Three-Dimensional Printed Cellulose for Wound Dressing Applications.

Wounds are skin tissue damage due to trauma. Many factors inhibit the wound healing phase (hemostasis, inflammation, proliferation, and alteration), such as oxygenation, contamination/infection, age, effects of injury, sex hormones, stress, diabetes, obesity, drugs, alcoholism, smoking, nutrition, hemostasis, debridement, and closing time. Cellulose is the most abundant biopolymer in nature which is promising as the main matrix of wound dressings because of its good structure and mechanical stability, moisturizes the area around the wound, absorbs excess exudate, can form elastic gels with the characteristics of bio-responsiveness, biocompatibility, low toxicity, biodegradability, and structural similarity with the extracellular matrix (ECM). The addition of active ingredients as a model drug helps accelerate wound healing through antimicrobial and antioxidant mechanisms. Three-dimensional (3D) bioprinting technology can print cellulose as a bioink to produce wound dressings with complex structures mimicking ECM. The 3D printed cellulose-based wound dressings are a promising application in modern wound care. This article reviews the use of 3D printed cellulose as an ideal wound dressing and their properties, including mechanical properties, permeability aspect, absorption ability, ability to retain and provide moisture, biodegradation, antimicrobial property, and biocompatibility. The applications of 3D printed cellulose in the management of chronic wounds, burns, and painful wounds are also discussed.

High yield production of nanocrystalline cellulose from corn cob through a chemical-mechanical treatment under mild conditions.

Agricultural biomass waste such as corn cob is available in large quantities and can be used as renewable materials for various applications. Corn cob was converted into nanocrystalline cellulose by using mild sulfuric acid concentrations (30 % w/v) at low temperature (50 °C) and a relatively shorter time extraction (30 min) combined with mechanical treatment using a conventional high-speed blender. NCC from cellulose and α-cellulose from corn cobs have been successfully isolated with relatively high yields and crystallinities of 50.07-65.33 % and 65.5-69.9 %, respectively. Scanning electron microscopy (SEM) evaluated the morphological variation and dimension from corn cob fiber (CF), delignification fiber (DF), cellulose, and α-cellulose, which shows that each pretreatment stage causes a decrease in fiber diameter from 16.56 to 5.48 µm. Transmission electron microscopy (TEM) images confirmed the nano-scale dimension with fiber diameters ranging between 9.35 nm and 6.51 nm. Thermogravimetric analysis shows that NCC has relatively high thermal stability ranging from 429 to 437 °C. Thus, this characteristic of NCC has the potential to be applied as a reinforcing agent in various fields of polymer composites. Finally, this study presents a method for isolating NCC from corncob waste using a conventional high-speed blender in a mild condition process with a relatively low cost, environmentally friendly pathway, and high yield that was still preserved.

Discriminatory Changes in Circulating Metabolites as a Predictor of Hepatocellular Cancer in Patients with Metabolic (Dysfunction) Associated Fatty Liver Disease.

Introduction: The burden of metabolic (dysfunction) associated fatty liver disease (MAFLD) is rising mirrored by an increase in hepatocellular cancer (HCC). MAFLD and its sequelae are characterized by perturbations in lipid handling, inflammation, and mitochondrial damage. The profile of circulating lipid and small molecule metabolites with the development of HCC is poorly characterized in MAFLD and could be used in future studies as a biomarker for HCC. Methods: We assessed the profile of 273 lipid and small molecule metabolites by ultra-performance liquid chromatography coupled to high-resolution mass spectrometry in serum from patients with MAFLD (n = 113) and MAFLD-associated HCC (n = 144) from six different centers. Regression models were used to identify a predictive model of HCC. Results: Twenty lipid species and one metabolite, reflecting changes in mitochondrial function and sphingolipid metabolism, were associated with the presence of cancer on a background of MAFLD with high accuracy (AUC 0.789, 95% CI: 0.721-0.858), which was enhanced with the addition of cirrhosis to the model (AUC 0.855, 95% CI: 0.793-0.917). In particular, the presence of these metabolites was associated with cirrhosis in the MAFLD subgroup (p < 0.001). When considering the HCC cohort alone, the metabolic signature was an independent predictor of overall survival (HR 1.42, 95% CI: 1.09-1.83, p < 0.01). Conclusion: These exploratory findings reveal a metabolic signature in serum which is capable of accurately detecting the presence of HCC on a background of MAFLD. This unique serum signature will be taken forward for further investigation of diagnostic performance as biomarker of early stage HCC in patients with MAFLD in the future.

Psychological distress during pandemic Covid-19 among adult general population: Result across 13 countries.

The COVID-19 pandemics caused an unprecedented mortality, distress, and globally poses a challenge to mental resilience. To our knowledge, this is the first study that aimed to investigate the psychological distress among the adult general population across 13 countries. This cross-sectional study was conducted through online survey by recruiting 7091 respondents. Psychological distress was evaluated with COVID-19 Peritraumatic Distress Index (CPDI). The crude prevalence of psychological distress due to COVID-19 is highest in Vietnam, followed by Egypt, and Bangladesh. Through Multivariate Logistic Regression Analysis, the respondents from Vietnam holds the highest level of distress, while the respondents from Sri Lanka holds the lowest level of distress with reference to Nepal.Female respondents had higher odds of having reported psychological distress, and those with tertiary education were less likely to report psychological distress compared to those with lower level of education. The findings indicate that psychological distress is varies across different countries. Therefore, different countries should continue the surveillance on psychological consequences through the COVID-19 pandemic to monitor the burden and to prepare for the targeted mental health support interventions according to the need. The coping strategies and social support should be provided especially to the lower educational attainment group.

Human Adipose-Derived Mesenchymal Stem Cells-Incorporated Silk Fibroin as a Potential Bio-Scaffold in Guiding Bone Regeneration.

Recently, stem cell-based bone tissue engineering (BTE) has been recognized as a preferable and clinically significant strategy for bone repair. In this study, a pure 3D silk fibroin (SF) scaffold was fabricated as a BTE material using a lyophilization method. We aimed to investigate the efficacy of the SF scaffold with and without seeded human adipose-derived mesenchymal stem cells (hASCs) in facilitating bone regeneration. The effectiveness of the SF-hASCs scaffold was evaluated based on physical characterization, biocompatibility, osteogenic differentiation in vitro, and bone regeneration in critical rat calvarial defects in vivo. The SF scaffold demonstrated superior biocompatibility and significantly promoted osteogenic differentiation of hASCs in vitro. At six and twelve weeks postimplantation, micro-CT showed no statistical difference in new bone formation amongst all groups. However, histological staining results revealed that the SF-hASCs scaffold exhibited a better bone extracellular matrix deposition in the defect regions compared to other groups. Immunohistochemical staining confirmed this result; expression of osteoblast-related genes (BMP-2, COL1a1, and OCN) with the SF-hASCs scaffold treatment was remarkably positive, indicating their ability to achieve effective bone remodeling. Thus, these findings demonstrate that SF can serve as a potential carrier for stem cells, to be used as an osteoconductive bioscaffold for BTE applications.

Activities of Ca2+-related ion channels during the formation of kidney stones in an infection-induced urolithiasis rat model.

Bacterial infection has long been recognized to contribute to struvite urinary stone deposition; however, its contribution to the development of chronic kidney stones has not been extensively investigated. In the present study, we hypothesized another possible method of bacteria contributing to the formation of calcium oxalate (CaOx) that accounts for the biggest part of the kidney stone. Bacteria may play important roles by influencing renal Ca2+-related ion channel activities, resulting in chronic inflammation of the kidney along with rapid aggregation of stones. We examined the correlation among infection-promoted CaOx kidney stones and alterations in Ca2+-related ion channels in an animal model with experimentally induced Proteus mirabilis and foreign body infection. After the bladder was infected for 7 days, the data demonstrated that stones were presented and induced severe renal tubular breakage as well as altered levels of monocyte chemoattractant protein-1, cyclooxygenase-2, osteopontin, and transient receptor potential vanilloid member 5 expression, reflecting responses of kidney ion channels. Monocyte chemoattractant protein-1, osteopontin, and transient receptor potential vanilloid member 5 expression was significantly downregulated over time, indicating the chronic inflammation phase of the kidney and accelerated aggregation of CaOx crystals, respectively, whereas cyclooxygenase-2 exhibited no differences. These results indicated that bacterial infection is considerably correlated with an alteration in renal Ca2+-related ion channels and might support specific and targeted Ca2+-related ion channel-based therapeutics for urolithiasis and related inflammatory renal damage.

Wet-spinning-based Molding Process of Gelatin for Tissue Regeneration.

This article presents an inexpensive method to fabricate gelatin, as a natural polymer, into monofilament fibers or other appropriate forms. Through the wet spinning method, gelatin fibers are produced by smooth extrusion in a suitable coagulation medium. To increase the functional surface of these gelatin fibers and their ability to mimic the features of tissues, gelatin can be molded into a tube form by referring to this concept. Examined by in vitro and in vivo tests, the gelatin tubes demonstrate a great potential for application in tissue engineering. Acting as a suitable filling gap material, gelatin tubes can be used to substitute the tissue in the damaged area (e.g., in the nervous or cardiovascular system), as well as to promote regeneration by providing a direct replacement of stem cells and neural circuitry. This protocol provides a detailed procedure for creating a biomaterial based on a natural polymer, and its implementation is expected to greatly benefit the development of correlative natural polymers, which help to realize tissue regeneration strategies.

Influence of silk clothing therapy in patients with atopic dermatitis.

The existence of red, inflammatory, and chronic itchy condition in the skin is commonly speculated as the presence of Atopic Dermatitis (AD) in patients. The use of silk clothing as a non-pharmacological approach in the management of AD has been noticed as an effective alternative therapy; however, the evidence based on its usage is poorly served. Hence, we aim to evaluate the effectiveness of using pure silk clothing in the therapy of AD patients. The clinical trial was performed by recruiting 30 patients with AD for up to 8 weeks of observation. They were instructed to wear pure silk clothing for the whole day without any additional medication and were investigated using the AD-related questionnaires. The findings revealed a significant decrease of AD occurrence along with a great improvement of patient's quality of life at each time point. Our investigation demonstrated that this treatment promotes good skin appearance, comfort, and remarkable improvement in the quality of life. This promising preliminary outcome warrants a further study; hence, it can be a potential non-pharmacological treatment choice for controlling the severity of AD.