X-ray imaging detector for radiological applications adapted to the context and requirements of low- and middle-income countries.

This paper describes the development of a novel medical x-ray imaging system adapted to the needs and constraints of low- and middle-income countries. The developed system is based on an indirect conversion chain: a scintillator plate produces visible light when excited by the x rays, and then, a calibrated multi-camera architecture converts the visible light from the scintillator into a set of digital images. The partial images are then unwarped, enhanced, and stitched through parallel field programmable gate array processing units and specialized software. All the detector components were carefully selected focusing on optimizing the system's image quality, robustness, cost-effectiveness, and capability to work in harsh tropical environments. With this aim, different customized and commercial components were characterized. The resulting detector can generate high quality medical diagnostic images with detective quantum efficiency levels up to 60% (@2.34 µGy), even under harsh environments, i.e., 60 °C and 98% humidity.

Crossed fiber optic Bessel beams for curvilinear optofluidic transport of dielectric particles.

Due to its unique non-diffracting and self-reconstructing nature, Bessel beams have been successfully adopted to trap multiple particles along the beam's axial direction. However, prior bulk-optic based Bessel beams have a fundamental form-factor limitation for in situ, in-vitro, and in-vivo applications. Here we present a novel implementation of Fourier optics along a single strand of hybrid optical fiber in a monolithic manner that can generate pseudo Bessel beam arrays in two-dimensional space. We successfully demonstrate unique optofluidic transport of the trapped dielectric particles along a curvilinear optical route by multiplexing the fiber optic pseudo Bessel beams. The proposed technique can form a new building block to realize reconfigurable optofluidic transportation of particulates that can break the limitations of both prior bulk-optic Bessel beam generation techniques and conventional microfluidic channels.

Individual particle handling in a microfluidic system based on parallel laser trapping.

We present an optical trapping system combining individually addressable multiple laser traps with fluorescence spectroscopy. An in-line set of 64 near-IR laser diodes is used to create a line of individually addressable traps inside a microfluidic chip. This system is completed by an excitation/detection line for spectrally resolved fluorescence imaging of trapped particles. Highly parallel trapping in a constant flow (up to a few millimeters per second), fast particle handling rates (up to a few particles per second), and the possibility of recording fluorescence spectra of trapped objects lead to a performing bioanalytical platform, e.g., for highly parallel analysis and sorting.

Microfluidic array cytometer based on refractive optical tweezers for parallel trapping, imaging and sorting of individual cells.

Analysis of genetic and functional variability in populations of living cells requires experimental techniques capable of monitoring cellular processes such as cell signaling of many single cells in parallel while offering the possibility to sort interesting cell phenotypes for further investigations. Although flow cytometry is able to sequentially probe and sort thousands of cells per second, dynamic processes cannot be experimentally accessed on single cells due to the sub-second sampling time. Cellular dynamics can be measured by image cytometry of surface-immobilized cells, however, cell sorting is complicated under these conditions due to cell attachment. We here developed a cytometric tool based on refractive multiple optical tweezers combined with microfluidics and optical microscopy. We demonstrate contact-free immobilization of more than 200 yeast cells into a high-density array of optical traps in a microfluidic chip. The cell array could be moved to specific locations of the chip enabling us to expose in a controlled manner the cells to reagents and to analyze the responses of individual cells in a highly parallel format using fluorescence microscopy. We further established a method to sort single cells within the microfluidic device using an additional steerable optical trap. Ratiometric fluorescence imaging of intracellular pH of trapped yeast cells allowed us on the one hand to measure the effect of the trapping laser on the cells' viability and on the other hand to probe the dynamic response of the cells upon glucose sensing.

Three-dimensional force measurements in optical tweezers formed with high-NA micromirrors.

The three-dimensional trap stiffness of optical tweezers formed with high-NA micromirrors is investigated by back-focal-plane interferometry and power spectrum analysis. Normalized stiffness values of kappaxy/Ptrap=1.2(microN/m)/mW and kappaz/Ptrap=0.52(microN/m)/mW in the transverse and axial directions, respectively, have been measured for polystyrene spheres with a radius of 1.03 microm. Compared with high-NA microscope objectives, micromirrors achieve much better trapping performances, particularly in the axial direction.

Lu, Gd codoped KY(WO(4))(2):Yb epitaxial layers: towards integrated optics based on KY(WO(4))(2).

Codoping KY(WO(4))(2):Yb layers with optically inert Lu and Gd ions allows a large increase of the refractive index contrast with respect to KY(WO(4))(2) substrates. This paves the way for the realization of integrated optical circuits based on this very promising material. First riblike waveguide structures have been fabricated and propagation losses below 1 dB/cm have been evaluated. A Y-junction with a splitting ratio close to 1:1 and additional losses of 1.4 dB has also been demonstrated.

Absence of UV-induced stress in Bragg gratings recorded by high-intensity 264 nm laser pulses in a hydrogenated standard telecom fiber.

We report on photochemical two-photon Bragg grating preparation in hydrogenated fiber without any UV-induced stress in the core or cladding, leaving only the color-center model responsible for refractive index changes for UV femtosecond irradiation. Without hydrogen loading strong stress changes are observed in the core and in the cladding indicating glass compaction. The irradiation does not change the inelastic strains, in contrast to H(2)-loading.

Miniaturized high-NA focusing-mirror multiple optical tweezers.

An array of high numerical aperture parabolic micromirrors (NA = 0.96) is used to generate multiple optical tweezers and to trap micron-sized dielectric particles in three dimensions within a fluidic device. The array of micromirrors allows generating arbitrarily large numbers of 3D traps, since the whole trapping area is not restricted by the field-of-view of the high-NA microscope objectives used in traditional tweezers arrangements. Trapping efficiencies of Q(max) r approximately = 0.22, comparable to those of conventional tweezers, have been measured. Moreover, individual fluorescence light from all the trapped particles can be collected simultaneously with the high-NA of the micromirrors. This is demonstrated experimentally by capturing more than 100 fluorescent micro-beads in a fluidic environment. Micromirrors may easily be integrated in microfluidic devices, offering a simple and very efficient solution for miniaturized optical traps in lab-on-a-chip devices.

Escape trajectories of single-beam optically trapped micro-particles in a transverse fluid flow.

We have studied the transverse and axial equilibrium positions of dielectric micro-spheres trapped in a single-beam gradient optical trap and exposed to an increasing fluid flow transverse to the trapping beam axis. It is demonstrated that the axial equilibrium position of a trapped micro-sphere is a function of its transverse position in the trapping beam. Moreover, although the applied drag-force acts perpendicularly to the beam axis, reaching a certain distance r(0) from the beam axis (r(0)/a approximately 0.6, a being the sphere radius) the particle escapes the trap due to a breaking axial equilibrium before the actual maximum transverse trapping force is reached. The comparison between a theoretical model and the measurements shows that neglecting these axial equilibrium considerations leads to a theoretical overestimation in the maximal optical transverse trapping forces of up to 50%.

Distributed measurements of fiber birefringence and diametric load using optical low-coherence reflectometry and fiber gratings.

Polarization sensitive optical low-coherence reflectometry (OLCR) is used for measuring the complex fiber Bragg gratings (FBG) reflection coefficient. We determine the beat length directly from oscillations in the OLCR amplitude with a resolution of 10(-6) and a spatial resolution only limited by the minimum beat length or the coherence length of the light source. Using the OLCR amplitude and phase in combination with an inverse scattering algorithm the birefringence is retrieved with a resolution of 2x10(-5) while the spatial resolution is 25 mum. The two developed techniques are applied for measuring position, magnitude and footprint of induced birefringence of an FBG under uniform and non-uniform diametric loading.

Polarization microscopy by use of digital holography: application to optical-fiber birefringence measurements.

We present a digital holographic microscope that permits one to image polarization state. This technique results from the coupling of digital holographic microscopy and polarization digital holography. The interference between two orthogonally polarized reference waves and the wave transmitted by a microscopic sample, magnified by a microscope objective, is recorded on a CCD camera. The off-axis geometry permits one to reconstruct separately from this single hologram two wavefronts that are used to image the object-wave Jones vector. We applied this technique to image the birefringence of a bent fiber. To evaluate the precision of the phase-difference measurement, the birefringence induced by internal stress in an optical fiber is measured and compared to the birefringence profile captured by a standard method, which had been developed to obtain high-resolution birefringence profiles of optical fibers.

Ultrahigh resolution optical coherence tomography using a superluminescent light source.

A superluminescent Ti:Al2O(3) crystal is demonstrated as a light source for ultrahigh resolution optical coherence tomography (OCT). Single spatial mode, fiber coupled output powers of ~40 microW can be generated with 138 nm bandwidth using a 5 W frequency doubled, diode pumped laser, pumping a thin Ti:Al2O(3) crystal. Ultrahigh resolution OCT imaging is demonstrated with 2.2 microm axial resolution in air, or 1.7 microm in tissue, with >86 dB sensitivity. This light source provides a simple and robust alternative to femtosecond lasers for ultrahigh resolution OCT imaging.

Video-rate three-dimensional optical coherence tomography.

Most current optical coherence tomography systems provide two-dimensional cross-sectional or en face images. Successive adjacent images have to be acquired to reconstruct three-dimensional objects, which can be time consuming. Here we demonstrate three-dimensional optical coherence tomography (3D OCT) at video rate. A 58 by 58 smart-pixel detector array was employed. A sample volume of 210x210x80 m3 (corresponding to 58x58x58 voxels) was imaged at 25 Hz. The longitudinal and transverse resolutions are 3 m and 9 m respectively. The sensitivity of the system was 76 dB. Video rate 3D OCT is illustrated by movies of a strand of hair undergoing fast thermal damage.