Iceberg lettuce cultivated in different systems of planting and sources of fertilizer

Abstract Organic fertilization is a cheaper and highly effective option for profitability and consequent improvement of the soil's physical, chemical, and biological structure. Thus, the objective of this work was to evaluate different types of fertilization: organic (poultry shed litter), mineral, and leaf path on yield parameters of lettuce grown in various types of planting. The treatments consisted of using two planting systems (P1 - Line and P2 - quincunxes) and mineral and organic fertilizers (A1 - mineral fertilization; A2 - mineral fertilization + leaf fertilization; A3 - organic fertilization with poultry shed litter and A4 - fertilization organic + mineral). The experimental units consisted of 36 and 52 plants, respectively, for treatments P1 and P2, and all central plants of the experimental unit were evaluated. Heart height, fresh mass, and leaf number were observed. The mineral and mineral + leaf treatments did not differentiate, either in line or in quincunxes. The treatment that stood out about the analyzed variables was the organic fertilization and quincunxes planting system, reflecting a more significant number of lettuce plants and better use of the area.

Resumo A adubação orgânica é uma opção mais barata e de grande eficácia em relação à rentabilidade e consequente melhoria da estrutura física, química e biológica do solo. Desta forma, o objetivo deste trabalho foi avaliar diferentes tipos de adubação: orgânica (cama de frango), mineral e via foliar sobre parâmetros de produtividade de alface cultivada em diferentes tipos de plantio. Os tratamentos consistiram na utilização de dois sistemas de plantio (P1 - Linha e P2 - Quincôncio) e adubações minerais e orgânicas (A1 - adubação mineral; A2 - adubação mineral + adubação foliar; A3 - adubação orgânica com cama de aviário e A4 - adubação orgânica + mineral). As unidades experimentais foram compostas por 36 e 52 plantas, respectivamente, para os tratamentos em linha e em quincôncio, sendo avaliadas todas as plantas centrais da unidade experimental. Foram observados a altura do coração, massa fresca e número de folhas. Os tratamentos mineral e mineral + foliar não diferenciaram entre si, tanto em linha quanto em quincôncio. O tratamento que se destacou em relação às variáveis analisadas foi aquele baseado na adubação orgânica e sistema de plantio em quincôncio, refletindo em maior número de pés de alface e melhor aproveitamento da área.

Iceberg lettuce cultivated in different systems of planting and sources of fertilizer / Alface americana cultivada em diferentes sistemas de plantio e fontes de fertilizantes

Organic fertilization is a cheaper and highly effective option for profitability and consequent improvement of the soil's physical, chemical, and biological structure. Thus, the objective of this work was to evaluate different types of fertilization: organic (poultry shed litter), mineral, and leaf path on yield parameters of lettuce grown in various types of planting. The treatments consisted of using two planting systems (P1 - Line and P2 - quincunxes) and mineral and organic fertilizers (A1 - mineral fertilization; A2 - mineral fertilization + leaf fertilization; A3 - organic fertilization with poultry shed litter and A4 - fertilization organic + mineral). The experimental units consisted of 36 and 52 plants, respectively, for treatments P1 and P2, and all central plants of the experimental unit were evaluated. Heart height, fresh mass, and leaf number were observed. The mineral and mineral + leaf treatments did not differentiate, either in line or in quincunxes. The treatment that stood out about the analyzed variables was the organic fertilization and quincunxes planting system, reflecting a more significant number of lettuce plants and better use of the area.

A adubação orgânica é uma opção mais barata e de grande eficácia em relação à rentabilidade e consequente melhoria da estrutura física, química e biológica do solo. Desta forma, o objetivo deste trabalho foi avaliar diferentes tipos de adubação: orgânica (cama de frango), mineral e via foliar sobre parâmetros de produtividade de alface cultivada em diferentes tipos de plantio. Os tratamentos consistiram na utilização de dois sistemas de plantio (P1 - Linha e P2 - Quincôncio) e adubações minerais e orgânicas (A1 - adubação mineral; A2 - adubação mineral + adubação foliar; A3 - adubação orgânica com cama de aviário e A4 - adubação orgânica + mineral). As unidades experimentais foram compostas por 36 e 52 plantas, respectivamente, para os tratamentos em linha e em quincôncio, sendo avaliadas todas as plantas centrais da unidade experimental. Foram observados a altura do coração, massa fresca e número de folhas. Os tratamentos mineral e mineral + foliar não diferenciaram entre si, tanto em linha quanto em quincôncio. O tratamento que se destacou em relação às variáveis analisadas foi aquele baseado na adubação orgânica e sistema de plantio em quincôncio, refletindo em maior número de pés de alface e melhor aproveitamento da área.

Iceberg lettuce cultivated in different systems of planting and sources of fertilizer.

Organic fertilization is a cheaper and highly effective option for profitability and consequent improvement of the soil's physical, chemical, and biological structure. Thus, the objective of this work was to evaluate different types of fertilization: organic (poultry shed litter), mineral, and leaf path on yield parameters of lettuce grown in various types of planting. The treatments consisted of using two planting systems (P1 - Line and P2 - quincunxes) and mineral and organic fertilizers (A1 - mineral fertilization; A2 - mineral fertilization + leaf fertilization; A3 - organic fertilization with poultry shed litter and A4 - fertilization organic + mineral). The experimental units consisted of 36 and 52 plants, respectively, for treatments P1 and P2, and all central plants of the experimental unit were evaluated. Heart height, fresh mass, and leaf number were observed. The mineral and mineral + leaf treatments did not differentiate, either in line or in quincunxes. The treatment that stood out about the analyzed variables was the organic fertilization and quincunxes planting system, reflecting a more significant number of lettuce plants and better use of the area.

Reproducibility of carotid ultrasound measurements in the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil) at baseline.

Carotid artery assessment by ultrasound is a non-invasive evaluation of subclinical atherosclerosis and a predictor of cardiovascular events. However, ultrasound examinations are operator-dependent. In the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil), ultrasound images have been acquired from more than 10,000 participants. In this article, we describe the reproducibility of carotid intima-media thickness (CIMT), carotid plaque detection, and carotid plaque score (defined as the number of arterial sites with plaques) using ELSA-Brasil protocol, in a subset of 118 participants. Two board-certified radiologists and a trained technician read carotid images. We calculated intra- and inter-observer intraclass correlation (ICC) for CIMT values. We also present kappa coefficients for plaque detection and weighted kappa coefficients for carotid plaque score. Participants were aged 58.2±6.6 years, and 60 (50.8%) were men. For common carotid artery CIMT measurements, intra- and inter-observer ICC values were very good to excellent, ranging from 0.90 (95% confidence interval [95%CI]: 0.72-0.95) to 0.98 (95%CI: 0.97-0.99). For carotid plaque, intra- (0.96 [95%CI: 0.96-0.96]) and inter- (0.99 [95%CI: 0.99-0.99]) observer weighted kappa coefficients were very good. Intra- and inter-observer Kappa coefficients for the presence of plaques by site were good to very good, ranging from 0.69 to 1.00. In conclusion, we found very good reproducibility for carotid plaque score and CIMT measurements in the ELSA-Brasil at baseline. These results are comparable to the best findings from similar large cohorts that analyzed carotid ultrasound data.

Reproducibility of carotid ultrasound measurements in the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil) at baseline

Carotid artery assessment by ultrasound is a non-invasive evaluation of subclinical atherosclerosis and a predictor of cardiovascular events. However, ultrasound examinations are operator-dependent. In the Brazilian Longitudinal Study of Adult Health (ELSA-Brasil), ultrasound images have been acquired from more than 10,000 participants. In this article, we describe the reproducibility of carotid intima-media thickness (CIMT), carotid plaque detection, and carotid plaque score (defined as the number of arterial sites with plaques) using ELSA-Brasil protocol, in a subset of 118 participants. Two board-certified radiologists and a trained technician read carotid images. We calculated intra- and inter-observer intraclass correlation (ICC) for CIMT values. We also present kappa coefficients for plaque detection and weighted kappa coefficients for carotid plaque score. Participants were aged 58.2±6.6 years, and 60 (50.8%) were men. For common carotid artery CIMT measurements, intra- and inter-observer ICC values were very good to excellent, ranging from 0.90 (95% confidence interval [95%CI]: 0.72-0.95) to 0.98 (95%CI: 0.97-0.99). For carotid plaque, intra- (0.96 [95%CI: 0.96-0.96]) and inter- (0.99 [95%CI: 0.99-0.99]) observer weighted kappa coefficients were very good. Intra- and inter-observer Kappa coefficients for the presence of plaques by site were good to very good, ranging from 0.69 to 1.00. In conclusion, we found very good reproducibility for carotid plaque score and CIMT measurements in the ELSA-Brasil at baseline. These results are comparable to the best findings from similar large cohorts that analyzed carotid ultrasound data.

Sting_RDB: a relational database of structural parameters for protein analysis with support for data warehousing and data mining.

An effective strategy for managing protein databases is to provide mechanisms to transform raw data into consistent, accurate and reliable information. Such mechanisms will greatly reduce operational inefficiencies and improve one's ability to better handle scientific objectives and interpret the research results. To achieve this challenging goal for the STING project, we introduce Sting_RDB, a relational database of structural parameters for protein analysis with support for data warehousing and data mining. In this article, we highlight the main features of Sting_RDB and show how a user can explore it for efficient and biologically relevant queries. Considering its importance for molecular biologists, effort has been made to advance Sting_RDB toward data quality assessment. To the best of our knowledge, Sting_RDB is one of the most comprehensive data repositories for protein analysis, now also capable of providing its users with a data quality indicator. This paper differs from our previous study in many aspects. First, we introduce Sting_RDB, a relational database with mechanisms for efficient and relevant queries using SQL. Sting_rdb evolved from the earlier, text (flat file)-based database, in which data consistency and integrity was not guaranteed. Second, we provide support for data warehousing and mining. Third, the data quality indicator was introduced. Finally and probably most importantly, complex queries that could not be posed on a text-based database, are now easily implemented. Further details are accessible at the Sting_RDB demo web page: http://www.cbi.cnptia.embrapa.br/StingRDB.

Sting_RDB: a relational database of structural parameters for protein analysis with support for data warehousing and data mining

An effective strategy for managing protein databases is to provide mechanisms to transform raw data into consistent, accurate and reliable information. Such mechanisms will greatly reduce operational inefficiencies and improve one’s ability to better handle scientific objectives and interpret the research results. To achieve this challenging goal for the STING project, we introduce Sting_RDB, a relational database of structural parameters for protein analysis with support for data warehousing and data mining. In this article, we highlight the main features of Sting_RDB and show how a user can explore it for efficient and biologically relevant queries. Considering its importance for molecular biologists, effort has been made to advance Sting_RDB toward data quality assessment. To the best of our knowledge, Sting_RDB is one of the most comprehensive data repositories for protein analysis, now also capable of providing its users with a data quality indicator. This paper differs from our previous study in many aspects. First, we introduce Sting_RDB, a relational database with mechanisms for efficient and relevant queries using SQL. Sting_rdb evolved from the earlier, text (flat file)-based database, in which data consistency and integrity was not guaranteed. Second, we provide support for data warehousing and mining. Third, the data quality indicator was introduced. Finally and probably most importantly, complex queries that could not be posed on a text-based database, are now easily implemented. Further details are accessible at the Sting_RDB demo web page: http://www.cbi.cnptia.embrapa.br/StingRDB.

The Star STING server: a multiplatform environment for protein structure analysis.

Star STING is the latest version of the STING suite of programs and corresponding database. We report on five important aspects of this package that have acquired some new characteristics, designed to add key advantages to the whole suite: 1) availability for most popular platforms and browsers, 2) introduction of the STING_DB quality assessment, 3) improvement in algorithms for calculation of three STING parameters, 4) introduction of five new STING modules, and 5) expansion of the existing modules. Star STING is freely accessible at: http://sms.cbi.cnptia.embrapa.br/SMS/, http://trantor.bioc.columbia.edu/SMS, http://www.es.embnet.org/SMS/, http://gibk26.bse.kyutech.ac.jp/SMS/ and http://www.ar.embnet.org/SMS.

Predicting enzyme class from protein structure using Bayesian classification

Predicting enzyme class from protein structure parameters is a challenging problem in protein analysis. We developed a method to predict enzyme class that combines the strengths of statistical and data-mining methods. This method has a strong mathematical foundation and is simple to implement, achieving an accuracy of 45%. A comparison with the methods found in the literature designed to predict enzyme class showed that our method outperforms the existing methods.

Building multiple sequence alignments with a flavor of HSSP alignments

Homology-derived secondary structure of proteins (HSSP) is a well-known database of multiple sequence alignments (MSAs) which merges information of protein sequences and their three-dimensional structures. It is available for all proteins whose structure is deposited in the PDB. It is also used by STING and (Java)Protein Dossier to calculate and present relative entropy as a measure of the degree of conservation for each residue of proteins whose structure has been solved and deposited in the PDB. However, if the STING and (Java)Protein Dossier are to provide support for analysis of protein structures modeled in computers or being experimentally solved but not yet deposited in the PDB, then we need a new method for building alignments having a flavor of HSSP alignments (myMSAr). The present study describes a new method and its corresponding databank (SH2QS--database of sequences homologue to the query [structure-having] sequence). Our main interest in making myMSAr was to measure the degree of residue conservation for a given query sequence, regardless of whether it has a corresponding structure deposited in the PDB. In this study, we compare the measurement of residue conservation provided by corresponding alignments produced by HSSP and SH2QS. As a case study, we also present two biologically relevant examples, the first one highlighting the equivalence of analysis of the degree of residue conservation by using HSSP or SH2QS alignments, and the second one presenting the degree of residue conservation for a structure modeled in a computer, which , as a consequence, does not have an alignment reported by HSSP.

The Star STING server: a multiplatform environment for protein structure analysis

Star STING is the latest version of the STING suite of programs and corresponding database. We report on five important aspects of this package that have acquired some new characteristics, designed to add key advantages to the whole suite: 1) availability for most popular platforms and browsers, 2) introduction of the STING_DB quality assessment, 3) improvement in algorithms for calculation of three STING parameters, 4) introduction of five new STING modules, and 5) expansion of the existing modules. Star STING is freely accessible at: http://sms.cbi.cnptia.embrapa.br/SMS/, http://trantor.bioc.columbia.edu/SMS, http://www.es.embnet.org/SMS/, http://gibk26.bse.kyutech.ac.jp/SMS/ and http://www.ar.embnet.org/SMS.

PDB-Metrics: a web tool for exploring the PDB contents

PDB-Metrics (http://sms.cbi.cnptia.embrapa.br/SMS/pdb_metrics/index.html) is a component of the Diamond STING suite of programs for the analysis of protein sequence, structure and function. It summarizes the characteristics of the collection of protein structure descriptions deposited in the Protein Data Bank (PDB) and provides a Web interface to search and browse the PDB, using a variety of alternative criteria. PDB-Metrics is a powerful tool for bioinformaticians to examine the data span in the PDB from several perspectives. Although other Web sites offer some similar resources to explore the PDB contents, PDB-Metrics is among those with the most complete set of such facilities, integrated into a single Web site. This program has been developed using SQLite, a C library that provides all the query facilities of a database management system