RESUMEN
Understanding the behavior of water molecules at solid-liquid interfaces is crucial for various applications such as photocatalytic water splitting, a key technology for sustainable fuel production and chemical transformations. Despite extensive studies conducted in the past, the impact of the microscopic structure of interfacial water molecules on photocatalytic reactivity has not been directly examined. In this study, using real-time mass spectrometry and Fourier-transform infrared spectroscopy, we demonstrated the crucial role of hydrogen bond (H-bond) networks on the photocatalytic hydrogen evolution in thickness-controlled water adsorption layers on various TiO2 photocatalysts. Under controlled water vapor environments with relative humidity (RH) below 70%, we observed a monotonic increase in the H2 formation rate with increasing RH, indicating that reactive water molecules were present not only in the first adsorbed layer but also in several overlying layers. In contrast, at RH > 70%, when more than three water layers covered the catalyst surface, the H2 formation rate turned to decrease dramatically because of the structural rearrangement and hardening of the interfacial H-bond network induced during further water adsorption. This unique many-body effect of interfacial water was consistently observed for various TiO2 particles with different crystalline structures, including brookite, anatase, and a mixture of anatase and rutile. Our results demonstrated that depositing several water layers in a water vapor environment with RH â¼ 70% is optimal for photocatalytic hydrogen evolution rather than liquid-phase reaction conditions in aqueous solutions. This study provides molecular-level insights into designing interfacial water conditions to enhance photocatalytic performance.
RESUMEN
This study investigates the hydrogen evolution reaction (HER) efficiency of two photosystems incorporating an all-inorganic molecular thiomolybdate [Mo3S13]2- cluster as a HER catalyst. First, we delve into the performance of a homogeneous [Mo3S13]2-/[Ru(bpy)3]2+ (Mo3/Ru) dyad which demonstrates high turnover frequencies (TOFs) and apparent quantum yields (AQYs) at 445 nm approaching the level of 0.5%, yet its performance is marked by pronounced deactivation. In contrast, a heterogeneous approach involves anchoring [Mo3S13]2- onto graphitic carbon nitride (GCN) nanosheets through weak electrostatic association with its triazine/heptazine scaffold. [Mo3S13]2-/GCN (Mo3/GCN) displays effective H2 generation under visible light, with TOF metrics on par with those of its homogeneous analog. Although substantial leaching of [Mo3S13]2- species from the Mo3/GCN surface occurs, the remaining {Mo3}-based centers demonstrate impressive stability, leading to enduring HER performance, starkly distinguishing it from the homogeneous Mo3/Ru photosystem. Photoluminescence (PL) quenching experiments confirm that the performance of Mo3/GCN is not limited by the quality of the inorganic interface, but could be optimized by using higher surface area supports or a higher concentration of [Mo3S13]2- sites. Our findings showcase complexities underlying the evaluation and comparison of photosystems comprising well-defined catalytic centers and pave the way for developing analogous surface-supported (photo)catalysts with broad use in energy applications.
RESUMEN
Time-resolved or time-correlation measurements using cathodoluminescence (CL) reveal the electronic and optical properties of semiconductors, such as their carrier lifetimes, at the nanoscale. However, halide perovskites, which are promising optoelectronic materials, exhibit significantly different decay dynamics in their CL and photoluminescence (PL). We conducted time-correlation CL measurements of CsPbBr3 using Hanbury Brown-Twiss interferometry and compared them with time-resolved PL. The measured CL decay time was on the order of subnanoseconds and was faster than PL decay at an excited carrier density of 2.1 × 1018 cm-3. Our experiment and analytical model revealed the CL dynamics induced by individual electron incidences, which are characterized by highly localized carrier generation followed by a rapid decrease in carrier density due to diffusion. This carrier diffusion can play a dominant role in the CL decay time for undoped semiconductors, in general, when the diffusion dynamics are faster than the carrier recombination.
RESUMEN
In-situ observation has expanded the application of transmission electron microscopy (TEM) and has made a significant contribution to materials research and development for energy, biomedical, quantum, etc. Recent technological developments related to in-situ TEM have empowered the incorporation of three-dimensional observation, which was previously considered incompatible. In this review article, we take up heating as the most commonly used external stimulus for in-situ TEM observation and overview recent in-situ TEM studies. Then, we focus on the electron tomography (ET) and in-situ heating combined observation by introducing the authors' recent research as an example. Assuming that in-situ heating observation is expanded from two dimensions to three dimensions using a conventional TEM apparatus and a commercially available in-situ heating specimen holder, the following in-situ heating-and-ET observation procedure is proposed: (i) use a rapid heating-and-cooling function of a micro-electro-mechanical system holder; (ii) heat and cool the specimen intermittently and (iii) acquire a tilt-series dataset when the specimen heating is stopped. This procedure is not too technically challenging and can have a wide range of applications. Essential technical points for a successful 4D (space and time) observation will be discussed through reviewing the authors' example application.
RESUMEN
OBJECTIVES: Atypical femoral fracture (AFF) is an atypical low-energy subtrochanteric and diaphyseal femoral fracture. Even if bone fusion is achieved in patients with AFF, the risk of AFF in the contralateral femur must be considered. This study aimed to investigate the factors affecting complete AFF in the contralateral femur and conservatively treated incomplete AFF. SUBJECT AND METHODS: Radiographs of 111 femurs in 104 AFF cases were examined, and the femurs were classified as follows: 85 contralateral femurs with complete AFF; 18 contralateral femurs with incomplete AFF; 8 femurs with incomplete AFF without surgical treatment. Various patients' clinical data were collected, and we investigated the factors affecting the second complete AFF. RESULTS: Complete fractures occurred in 10 (9.7%) of 103 femurs without incomplete AFF at the first visit and in 3 (37.5%) of 8 femurs with incomplete AFF. The Kaplan-Meier curve revealed that lateral cortical bone thickening and thigh pain were associated with significantly poorer prognoses (p = 0.026 and p = 0.013, respectively). Multivariate analyses revealed that eldecalcitol usage after AFF onset (p = 0.0094) and previous use of bisphosphonate or denosumab (p = 0.0126) were protective factors for second complete AFF and that the presence of thigh pain (p = 0.0134) was a risk factor for second complete AFF. CONCLUSIONS: Eldecalcitol administration after bone union of first AFF may prevent AFF recurrence. In addition, painful incomplete AFF has a high risk of developing a complete fracture.
Asunto(s)
Conservadores de la Densidad Ósea , Fracturas del Fémur , Humanos , Conservadores de la Densidad Ósea/uso terapéutico , Difosfonatos/uso terapéutico , Fracturas del Fémur/diagnóstico por imagen , Fracturas del Fémur/cirugía , Fracturas del Fémur/tratamiento farmacológico , Fémur , Dolor/tratamiento farmacológicoRESUMEN
Host plant-derived strigolactones trigger hyphal branching in arbuscular mycorrhizal (AM) fungi, initiating a symbiotic interaction between land plants and AM fungi. However, our previous studies revealed that gibberellin-treated lisianthus (Eustoma grandiflorum, Gentianaceae) activates rhizospheric hyphal branching in AM fungi using unidentified molecules other than strigolactones. In this study, we analyzed independent transcriptomic data of E. grandiflorum and found that the biosynthesis of gentiopicroside (GPS) and swertiamarin (SWM), characteristic monoterpene glucosides in Gentianaceae, was upregulated in gibberellin-treated E. grandiflorum roots. Moreover, these metabolites considerably promoted hyphal branching in the Glomeraceae AM fungi Rhizophagus irregularis and Rhizophagus clarus. GPS treatment also enhanced R. irregularis colonization of the monocotyledonous crop chive (Allium schoenoprasum). Interestingly, these metabolites did not provoke the germination of the root parasitic plant common broomrape (Orobanche minor). Altogether, our study unveiled the role of GPS and SWM in activating the symbiotic relationship between AM fungi and E. grandiflorum.
Asunto(s)
Liliaceae , Micorrizas , Orobanche , Micorrizas/fisiología , Giberelinas/metabolismo , Glucósidos/metabolismo , Raíces de Plantas/metabolismo , Hongos , Hifa , Simbiosis/fisiología , PlantasRESUMEN
Environmentally sustainable and selective conversion of methane to valuable chemicals under ambient conditions is pivotal for the development of next-generation photocatalytic technology. However, due to the lack of microscopic knowledge about non-thermal methane conversion, controlling and modulating photocatalytic oxidation processes driven by photogenerated holes remain a challenge. Here, we report novel function of metal cocatalysts to accept photogenerated holes and dominate selectivity of methane oxidation, which is clearly beyond the conventional concept in photocatalysis that the metal cocatalysts loaded on the surfaces of semiconductor photocatalysts mostly capture photogenerated electrons and dominate reduction reactions exclusively. The novel photocatalytic role of metal cocatalysts was verified by operando molecular spectroscopy combined with real-time mass spectrometry for metal-loaded Ga2 O3 model photocatalysts under methane and water vapor at ambient temperature and pressure. Our concept of metal cocatalysts that work as active sites for both photocatalytic oxidation and reduction provides a new understanding of photocatalysis and a solid basis for controlling non-thermal redox reactions by metal-cocatalyst engineering.
RESUMEN
The nanoscale characterization of thermally activated solid reactions plays a pivotal role in products manufactured by nanotechnology. Recently, in situ observation in transmission electron microscopy combined with electron tomography, namely four-dimensional observation for heat treatment of nanomaterials, has attracted great interest. However, because most nanomaterials are highly reactive, i.e., oxidation during transfer and electron beam irradiation would likely cause fatal artefacts; it is challenging to perform the artifact-free four-dimensional observation. Herein, we demonstrate our development of a novel in situ three-dimensional electron microscopy technique for thermally activated solid-state reaction processes in nanoparticles (NPs). The sintering behaviour of Cu NPs was successfully visualized and analyzed in four-dimensional space-time. An advanced image processing protocol and a newly designed state-of-the-art MEMS-based heating holder enable the implementation of considerably low electron dose imaging and prevent air exposure, which is of central importance in this type of observation. The total amount of electron dose for a single set of tilt-series images was reduced to 250 e- nm-2, which is the lowest level for inorganic materials electron tomography experiments. This study evaluated the sintering behaviour of Cu NPs in terms of variations in neck growth and particle distance. A negative correlation between the two parameters is shown, except for the particle pair bound by neighbouring NPs. The nanoscale characteristic sintering behavior of neck growth was also captured in this study.
Asunto(s)
Tomografía con Microscopio Electrónico , Nanopartículas , Anaerobiosis , Microscopía Electrónica de Transmisión , Microscopía ElectrónicaRESUMEN
Artificially programming a sequence of organic-metal oxide multilayers (superlattices) by using atomic layer deposition (ALD) is a fascinating and challenging issue in material chemistry. However, the complex chemical reactions between ALD precursors and organic layer surfaces have limited their applications for various material combinations. Here, we demonstrate the impact of interfacial molecular compatibility on the formation of organic-metal oxide superlattices using ALD. The effects of both organic and inorganic compositions on the metal oxide layer formation processes onto self-assembled monolayers (SAM) were examined by using scanning transmission electron microscopy, in situ quartz crystal microbalance measurements, and Fourier-transformed infrared spectroscopy. These series of experiments reveal that the terminal group of organic SAM molecules must satisfy two conflicting requirements, the first of which is to promptly react with ALD precursors and the second is not to bind strongly to the bottom metal oxide layers to avoid undesired SAM conformations. OH-terminated phosphate aliphatic molecules, which we have synthesized, were identified as one of the best candidates for such a purpose. Molecular compatibility between metal oxide precursors and the -OHs must be properly considered to form superlattices. In addition, it is also important to form densely packed and all-trans-like SAMs to maximize the surface density of reactive -OHs on the SAMs. Based on these design strategies for organic-metal oxide superlattices, we have successfully fabricated various superlattices composed of metal oxides (Al-, Hf-, Mg-, Sn-, Ti-, and Zr oxides) and their multilayered structures.
RESUMEN
Without a protective atmosphere, space-exposed surfaces of airless Solar System bodies gradually experience an alteration in composition, structure and optical properties through a collective process called space weathering. The return of samples from near-Earth asteroid (162173) Ryugu by Hayabusa2 provides the first opportunity for laboratory study of space-weathering signatures on the most abundant type of inner solar system body: a C-type asteroid, composed of materials largely unchanged since the formation of the Solar System. Weathered Ryugu grains show areas of surface amorphization and partial melting of phyllosilicates, in which reduction from Fe3+ to Fe2+ and dehydration developed. Space weathering probably contributed to dehydration by dehydroxylation of Ryugu surface phyllosilicates that had already lost interlayer water molecules and to weakening of the 2.7 µm hydroxyl (-OH) band in reflectance spectra. For C-type asteroids in general, this indicates that a weak 2.7 µm band can signify space-weathering-induced surface dehydration, rather than bulk volatile loss.
RESUMEN
On-site and on-demand photocatalytic methane conversion under ambient conditions is one of the urgent global challenges for the sustainable use of ubiquitous methane resources. However, the lack of microscopic knowledge on its reaction mechanism prevents the development of engineering strategies for methane photocatalysis. Combining real-time mass spectrometry and operando infrared absorption spectroscopy with ab initio molecular dynamics simulations, here we report key molecular-level insights into photocatalytic green utilization of methane. Activation of the robust C-H bond of methane is hardly induced by the direct interaction with photogenerated holes trapped at the surface of photocatalyst; instead, the C-H activation is significantly promoted by the photoactivated interfacial water species. The interfacial water hydrates and properly stabilizes hydrocarbon radical intermediates, thereby suppressing their overstabilization. Owing to these water-assisted effects, the photocatalytic conversion rates of methane under wet conditions are dramatically improved by typically more than 30 times at ambient temperatures (~300 K) and pressures (~1 atm) in comparison to those under dry conditions. This study sheds new light on the role of interfacial water and provides a firm basis for design strategies for non-thermal heterogeneous catalysis of methane under ambient conditions.
RESUMEN
Electron tomography (ET) is a powerful tool for elucidating the properties and functionalities of materials. The innovative development of aberration-corrected electron microscopy in the early 21st century and the remarkable progress in the development of detectors, equipment and devices related to ET have resulted in substantial improvements in resolution. However, not only advances in hardware but also remarkable developments in reconstruction algorithms and related three-dimensional (3D) analysis methods have contributed to the resolution improvements. ET has its own problems, including the missing-wedge problem due to the limited tilt-angle range and the need to acquire numerous specimen-tilt images, the latter of which is time-consuming and can potentially damage the specimen. This review paper aims to (i) describe the established basic theories and definitions regarding 3D resolution of ET and practical 3D resolution measurement methods, (ii) discuss various reconstruction algorithms that effectively overcome the aforementioned problems and (iii) describe recent progress in the core of ET applications in materials science with respect to atomic ET, analytical ET and in-situ ET. The aforementioned ET problems have been addressed with each method developed in each field of application. Notably, in terms of aim (ii), recently developed reconstruction algorithms can reduce the number of projection images (specimen-tilt images) needed to attain a certain resolution without violating the Nyquist criterion. This approach is interpreted as a novel non-linear sampling theorem.
RESUMEN
Objectives: Chronic kidney disease (CKD) complicated by secondary hyperparathyroidism (SHPT) is associated with an increased risk of fragility fractures. Etelcalcetide (EC) is a treatment for SHPT that reduces serum parathyroid hormone (PTH) levels. However, the effects of combined treatment with osteoporosis drugs such as teriparatide (TPTD) remain unclear. This study investigates the combined effects of EC and TPTD on bone in CKD model rats. Methods: The CKD model was established in 8-week-old male Wistar rats by feeding them a 0.75% adenine diet for 4 weeks. At 20 weeks of age, the rats were divided into 4 groups (N = 9-10 in each group): CKD group (vehicle administration), TPTD group (30 µg/kg, 3 times/week), EC group (0.6 mg/kg, daily), and Comb group (TPTD and EC combined). EC was injected for 12 weeks starting at 20 weeks of age, and TPTD was injected for 8 weeks starting at 24 weeks of age. After treatment, the followings were evaluated: bone mineral density, bone strength, biochemical tests, bone and fat histomorphometry, and micro-computed tomography. Results: In CKD model rats, the combination of EC and TPTD was more effective in increasing cortical bone thickness and bone strength and inhibiting porosity. In addition, the combined treatment decreased bone marrow adiposity and fibrosis, and it increased bone mass and improved bone microstructure in trabecular bone. Conclusions: With the observed benefits such as improved bone mass, bone strength, structural properties, and bone marrow adiposity, combination therapy may be a potential way to improve bone fragility in CKD.
RESUMEN
Introduction: Humans mainly utilize visual and auditory information as a cue to infer others' emotions. Previous neuroimaging studies have shown the neural basis of memory processing based on facial expression, but few studies have examined it based on vocal cues. Thus, we aimed to investigate brain regions associated with emotional judgment based on vocal cues using an N-back task paradigm. Methods: Thirty participants performed N-back tasks requiring them to judge emotion or gender from voices that contained both emotion and gender information. During these tasks, cerebral hemodynamic response was measured using functional near-infrared spectroscopy (fNIRS). Results: The results revealed that during the Emotion 2-back task there was significant activation in the frontal area, including the right precentral and inferior frontal gyri, possibly reflecting the function of an attentional network with auditory top-down processing. In addition, there was significant activation in the ventrolateral prefrontal cortex, which is known to be a major part of the working memory center. Discussion: These results suggest that, compared to judging the gender of voice stimuli, when judging emotional information, attention is directed more deeply and demands for higher-order cognition, including working memory, are greater. We have revealed for the first time the specific neural basis for emotional judgments based on vocal cues compared to that for gender judgments based on vocal cues.
RESUMEN
BACKGROUND/AIM: This study evaluated the effect of haematogenous administration of acridine orange (AO) alone and in combination with zoledronate (ZOL) on bone metastases. MATERIALS AND METHODS: E0771 cells (1.0×105 cells/10 µl) were injected directly into the right femur of female mice. The mice were divided into five groups according to treatment (drugs and irradiation) and were reared and sacrificed after 6 weeks. Micro-computed tomography (µCT) was performed to calculate the destruction rate of the femur bone. We measured tumour weight and volume at sacrifice and performed terminal deoxynucleotidyl transferase dUTP Nick-End Labelling staining of tumours. RESULTS: At 4 weeks, the bone destruction rate was lower in the AO+ZOL group than in the radiation group. At 6 weeks, the AO+ZOL group had a lower bone destruction rate than the control and radiation groups; the ZOL group had a lower rate than the radiation group. The AO and AO+ZOL groups had suppressed tumour weight and volume compared to the control and radiation groups. The number of extraosseous apoptotic cells was higher in the AO+ZOL group than in all other groups except the AO group. CONCLUSION: In a model of local bone metastasis of breast cancer, haematogenous administration of AO reduced tumour size and more so when combined with ZOL.
Asunto(s)
Conservadores de la Densidad Ósea , Neoplasias Óseas , Neoplasias de la Mama , Osteólisis , Animales , Femenino , Ratones , Naranja de Acridina/uso terapéutico , Conservadores de la Densidad Ósea/uso terapéutico , Neoplasias Óseas/tratamiento farmacológico , Neoplasias Óseas/secundario , Difosfonatos , ADN Nucleotidilexotransferasa , Imidazoles/uso terapéutico , Osteólisis/tratamiento farmacológico , Microtomografía por Rayos X , Ácido Zoledrónico/uso terapéutico , Neoplasias de la Mama/tratamiento farmacológicoRESUMEN
Application of scanning transmission electron microscopy (STEM) to in situ observation will be essential in the current and emerging data-driven materials science by taking STEM's high affinity with various analytical options into account. As is well known, STEM's image acquisition time needs to be further shortened to capture a targeted phenomenon in real-time as STEM's current temporal resolution is far below the conventional TEM's. However, rapid image acquisition in the millisecond per frame or faster generally causes image distortion, poor electron signals, and unidirectional blurring, which are obstacles for realizing video-rate STEM observation. Here we show an image correction framework integrating deep learning (DL)-based denoising and image distortion correction schemes optimized for STEM rapid image acquisition. By comparing a series of distortion corrected rapid scan images with corresponding regular scan speed images, the trained DL network is shown to remove not only the statistical noise but also the unidirectional blurring. This result demonstrates that rapid as well as high-quality image acquisition by STEM without hardware modification can be established by the DL. The DL-based noise filter could be applied to in-situ observation, such as dislocation activities under external stimuli, with high spatio-temporal resolution.
Asunto(s)
Aprendizaje Profundo , Diagnóstico por Imagen , Procesamiento de Imagen Asistido por Computador/métodos , Microscopía Electrónica de Transmisión de Rastreo , Relación Señal-RuidoRESUMEN
The ongoing transition to renewable energy sources and the implementation of artificial photosynthetic setups call for an efficient and stable water oxidation catalyst (WOC). Here, we heterogenize a molecular all-inorganic [CoIIICoII(H2O)W11O39]7- ({CoIIICoIIW11}) Keggin-type polyoxometalate (POM) onto a model TiO2 surface, employing a 3-aminopropyltriethoxysilane (APTES) linker to form a novel heterogeneous photosystem for light-driven water oxidation. The {CoIIICoIIW11}-APTES-TiO2 hybrid is characterized using a set of spectroscopic and microscopic techniques to reveal the POM integrity and dispersion to elucidate the POM/APTES and APTES/TiO2 binding modes as well as to visualize the attachment of individual clusters. We conduct photocatalytic studies under heterogeneous and homogeneous conditions and show that {CoIIICoIIW11}-APTES-TiO2 performs as an active light-driven WOC, wherein {CoIIICoIIW11} acts as a stable co-catalyst for water oxidation. In contrast to the homogeneous WOC performance of this POM, the heterogenized photosystem yields a constant WOC rate for at least 10 h without any apparent deactivation, demonstrating that TiO2 not only stabilizes the POM but also acts as a photosensitizer. Complementary studies using photoluminescence (PL) emission spectroscopy elucidate the charge transfer mechanism and enhanced WOC activity. The {CoIIICoIIW11}-APTES-TiO2 photocatalyst serves as a prime example of a hybrid homogeneous-heterogeneous photosystem that combines the advantages of solid-state absorbers and well-defined molecular co-catalysts, which will be of interest to both scientific communities and applications in photoelectrocatalysis and CO2 reduction.
RESUMEN
Achieving light-driven splitting of water with high efficiency remains a challenging task on the way to solar fuel exploration. In this work, to combine the advantages of heterogeneous and homogeneous photosystems, we covalently anchor noble-metal- and carbon-free thiomolybdate [Mo3S13]2- clusters onto photoactive metal oxide supports to act as molecular co-catalysts for photocatalytic water splitting. We demonstrate that strong and surface-limited binding of the [Mo3S13]2- to the oxide surfaces takes place. The attachment involves the loss of the majority of the terminal S2 2- groups, upon which Mo-O-Ti bonds with the hydroxylated TiO2 surface are established. The heterogenized [Mo3S13]2- clusters are active and stable co-catalysts for the light-driven hydrogen evolution reaction (HER) with performance close to the level of the benchmark Pt. Optimal HER rates are achieved for 2 wt % cluster loadings, which we relate to the accessibility of the TiO2 surface required for efficient hole scavenging. We further elucidate the active HER sites by applying thermal post-treatments in air and N2. Our data demonstrate the importance of the trinuclear core of the [Mo3S13]2- cluster and suggest bridging S2 2- and vacant coordination sites at the Mo centers as likely HER active sites. This work provides a prime example for the successful heterogenization of an inorganic molecular cluster as a co-catalyst for light-driven HER and gives the incentive to explore other thio(oxo)metalates.
RESUMEN
All-solid-state Li batteries have attracted significant attention because of their high energy density and high level of safety. In a solid-state Li-ion battery, the electrodes contain a solid electrolyte that does not contribute directly to the capacity. Therefore, a battery that does not require a solid electrolyte in its electrode mixture should exhibit a higher energy density. In this study, a MgH2 electrode was used as the negative electrode material without a solid electrolyte in its mixture. The resultant battery demonstrated excellent performance because of the formation of an ionic conduction path based on LiH in the electrode mixture. LiH and Mg clearly formed upon lithiation and returned to MgH2 upon delithiation as revealed by TEM-EELS analysis. This mechanism of in situ electrolyte formation enables the development of a solid-state battery with a high energy density.
RESUMEN
Arbuscular mycorrhizal (AM) fungi allocate mineral nutrients to their host plants, and the hosts supply carbohydrates and lipids to the fungal symbionts in return. The morphotypes of intraradical hyphae are primarily determined on the plant side into Arum- and Paris-type AMs. As an exception, Solanum lycopersicum (tomato) forms both types of AMs depending on the fungal species. Previously, we have shown the existence of diverse regulatory mechanisms in Arum- and Paris-type AM symbioses in response to gibberellin (GA) among different host species. However, due to the design of the study, it remained possible that the use of different plant species influenced the results. Here, we used tomato plants to compare the transcriptional responses during Arum- and Paris-type AM symbioses in a single plant species. The tomato plants inoculated with Rhizophagus irregularis or Gigaspora margarita exhibited Arum- and Paris-type AMs, respectively, and demonstrated similar colonization rates and shoot biomass. Comparative transcriptomics showed shared expression patterns of AM-related genes in tomato roots upon each fungal infection. On the contrary, the defense response and GA biosynthetic process was transcriptionally upregulated during Paris-type AM symbiosis. Thus, both shared and different transcriptional reprogramming function in establishing Arum- and Paris-type AM symbioses in tomato plants.