Investigation of healing strategies in a rat corneal opacity model with polychromatic light and stem cells injection.

Corneal opacities are a major cause of vision loss worldwide. However, the current therapies are suboptimal to manage the corneal wound healing process. Therefore, there is an obvious need to develop new treatment strategies that are efficient in promoting wound healing in patients with severe corneal disorders. In this study, we investigated and compared the efficacy of adipose-derived mesenchymal stem cells (ADMSCs) and photobiomodulation (PBM) with polychromatic light in the NIR (600-1200 nm) alone and in combination, on corneal opacity, inflammatory response, and tissue architecture in a rat corneal opacity model created by mechanical injury. All animals were divided into four groups randomly following the injury: injury only (no treatment), ADMSCs treatment, PBM treatment and combined (ADMSCs+PBM) treatment (n = 12 eyes per group). At the 10th and 30th day following injury, corneal opacity formation, neovascularization, and corneal thickness were assessed. On the 30th day the harvested corneas were analyzed by transmission electron microscopy (TEM), histological evaluation, immunohistochemical (IHC) staining and real-time polymerase chain reaction (RT-PCR). On day 30, the corneal opacity score, neovascularization grade, and corneal thickness in all treatment groups were significantly lower in comparison with the untreated injured corneas. The TEM imaging and H&E staining together clearly revealed a significant enhancement in corneal regeneration with improved corneal microenvironment and reduced vascularization in the combined administration of PBM and ADMSCs compared to treatment of PBM and ADMSCs alone. In addition, the IHC staining, and RT-PCR analysis supported our hypothesis that combining ADMSCs therapy with PBM alleviated the inflammatory response, and significantly decreased scar formation compared to either ADMSCs or PBM alone during the corneal wound healing.

Iontophoresis Corneal Cross-linking With Oxygen Supplementation in Ovine Eyes.

PURPOSE: To evaluate the biomechanical changes and advanced oxidation protein products (AOPP) production after different corneal cross-linking (CXL) protocols with or without oxygen supplementation. METHODS: Ovine eyes in the study were equally distributed to five groups as control, standard Dresden protocol, diluted alcohol- and iontophoresis-assisted CXL (DAI-CXL), and 0.1% and 0.2% riboflavin-mediated iontophoresis-assisted CXL with oxygen supplementation (I-CXL). Corneas that received CXL were divided into two equal parts, one part was used for uniaxial tensiometry and one part was used for AOPP measurement. RESULTS: All treatment groups showed higher Young's modulus and stiffness compared to the control group (P < .05). Both oxygen-assisted I-CXL groups with 0.1% and 0.2% riboflavin concentrations had higher corneal Young's modulus (P = .009 and .006, respectively) and stiffness (P = .009) values, whereas the DAI-CXL group had lesser Young's modulus and stiffness values (P = .032) compared to the Dresden protocol group. All treatment groups showed higher AOPP concentrations compared to the control group (P < .05). DAI-CXL and I-CXL groups showed similar AOPP formation compared to the Dresden protocol (P = .673). CONCLUSIONS: When the epithelium is intact, the desired increase in corneal stiffness might not be achieved. However, increasing the oxygen in the environment might provide a sufficient increase in stiffness in cases undergoing epitheliumon I-CXL, which might be promising in terms of shortening the CXL therapy and decreasing the complications. [J Refract Surg. 2022;38(10):674-681.].

Formulation of chitosan and chitosan-nanoHAp bioinks and investigation of printability with optimized bioprinting parameters.

The development of a chitosan-based bioink that can provide a cell-friendly environment at relatively low concentration and moderate cross-linking conditions is still problematic. Here, we developed amorphous nanohydroxyapatite (nHAp) containing chitosan bioink formulations that can be gelled via the inclusion of glycerol phosphate (GP) and sodium hydrogen carbonate (SHC) into the polymer network under physiological conditions. Rheological analyses indicated that all the formulations showed shear-thinning characteristics compatible with the extrusion-based bioprinting. Also, the chitosan bioinks exhibited more gel-like structure as the weight fraction of nHAp increased from 10 % to 40 %. The printability of the chitosan-based bioinks was assessed and optimized by response surface methodology (RSM). These studies revealed that all the formulations can be successfully printed within the ranges of 50-70 kPa printing pressure and 4-11 mm/s printing speed. Multi-layered chitosan biomaterials with distinct pore structure were successfully fabricated with a high printability index. High cell viability was observed after bioprinting with pre-osteoblastic MC3T3-E1 cells. In conclusion, this study represents for the first time that chitosan biomaterials bearing suitable rheological properties and cellularity can be printed with controllable architecture for 3D bone scaffolds.

Aligned silk fibroin/poly-3-hydroxybutyrate nanofibrous scaffolds seeded with adipose-derived stem cells for tendon tissue engineering.

In this work we investigated tenogenic differentiation of adipose-derived mesenchymal stem cells (AdMSCs), which were seeded onto silk fibroin/poly-3-hydroxybutyrate (SF/P3HB) scaffolds with aligned topography, and high mechanical strength. The electrospinning process was optimized by using the response surface method (RSM) and SF/P3HB nanofibrous matrices with a total polymer concentration of 5% (SF: PHB = 3: 1), flow rate 1 mL/h, collector rotation speed 2000 rpm, applied voltage 14 kV, and collector distance 25 cm were obtained. The average fiber diameter was 699 ± 203 nm and 80% of the nanofibers were aligned within the ±15o range. SF reinforcement reduced the crystallinity of P3HB, and the elastic modulus was found to be 197.0 ± 7.7 MPa. The scaffolds showed bacteriostatic effect. A 21-day of cell culture study was performed with rat rAdMSCs in the absence and presence of tenogenic differentiation factor-5 (GDF-5). The results demonstrated that SF/P3HB scaffolds allow the cells to proliferate and differentiate to the tenocytes. However, no significant effect of GDF-5 on the differentiation of cells was observed. These findings indicated that our aligned SF/P3HB scaffolds have a significant potential to be used for tendon tissue engineering.

Iontophoresis-Assisted Rose Bengal and Green Light Corneal Cross-Linking.

PURPOSE: To evaluate the effects of the application of iontophoresis-assisted rose bengal and green light cross-linking (I-RGX) therapy on enucleated rabbit eyes for corneal biomechanical parameters, dye diffusion rates, and green light levels reaching deep tissues and to compare these parameters with a standard rose bengal and green light cross-linking (RGX) therapy. METHOD: Forty-five enucleated rabbit eyes were used in this study. To evaluate biomechanical changes, corneas were divided into the following 4 groups: the control group, the 0.1% rose bengal application group, the RGX group (100 J/cm), and the I-RGX group (100 J/cm). After this, corneal strips were evaluated with a uniaxial extensometer. To assess corneal dye diffusion, postprocedure dye depth was recorded with anterior segment optic coherence tomography. The amount of irradiation passing through the cornea during irradiation with 250 mW/cm irradiation power was measured with a laser power meter at the first, third, and seventh minutes. RESULTS: In the I-RGX-treated group especially, the mean elastic modulus and corneal stiffness values were about 4.7 times higher when compared with the controls and about 2.2 times higher than those in the RGX group. The rose bengal diffusion depth was 26.63% ± 3.84% of the total corneal thickness in the rose bengal drop group, but this value increased to 42.22% ± 4.77% in the iontophoresis group (<0.001). After iontophoresis, an average of 98% of the 100 J/cm green light was kept in the cornea. CONCLUSIONS: I-RGX is a very useful method for increasing corneal biomechanical strength and is highly effective in increasing the amount of corneal dye diffusion into the cornea while also minimalizing the amount of laser passage reaching deeper tissues.

P2X7 receptor as an independent prognostic indicator in gastric cancer.

Gastric cancer (GC) is one of the foremost causes of cancer-related death around the world. The P2X7 receptor (P2X7R), a member of the P2X7R subfamily of P2 receptors, is a unique molecule that has been shown to affect tumor growth and progression as well as various inflammatory processes, including proliferation of T lymphocytes, release of cytokines, and production of free oxygen radicals. P2X7R has been established as a prognostic parameter in some cancers, and recently, it has been investigated in the development of new targeted therapies. In the present study, we aimed to investigate the prognostic value of P2X7R expression in GC. The expression profile of P2X7R was evaluated immunohistochemically in 156 paraffin-embedded human GC specimens. P2X7R expression was higher in patients with lymph node metastasis than in those without (p < 0.001). P2X7R overexpression was closely related with tumor-infiltrating lymphocytes (TILs) (p = 0.001), vascular invasion (p = 0.006), depth of invasion (p < 0.001), distant metastasis (p < 0.001), and advanced tumor, node, metastasis stage (p < 0.001). Moreover, univariate (hazard ratio [HR] 3.98; 95% confidence interval (CI) 1.89-11.82; p < 0.001) and multivariate (HR 2.24; 95% CI 3.53-12.50; p < 0.001) Cox regression analysis showed that upregulated P2X7R expression clearly correlated with worsened overall survival. In summary, our data revealed that P2X7R may serve as a reliable prognostic parameter and promising therapeutic target for GC.

Intratumoral Cytotoxic T-Lymphocyte Density and PD-L1 Expression Are Prognostic Biomarkers for Patients with Colorectal Cancer.

Background and objectives: Cytotoxic T-lymphocyte (CTL)-mediated inflammatory response to tumors plays a crucial role in preventing the progression of some cancers. Programmed cell death ligand 1 (PD-L1), a cell-surface glycoprotein, has been reported to repress T-cell-mediated immune responses against tumors. However, the clinical significance of PD-L1 in colorectal cancer (CRC) remains unclear. Our aim was to elucidate the prognostic significance of PD-L1 expression and CD8+ CTL density in CRC. Materials and methods: CD8 and PD-L1 immunostaining was conducted on 157 pathologic specimens from patients with CRC. The CD8+ CTL density and PD-L1 expression within the tumor microenvironment were assessed by immunohistochemistry. Results: Tumor invasion (pT) was significantly correlated with intratumoral (p = 0.011) and peritumoral (p = 0.016) CD8+ CTLs density in the tumor microenvironment. In addition, there was a significant difference in the intensity of CD8+ CTLs between patients with and without distant metastases (intratumoral p = 0.007; peritumoral p = 0.037, T-test). Lymph node metastasis (pN) and TNM stage were significantly correlated with PD-L1 expression in CRC cells (p = 0.015, p = 0.029, respectively). Multivariate analysis revealed a statistically significant relationship between the intratumoral CD8+ CTL density and disease-free survival (DFS) (hazard ratio [HR] 2.06; 95% confidence interval [CI]: 1.01-4.23; p = 0.043). The DFS was considerably shorter in patients with a high expression of PD-L1 in cancer cells than those with a low expression (univariate HR 2.55; 95% CI 1.50-4.34; p = 0.001; multivariate HR 0.48; 95% CI 0.28-0.82; p = 0.007). Conversely, patients with high PD-L1 expression in tumor-infiltrating lymphocytes had a longer DFS in both univariate analysis (HR 0.25; 95% CI: 0.14-0.44; p < 0.001) and multivariate analysis (HR 3.42; 95% CI: 1.95-6.01; p < 0.001). Conclusion: The CD8+ CTL density and PD-L1 expression are prognostic biomarkers for the survival of patients with CRC.

Collagen/Beta-Tricalcium Phosphate Based Synthetic Bone Grafts via Dehydrothermal Processing.

Millions of patients worldwide remain inadequately treated for bone defects related to factors such as disease or trauma. The drawbacks of metallic implant and autograft/allograft use have steered therapeutic approaches towards tissue engineering solutions involving tissue regeneration scaffolds. This study proposes a composite scaffold with properties tailored to address the macro- and microenvironmental conditions deemed necessary for successful regeneration of bone in defect areas. The biodegradable scaffold composed of porous beta-tricalcium phosphate particles and collagen type I fibers is prepared from a mixture of collagen type-I and ß-tricalcium phosphate (ß-TCP) particles via lyophilization, followed by dehydrothermal (DHT) processing. The effects of both sterilization via gamma radiation and the use of DHT processing to achieve cross-linking were investigated. The impact of the chosen fabrication methods on scaffold microstructure and ß-TCP particle-collagen fiber combinations were analyzed using X-ray diffractometry (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and microcomputerized tomography (µ-CT). Electron spinning resonance (ESR) analysis was used to investigate free radicals formation following sterilization. Results revealed that the highly porous (65% porosity at an average of 100 µm pore size), mechanically adequate, and biocompatible scaffolds can be utilized for bone defect repairs.