Stable Radical Isoporphyrin Copolymer Prepared with Di(phenylphosphane).

Two diphosphanes with variable-length ligands tested as nucleophiles to prepare isoporphyrin copolymers in the presence of ditolylporphyrin of zinc (ZnT2P) prevented the oxidation of the diphosphine ligand. This paper demonstrates the power of this approach and describes the photoelectrocatalytic properties. The obtained copolymers were characterized by UV-vis spectroscopy, X-ray photoelectron spectroscopy, atomic force micrograph (AFM), EQCM (Electrochemical Quartz Cristal Microbalance) and electrochemistry. Their impedance properties (EIS) were studied and their photovoltaic performances were also investigated by photocurrent transient measurements under visible light irradiation.

Synthesis, Characterization, and Properties of a Titanium(IV)-Tetrathiafulvalene-Based Complex.

To deeply investigate the interaction between a tetrathiafulvalene (TTF) unit and a Ti(IV) center, a monomeric heteroleptic octahedral Ti(IV) complex containing a diimine ligand composed of a 1,10-phenanthroline core fused with a TTF fragment (ligand 2a) was prepared. The stable complex formulated as Ti(1)2(2a), where 1 is a 2,2'-biphenolato derivative, was efficiently synthesized by following a one-step approach. This complex and its model species [Ti(1)2(2b)] were fully characterized in solution, and their solid-state structures were established by single-crystal X-ray diffraction analysis. Density functional theory calculations allowed the assignment of the frontier orbitals involved in the electronic transitions characterized by ultraviolet-visible absorption spectroscopy. Electrochemical and spectroelectrochemical studies revealed that the TTF unit within Ti(1)2(2a) can undergo two reversible one-electron oxidation processes; a reversible one-electron reduction of the Ti(IV) atom was highlighted. The photophysical measurements performed for this donor-acceptor molecular system indicated that an electron transfer process upon light excitation occurred within Ti(1)2(2a).

Electrode materials for electrochromic supercapacitors.

Smart energy storage systems, such as electrochromic supercapacitor (ECSC) integrated technology, have drawn a lot of attention recently, and numerous developments have been made owing to their reliable performance. Developing novel electrode materials for ECSCs that embed two different technologies in a material is an exciting and emerging field of research. To date, the research into ECSC electrode materials has been ongoing with excellent efforts, which need to be systematically reviewed so that they can be used to develop more efficient ECSCs. This mini-review provides a general composition, main evaluation parameters and future perspectives for electrode materials of ECSCs as well as a brief overview of the published reports on ECSCs and performance statistics on the existing literature in this field.

Syntheses and Electrochemical and EPR Studies of Porphyrins Functionalized with Bulky Aromatic Amine Donors.

A series of nickel(II) porphyrins bearing one or two bulky nitrogen donors at the meso positions were prepared by using Ullmann methodology or more classical Buchwald-Hartwig amination reactions to create the new C-N bonds. For several new compounds, single crystals were obtained, and the X-ray structures were solved. The electrochemical data of these compounds are reported. For a few representative examples, spectroelectrochemical measurements were used to clarify the electron exchange process. In addition, a detailed electron paramagnetic resonance (EPR) study was performed to estimate the extent of delocalization of the generated radical cations. In particular, electron nuclear double resonance spectroscopy (ENDOR) was used to determine the coupling constants. DFT calculations were conducted to corroborate the EPR spectroscopic data.

Proton-Conductive Supramolecular Hydrogen-Bonded Organic Superstructures for High-Performance Zinc-Organic Batteries.

With fast (de)coordination kinetics, the smallest and the lightest proton stands out as the most ideal charge carrier for aqueous Zn-organic batteries (ZOBs). Hydrogen-bonding networks with rapid Grotthuss proton conduction is particularly suitable for organic cathodes, yet not reported. We report the supramolecular self-assembly of cyanuric acid and 1,3,5-triazine-2,4,6-triamine into organic superstructures through in-plane H-bonds and out-of-plane π-π interaction. The supramolecular superstructures exhibit highly stable lock-and-key H-bonding networks with an ultralow activation energy for protonation (0.09 eV vs. 0.25 eV of zincification). Then, high-kinetics H+ coordination is prior to Zn2+ into protophilic C=O sites via a two-step nine-electron reaction. The assembled ZOBs show high-rate capability (135 mAh g-1 at 150 A g-1 ), high energy density (267 Wh kg-1 cathode ) and ultra-long life (50 000 cycles at 10 A g-1 ), becoming the state-of-the-art ZOBs in comprehensive performances.

A photo-switchable molecular capsule: sequential photoinduced processes.

The metastable trilacunary heteropolyoxomolybdate [PMo9O31(py)3]3- - {PMo9}; py = pyridine) and the ditopic pyridyl bearing diarylethene (DAE) (C25H16N2F6S2) self-assemble via a facile ligand replacement methodology to yield the photo-active molecular capsule [(PMo9O31)2(DAE)3]6-. The spatial arrangement and conformation of the three DAE ligands are directed by the surface chemistry of the molecular metal oxide precursor with exclusive ligation of the photo-active antiparallel rotamer to the polyoxometalate (POM) while the integrity of the assembly in solution has been verified by a suite of spectroscopic techniques. Electrocyclisation of the three DAEs occurs sequentially and has been investigated using a combination of steady-state and time-resolved spectroscopies with the discovery of a photochemical cascade whereby rapid photoinduced ring closure is followed by electron transfer from the ring-closed DAE to the POM in the latent donor-acceptor system on subsequent excitation. This interpretation is also supported by computational and detailed spectroelectrochemical analysis. Ring-closing quantum yields were also determined using a custom quantum yield determination setup (QYDS), providing insight into the impact of POM coordination on these processes.

Anionic Co-insertion Charge Storage in Dinitrobenzene Cathodes for High-Performance Aqueous Zinc-Organic Batteries.

Highly active and stable cathodes are critical for aqueous Zn-organic batteries with high capacity, fast redox kinetics, and long life. We herein report para-, meta-, and ortho-dinitrobenzene (p-, m-, and o-DB) containing two successive two-electron processes, as cathode materials to boost the battery performance. Theoretical and experimental studies reveal that nitro constitutional isomerism is key to zincophilic activity and redox kinetics. p-DB hosted in carbon nanoflower harvests a high capacity of 402 mAh g-1 and a superior stability up to 25 000 cycles at 5 A g-1 , giving a Zn-organic battery with a high energy density of 230 Wh kg-1 . An anionic co-insertion charge storage mechanism is proposed, entailing a two-step (de)coordination of Zn(CF3 SO3 )+ with nitro oxygen. Besides, dinitrobenzene can be electrochemically optimized by side group regulation via implanting electron-withdrawing motifs. This work opens a new window to design multielectron nitroaromatics for Zn-organic batteries.

Self-Assembled Carbon Superstructures Achieving Ultra-Stable and Fast Proton-Coupled Charge Storage Kinetics.

Designing ingenious and stable carbon nanostructures is critical but still challenging for use in energy storage devices with superior electrochemistry kinetics, durable capacitive activity, and high rate survivability. To pursue the objective, a simple self-assembly strategy is developed to access carbon superstructures built of nanoparticle embedded plates. The carbon precursors, 2,4,6-trichloro-1,3,5-triazine and 2,6-diaminoanthraquinone can form porous organic polymer with "protic salt"-type rigid skeleton linked by -NH2 + Cl- - "rivets", which provides the cornerstone for hydrogen-bonding-guided self-assembly of the organic backbone to superstructures by π-π plane stacking. The ameliorative charge density distribution and decreased adsorption energy in as-fabricated carbon superstructures allow the high accessibility of the build-in protophilic sites and efficient ion diffusion with a low energy barrier. Such superstructures thus deliver ultra-stable charge storage and fast proton-coupled kinetics at the structural-chemical defects, contributing to unprecedented lifespan (1 000 000 cycles), high-rate capability (100 A g-1 ) for carbon-based supercapacitors, and an ultrahigh energy density (128 Wh kg-1 ) for Zn-ion hybrid supercapacitors. The self-assembled carbon superstructures significantly improve the all-round electrochemical performances, and hold great promise for efficient energy storage.

Porphyrins and Polyoxometalate Scaffolds.

Polyoxometalates (POMs) can act as unique reservoirs for multiple electron transfers. As POMs display only weak absorption in the visible spectrum, they can be associated with chromophores such as porphyrins and porphyrin antennae. In this Minireview, the research dedicated to the combination of porphyrins and polyoxometalates is put in context and the state of the art identifying the challenges addressed in the optimization of hybrid materials for applications is detailed.

NiII 36 -Containing 54-Tungsto-6-Silicate: Synthesis, Structure, Magnetic and Electrochemical Studies.

The 36-NiII -containing 54-tungsto-6-silicate, [Ni36 (OH)18 (H2 O)36 (SiW9 O34 )6 ]6- (Ni36 ) was synthesized by a simple one-pot reaction of the Ni2 -pivalate complex [Ni2 (µ-OH2 )(O2 CCMe3 )4 (HO2 CCMe3 )4 ] with the trilacunary [SiW9 O34 ]10- polyanion precursor in water and structurally characterized by a multitude of physicochemical techniques including single-crystal XRD, FTIR, TGA, elemental analysis, magnetic and electrochemical studies. Polyanion Ni36 comprises six equivalent {NiII 6 SiW9 } units which are linked by Ni-O-W bridges forming a macrocyclic assembly. Magnetic studies demonstrate that the {Ni6 } building blocks in Ni36 remain magnetically intact while forming a hexagonal ring with antiferromagnetic exchange interactions between adjacent {Ni6 } units. Electrochemical studies indicate that the first reduction is reversible and associated with the WVI/V couple, whereas the second reduction is irreversible attributed to the NiII/0 couple.

Enhancement of photocurrent by incorporation of Preyssler type polyoxometalate protected nanoparticles in polyporphyrin films.

The introduction of nanoparticles (MNPs) at the surface of cationic poly-porphyrin films, obtained by electrostatic interaction between the bis-porphyrin copolymer and the Preyssler type polyoxometalate P5W30@MNPs, enhances the photocurrent (up to 2.5-3 times greater as a function of the used nanoparticle).

An Efficient Electrochromic Supercapacitor Based on Solution-Processable Nanoporous Poly{tris[4-(3,4-ethylenedioxythiophene)phenyl]amine}.

A new green synthetic route to tris[4-(3,4-ethylenedioxythiophene)phenyl]amine (TEPA) monomer has been developed and the molecular structure of TEPA has been determined by using single-crystal XRD. Solution-processable nanoporous poly{tris[4-(3,4-ethylenedioxythiophene)phenyl]amine} (PTEPA) is prepared by a chemical oxidative polymerization in a microemulsion. Based on the distorted structure of TEPA in the solid state, it is proposed that dendritic PTEPA has a distorted 3 D conformation with multiple twisted channels and pores that are narrowed and blocked by bifurcation and distortion of PTEPA, which is consistent with the observed hierarchical pore structure. As a cathode material, PTEPA exhibits a discharge capacity of 89.5 mAh g-1 in the initial cycle with a highly sloping two-stage discharge curve and relatively stable cycling performance. Beyond its excellent energy storage properties, PTEPA also shows relatively good electrochromic performance. Furthermore, an efficient all-solid-state electrochromic supercapacitor (ECSC) with good electrochromic performance and high energy storage capacity (13.3 mF cm-2 ) is assembled from PTEPA and nanoporous graphene films. During charge-discharge processes, the color of the ECSC changes between yellow-green and steel blue. Thus, the energy storage level of the ECSC can be monitored by the corresponding color changes. The fabricated ECSC may have practical applications, for example, in self-powered electrochromic smart windows.

Recycling Iron-Containing Sludges from the Electroflocculation of Printing and Dyeing Wastewater into Anode Materials for Lithium-Ion Batteries.

Iron-containing sludges (DW/Fe) were prepared by the electroflocculation of industrial printing and dyeing wastewater (DW). To investigate the formation process and the properties of the DW/Fe sludges and their application in anode materials in Li-ion batteries, the DW/Fe sludges were compared to three other sludges (MB/Fe, RB/Fe, Ta/Fe) prepared from model solutions that contained either methyl blue (MB), rhodamine B (RB), or tartrazine (Ta). The DW/Fe sludges were calcined at 500 °C under N2 to form iron oxide/carbon composite C-DW/Fe. The composition and structure of the sludges and the C-DW/Fe composite were analyzed by using FTIR spectroscopy, XRD, thermogravimetric analysis, SEM, TEM, and X-ray photoelectron spectroscopy, and their performances as anodes of Li-ion batteries were studied by adding different proportions of conductive agent (super P® conductive carbon black). Our results show that the sludges are a complex mixture of Fe3 O4 and organic matter. The specific capacity and stability can be improved during the charge-discharge test by increasing the amount of carbon black. Importantly, this improvement is more pronounced on DW/Fe that does not require high-temperature carbonization, which means that the sludges cannot only protect the environment and avoid the waste of resources but also can be used directly and widely in decentralized energy storage devices.

Polyoxovanadate-iodobodipy supramolecular assemblies: new agents for high efficiency cancer photochemotherapy.

Two novel polyoxovanadate-iodoBodipy supramolecular assemblies, named as (2I-BDP-C6)2V6 and (2I-BDP-C6)3V10, were first synthesized by the self-assembly of anionic hexavanadate and decavanadate with cationic iodoBodipy for photochemotherapy, respectively. The mechanisms for synergistic photochemotherapy of the anion-cation pairs were determined. In particular, (2I-BDP-C6)3V10 can effectively kill lung cancer cells (HepG2) by synergetic chemotherapy as well as photodynamic therapy.

Cyclic(Alkyl)(Amino)Carbene (CAAC)-Supported Zn Alkyls: Synthesis, Structure and Reactivity in Hydrosilylation Catalysis.

The reactivity of ZnII dialkyl species ZnMe2 with a cyclic(alkyl)(amino)carbene, 1-[2,6-bis(1-methylethyl)phenyl]-3,3,5,5-tetramethyl-2-pyrrolidinylidene (CAAC, 1), was studied and extended to the preparation of robust CAAC-supported ZnII Lewis acidic organocations. CAAC adduct of ZnMe2 (2), formed from a 1:1 mixture of 1 and ZnMe2 , is unstable at room temperature and readily undergoes a CAAC carbene insertion into the Zn-Me bond to produce the ZnX2 -type species (CAAC-Me)ZnMe (3), a reactivity further supported by DFT calculations. Despite its limited stability, adduct 2 was cleanly ionized to robust two-coordinate (CAAC)ZnMe+ cation (5+ ) and derived into (CAAC)ZnC6 F5 + (7+ ), both isolated as B(C6 F5 )4 - salts, showing the ability of CAAC for the stabilization of reactive [ZnMe]+ and [ZnC6 F5 ]+ moieties. Due to the lability of the CAAC-ZnMe2 bond, the formation of bis(CAAC) adduct (CAAC)2 ZnMe+ cation (6+ ) was also observed and the corresponding salt [6][B(C6 F5 )4 ] was structurally characterized. As estimated from experimental and calculations data, cations 5+ and 7+ are highly Lewis acidic species and the stronger Lewis acid 7+ effectively mediates alkene, alkyne and CO2 hydrosilylation catalysis. All supporting data hints at Lewis acid type activation-functionalization processes. Despite a lower energy LUMO in 5+ and 7+ , their observed reactivity is comparable to those of N-heterocyclic carbene (NHC) analogues, in line with charge-controlled reactions for carbene-stabilized ZnII organocations.

Synthesis of new Mn19 analogues and their structural, electrochemical and catalytic properties.

We report the synthesis and structural characterisation of new Mn19 and Mn18M analogues, [MnIII12MnII7(µ4-O)8(µ3-OCH3)2(µ3-Br)6(HLMe)12(MeOH)6]Br2 (2) and [MnIII12MnII6Sr(µ4-O8(µ3-Cl)8(HLMe)12(MeCN)6]Cl2 cluster (3), where H3LMe is 2,6-bis(hydroxymethyl)-p-cresol. The electrochemistry of 2 and 3 has been investigated and their activity as catalysts in the oxidation of benzyl alcohol has been evaluated. Selective oxidation of benzyl alcohol to benzaldehyde by O2 was achieved using 1 mol% of catalyst with conversions of 74% (2) and 60% (3) at 140 °C using TEMPO as a co-catalyst. No partial conversion of benzaldehyde to benzoic acid was observed. The results obtained revealed that different operative parameters - such as catalyst loading, temperature, time, solvent and the presence of molecular oxygen - played an important role in the selective oxidation of benzyl alcohol.

A Highly Stable Organic Radical Cation.

Functionalization of a methylviologen with four methyl ester substituents significantly facilitates the first two reduction steps. The easily generated radical cation shows markedly improved air stability compared to the parent methylviologen, making this derivative of interest in organic electronic applications.

Conjugated hybrid films based on a new polyoxotitanate monomer.

Electropolymerisation of the novel polyoxotitanate (POT) hexamer [Ti(µ3-O)(OiPr)(TA)]6 (TA = thiophene-3-acetate) with 3,4-ethylenedioxythiophene (EDOT) gives films of hybrid conjugated copolymer, Poly-(EDOT-POT)s, the morphologies of which are, uniquely, influenced by the electropolymerisation potential. Nanoporous Poly-(EDOT-POT)-1 is a fast-ion electrode material and has improved electrochromic properties and significantly higher capacitance than that of the parent poly(3,4-ethylenedioxythiophene) (PEDOT).

Anderson-Type Polyoxometalates Functionalized by Tetrathiafulvalene Groups: Synthesis, Electrochemical Studies, and NLO Properties.

Three polyoxometalates (POMs) functionalized by tetrathiafulvalene (TTF) molecules have been synthesized by a coupling reaction between the Anderson-type POMs [MnMo6O18{(OCH2)3CNH2}2]3- or [AlMo6O18(OH)3{(OCH2)3CNH2}]3- and the TTF carboxylic acid derivative (MeS)3TTF(S-CH2-CO2H). The monofunctionalized TTF-AlMo6 POM contains one TTF group covalently grafted on an Al Anderson platform. The symmetrical TTF-MnMo6-TTF POM possesses two TTF groups grafted on each side of a Mn Anderson derivative while the asymmetrical TTF-MnMo6-SP POM contains a TTF and a spiropyran groups. These three trianionic species have been characterized by elemental analysis, 1H and 13C NMR, FT-IR spectroscopy, ESI-MS spectrometry, and single-crystal X-ray diffraction (for TTF-MnMo6-TTF). In the solid state, the grafted TTF molecules of TTF-MnMo6-TTF POMs interact via S···S and π···π interactions and form chains. The electrochemical properties of the complexes reflect the contributions of both the inorganic POM and the TTF moieties. Despite adsorption of the oxidized hybrid species on the Pt grid working electrode, UV-vis-NIR spectroelectrochemical investigations evidence peaks characteristic of the oxidation of the TTF units. Finally, hyper-Rayleigh scattering (HRS) measurements show that the three novel TTF derivatives exhibit ß values between 20 and 37 × 10-30 esu. Moreover it is observed that the oxidation of the TTF moieties by Fe3+ ions increases the NLO response. These values are in the order of magnitude of that found for the well-known 4-dimethylamino- N-methyl-4-stilbazolium (DAS+) cation (ß = 60 × 10-30 esu).