RESUMEN
Metamaterials and plasmonic structures made from aluminum (Al) have attracted significant interest due to their low cost, long-term stability, and the relative abundance of aluminum compared to the rare metals. Also, aluminum displays distinct dielectric properties allowing for the excitation of surface plasmons in the ultraviolet region with minimal non-radiative losses. Despite these clear advantages, most of the research has been focused on either gold or silver, probably due to difficulties in forming smooth thin films of aluminum. In the present work, we detect and characterize second harmonic generation (SHG) in the optical regime, emanating from triangular hole arrays milled into thin aluminum films in reflection mode, at normal incidence. We report intense nonlinear responses, year-long stability, and overall superior performances with respect to gold. The robustness of the Al structures and high reproducibility of the measured SHG responses allowed us to investigate changes in the directional emission upon tiny modifications in the structure's symmetry. We also demonstrate large-field instantaneous SHG imaging over areas containing several hole arrays using a recent, non-linear single-spinning disk microscope. Such high spatio-temporal resolution imaging has important applications, e.g., when studying chemical transformations occurring at electrode surfaces during charging and discharging cycles, as well as ageing.
RESUMEN
We demonstrate strong coupling between a single or few J-aggregates and an inverse bowtie plasmonic structure, when the J-aggregate is located at a specific axial distance from the metallic surface. Three hybrid modes are clearly observed, witnessing a strong interaction, with a Rabi splitting of up to 290 meV, the precise value of which significantly depends on the orientation of the J-aggregate with respect to the symmetry axis of the plasmonic structure. We repeated our experiments with a set of triangular hole arrays, showing consistent formation of three or more hybrid modes, in good agreement with numerical simulations.
RESUMEN
Nanoplasmonic biosensors incorporating noble metal nanocavity arrays are widely used for the detection of various biomarkers. Gold nanorods (GNRs) have unique properties that can enhance spectroscopic detection capabilities of such nanocavity-based biosensors. However, the contribution of the physical properties of multiple GNRs to resonance enhancement of gold nanocavity arrays requires further characterization and elucidation. In this work, we study how GNR aspect ratio (AR) and surface area (SA) modify the plasmonic resonance spectrum of a gold triangular nanocavity array by both simulations and experiments. The finite integration technique (FIT) simulated the extinction spectrum of the gold nanocavity array with 300 nm periodicity onto which the GNRs of different ARs and SAs are placed. Simulations showed that matching of the GNRs longitudinal peak, which is affected by AR, to the nanocavity array's spectrum minima can optimize signal suppression and shifting. Moreover, increasing SA of the matched GNRs increased the spectral variations of the array. Experiments confirmed that GNRs conjugated to a gold triangular nanocavity array of 300 nm periodicity caused spectrum suppression and redshift. Our findings demonstrate that tailoring of the GNR AR and SA parameters to nanoplasmonic arrays has the potential to greatly improve spectral variations for enhanced plasmonic biosensing.
RESUMEN
We investigate second harmonic generation (SHG) from hexagonal periodic arrays of triangular nano-holes of aluminum using a self-consistent methodology based on the hydrodynamics-Maxwell-Bloch approach. It is shown that angular polarization patterns of the far-field second harmonic response abide to threefold symmetry constraints on tensors. When a molecular layer is added to the system and its parameters are adjusted to achieve the strong coupling regime between a localized plasmon mode and molecular excitons, Rabi splitting is observed from the occurrence of both single- and two-photon transition peaks within the SHG power spectrum. It is argued that the splitting observed for both transitions results from direct two-photon transitions between lower and upper polaritonic states of the strongly coupled system. This interpretation can be accounted by a tailored three-level quantum model, with results in agreement with the unbiased numerical approach. Our results suggest that the hybrid states formed in strongly coupled systems directly contribute to the nonlinear dynamics. This opens new directions in designing THz sources and nonlinear frequency converters.
RESUMEN
Fluorescence standards allow for quality control and for the comparison of data sets across instruments and laboratories in applications of quantitative fluorescence. For example, users of microscopy core facilities can expect a homogenous and time-invariant illumination and an uniform detection sensitivity, which are prerequisites for imaging analysis, tracking or fluorimetric pH or Ca2+ -concentration measurements. Similarly, confirming the three-dimensional (3-D) resolution of optical sectioning microscopes calls for a regular calibration with a standardized point source. The test samples required for such measurements are typically different ones, they are often expensive and they depend much on the very microscope technique used. Similarly, the ever-increasing choice among microscope techniques and geometries increases the demand for comparison across instruments. Here, we advocate and demonstrate the multiple uses of a surprisingly versatile and simple 3-D test sample that can complement existing and much more expensive calibration samples: commercial tissue paper labeled with a fluorescent highlighter pen. We provide relevant sample characteristics and show examples ranging from the sub-µm to cm scale, acquired on epifluorescence, confocal, image scanning, two-photon (2P) and light-sheet microscopes.
Asunto(s)
Procesamiento de Imagen Asistido por Computador , Microscopía , Calibración , Técnicas HistológicasRESUMEN
Nanoporous metallic networks are endowed with the distinctive optical properties of strong field enhancement and spatial localization, raising the necessity to map the optical eigenmodes with high spatial resolution. In this work, we used cathodoluminescence (CL) to map the local electric fields of a three-dimensional (3D) silver network made of nanosized ligaments and holes over a broad spectral range. A multitude of neighboring hotspots at different frequencies and intensities are observed at subwavelength distances over the network. In contrast to well-defined plasmonic structures, the hotspots do not necessarily correlate with the network morphology, emphasizing the complexity and energy dissipation through the network. In addition, we show that the inherent connectivity of the networked structure plays a key optical role because a ligament with a single connected linker shows localized modes whereas an octopus-like ligament with multiple connections permits energy propagation through the network.
RESUMEN
While classical liquid droplets are rounded, transitions have recently been discovered which render polyhedral water-suspended droplets of several oils. Yet, the mechanism of these transitions and the role of the droplets' interfacial curvature in inducing these transitions remain controversial. In particular, one of the two mechanisms suggested mandates a convex interface, in a view from the oil side. Here we show that oil-suspended water droplets can spontaneously assume polyhedral shapes, in spite of their concave interface. These results strongly support the alternative mechanism, where the faceting in both oil and water droplets is driven by the elasticity of a crystalline monolayer, known to self-assemble at the oil-water interface, independent of its curvature. The faceting transitions in the water droplets allow the fundamental elastic properties of two-dimensional matter to be probed, enable new strategies in faceted nanoparticle and nanoshell synthesis, and provide insight into the molecular mechanisms of morphogenesis.
RESUMEN
Fluorescence detection, either involving propagating or near-field emission, is widely being used in spectroscopy, sensing, and microscopy. Total internal reflection fluorescence (TIRF) confines fluorescence excitation by an evanescent (near) field, and it is a popular contrast generator for surface-selective fluorescence assays. Its emission equivalent, supercritical angle fluorescence (SAF), is comparably less established, although it achieves a similar optical sectioning as TIRF does. SAF emerges when a fluorescing molecule is located very close to an interface and its near-field emission couples to the higher refractive index medium (n2 >n1) and becomes propagative. Then, most fluorescence is detectable on the side of the higher-index substrate, and a large fraction of this fluorescence is emitted into angles forbidden by Snell's law. SAF, as well as the undercritical angle fluorescence (UAF; far-field emission) components, can be collected with microscope objectives having a high-enough detection aperture (numerical aperture >n2) and be separated in the back focal plane by Fourier filtering. The back focal plane image encodes information about the fluorophore radiation pattern, and it can be analyzed to yield precise information about the refractive index in which the emitters are embedded, their nanometric distance from the interface, and their orientation. A SAF microscope can retrieve this near-field information through wide-field optics in a spatially resolved manner, and this functionality can be added to an existing inverted microscope. Here, we describe the potential underpinning of SAF microscopy and spectroscopy, particularly in comparison with TIRF. We review the challenges and opportunities that SAF presents from a biophysical perspective, and we discuss areas in which we see potential.
Asunto(s)
Colorantes Fluorescentes , Refractometría , Microscopía Fluorescente , Análisis EspectralRESUMEN
We report a new approach for large-scale alignment of micron-sized J-aggregates of a derivative of porphyrin onto planar glass substrates. We applied a unidirectional nitrogen flow to an aqueous dye drop deposited onto a glass substrate to form an about 5 nm thick film of aligned J-aggregates over macroscopic surface areas up to several millimeters. The inter-aggregate distance is â¼500 nm, and it scales with the nitrogen pressure. We verified the film thickness and J-aggregate alignment using multimodal microscopy and spectroscopy techniques. Our technique is fast, simple, and cost-effective for producing large two-dimensional (2-D) arrays of aligned emitters.
RESUMEN
Roughly half of a cell's proteins are located at or near the plasma membrane. In this restricted space, the cell senses its environment, signals to its neighbors, and exchanges cargo through exo- and endocytotic mechanisms. Ligands bind to receptors, ions flow across channel pores, and transmitters and metabolites are transported against concentration gradients. Receptors, ion channels, pumps, and transporters are the molecular substrates of these biological processes, and they constitute important targets for drug discovery. Total internal reflection fluorescence (TIRF) microscopy suppresses the background from the cell's deeper layers and provides contrast for selectively imaging dynamic processes near the basal membrane of live cells. The optical sectioning of TIRF is based on the excitation confinement of the evanescent wave generated at the glass/cell interface. How deep the excitation light actually penetrates the sample is difficult to know, making the quantitative interpretation of TIRF data problematic. Nevertheless, many applications like superresolution microscopy, colocalization, Förster resonance energy transfer, near-membrane fluorescence recovery after photobleaching, uncaging or photoactivation/switching as well as single-particle tracking require the quantitative interpretation of evanescent-wave-excited images. Here, we review existing techniques for characterizing evanescent fields, and we provide a roadmap for comparing TIRF data across images, experiments, and laboratories.
Asunto(s)
Microscopía Fluorescente/métodos , Calibración , Colorantes Fluorescentes/química , Refractometría , Espectrometría de FluorescenciaRESUMEN
Second harmonic generation (SHG) is forbidden from most bulk metals because metals are characterized by centrosymmetric symmetry. Adsorption or desorption of molecules at the metal interface can break the symmetry and lead to SHG responses. Yet, the response is relatively low, and minute changes occurring at the interface, especially at solid/liquid interfaces, like in battery electrodes are difficult to assess. Herein, we use a plasmonic structure milled in a gold electrode to increase the overall SHG signal from the interface and gain information about small changes occurring at the interface. Using a specific homebuilt cell, we monitor changes at the liquid/electrode interface. Specifically, traces of water in dimethoxyethane (DME) have been detected following changes in the SHG responses from the plasmonic structures. We propose that by plasmonic structures this technique can be used for assessing minute changes occurring at solid/liquid interfaces such as battery electrodes.
RESUMEN
Nanoporous metallic networks are a group of porous materials made of solid metals with suboptical wavelength sizes of both particles and voids. They are characterized by unique optical properties, as well as high surface area and permeability of guest materials. As such, they attract a great focus as novel materials for photonics, catalysis, sensing, and renewable energy. Their properties together with the ability for scaling-up evoke an increased interest also in the industrial field. Here, fabrication techniques of large-scale metallic networks are discussed, and their interesting optical properties as well as their applications are considered. In particular, the focus is on disordered systems, which may facilitate the fabrication technique, yet, endow the three-dimensional (3D) network with distinct optical properties. These metallic networks bridge the nanoworld into the macroscopic world, and therefore pave the way to the fabrication of innovative materials with unique optoelectronic properties.
RESUMEN
Dipole radiation patterns change when a fluorescent molecule comes close to the boundary between media of different refractive indices. Near-interface molecules emit mostly into the higher-index medium, predominantly around the critical angle. The radiation pattern encodes information about the emitter distance, orientation, and the refractive index of the embedding medium. Analyses of the supercritical angle fluorescence on pupil plane images can retrieve this information and have been applied both for refractometry with subcellular resolution and for the detection of metabolically active cancerous cells. In this issue of ACS Nano, Ferdman et al. employ this strategy in a label-free assay for detecting single bacteria, based on measuring the refractive-index change produced by bacterial growth in a fluorophore-coated microfluidic channel.
RESUMEN
Second harmonic generation (SHG) is forbidden for materials with inversion symmetry, such as bulk metals. Symmetry can be broken by morphological or dielectric discontinuities, yet SHG from a smooth continuous metallic surface is negligible. Using non-linear microscopy, we experimentally demonstrate enhanced SHG within an area of smooth silver film surrounded by nanocavities. Nanocavity-assisted SHG is locally enhanced by more than one order of magnitude compared to a neighboring silver surface area. Linear optical measurements and cathodoluminescence (CL) imaging substantiate these observations. We suggest that plasmonic modes launched from the edges of the nanocavities propagate onto the smooth silver film and annihilate, locally generating SHG. In addition, we show that these hotspots can be dynamically controlled in intensity and location by altering the polarization of the incoming field. Our results show that switchable nonlinear hotspots can be generated on smooth metallic films, with important applications in photocatalysis, single-molecule spectroscopy and non-linear surface imaging.
RESUMEN
We report the synthesis, characterization, and photo-physical properties of two new rutheniumII -phenol-imidazole complexes. These bio-mimetic complexes have potential as photocatalysts for water splitting. Owing to their multiple phenol-imidazole groups, they have a higher probability of light-induced radical formation than existing complexes. The newly synthesized complexes show improved overlap with the solar spectrum compared to other rutheniumII -phenol-imidazole complexes, and their measured lifetimes are suitable for light-induced radical formation. In addition, we conducted solvatochromic absorption measurements, which elegantly follow Marcus theory, and demonstrate the symmetry differences between the two complexes. The solvatochromic measurements further imply electron localization onto one of the ligands. The new complexes may find applications in photocatalysis, dye-sensitized solar cells, biomedicine, and sensing. Moreover, their multiple chelating units make them promising candidates for light-activated metal organic radical frameworks, i.e. metal-organic frameworks that contain organic radicals activated by light.
RESUMEN
Plasmonic nanostructures and carbon dots (C-dots) are fascinating optical materials, utilized in imaging, sensing, and color generation. Interaction between plasmonic materials and C-dots may lead to new hybrid materials with controllable optical properties. Herein, we demonstrate for the first time coupling between plasmonic modes and C-dots deposited upon a plasmonic silver hole array. The coupling leads to a remarkable visual attenuation and shifts of the plasmonic wavelengths (i.e., color tuning). In particular, the C-dots-plasmon couplings and pertinent color transformations depend both upon the C-dots' fluorescence emission wavelengths and functional residues displayed upon the C-dots' surface. This optical modulation corresponds to energy level alignment and consequent energy transfer between the C-dots and the plasmonic silver hole array. Notably, the energy coupling observed in the C-dot-plasmonic hybrid system allows distinguishing between C-dots species exhibiting similar optical properties, albeit displaying different functional residues.
RESUMEN
Scanning electron microscopy (SEM) is one of the most powerful tools for nanoscale inspection and imaging. It is broadly used for biomedicine, materials science, and nanotechnology, enabling spatial resolution beyond the optical diffraction limit. In SEM, a high-energy electron beam illuminates a specimen, and the emitted secondary electrons are routed to a positively biased, synchronized detector for image creation. Here, for the first time, we experimentally demonstrate a cloaking of metallic objects from a secondary electron image. We make a metallic disc with a diameter of 300 nm almost invisible to a secondary electron detector with <5 nm spatial resolution. The secondary electron cloaking is based on broadband optical radiation absorption in the near field. Our secondary electron images are in good agreement with full-wave numerical solution of Maxwell's equations at optical frequencies, confirming the concept of secondary electron cloaking based on broadband optical radiation absorption.
RESUMEN
Fabrication of macroscopic nanoporous metallic networks is challenging, because it demands fine structures at the nanoscale over a large-scale. A technique to form pure scalable networks is introduced. The networked-metals ("Netals") exhibit a strong interaction with light and indicate a large fraction of hot-electrons generation. These hot-electrons are available to derive photocatalytic processes.
RESUMEN
Metallic hole arrays have been recently used for color generation and filtering due to their reliability and color tunability. However, color generation is still limited to several microns. Understanding the interaction between the individual elements of the whole nanostructure may push the resolution to the sub-micron level. Herein, we study the hybridization between silver nanocavities in order to obtain active color generation at the micron scale. To do so, we use five identical triangular cavities which are separated by hundreds of nanometers from each other. By tuning either the distance between the cavities or the optical polarization state of the incoming field, the transmitted light through the cavities is actively enhanced at specific frequencies. Consequently, a rainbow of colors is observed from a sub-micron scale unit. The reason for this is that the metallic surface plays a vital role in the hybridization between the cavities and contributes to higher frequency modes. Cathodoluminescence measurements have confirmed this assumption and have revealed that these five triangular cavities act as a unified entity surrounded by the propagated surface plasmons. In such plasmonic structures, multi-color tuning can be accomplished and may open the possibility to improve color generation and high-quality pixel fabrication.