RESUMEN
Various posterior tibialis tendon fixation techniques are described in literature. Suture anchor, staple and tenodesis screws are widely used for posterior tibialis tendon transfer, but their stiffness and the maximal ultimate failure load were not tested before. We aimed to compare the initial ultimate failure load and stiffnesses of suture anchor, staple and tenodesis screws on bovine tendon fixation to bovine metaphyseal bone. Thirty-five fresh bovine ankle joints and hooves were obtained from a local abattoir. Metatarsals bones with long extensor tendons were harvested. Staple group had 15, suture anchor group had 10, and tenodesis screw group had 10 samples. All fixations were tested with Instron® ElectroPuls® E10000 Test Instrument. Ultimate failure load and failure location were noted. Staple group's median ultimate failure load was 210.03 N (IQR: 133.43), suture anchor group's was 124.33 N (IQR: 63.67), and tenodesis screw group's was 394.46 N (IQR:115.09). Median stiffness of the staple group was 19.87 N/m (IQR: 15.29); the tenodesis screw group's was 20.28 N/m (IQR: 6.18), the anchor group's was 8.54 N/m (IQR: 4.35). Staples' failure occurred on tendon-staple interface, while suture anchors' occurred on anchor-suture interface and tenodesis screws' occurred on tendon-suture interface. Tenodesis screws' ultimate failure load was the highest (tenodesis vs anchor and staple p < .001 and p = .032, respectively). Staple fixation is less expensive than the other methods and can provide sufficient fixation strength but was weaker than the tenodesis screw fixation. Staples are still a good choice for tendon to bone fixation, whereas the suture anchors provide lower fixation strength at a higher cost.
Asunto(s)
Tenodesis , Humanos , Animales , Bovinos , Tenodesis/métodos , Músculo Esquelético/cirugía , Tornillos Óseos , Fenómenos Biomecánicos , Cadáver , Tendones/cirugía , Anclas para Sutura , Suturas , Transferencia TendinosaRESUMEN
Micromixers play an imperative role in chemical and biomedical systems. Designing compact micromixers for laminar flows owning a low Reynolds number is more challenging than flows with higher turbulence. Machine learning models can enable the optimization of the designs and capabilities of microfluidic systems by receiving input from a training library and producing algorithms that can predict the outcomes prior to the fabrication process to minimize development cost and time. Here, an educational interactive microfluidic module is developed to enable the design of compact and efficient micromixers at low Reynolds regimes for Newtonian and non-Newtonian fluids. The optimization of Newtonian fluids designs was based on a machine learning model, which was trained by simulating and calculating the mixing index of 1890 different micromixer designs. This approach utilized a combination of six design parameters and the results as an input data set to a two-layer deep neural network with 100 nodes in each hidden layer. A trained model was achieved with R2 = 0.9543 that can be used to predict the mixing index and find the optimal parameters needed to design micromixers. Non-Newtonian fluid cases were also optimized using 56700 simulated designs with eight varying input parameters, reduced to 1890 designs, and then trained using the same deep neural network used for Newtonian fluids to obtain R2 = 0.9063. The framework was subsequently used as an interactive educational module, demonstrating a well-structured integration of technology-based modules such as using artificial intelligence in the engineering curriculum, which can highly contribute to engineering education.
RESUMEN
The science of microrobots is accelerating towards the creation of new functionalities for biomedical applications such as targeted delivery of agents, surgical procedures, tracking and imaging, and sensing. Using magnetic properties to control the motion of microrobots for these applications is emerging. Here, 3D printing methods are introduced for the fabrication of microrobots and their future perspectives are discussed to elucidate the path for enabling their clinical translation.
RESUMEN
Microneedle arrays are patches of needles at micro- and nano-scale, which are competent and versatile technologies that have been merged with microfluidic systems to construct more capable devices for biomedical applications, such as drug delivery, wound healing, biosensing, and sampling body fluids. In this paper, several designs and applications are reviewed. In addition, modeling approaches used in microneedle designs for fluid flow and mass transfer are discussed, and the challenges are highlighted.
RESUMEN
Microrobots have attracted the attention of scientists owing to their unique features to accomplish tasks in hard-to-reach sites in the human body. Microrobots can be precisely actuated and maneuvered individually or in a swarm for cargo delivery, sampling, surgery, and imaging applications. In addition, microrobots have found applications in the environmental sector (e.g., water treatment). Besides, recent advancements of three-dimensional (3D) printers have enabled the high-resolution fabrication of microrobots with a faster design-production turnaround time for users with limited micromanufacturing skills. Here, the latest end applications of 3D printed microrobots are reviewed (ranging from environmental to biomedical applications) along with a brief discussion over the feasible actuation methods (e.g., on- and off-board), and practical 3D printing technologies for microrobot fabrication. In addition, as a future perspective, we discussed the potential advantages of integration of microrobots with smart materials, and conceivable benefits of implementation of artificial intelligence (AI), as well as physical intelligence (PI). Moreover, in order to facilitate bench-to-bedside translation of microrobots, current challenges impeding clinical translation of microrobots are elaborated, including entry obstacles (e.g., immune system attacks) and cumbersome standard test procedures to ensure biocompatibility.
Asunto(s)
Robótica , Materiales Inteligentes , Inteligencia Artificial , Humanos , Microtecnología/métodos , Impresión TridimensionalRESUMEN
Fifteen percent of couples of reproductive age suffer from infertility globally and the burden of infertility disproportionately impacts residents of developing countries. Assisted reproductive technologies (ARTs), including in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI), have been successful in overcoming various reasons for infertility including borderline and severe male factor infertility which consists of 20%-30% of all infertile cases. Approximately half of male infertility cases stem from suboptimal sperm parameters. Therefore, healthy/normal sperm enrichment and sorting remains crucial in advancing reproductive medicine. Microfluidic technologies have emerged as promising tools to develop in-home rapid fertility tests and point-of-care (POC) diagnostic tools. Here, we review advancements in fabrication methods for paper-based microfluidic devices and their emerging fertility testing applications assessing sperm concentration, sperm motility, sperm DNA analysis, and other sperm functionalities, and provide a glimpse into future directions for paper-based fertility microfluidic systems.
RESUMEN
Magnetic levitation allows for simulating the microgravity conditions to advance bottom-up tissue engineering, forging regenerative medicine ahead to enable space exploration. Here, magnetic levitation methods for microgravity studies and the biofabrication of 3D cellular structures are discussed.
Asunto(s)
Bioimpresión , Vuelo Espacial , Ingravidez , Bioimpresión/métodos , Fenómenos Magnéticos , Impresión Tridimensional , Medicina Regenerativa/métodos , Ingeniería de Tejidos/métodos , Andamios del Tejido/químicaRESUMEN
Conventional needle technologies can be advanced with emerging nano- and micro-fabrication methods to fabricate microneedles. Nano-/micro-fabricated microneedles seek to mitigate penetration pain and tissue damage, as well as providing accurately controlled robust channels for administrating bioagents and collecting body fluids. Here, design and 3D printing strategies of microneedles are discussed with emerging applications in biomedical devices and healthcare technologies. 3D printing offers customization, cost-efficiency, a rapid turnaround time between design iterations, and enhanced accessibility. Increasing the printing resolution, the accuracy of the features, and the accessibility of low-cost raw printing materials have empowered 3D printing to be utilized for the fabrication of microneedle platforms. The development of 3D-printed microneedles has enabled the evolution of pain-free controlled release drug delivery systems, devices for extracting fluids from the cutaneous tissue, biosignal acquisition, and point-of-care diagnostic devices in personalized medicine.