RESUMEN
INTRODUCTION: This study aimed to evaluate the removal of a biofilm-mimicking hydrogel from isthmus structures in a simulated complex root canal system consisting of 2 curved root canals by Laser-activated irrigation (LAI, AdvErl Evo, Morita) and mechanical activation techniques. METHODS: A 3D-printed root canal model with 2 parallel root canals (60°-curvature, radius 5 mm, dimension 25/.06) with a total length of 20 mm connected via isthmuses (2.5 × 0.4 × 0.2 mm) at 5 mm and 8 mm from the apical endpoint and with lateral canals (diameter 0.2 mm) in all directions at 2, 5, and 8 mm from the apex was filled with a colored biofilm-mimicking hydrogel. Irrigation protocols under continuous irrigation with distilled water (3 × 20s per root canal; 3 ml/20s; n = 20) included conventional needle irrigation (=NI); manual agitation (=MA, gutta-percha point 25/.06); EndoActivator (=SAI-EA, 25/.04); EDDY (=SAI-E, 25/.04); ultrasonically-activated irrigation (=UAI) and LAI (Er:YAG-laser; P400FL tip at canal entrance; 25pps, 50 mJ, 300µs). Removal of the hydrogel was determined as a percentage via standardized photos through a microscope. Statistical analysis was performed using Kruskal-Wallis and Conover tests (P = .05). RESULTS: Laser-activated irrigation (LAI) was associated with the greatest removal of hydrogel from the entire root canal system (P < .05), followed by SAI-E. No significant differences were reported for the coronal isthmus between LAI, SAI-E, NI, and MA (P > .05), but inferior results for SAI-EA and UAI (P < .05). In the apical isthmus, all techniques outperformed UAI (P < .05), with LAI, SAI-E, and NI showing the best results (P < .05). CONCLUSIONS: Laser-activated irrigation (LAI) was superior to other irrigation techniques in the entire root canal system. SAI-E and NI performed comparable to LAI in the isthmuses.
Asunto(s)
Cavidad Pulpar , Irrigantes del Conducto Radicular , Preparación del Conducto Radicular , Irrigación Terapéutica , Irrigación Terapéutica/métodos , Irrigación Terapéutica/instrumentación , Preparación del Conducto Radicular/métodos , Preparación del Conducto Radicular/instrumentación , Irrigantes del Conducto Radicular/administración & dosificación , Humanos , Biopelículas , Impresión TridimensionalRESUMEN
Reciprocating motion expands the lifetime of endodontic instruments during the preparation of severely curved root canals. This study aimed to investigate the time to fracture (TTF) and number of cycles to failure (NCF) of different reciprocating instruments (n = 20 in each group) at body temperature using a dynamic testing model (amplitude = 3 mm). Reciproc Blue (RPB), size 25/.08, WaveOne Gold (WOG) 25/.07, Procodile (Proc) 25/.06, R-Motion (RM_06) 25/.06 and R-Motion (RM_04) 30/.04 instruments were tested in their specific reciprocating motion in artificial matching root canals (size of the instrument ± 0.02 mm; angle of curvature 60°, radius 5.0 mm, and centre of curvature 5.0 mm from apical endpoint). The number of fractured instruments, TTF, NCF, the and lengths of the fractured instruments were recorded and statistically analysed using the Chi-Square or Kruskal-Wallis test. Both TTF (median 720, 643, 562, 406, 254 s) and the NCF (3600, 3215, 2810, 2032, 1482 cycles) decreased in the following order RM_06 > RPB > RM_04 > Proc > WOG with partially significant differences. During testing, only six RM_06 instruments fractured, whereas 16/20 (RPB), 18/20 (Proc), and 20/20 (RM_04, WOG) fractures were recorded (p < 0.05). Within the limitations of the present study, blue-coloured RPB and RM instruments exhibited a significantly superior cyclic fatigue resistance compared to SE-NiTi and Gold-wire instruments. Heat treatment, cross-sectional design and core mass significantly influenced the longevity of reciprocating instruments in cyclic dynamic testing.
RESUMEN
The mandibular premolars can pose a significant challenge in root canal treatment due to their complex canal system. This study investigated the prevalence of multiple roots and complex canal morphology of mandibular premolars in a selected Egyptian sub-population using cone beam computed tomography (CBCT). 283 CBCT scans (131 males, 152 females, age 18-70) included 1132 mandibular premolars (566 first, and 566 second premolars) were viewed for incidences ofvariation in root numbers and canal configuration according to Vertucci's classification. CBCT images were assessed by two endodontists, data were statistically analyzed using Fisher exact and Chi-square tests. The majority of first premolars (85.7%) exhibited a single root, whereas 14.7% had 2 roots with a significantly higher frequency in males (19.8%) than in females (9.5%) (P < .05). The most prevalent type was type I (57.8%), followed by type V (21.7%), while types II and VII made up only 1%. Types V and III were more prevalent among females, while males had a higher prevalence of types I and IV. In 2.5% of cases, mandibular second premolars were found to have 2 roots, with a higher incidence in males (P < .05). Type I canals were significantly more prevalent (90.8%) than other types, followed by type V (5.3%) (P < .05). A statistically significant gender correlation was found regarding root number and canal configuration. It is not uncommon to find mandibular first premolars with two roots in the southern Egyptian population, particularly in males. These observations may be valuable for dentists who treat Southern Egyptians, in Egypt and other countries.
RESUMEN
AIM: To investigate the influence of pulse energy, tip geometry and tip position in simulated 3D-printed root canals with multiple side canals at different levels in all directions on the cleaning performance of laser-activated irrigation (LAI) compared to sonic activation (EDDY) and conventional needle irrigation (NI). METHODOLOGY: 3D-printed root canal models (25/.06, length 20 mm, curvature 60°, radius 5 mm) with side canals (diameter 0.2 mm) at 2, 5 and 8 mm from the apex were filled with coloured biofilm-mimicking hydrogel. LAI (Morita AdvErL Evo, Kyoto, Japan) was performed with six settings (n = 20; pulse-energy, pulses per second [PPS], tip position): LAI1 (50 mJ, 25 PPS, P400FL, canal entrance [CE]), LAI2 (same as LAI1, but insertion depth 9 mm before the apical endpoint [AE] [corresponding to 1 mm above the first lateral canals]), LAI3 (80 mJ, 25 PPS, P400FL, 9 mm before AE), LAI4 (same as LAI 3, but at CE) for 3 × 20 s each, LAI5 (50 mJ, 25 PPS, P400FL 2 × 20 s, CE & R200T (30 mJ, 25 PPS, 1 × 20 s, 9 mm before AE), LAI6 (30 mJ, 25 PPS, R200T, 9 mm before AE, 3 × 20 s). A continuous irrigation (3 mL/20 s) using distilled water accompanied the irrigation cycles. NI and EDDY (3 × 20 s each; 3 mL/20 s irrigation, insertion AE minus 1 mm, amplitude 4 mm) served as control groups. Biofilm-mimicking hydrogel removal (ImageJ, NIH) was assessed for the entire system, the central canal and the lateral canals using standardized photographs with a microscope (Expert DN, Müller-Optronic) and statistically analysed was performed using Kruskal-Wallis and Dunn tests (p = .05). Irrigant extrusion beyond the foramina was also recorded. RESULTS: LAI2 (99.08%; interquartile range [IQR]: 96.85-100.00) and LAI3 (97.50%; 96.24-100.00) achieved the significantly best and LAI6 (80.08%; 73.41-84.69) the significantly worst removal of hydrogel from the entire root canal system amongst all LAI configurations (p < .05). There were no significant differences between LAI6, EDDY (72.89%; 67.49-76.22) and manual irrigation (54.39%; 51.01-56.94) (p > .05). R200T laser tip caused significantly more often irrigant extrusion than all other techniques (p < .05). CONCLUSION: Tip design, energy settings, and the positioning of the laser tip below the canal entrance caused an improvement in cleaning performance of the LAI. However, the small R200T tip created significantly more procedural errors (irrigant extrusion) due to higher concentrated energy.
Asunto(s)
Cavidad Pulpar , Láseres de Estado Sólido , Preparación del Conducto Radicular/métodos , Láseres de Estado Sólido/uso terapéutico , Irrigantes del Conducto Radicular , Hidrogeles , Irrigación Terapéutica/métodosRESUMEN
OBJECTIVES: To investigate the effect of three different calcium silicate-based materials (CSBM) on the biological behavior of human periodontal ligament stem cells (hPDLSCs). METHODS: Eluates of Biodentine, NeoPutty and TheraCal PT prepared at 1:1, 1:2, and 1:4 ratios were extracted under sterile conditions. The cytotoxicity of the extracts to the hPDLSCs was assessed using the MTT assay. Scratch wound healing assay was utilized for assessing cell migration. Scanning electron microscopy was used to detect cell attachment and morphology. Calcium ion release was measured using inductively coupled plasma-optical emission spectrometry; the pH-value was evaluated with a pH-meter. ANOVA with post hoc Tukey test was used for statistical analysis. RESULTS: Cell viability was significantly higher for Biodentine and NeoPutty at day 1 with all dilutions (p < 0.05), while at day 3 and day 7 with dilutions 1:2 and 1:4; all materials showed similar behavior (p > 0.05). Biodentine had the highest percentage of cell migration into the scratched area at day 1 for all dilutions (p < 0.05). Stem cells were attached favorably on Biodentine and NeoPutty with evident spreading, and intercellular communications; however, this was not shown for TheraCal PT. Biodentine showed the highest pH values and calcium ion release (p < 0.05). CONCLUSIONS: The resin-free CSBM showed better performance and favorable biological effects on hPDLSCs and were therefore considered promising for usage as endodontic repair materials. CLINICAL SIGNIFICANCE: Proper selection of materials with favorable impact on the host stem cells is crucial to ensure outcome in different clinical scenarios.
Asunto(s)
Materiales de Obturación del Conducto Radicular , Humanos , Materiales de Obturación del Conducto Radicular/farmacología , Calcio/farmacología , Ensayo de Materiales , Ligamento Periodontal , Compuestos de Calcio/farmacología , Silicatos/farmacología , Células Madre , Óxidos/farmacologíaRESUMEN
INTRODUCTION: To compare the biofilm-mimicking hydrogel removal efficiency of laser-activated irrigation (LAI) with five other irrigation techniques in simulated curved root canals with lateral canals. METHODS: Three-dimensional-printed root canal models (60°-curvature, radius 5 mm; dimension 25/.06) with a total length of 20 mm and lateral canals in all directions at 2, 5, and 8 mm (diameter 0.2 mm) from the apex were filled with a colored biofilm-mimicking hydrogel. The following protocols (each 3 × 20 seconds continuous irrigation with distilled water 3 ml/20 seconds; n = 20) were carried out: conventional needle irrigation; manual agitation ([MA], gutta-percha point 25/.06); EndoActivator (=sonically-activated irrigation EndoActivator, 25/.04); EDDY (=sonically-activated irrigation EDDY [SAI-E]; 25/.04); ultrasonically-activated irrigation and LAI (Erbium-doped Yttrium Aluminum Garnet laser; P400FL tip at canal entrance; 25 pps, 50 mJ, 300 µs). Standardized photos were taken with a microscope and the removal of the hydrogel was determined as a percentage for the entire system, the main canal and the lateral canals. Statistical analysis was performed using analysis of variance and Scheffé test (P = .05). RESULTS: LAI (89.3% ± 5.9%) showed the greatest hydrogel removal followed by SAI-E (65.5% ± 3.3%) and ultrasonically-activated irrigation (59.1% ± 4.7%), with significant differences between these groups (P < .05). Needle irrigation, MA, and sonically-activated irrigation EndoActivator performed equally (P > .05) and obtained the significantly lowest values (P < .05). LAI and SAI-E showed the significantly best hydrogel removal from the main canal (P < .05). At all three levels, LAI removed significantly more hydrogel from the lateral canals than all other techniques (P < .05). CONCLUSIONS: LAI was superior to other techniques in both the entire system and the lateral canals in removing the hydrogel. SAI-E achieved comparable results in the main canal.
RESUMEN
BACKGROUND: Patients diagnosed with an autoimmune disease are often systemically medicated with glucocorticoids. Autoimmune pancreatitis (AIP) Type 1 is considered a rare autoimmune disease, which is very well responsive to glucocorticoids and hence can be treated optionally on a long-term basis using low dose of the drug. Apical lesions of root canal-treated teeth can be solved by retreatment of the preexisting root canal obturation or via surgical approaches. CASE PRESENTATION: This case report relates to a 76-year-old male patient, whose symptomatic acute apical periodontitis was treated nonsurgically by root canal treatment. However, overtime both roots of tooth 46 were associated with asymptomatic apical lesions. Despite progression of the lesions, due to a painless situation, the patient refrained from proceeding with any further treatment options after explaining the pathological pathway with all its consequences. A few years later the patient was prescribed 2.5 mg glucocorticoid prednisone daily for long-term therapy due to an AIP Type 1. Six years later under strict glucocorticoid therapy the apical lesions healed nearly completely and the patient remained free of symptoms without any further interventions. CONCLUSIONS: These observations suggest that prospective clinical studies are required to further elucidate the potential healing effect of systemic long-term low-dose glucocorticoid medication on lesions of endodontic origin.
Asunto(s)
Pancreatitis Autoinmune , Glucocorticoides , Masculino , Humanos , Anciano , Glucocorticoides/uso terapéutico , Estudios Prospectivos , Tratamiento del Conducto Radicular , Obturación del Conducto RadicularRESUMEN
AIM: Orthograde retreatment after failed apicectomy maybe a treatment alternative to endodontic resurgery. The purpose of this study was to examine the clinical outcome of orthograde endodontic retreatment after failed apicectomy. METHODOLOGY: Success was rated radiographically in 191 cases of orthograde retreatment after failed apicectomy that were treated in a private practice with a documented recall of at least 12 months. The radiographs were rated individually by two observers, in cases of disagreement a consensus was reached by joint discussion with a third observer. Success or failure were evaluated according to previously described criteria. The success rate and the median survival were calculated using the Kaplan-Meier survival analysis. The log rank test was used to evaluate the effect of prognostic factors/predictors. Hazard ratios of predictors were analysed using Univariate Cox Proportional Hazard regression analysis. RESULTS: The mean follow-up of the included 191 patients (124 females, 67 males) was 32.13 (±23.68) months and the median was 25 months. The overall recall rate was 54%. Cohen Kappa analysis revealed nearly perfect agreement between both observers (k = 0.81; p = 1.0). The overall percentage of success was 84.82% (complete healing 79.06%, incomplete healing 5.76%). The median survival was 86 months (95% CI: 56-86). None of the selected predictors had an influence on the treatment outcome (p > .05). CONCLUSIONS: Orthograde retreatment should be considered a valuable treatment option after failed apicectomy. A surgical endodontic retreatment can still be a treatment option after orthograde retreatment to obtain outcome for the patient.
Asunto(s)
Apicectomía , Atención Odontológica , Masculino , Femenino , Humanos , Estudios Retrospectivos , Resultado del Tratamiento , Retratamiento , Tratamiento del Conducto RadicularRESUMEN
BACKGROUND: There is tendency for unavoidable sealer extrusion in some clinical cases. This might adversely affect host stem cells and affect healing. This study aimed to investigate the effect of different sealers on the cytocompatibility and osteogenic potential of human periodontal ligament stem cells (hPDLSCs). METHODS: The cytotoxic effect of the extracted elutes of VDW.1Seal (VDW.1), Endosequence BC Sealer HiFlow (ES), GuttaFlow-2 (GF), and ADSeal (AD-S) on the hPDLSCs was determined using the MTT assay. Cell proliferation and migration were assessed by the scratch wound healing assay. Osteogenic differentiation potential was assessed. Measurement of pH values and calcium ions release was performed. RESULTS: GF had a significantly higher percentage of viable cells. The cell migration assay showed that GF demonstrated the lowest open wound area percentage. GF and AD-S showed the highest calcium nodule deposition. GF demonstrated higher ALP activity than ES. Expression of RUNX2 and OC genes was similar for all sealers, while OPG gene expression was significantly higher for VDW.1 and GF. ES and AD-S displayed the highest pH values on day 1. Calcium ion release of ES and VDW.1 was significantly the highest. CONCLUSIONS: GuttaFlow-2 and VDW.1Seal sealers have favorable behavior toward host stem cells.
RESUMEN
BACKGROUND: The diagnosis of the status of the inflamed pulp is essential in clinical diagnosis and treatment provision. There are a limited number of well-designed and well-executed clinical trials on the diagnosis of the true status of the pulp. OBJECTIVES: Three PICO questions were formulated and agreed a priori by the European Society of Endodontology to evaluate the clinical tests for sensibility testing, determination of biomarkers and pulp bleeding with regard to their suitability to correctly diagnose the condition of the pulp tissue for the development of S3-Level guidelines. METHODS: A literature search was conducted using PubMed, Clarivate Analytics' Web of Science, Scopus, Google Scholar and Cochrane Central Register of Controlled Trials from inception to 21 January 2022. Additionally, a hand search was performed, and the contents of the major subject journals were also examined. Eligibility criteria followed the proposed PICO questions. Two independent reviewers were involved in study selection, data extraction and appraising the included studies; disagreements were resolved by a third reviewer. The risk of bias was assessed by the QUADAS-2 tool for diagnostic accuracy studies, the Newcastle-Ottawa scale for noncomparative, nonrandomized studies and the Newcastle-Ottawa Quality Assessment scale adapted for cross-sectional studies. RESULTS: In total, 28 studies out of 29 publications were considered eligible and were included in the review. Twelve studies were identified to investigate the diagnostic accuracy of the pulp vitality. Ten studies fulfilled the criteria to evaluate the diagnostic accuracy of the pulpal conditions, while 6 studies investigating the expression of biomarkers were eligible. Three studies addressing the prognostic factors and therapeutic interventions relating to pulpal status were included. DISCUSSION: The core problem in pulp diagnostics is that a reliable reference standard is lacking under clinical conditions. Based on limited evidence, the most promising current approach seems to define a combination of different clinical tests and symptoms, probably in future including molecular diagnosis ("diagnostic package") will be required to ascertain the best possible strategy to clinically diagnose true pulpal conditions. CONCLUSIONS: The effectiveness of diagnosing pulpitis is low due to limited scientific evidence regarding the accuracy and reproducibility of diagnostic tests. There is a lack of evidence to determine the true status of the pulp or to identify prognostic indicators allowing for a reliable pre-operative estimation of the outcome of vital pulp treatment. REGISTRATION: PROSPERO database (CRD42021265366).
Asunto(s)
Enfermedades de la Pulpa Dental , Pulpitis , Humanos , Pulpitis/diagnóstico , Estudios Transversales , Reproducibilidad de los Resultados , Pulpa Dental , BiomarcadoresRESUMEN
This study aimed to investigate the short- and long-term solubility, alkalizing potential, and suitability for warm-vertical compaction of AH Plus Bioceramic Sealer (AHBC), and Total Fill BC Sealer (TFBC) compared to the epoxy-resin sealer AH Plus (AHP). A solubility test was performed according to ISO specification 6876 and further similar to ISO requirements over a period of 1 month in distilled water (AD) and 4 months in phosphate-buffered saline (PBS). The pH of the immersion solution was determined weekly. Sealers were exposed to thermal treatment at 37, 57, 67, and 97 °C for 30 s. Furthermore, heat treatment at 97 °C was performed for 180 s to simulate inappropriate implementation of warm vertical filling techniques. Physical properties (setting time, flow, film thickness according to ISO 6876) and chemical properties (Fourier transformed infrared spectroscopy) were assessed. AHBC and TFBC were associated with significantly higher solubility than AHP over 1 month in AD and 4 months in PBS (p < 0.05). AHBC and TFBC both reached high initial alkaline pH, while TFBC was associated with a longer-lasting alkaline potential than AHBC. Initial pH of AHBC and TFBC was higher in AD than in PBS. None of the sealers were compromised by thermal treatment.
RESUMEN
Cell cultures can provide useful in vitro models. Since odontoblasts are postmitotic cells, they cannot be expanded in cell cultures. Due to their extension into the dentin, injuries are inevitable during isolation. Therefore, "odontoblast-like" cell culture models have been established. Nowadays, there is no accepted definition of odontoblast-like cell cultures, i.e., isolation, induction, and characterization of cells are not standardized. Furthermore, no quality-control procedures are defined yet. Thus, the aim of this review was to evaluate both the methods used for establishment of cell cultures and the validity of molecular methods used for their characterization. An electronic search was performed in February 2022 using the Medline, Scopus, and Web of Science database identifying publications that used human primary odontoblast-like cell cultures as models and were published between 2016 and 2022. Data related to (I) cell culture conditions, (II) stem cell screening, (III) induction media, (IV) mineralization, and (V) cell characterization were analyzed. The included publications were not able to confirm an odontoblast-like nature of their cell cultures. For their characterization, not only a similarity to dentin but also a distinction from bone must be demonstrated. This is challenging, due to the developmental and evolutionary proximity of these two tissue types.
RESUMEN
BACKGROUND: The aim was to evaluate the remineralization potential as well as the extent of protection against renewed demineralization of enamel by hydroxyapatite-containing toothpaste (Karex) in comparison to fluoride-containing (Elmex) and fluoride- and hydroxyapatite-free toothpaste (Ajona) as control. METHODS: Fifty-seven enamel samples were obtained from 19 human teeth. Five demarcated surfaces were created on each tooth (S0-S4). Four of the surfaces (S1-S4) were exposed to lactic acid (pH 3) for 8 h (demineralization). S0 was left untreated as control. S1 was solely treated with acid. After demineralization, S2 was exposed to Karex for 2 min, of which 15 s were brushing. S3 was treated with Elmex and S4 with Ajona, accordingly. Then, the samples were evaluated using a scanning electron microscope and ImageJ image analysis software to determine the percentage of demineralization. Afterwards, S2-S4 were again exposed to lactic acid for 2 h, and subjected to pixel analysis another time. Data were statistically analysed using ANOVA with post-hoc Scheffé test and the Kurskal-Wallis test. RESULTS: The surfaces treated with Elmex showed the lowest percentage of demineralization (mean 5.01 ± 0.98%) (p < 0.01). Thus, Elmex remineralized more effectively compared to Ajona (8.89 ± 1.41%) and Karex (9.85 ± 1.63%) (p < 0.01). Furthermore, Elmex showed the lowest percentage of demineralized enamel after new demineralization (median 6.29%), followed by Ajona (11.92%) and Karex (13.46%) (p < 0.001). CONCLUSION: In terms of remineralization and protection against renewed demineralization, a hydroxyapatite-containing toothpaste (Karex) appears to be inferior to a fluoride-containing toothpaste (Elmex) and a fluoride- and hydroxyapatite-free toothpaste (Ajona). Hence, the recommendation to use Karex to protect against demineralization should be critically questioned.
Asunto(s)
Desmineralización Dental , Pastas de Dientes , Esmalte Dental , Durapatita/farmacología , Fluoruros/farmacología , Dureza , Humanos , Ácido Láctico/farmacología , Desmineralización Dental/prevención & control , Remineralización Dental/métodos , Pastas de Dientes/farmacologíaRESUMEN
The circulating low-density lipoprotein concentration in blood can be reduced by the administration of statins. Frequently simvastatin (SV) is prescribed. Due to the reported pleiotropic effects of SV the aim of this study was to evaluate mineralization effects on human adipose tissue-derived stromal cells upon administration of SV. After informed consent human adipose tissue-derived stromal cells were obtained from tissue surplus of regular treatments of 14 individuals. According to established protocols after adding various SV concentrations (0.01 µM, 0.1 µM, 1.0 µM, 2.0 µM), alkaline phosphate (osteoblastic marker), mineralization capability and viability were determined at day 18, 21 and 28. The Kruskal-Wallis test was performed for statistical analysis. After adding SV a dose-dependent significant decreased viability and levels of alkaline phosphatase (p < 0.01) and a significantly increased mineralization (p < 0.01) of the primary cultures was recognized during the late mineralization stage. Mineralization of the human adipose tissue-derived stromal cells was induced by SV, possibly originated from alternative pathways than the alkaline phosphatase pathway. Further investigations should be performed regarding switching into the osteoblastic differentiation and as a possible source of cells that can be used as the basis for a potential bone graft substitute, which may allow an extension of the field of application.
Asunto(s)
Fosfatasa Alcalina , Simvastatina , Tejido Adiposo , Fosfatasa Alcalina/metabolismo , Fosfatasa Alcalina/farmacología , Diferenciación Celular , Proliferación Celular , Células Cultivadas , Humanos , Osteoblastos/metabolismo , Osteogénesis , Simvastatina/metabolismo , Simvastatina/farmacología , Células del Estroma/metabolismoRESUMEN
The objective of the study was to evaluate the effect of different restorative protocols on fracture resistance of root canal-treated molars. 48 mandibular first molars were used and divided into six groups (n = 8); G1 (negative control): teeth kept intact. G2 (positive control): teeth had root canal treatment and standard MOD cavity preparations but kept unrestored. G3: prepared as G2 and directly restored with VitaEnamic ceramic overlays (CO). G4: as G3, but the pulp chamber was restored first with smart dental restorative (SureFil SDR flow = SDR) bulk-fill flowable composite base. G5: as G3, but the pulp chamber was restored first with SonicFill (SF) bulk-fill composite base. G6: as G3, but the pulp chamber was restored first with a fiber-reinforced composite (FRC) base. All samples were subjected to thermocycling between 5 °C and 55 °C in a water bath for a total of 2000 cycles with 10 s dwell time. Then specimens were individually mounted on a computer-controlled testing machine with a load cell of 5 kN, and the maximum load to produce fracture (N) was recorded. Data were analyzed using one-way ANOVA followed by Tukey's post hoc test (P = 0.05). There was a significant difference between the groups (P < 0.001). Teeth restored with FRC and ceramic overlays had the highest load-bearing capacity. Pulp chamber restoration with either FRC or SDR before ceramic overlay fabrication provided significantly better tooth reinforcement than ceramic overlay alone (P < 0.001). Fracture modes were analyzed to determine the type of fracture as repairable or catastrophic, where FRC + CO and SDR + CO groups had favorable fracture modes that were mostly repairable. When restoring root canal-treated molars with overlays, the pulp chamber should be sealed with either FRC or SDR to ensure the best possible fracture resistance. The clinical relevance of the study is that a new simple restorative protocol is presented to enhance the survival of root canal-treated molars using ceramic overlays.
Asunto(s)
Fracturas de los Dientes , Diente no Vital , Cerámica , Resinas Compuestas , Cavidad Pulpar , Análisis del Estrés Dental , Vidrio , Humanos , Ensayo de Materiales , Diente Molar , Fracturas de los Dientes/prevención & control , Diente no Vital/terapiaRESUMEN
The aim of this review is to provide a critical overview of the physical properties (surface hardness, cutting efficiency, bending properties, flexibility and cyclic fatigue resistance) of NiTi instruments. Frequently used experimental models regarding these aspects will be presented and discussed with regard to their strengths and weaknesses. For all these aspects, a plethora of experimental models have been described. Based on a critical appraisal and especially taking the appropriate translation of experimental findings to clinical endodontics into account, suggestions for future research based on clearly defined and valid experimental methodologies will be provided. Up to now, very few attempts have been made to assess which particular physical properties of NiTi instruments exert an impact on the clinical outcome of root canal treatment. Departure from merely focusing on physical properties and fracture characteristics towards more biological aspects in terms of treatment outcome is essential.
Asunto(s)
Aleaciones Dentales , Endodoncia , Diseño de Equipo , Ensayo de Materiales , Modelos Teóricos , Preparación del Conducto Radicular , Estrés Mecánico , Propiedades de Superficie , TitanioRESUMEN
OBJECTIVE: This clinical trial aimed to evaluate the effect of nano-silver and nano-calcium hydroxide intracanal medicaments (ICM) during retreatment regarding their antibacterial effect and their effect on post-operative pain and flare-ups. MATERIALS AND METHODS: Sixty-nine patients scheduled for endodontic retreatment were included in this randomized clinical trial and randomly allocated to 3 equal groups (n = 23) according to the type of ICM used. The first microbial sampling (S1) representing the original microbiota was obtained after the removal of the old canal filling. After chemo-mechanical debridement, another sample (S2) was obtained representing the microbial state before ICM application. Patients were randomly allocated to receive either nano-silver (nano-Ag), nano-calcium hydroxide (nano-CH), or calcium hydroxide (CH) as ICM. Patients rated their pain pre-operatively and then after 6, 12, 24, 48, and 72 h. During the second visit (7 days later), the last microbial sample (S3) was obtained after removal of the ICM. Reduction of total bacterial and total E. faecalis counts and the biofilm-forming capability of the existing microbiota were determined. RESULTS: Results showed reduction in total bacterial count, total E. faecalis count and the biofilm-forming,capability of the existing microbiota after chemo-mechanical debridement (S1-S2) and after the application of ICM (S3-S2). However, the reduction after cleaning and shaping was significantly more pronounced (p < 0.001) compared to the effect of ICM application, with no difference between the 3 ICM (p > 0.05). Post-operative pain was significantly reduced at the 48- and 72-h intervals after the application of nano-Ag and nano-CH only (p < 0.001), with no significant difference between these two ICM (p > 0.05). The incidence of flare-ups in all groups was similar (p > 0.05). CONCLUSIONS: The antibacterial effect of the nano-Ag and nano-CH was equivalent to that of CH, but they contributed to better pain control. CLINICAL RELEVANCE: Nanoparticles may have a positive impact on post-endodontic pain.