In Vitro Digestion and Fermentation of Cowpea Pod Extracts and Proteins Loaded in Ca(II)-Alginate Hydrogels.

Antioxidants derived from food by-products are known for their bioactive properties and impact on human health. However, the gastrointestinal behavior is often poor due to their degradation during digestion. The development of Ca(II)-alginate beads supplemented with biopolymers and enriched with cowpea (Vigna unguiculata) extract could represent a novel environmentally friendly technological solution to produce functional ingredients in the food industry. The present study evaluates the impact of in vitro digestion/fermentation by analyzing global antioxidant response (GAR), production of short-chain fatty acids (SCFAs) as a modulation of gut microbiota, and behavior of proton transverse relaxation times by low-field nuclear magnetic resonance (as an indicator of gelation state and characterization of microstructure). Results revealed that guar gum and cowpea protein preserved a high GAR of total phenolic compounds and antioxidant capacity by ABTS and FRAP methods after digestion/fermentation, promoting an adequate protection of the bioactives for their absorption. Alginate-based beads have great potential as prebiotics, with the guar gum-containing system contributing the most to SCFAs production. Finally, the overall higher mobility of protons observed in the intestinal phase agrees with structural changes that promote the release of phenolic compounds during this stage. Beads are excellent carriers of bioactive compounds (cowpea phenolic compounds and peptides) with potential capacities.

Design of an antioxidant powder additive based on carvacrol encapsulated into a multilayer chitosan-alginate-maltodextrin emulsion.

Carvacrol has demonstrated antioxidant activity; however, its high volatility and low water solubility limit its direct application in food matrices. Then, an effective encapsulation system is required to protect it. This study aimed to design and characterize a carvacrol-based additive encapsulated in a spray-dried multilayer emulsion based on chitosan/sodium alginate/maltodextrin. Spray-drying temperature of 120 °C and 3 %(w/w) maltodextrin content maximized both encapsulation efficiency (~97 %) and loading capacity (~53 %). The powder's antioxidant properties were evaluated in two food simulant media: water (SiW) and water-ethanol (SiD). The highest antioxidant activity was observed in SiW for both ABTS•+ (8.2 ± 0.3mgEAG/g) and FRAP (4.1 ± 0.2mgEAG/g) methods because of the reduced release of carvacrol in SiD vs. SiW, as supported by micro- and macrostructural observations by SAXS and microscopy, respectively. An increase from 143 to 157 °C attributable to carvacrol protection and Tg = 44.4 °C (> ambient) were obtained by TGA and DSC, respectively. FT-IR confirmed intermolecular interactions (e.g. -COO- and -NH3+) as well as H-bonding formation. High water solubility (81 ± 3 %), low hygroscopicity (8.8 ± 0.2 %(w/w), poor flowability (CI:45 ± 4), and high cohesiveness (HR:1.8 ± 0.1) between particles were achieved, leading to a powdered antioxidant additive with high potential for applications which required avoiding/reducing oxidation on hydrophilic and hydrophobic food products.

Extraction of bioactive compounds from pecan nutshell: An added-value and low-cost alternative for an industrial waste.

The pecan nutshell [Carya illinoinensis (Wangenh) C. Koch] (PNS) is a source of bioactives with important beneficial properties for the human health. PNS represents between 40-50 % of total mass of the nut, resulting as waste without any added value for the food industry. Even though a variety of methods were already developed for bioactive extraction from this waste, unconventional methodologies, or those which apart from green chemistry principles, were discarded considering the cost of production, the sustainable development goals of United Nations and the feasibility of real inclusion of the technology in the food chain. Then, to add-value to this waste, a low-cost, green and easy-scalable extraction methodology was developed based on the determination of seven relevant factors by means of a factorial design and a Response Surface Methodology, allowing the extraction of bioactives with antioxidant capacity. The pecan nutshell extract had a high concentration of phenolic compounds (166 mg gallic acid equivalents-GAE/g dry weight-dw), flavonoids (90 mg catechin equivalent-CE/g dw) and condensed tannins (189 mg CE/g dw) -related also to the polymeric color (74.6 %)-, with high antioxidant capacities of ABTS+. radical inhibition (3665 µmol Trolox Equivalent-TE/g dw) and of iron reduction (1305 µmol TE/g dw). Several compounds associated with these determinations were identified by HPLC-ESI-MS/MS, such as [Epi]catechin-[Epi]catechin-[Epi]gallocatechin, myricetin, dihydroquercetins, dimers A and B of protoanthocyanidins, ellagitannins and ellagic acid derivatives. Hence, through the methodology developed here, we obtained a phenolic rich extract with possible benefits for human health, and of high industrial scalability for this co-product transformation.

One-pot synthesis of alginate-antimicrobial peptide nanogel.

Nanosized alginate-based particles (NAPs) were obtained in a one-pot solvent-free synthesis procedure, achieving the design of a biocompatible nanocarrier for the encapsulation of IbM6 antimicrobial peptide (IbM6). IbM6 is integrated in the nascent nanosized hydrogel self-assembly guided by electrostatic interactions and by weak interactions, typical of soft matter. The formation of the nanogel is a dynamic and complex process, which presents an interesting temporal evolution. In this work, we optimized the synthesis conditions of IbM6-NAPs based on small-angle X-ray scattering (SAXS) measurements and evaluated its time evolution over several weeks by sensing the IbM6 environment in IbM6-NAPs from photochemical experiments. Fluorescence deactivation experiments revealed that the accessibility of different quenchers to the IbM6 peptide embedded in NAPs is dependent on the aging time of the alginate network. Lifetimes measurements indicate that the deactivation paths of the excited state of the IbM6 in the nanoaggregates are reduced when compared with those exhibited by the peptide in aqueous solution, and are also dependent on the aging time of the nanosized alginate network. Finally, the entrapment of IbM6 in NAPs hinders the degradation of the peptide by trypsin, increasing its antimicrobial activity against Escherichia coli K-12 in simulated operation conditions.

Isolation and Characterization of an Antioxidant Aryl Polyene Pigment from Antarctic Bacterium Lysobacter sp. A03.

Lysobacter is known as a bacterial genus with biotechnological potential, producing an array of enzymes, antimicrobial metabolites, and bioactive antioxidant compounds, including aryl polyene (APE) pigments that have been described as protecting substances against photooxidative damage and lipid peroxidation. In this study, the pigment extracted from keratinolytic Lysobacter sp. A03 isolated from Antarctic environment was characterized. The results of KOH test, UV-vis spectroscopy, CIELAB color system, 1H-NMR, and FTIR-ATR spectroscopy suggest the pigment is a yellow xanthomonadin-like pigment. The in vitro antioxidant activity of the pigment was confirmed by the scavenging of ABTS and DPPH radicals. In silico analysis of the genome through antiSMASH software was also performed and the secondary metabolite gene clusters for APE and resorcinol synthesis were identified, suggesting that proteins responsible for the pigment biosynthesis are encoded in Lysobacter A03 genome.

Probiotic Encapsulation: Bead Design Improves Bacterial Performance during In Vitro Digestion.

The stability and release properties of all bioactive capsules are strongly related to the composition of the wall material. This study aimed to evaluate the effect of the wall materials during the encapsulation process by ionotropic gelation on the viability of Lactobacillus fermentum K73, a lactic acid bacterium that has hypocholesterolemia probiotic potential. A response surface methodology experimental design was performed to improve bacterial survival during the synthesis process and under simulated gastrointestinal conditions by tuning the wall material composition (gelatin 25% w/v, sweet whey 8% v/v, and sodium alginate 1.5% w/v). An optimal mixture formulation determined that the optimal mixture must contain a volume ratio of 0.39/0.61 v/v sweet whey and sodium alginate, respectively, without gelatin, with a final bacterial concentration of 9.20 log10 CFU/mL. The mean particle diameter was 1.6 ± 0.2 mm, and the experimental encapsulation yield was 95 ± 3%. The INFOGEST model was used to evaluate the survival of probiotic beads in gastrointestinal tract conditions. Upon exposure to in the vitro conditions of oral, gastric, and intestinal phases, the encapsulated cells of L. fermentum decreased only by 0.32, 0.48, and 1.53 log10 CFU/mL, respectively, by employing the optimized formulation, thereby improving the survival of probiotic bacteria during both the encapsulation process and under gastrointestinal conditions compared to free cells. Beads were characterized using SEM and ATR-FTIR techniques.

Effect of wall material on lipophilic functional compounds of high oleic palm oil emulsions encapsulated by Refractance Window drying.

High-oleic palm oil is a food-grade oil with desirable properties, as it is characterised by having an oleic acid concentration above 50 % and a high vitamin E and provitamin A content. This study investigated the effect of different combinations of two wall materials (whey protein (WP) and Capsul®, a commercial octenyl succinic anhydride modified starch (OSA-MS)) on the concentration of provitamin A, vitamin E and oleic acid, and the physical properties of high oleic palm oil emulsions encapsulated by Refractance Window drying technology. Wall material composition significantly affected (p < 0.05) all response variables, and R2 values were above 0.75 for all responses. Phytonutrient preservation showed its highest at an OSA-MS: WP concentration ratio of 1: 3. Optimal results were achieved (minimum moisture content, water activity and hygroscopicity, and maximum encapsulation efficiency and phytonutrient preservation) at an OSA-MS concentration of 8.13 % and WP concentration of 91.87 %. Flakes were obtained as a solid structure that protects oil's phytonutrients with 94 %, 75 % and 87 % of preservation of oleic acid, vitamin E and carotenoids, respectively. It shows that the wall material combination and encapsulation technique are suitable for obtaining lipophilic functional compounds.

Bioaccessibility assay, antioxidant activity and consumer-oriented sensory analysis of Beta vulgaris by-product encapsulated in Ca(II)-alginate beads for different foods.

Bioaccessibility analysis and antioxidant activity along in vitro digestion and a consumer-oriented sensory analysis were conducted in three potential functional foods based on Ca(II)-alginate beads containing bioactive compounds extracted from beet stems. Ca(II)-alginate beads per se, and two selected products (cookies and turkish delights supplemented with the beads) were prepared. Regarding the beads, among the attributes rated by consumers, visual appreciation predominates, being color in the just-as-right (JAR) category and in the like preference. Instead, both flavor and sweet taste were attributes highly penalized and should be improved in beads to be accepted as food per se. A higher percentage of customers preferred cookies and turkish delights instead of only beads, considering global satisfaction. Regarding in vitro digestion, there was a significant content of phenolic compounds in the products with beads, showing a bioaccessibility greater than 80% (for cookies) and 26% (for turkish delights). Also, the antioxidant capacity measured by ABTS ranged between 50 and 109% for cookies and turkish delights, being lower when measured by FRAP (between 20 and 30%, respectively). Thus, including the beads with beet stem extract in both products leads to a significant increase in the content of phenolic compounds and in the antioxidant capacity compared to their counterparts, protecting the compound during oral and gastric phases. These results allow the generation of improved Ca(II)-alginate systems with promising functional properties for the development of ingredients and functional foods.

Development of a biocomposite based on alginate/gelatin crosslinked with genipin for ß-galactosidase immobilization: Performance and characteristics.

In this work, we studied the development of a biocomposite formulated with alginate and gelatin, crosslinked with genipin for application as support for ß-galactosidase immobilization. Also, the biocomposites with the immobilized enzyme were characterized by thermal analyses and SAXS (size, density, and interconnectivity of alginate rods) for a detailed analysis of the microstructure, as well as the thermal and operational stabilities of the enzyme. The structural modifications of the biocomposite determined by SAXS demonstrate that the addition of both genipin and enzyme produced a significant reduction in size and density of the Ca(II)-alginate rods. Immobilized ß-galactosidase could be stored for 175 days under refrigeration maintaining 80% of its initial activity. Moreover, 90% of its relative activity was kept after 11 reuses in a batch process of lactose hydrolysis. Thus, the biocomposite proved to be effective as support for enzyme immobilization.

Evaluation of calcium alginate bead formation kinetics: An integrated analysis through light microscopy, rheology and microstructural SAXS.

Ca(II)-alginate beads are being produced for a broad spectrum of biotechnological uses. Despite the simplicity of their manufacturing process, in these highly complex arrangements, the final properties of the material strongly depend on the supramolecular scaffolding. Here we present a cost-effective automatized Optical Video Microscopy approach for in situ evaluation of the kinetics of alginate bead formation. With simple mathematic modeling of the acquired data, we obtained key parameters that reveal valuable information on the system: the time course of gel-front migration correlates with the plateau of the storage module, and total volume shrinkage is highly related to the stabilization of shear strain and shear stress at the yield point. Our results provide feasible and reproducible tools, which allow for a better interpretation of bead formation kinetics and a rapid screening technique to use while designing gelling materials with specific properties for technological applications.