10.0 ± 4.2 µg/m3) for occupational inhalation exposure to CNTs. An exposure scenario was selected from the scientific literature: three different work events (WEs) related to the production of conductive films were considered: (WE1) manufacturing of single walled carbon nanotubes films during normal operation using local exhaust ventilation (LEV); (WE2) manufacturing of SWCNT film without LEV; and (WE3) cleaning of one of the reactors. For each WE, a probability distribution function was applied, considering exposure expressed as mass concentration, as derived from three different measurement techniques. The ratio of the exposure and the BMCh distributions (i.e., the risk characterization ratio-RCR) was used to calculate the probability of occurrence of a relevant occupational risk. All the considered WEs indicated the presence of a risk (i.e., RCR distributions ≥ 1); however, only WE2 resulted in a statistically significant level of risk.
RESUMEN
During rush hours, commuters are exposed to high concentrations and peaks of traffic-related air pollutants. The aims of this study were therefore to extend the inhaled dose estimation outcomes from a previous work investigating the inhaled dose of a typical commuter in the city of Milan, Italy, and to extend these results to a wider population. The estimation of the dose of pollutants inhaled by commuters and deposited within the respiratory tract could be useful to help commuters in choosing the modes of transport with the lowest exposure and to increase their awareness regarding this topic. In addition, these results could provide useful information to policy makers, for the creation/improvement of a mobility that takes these results into account. The principal result outcomes from the first part of the project (case study on a typical commuter in the city of Milan) show that during the winter period, the maximum deposited mass values were estimated in the "Other" environments and in "Underground". During the summer period, the maximum values were estimated in the "Other" and "Walking (high-traffic conditions)" environments. For both summer and winter, the lowest values were estimated in the "Car" and "Walking (low-traffic conditions)" environments. Regarding the second part of the study (the extension of the results to the general population of commuters in the city of Milan), the main results show that the period of permanence in a given micro-environment (ME) has an important influence on the inhaled dose, as well as the pulmonary ventilation rate. In addition to these results, it is of primary importance to report how the inhaled dose of pollutants can be strongly influenced by the time spent in a particular environment, as well as the subject's pulmonary ventilation rate and pollutant exposure levels. For these reasons, the evaluation of these parameters (pulmonary ventilation rate and permanence time, in addition to the exposure concentration levels) for estimating the inhaled dose is of particular relevance.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Ambientales , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Ciudades , Exposición a Riesgos Ambientales/análisis , Humanos , Exposición por Inhalación , Italia , Material Particulado/análisis , TransportesRESUMEN
As part of the assessment and management of chemical risk and occupational hygiene, retrospective exposure assessment (REA) to chemical agents can be defined as the estimate of exposure associated with a person's work history. The fundamental problem underlying the reconstruction of the exposure is that of transforming this type of information in quantitative terms to obtain an accurate estimate. REA can follow various approaches, some of which are technically complicated and both time and resource consuming. The aim of this systematic review is to present the techniques mainly used for occupational REA. In order to carry out this evaluation, a systematic review of the scientific literature was conducted. Forty-four studies were identified (published from 2010 to date) and analyzed. In exposure reconstruction studies, quantitative approaches should be preferable, especially when estimates will be used in the context of health impact assessment or epidemiology, although it is important to stress how, ideally, the experimental data available for the considered scenario should be used whenever possible as the main starting information base for further processing. To date, there is no single approach capable of providing an accurate estimate of exposure for each reasonably foreseeable condition and situation and the best approach generally depends on the level of information available for the specific case. The use of a combination of different reconstruction techniques can, therefore, represent a powerful tool for weighting and integrating data obtained through qualitative and quantitative approaches, in order to obtain the best possible estimate.
Asunto(s)
Exposición por Inhalación/análisis , Exposición Profesional/efectos adversos , Salud Laboral , Medición de Riesgo/métodos , Amianto/efectos adversos , Monitoreo del Ambiente , Humanos , ProhibitinasRESUMEN
To characterise the mass concentration, size-distribution, and respiratory deposition of selected trace metals (Cr, Mn, Fe, Ni, Cu, Zn, Ba, and Pb) in size-segregated PM2.5, a long-term monitoring campaign was undertaken at an urban background site in Como (Northern Italy). 96-h aerosol samples were collected weekly, from May 2015 to March 2016, using a 13-stage low pressure impactor and analysed via laser ablation-inductively coupled plasma-mass spectrometry. Significantly higher levels of trace metals were generally found during the heating season (two to more than four times) compared to the non-heating period at all size ranges, especially for concentrations in PM0.1-1. Distinct distribution profiles characterised the different elements, even though the corresponding heating and non-heating shapes always exhibited similar features, with negligible seasonal shifts in the average mass median aerodynamic diameters. Fe, Ba, and Cu had >70% of their mass in PM1-2.5, whereas Pb, Zn, and Ni showed higher contributions in the accumulation mode (>60%). Finally, broad size-distributions were found for Cr and Mn. The multiple-path particle dosimetry model estimated the overall deposition fractions in human airways varying between 27% (Pb) and 48% (Ba). The greatest deposition variability was always registered in the head region of the respiratory system, with the highest contributions for those metals predominantly accumulated in the PM2.5 coarse modes. In contrast, the deposition in the deepest respiratory tract maintained nearly constant proportions over time, becoming notably important for Pb, Ni, and Zn (â¼13%) with respect to their total deposition. The comparison with national limits established for Pb and Ni suggested the absence of significant risks for the local population, as expected, with average concentrations two orders of magnitude lower than the corresponding annual limit and objective value. Similar findings were reported for all the other metals, for which the estimated hazard quotients were always well <1.
Asunto(s)
Contaminantes Atmosféricos/análisis , Metales Pesados/análisis , Monitoreo del Ambiente , Humanos , Italia , Material Particulado/análisis , Medición de RiesgoRESUMEN
Several studies evaluating exposure to pollutants in microenvironments (MEs) are available in the scientific literature, but studies that evaluate the inhaled doses of pollutants are few in number. Therefore, this study aimed to evaluate the exposure of commuters to different pollutants (i.e., nitrogen dioxide [NO2] and fractionated particulate matter [PM], including ultrafine particles [UFPs]) using miniaturized and portable real-time monitoring instruments in selected MEs; the inhaled doses of these pollutants were estimated for each of these MEs. Measurements were performed along a typical commute, considering different traffic and nontraffic MEs. Experimental data were collected over four working weeks in two different seasons (winter and summer). Different portable and miniaturized instruments were used to evaluate PM and NO2 exposure. Furthermore, physiological parameters were evaluated using a heart rate monitor. The principal results show that higher exposure levels were measured in Underground (for all PM fractions and NO2) and in Car (UFP), while lower levels were measured in Car (PM and NO2) and in Train (UFP). In contrast, higher values of the inhaled cumulative dose were estimated in environments defined as Other, followed by Walking (ht), while lower values were observed in Walking (lt) and in Car.
Asunto(s)
Contaminantes Atmosféricos , Exposición a Riesgos Ambientales , Contaminantes Ambientales , Monitoreo del Ambiente , Humanos , Dióxido de Nitrógeno , Tamaño de la Partícula , Material Particulado , TransportesRESUMEN
Hypertensive disorders are common complications during pregnancy (HDP) with substantial public health impact. Acute and chronic particulate matter (PM) exposure during pregnancy increases the risk of HDP, although the underlying molecular mechanisms remain unclear. Extracellular vesicles (EVs) may be the ideal candidates for mediating the effects of PM exposure in pregnancy as they are released in response to environmental stimuli. The INSIDE project aims to investigate this mechanism in pregnancy outcomes. The study population is enrolled at the Fetal Medicine Unit of Fondazione IRCCS Ca'Granda-Ospedale Maggiore Policlinico at 10-14 weeks of gestation. Exposure to PM10 and PM2.5 is assessed using the flexible air quality regional model (FARM) and Bayesian geostatistical models. Each woman provides a blood sample for EV analysis and circulating biomarker assessment. Moreover, a subgroup of recruited women (n = 85) is asked to participate in a cardiovascular screening program including a standard clinical evaluation, a non-invasive assessment of right ventricular function, and pulmonary circulation at rest and during exercise. These subjects are also asked to wear a personal particulate sampler, to measure PM10, PM2.5, and PM1. The INSIDE study is expected to identify the health impacts of PM exposure on pregnancy outcomes.
Asunto(s)
Contaminantes Atmosféricos/efectos adversos , Contaminación del Aire/efectos adversos , Exposición a Riesgos Ambientales/efectos adversos , Vesículas Extracelulares , Hipertensión Inducida en el Embarazo/etiología , Material Particulado/efectos adversos , Adulto , Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Estudios Transversales , Exposición a Riesgos Ambientales/análisis , Femenino , Humanos , Hipertensión Inducida en el Embarazo/epidemiología , Material Particulado/análisis , EmbarazoRESUMEN
Evaluation and validation studies of quantitative exposure models for occupational exposure assessment are still scarce and generally only consider a limited number of exposure scenarios. The aim of this review was to report the current state of knowledge of models' reliability in terms of precision, accuracy, and robustness. A systematic review was performed through searches of major scientific databases (Web of Science, Scopus, and PubMed), concerning reliability of Tier1 ("ECETOC TRA"-European Centre for Ecotoxicology and Toxicology of Chemicals Targeted Risk Assessment, MEASE, and EMKG-Expo-Tool) and Tier2 models (STOFFENMANAGER® and "ART"-Advanced Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) Tool). Forty-five studies were identified, and we report the complete information concerning model performance in different exposure scenarios, as well as between-user reliability. Different studies describe the ECETOC TRA model as insufficient conservative to be a Tier1 model, in different exposure scenarios. Contrariwise, MEASE and EMKG-Expo-Tool seem to be conservative enough, even if these models have not been deeply evaluated. STOFFENMANAGER® resulted the most balanced and robust model. Finally, ART was generally found to be the most accurate and precise model, with a medium level of conservatism. Overall, the results showed that no complete evaluation of the models has been conducted, suggesting the need for correct and harmonized validation of these tools.
Asunto(s)
Monitoreo del Ambiente/métodos , Exposición Profesional/análisis , Humanos , Reproducibilidad de los Resultados , Medición de Riesgo/métodosRESUMEN
Airborne particulate matter (PM) concentrations inside vehicle cabins are often extremely high compared to background levels. The present study was motivated by the fact that in the last few decades, the implementation of new emission standards has led to the reduction of vehicle particle emissions. This study addresses for the first time the relationship between leading vehicle (LV) emissions and in-cabin PM exposure levels in the immediately following vehicle (henceforth called the study vehicle - SV), with particular emphasis on the role of the LV's emission reduction technologies (e.g., diesel particulate filter-DPF) as an effective risk management measure. The study was performed using an instrumented study vehicle (always to be considered as the following vehicle) on a 26-km fixed route where 10 repeated tests were conducted during 60-minute trips. On-line monitoring of the fine 0.3-1⯵m and 1-2.5⯵m (PM0.3-1 and PM1-2.5) and ultra-fine particle (UFP) concentrations was performed inside the SV's car cabin with fixed ventilation settings (i.e., windows closed, air conditioning off, and recirculation fan off). Simultaneously, the license plate numbers of the LVs along the route were recorded to retrieve information pertaining to their fuel type and Euro emission standard category. The results clearly showed that the in-cabin PM levels were significantly affected by the LV's Euro emission standard. Regarding petrol-fuelled LVs, the median in-cabin particle exposure levels were statistically lower (e.g., -34% for PM0.3-1) when following vehicles with stricter emission standards (in particular, Euro 6) than when following a low-emission standard vehicle (i.e., Euro 0-2). Concerning diesel-fuelled LVs, a strong and significant decrease in the in-cabin median exposure levels (up to -62%, -44%, and -48% for UFPs, PM0.3-1, and PM1-2.5, respectively) was observed for recent-emission standards LVs (i.e., Euro 5-6) with respect to older-emission standard LVs (i.e., Euro 0-4). A specific analysis revealed that the in-cabin median exposure concentrations of PM were highly and significantly reduced by DPF-equipped LVs. For UFPs, this resulted in a 47% reduction compared to diesel-fuelled (non-DPF) LVs. For PM0.3-1, an approximate 80% reduction was observed compared to both petrol-fuelled and diesel-fuelled (non-DPF) LVs. For PM1-2.5, an approximate 38% reduction was observed compared to petrol-fuelled LVs and a 46% reduction compared to non-DPF LVs.
Asunto(s)
Contaminación del Aire/análisis , Material Particulado/análisis , Emisiones de Vehículos/análisis , Contaminantes Atmosféricos , Monitoreo del Ambiente , Gasolina , Humanos , Tamaño de la PartículaRESUMEN
An experimental probabilistic approach for health risk assessment was applied for graphene nanoplatelets (GNPs). The hazard assessment indicated a low level of toxicity for the GNPs. The benchmark dose method, based on sub-chronic and chronic inhalation exposure studies, was used to quantify a guidance value (BMCh) for occupational inhalation exposure to GNPs, expressed as a lognormal distribution with a geometric mean⯱â¯geometric standard deviation of 0.212⯱â¯7.79â¯mg/m3 and 9.37â¯×â¯104⯱â¯7.6 particle/cm3. Exposure scenarios (ES) were defined based on the scientific literature for large-scale production (ES1) and manufacturing (ES2) of GNPs; a third ES, concerning in-lab handling of GNPs (ES3) was based on results of experiments performed for this study. A probability distribution function was then assumed for each ES. The risk magnitude was calculated using a risk characterization ratio (RCR), defined as the ratio of the exposure distributions and the BMCh distribution. All three ES resulted in RCR distributions ≥1 (i.e. risk present); however, none of the ES had a statistically significant level of risk at a 95% confidence interval. A sensitivity analysis indicated that â¼75% of the variation in the RCR distributions was due to uncertainties in the BMCh calculation.