DFT-Assisted Investigation of the Electric Field and Charge Density Distribution of Pristine and Defective 2D WSe2 by Differential Phase Contrast Imaging.

Most properties of solid materials are defined by their internal electric field and charge density distributions which so far are difficult to measure with high spatial resolution. Especially for 2D materials, the atomic electric fields influence the optoelectronic properties. In this study, the atomic-scale electric field and charge density distribution of WSe2 bi- and trilayers are revealed using an emerging microscopy technique, differential phase contrast (DPC) imaging in scanning transmission electron microscopy (STEM). For pristine material, a higher positive charge density located at the selenium atomic columns compared to the tungsten atomic columns is obtained and tentatively explained by a coherent scattering effect. Furthermore, the change in the electric field distribution induced by a missing selenium atomic column is investigated. A characteristic electric field distribution in the vicinity of the defect with locally reduced magnitudes compared to the pristine lattice is observed. This effect is accompanied by a considerable inward relaxation of the surrounding lattice, which according to first principles DFT calculation is fully compatible with a missing column of Se atoms. This shows that DPC imaging, as an electric field sensitive technique, provides additional and remarkable information to the otherwise only structural analysis obtained with conventional STEM imaging.

Unraveling Electron Dynamics in p-type Indium Phosphide (100): A Time-Resolved Two-Photon Photoemission Study.

Renewable ("green") hydrogen production through direct photoelectrochemical (PEC) water splitting is a potential key contributor to the sustainable energy mix of the future. We investigate the potential of indium phosphide (InP) as a reference material among III-V semiconductors for PEC and photovoltaic (PV) applications. The p(2 × 2)/c(4 × 2)-reconstructed phosphorus-terminated p-doped InP(100) (P-rich p-InP) surface is the focus of our investigation. We employ time-resolved two-photon photoemission (tr-2PPE) spectroscopy to study electronic states near the band gap with an emphasis on normally unoccupied conduction band states that are inaccessible through conventional single-photon emission methods. The study shows the complexity of the p-InP electronic band structure and reveals the presence of at least nine distinct states between the valence band edge and vacuum energy, including a valence band state, a surface defect state pinning the Fermi level, six unoccupied surface resonances within the conduction band, as well as a cluster of states about 1.6 eV above the CBM, identified as a bulk-to-surface transition. Furthermore, we determined the decay constants of five of the conduction band states, enabling us to track electron relaxation through the bulk and surface conduction bands. This comprehensive understanding of the electron dynamics in p-InP(100) lays the foundation for further exploration and surface engineering to enhance the properties and applications of p-InP-based III-V-compounds for, e.g., efficient and cost-effective PEC hydrogen production and highly efficient PV cells.

Defect-Assisted Exciton Transfer across the Tetracene-Si(111):H Interface.

Exciton transfers are ubiquitous and extremely important processes, but often poorly understood. A recent example is the triplet exciton transfer in tetracene sensitized silicon solar cells exploited for harvesting high-energy photons. The present ab initio molecular dynamics calculations for tetracene-Si(111):H interfaces show that Si dangling bonds, intuitively expected to hinder the exciton transfer, actually foster it. This suggests that defects and structural imperfections at interfaces may be exploited for excitation transfer.

Diquat Based Dyes: A New Class of Photoredox Catalysts and Their Use in Aerobic Thiocyanation.

A series of new organic donor-π-acceptor dyes incorporating a diquat moiety as a novel electron-acceptor unit have been synthesized and characterized. The analytical data were supported by DFT calculations. These dyes were explored in the aerobic thiocyanation of indoles and pyrroles. Here they showed a high photocatalytic activity under visible light, giving isolated yields of up to 97 %. In addition, the photocatalytic activity of standalone diquat and methyl viologen through formation of an electron donor acceptor complex is presented.

P-Terminated InP (001) Surfaces: Surface Band Bending and Reactivity to Water.

Stable InP (001) surfaces are characterized by fully occupied and empty surface states close to the bulk valence and conduction band edges, respectively. The present photoemission data show, however, a surface Fermi level pinning only slightly below the midgap energy which gives rise to an appreciable surface band bending. By means of density functional theory calculations, it is shown that this apparent discrepancy is due to surface defects that form at finite temperature. In particular, the desorption of hydrogen from metalorganic vapor phase epitaxy grown P-rich InP (001) surfaces exposes partially filled P dangling bonds that give rise to band gap states. These defects are investigated with respect to surface reactivity in contact with molecular water by low-temperature water adsorption experiments using photoemission spectroscopy and are compared to our computational results. Interestingly, these hydrogen-related gap states are robust with respect to water adsorption, provided that water does not dissociate. Because significant water dissociation is expected to occur at steps rather than terraces, surface band bending of a flat InP (001) surface is not affected by water exposure.

Water/InP(001) from Density Functional Theory.

The interface between water and the In-rich InP(001) surface is studied by density functional theory with water coverage ranging from single molecules to multiple overlayers. Single molecules attach preferably to three-fold coordinated surface In atoms. Water dissociation is energetically favorable but hindered by an energy barrier that decreases with increasing water coverage. There is an attractive interaction between InP adsorbed water molecules that leads to the formation of molecular clusters and complete water films for water-rich preparation conditions. Water films on InP are stabilized by anchoring to surface-bonded hydroxyl groups. With increasing thickness, the water films resemble the structural properties of ice Ih. The oxygen and hydrogen evolution reactions on InP are characterized by overpotentials of the order of 1.7-1.8 and 0.2-0.3 eV, respectively. While the calculated bulk positions of the InP band edges are outside the range of the redox potentials for oxygen and hydrogen evolution within local DFT, the situation is different at the actual interface: Here, the interface dipole lifts the InP valence band maximum above the redox potential for oxygen evolution and favors hydrogen evolution.

Electron-Nuclear Coherent Coupling and Nuclear Spin Readout through Optically Polarized VB- Spin States in hBN.

Coherent coupling of defect spins with surrounding nuclei along with the endowment to read out the latter are basic requirements for an application in quantum technologies. We show that negatively charged boron vacancies (VB-) in hexagonal boron nitride (hBN) meet these prerequisites. We demonstrate Hahn-echo coherence of the VB- spin with a characteristic decay time Tcoh = 15 µs, close to the theoretically predicted limit of 18 µs for defects in hBN. Elongation of the coherence time up to 36 µs is demonstrated by means of the Carr-Purcell-Meiboom-Gill decoupling technique. Modulation of the Hahn-echo decay is shown to be induced by coherent coupling of the VB- spin with the three nearest 14N nuclei via a nuclear quadrupole interaction of 2.11 MHz. DFT calculation confirms that the electron-nuclear coupling is confined to the defective layer and stays almost unchanged with a transition from the bulk to the single layer.

Reconstructions of the As-Terminated GaAs(001) Surface Exposed to Atomic Hydrogen.

We explore the atomic structures and electronic properties of the As-terminated GaAs(001) surface in the presence of hydrogen based on ab initio density functional theory. We calculate a phase diagram dependent on the chemical potentials of As and H, showing which surface reconstruction is the most stable for a given set of chemical potentials. The findings are supported by the calculation of energy landscapes of the surfaces, which indicate possible H bonding sites as well as the density of states, which show the effect of hydrogen adsorption on the states near the fundamental band gap.

Adatom mediated adsorption of N-heterocyclic carbenes on Cu(111) and Au(111).

The adsorption of N-heterocyclic carbenes (NHCs) on Cu(111) and Au(111) surfaces is studied with density-functional theory. The role of the molecular side groups as well as the surface morphology in determining the adsorption geometry are explored in detail. Flat-laying NHCs, as observed experimentally for NHC with relatively small side groups, result from the adsorption at adatoms and give rise to the so-called ballbot configurations, which are more stable than adsorption on flat surfaces and provide an efficient precursor for the formation of bis(NHC) dimers. On Au(111), the resulting (NHC)2 Au complexes are purely physisorbed and thus mobile. On the more reactive Cu(111), in contrast, the central Cu atom in the (NHC)2 Cu dimer is still covalently bound to the surface, resulting in a mobility, which has to be thermally activated.

Spin Polarization, Electron-Phonon Coupling, and Zero-Phonon Line of the NV Center in 3C-SiC.

The nitrogen-vacancy (NV) center in 3C-SiC, the analog of the NV center in diamond, has recently emerged as a solid-state qubit with competitive properties and significant technological advantages. Combining first-principles calculations and magnetic resonance spectroscopy, we provide thorough insight into its magneto-optical properties. By applying resonantly excited electron paramagnetic resonance spectroscopy, we identified the zero-phonon absorption line of the 3A2 → 3E transition at 1289 nm (within the telecom O-band) and measured its phonon sideband, the analysis of which reveals a Huang-Rhys factor of S = 2.85 and a Debye-Waller factor of 5.8%. The low-temperature spin-lattice relaxation time was found to be exceptionally long (T1 = 17 s at 4 K). All these properties make NV in 3C-SiC a strong competitor for qubit applications. In addition, the strong variation of the zero-field splitting in the range 4-380 K allows its application for nanoscale thermal sensing.

Controlled growth of ordered monolayers of N-heterocyclic carbenes on silicon.

N-Heterocyclic carbenes (NHCs) are promising modifiers and anchors for surface functionalization and offer some advantages over thiol-based systems. Because of their strong binding affinity and high electron donation, NHCs can dramatically change the properties of the surfaces to which they are bonded. Highly ordered NHC monolayers have so far been limited to metal surfaces. Silicon, however, remains the element of choice in semiconductor devices and its modification is therefore of utmost importance for electronic industries. Here, a comprehensive study on the adsorption of NHCs on silicon is presented. We find covalently bound NHC molecules in an upright adsorption geometry and demonstrate the formation of highly ordered monolayers exhibiting good thermal stability and strong work function reductions. The structure and ordering of the monolayers is controlled by the substrate geometry and reactivity and in particular by the NHC side groups. These findings pave the way towards a tailor-made organic functionalization of silicon surfaces and, thanks to the high modularity of NHCs, new electronic and optoelectronic applications.

InP and AlInP(001)(2 × 4) Surface Oxidation from Density Functional Theory.

The atomic structure and electronic properties of the InP and Al0.5In0.5P(001) surfaces at the initial stages of oxidation are investigated via density functional theory. Thereby, we focus on the mixed-dimer (2 × 4) surfaces stable for cation-rich preparation conditions. For InP, the top In-P dimer is the most favored adsorption site, while it is the second-layer Al-Al dimer for AlInP. The energetically favored adsorption sites yield group III-O bond-related states in the energy region of the bulk band gap, which may act as recombination centers. Consistently, the In p state density around the conduction edge is found to be reduced upon oxidation.

Photochemical Ring Opening of Oxirane Modeled by Constrained Density Functional Theory.

A constrained density functional theory/classical trajectory surface hopping study of the photochemical dissociation of oxirane (CH2)2O is presented. The calculations confirm the Gomer-Noyes mechanism for the initial reaction and agree largely with experimental photolysis data including reaction yields. The calculated yields, however, depend both on temperature and its modeling. The timescales of the various reaction steps are well below 100 fs, similar to previous time-dependent density functional calculations. At variance with those, however, the present calculations obey Kasha's rule, i.e., the photoreaction is initiated in the energetically lowest excited state.

Toward Efficient Toxic-Gas Detectors: Exploring Molecular Interactions of Sarin and Dimethyl Methylphosphonate with Metal-Centered Phthalocyanine Structures.

The rapid and reliable detection of lethal agents such as sarin is of increasing importance. Here, density-functional theory (DFT) is used to compare the interaction of sarin with single-metal-centered phthalocyanine (MPc) and MPc layer structures to a benign model system, i.e., the adsorption of dimethyl methylphosphonate (DMMP). The calculations show that sarin and DMMP behave nearly identical to the various MPcs studied. Among NiPc, CuPc, CoPc, and zinc phthalocyanine (ZnPc), we find the interaction of both sarin and DMMP to be the strongest with ZnPc, both in terms of interaction energy and adsorption-induced work function changes. ZnPc is thus proposed as a promising sensor for sarin detection. Using X-ray photoelectron spectroscopy, the theoretically predicted charge transfer from DMMP to ZnPc is confirmed and identified as a key component in the sensing mechanism.

Tetracene Ultrathin Film Growth on Hydrogen-Passivated Silicon.

Inorganic-organic interfaces are important for enhancing the power conversion efficiency of silicon-based solar cells through singlet exciton fission (SF). We elucidated the structure of the first monolayers of tetracene (Tc), an SF molecule, on hydrogen-passivated Si(111) [H-Si(111)] and hydrogenated amorphous Si (a-Si:H) by combining near-edge X-ray absorption fine structure (NEXAFS) and X-ray photoelectron spectroscopy (XPS) experiments with density functional theory (DFT) calculations. For samples grown at or below substrate temperatures of 265 K, the resulting ultrathin Tc films are dominated by almost upright-standing molecules. The molecular arrangement is very similar to the Tc bulk phase, with only a slightly higher average angle between the conjugated molecular plane normal and the surface normal (α) around 77°. Judging from carbon K-edge X-ray absorption spectra, the orientation of the Tc molecules are almost identical when grown on H-Si(111) and a-Si:H substrates as well as for (sub)mono- to several-monolayer coverages. Annealing to room temperature, however, changes the film structure toward a smaller α of about 63°. A detailed DFT-assisted analysis suggests that this structural transition is correlated with a lower packing density and requires a well-chosen amount of thermal energy. Therefore, we attribute the resulting structure to a distinct monolayer configuration that features less inclined, but still well-ordered molecules. The larger overlap with the substrate wave functions makes this arrangement attractive for an optimized interfacial electron transfer in SF-assisted silicon solar cells.

Electron paramagnetic resonance study of ferroelectric phase transition and dynamic effects in a Mn2+ doped [NH4][Zn(HCOO)3] hybrid formate framework.

We present an X- and Q-band continuous wave (CW) and pulse electron paramagnetic resonance (EPR) study of a manganese doped [NH4][Zn(HCOO)3] hybrid framework, which exhibits a ferroelectric structural phase transition at 190 K. The CW EPR spectra obtained at different temperatures exhibit clear changes at the phase transition temperature. This suggests a successful substitution of the Zn2+ ions by the paramagnetic Mn2+ centers, which is further confirmed by the pulse EPR and 1H ENDOR experiments. Spectral simulations of the CW EPR spectra are used to obtain the temperature dependence of the Mn2+ zero-field splitting, which indicates a gradual deformation of the MnO6 octahedra indicating a continuous character of the transition. The determined data allow us to extract the critical exponent of the order parameter (ß = 0.12), which suggests a quasi two-dimensional ordering in [NH4][Zn(HCOO)3]. The experimental EPR results are supported by the density functional theory calculations of the zero-field splitting parameters. Relaxation time measurements of the Mn2+ centers indicate that the longitudinal relaxation is mainly driven by the optical phonons, which correspond to the vibrations of the metal-oxygen octahedra. The temperature behavior of the transverse relaxation indicates a dynamic process in the ordered ferroelectric phase.

Water Splitting Reaction at Polar Lithium Niobate Surfaces.

Water splitting is a highly promising, environmentally friendly approach for hydrogen production. It is often discussed in the context of carbon dioxide free combustion and storage of electrical energy after conversion to chemical energy. Since the oxidation and reduction reactions are related to significant overpotentials, the search for suitable catalysts is of particular importance. Ferroelectric materials, for example, lithium niobate, attracted considerable interest in this respect. Indeed, the presence of surfaces with different polarizations and chemistries leads to spatial separation of reduction and oxidation reactions, which are expected to be boosted by the electrons and holes available at the positive and negative surfaces, respectively. Employing the density functional theory and a simplified thermodynamic approach, we estimate the overpotentials related to the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) on both polar LiNbO3 (0001) surfaces. Our calculations performed for ideal surfaces in vacuum predict the lowest overpotential for the hydrogen evolution reaction (0.4 V) and for the oxygen evolution reaction (1.2 V) at the positive and at the negative surfaces, respectively, which are lower than (or comparable with) commonly employed catalysts. However, calculations performed to model the aqueous solution in which the reactions occur reveal that the presence of water substantially increases the required overpotential for the HER, even inverting the favorable polarization direction for oxidation and reduction reactions. In aqueous solution, we predict an overpotential of 1.2 V for the HER at the negative surface and 1.1 V for the OER at the positive surface.

Impact of finite-temperature and condensed-phase effects on theoretical X-ray absorption spectra of transition metal complexes.

The impact of condensed-phase and finite-temperature effects on the theoretical X-ray absorption spectra of transition metal complexes is assessed. The former are included in terms of the all-electron Gaussian and augmented plane-wave approach, whereas the latter are taken into account by extensive ensemble averaging along second-generation Car-Parrinello ab initio molecular dynamics trajectories. We find that employing the periodic boundary conditions and including finite-temperature effects systematically improves the agreement between our simulated X-ray absorption spectra and experimental measurements. © 2018 Wiley Periodicals, Inc.

Unraveling the Oxidation and Spin State of Mn-Corrole through X-ray Spectroscopy and Quantum Chemical Analysis.

The interplay between Mn ions and corrole ligands gives rise to complex scenarios regarding the metal centers' electronic properties expressing a range of high oxidation states and spin configurations. The resulting potential of Mn-corroles for applications such as catalysts or fuel cells has recently been demonstrated. However, despite being crucial for their functionality, the electronic structure of Mn-corroles is often hardly accessible with traditional techniques and thus is still under debate, especially under interfacial conditions. Here, we unravel the electronic ground state of the prototypical Mn-5,10,15-tris(pentafluorophenyl)corrole complex through X-ray spectroscopic investigations of ultrapure thin films and quantum chemical analysis. The theory-based interpretation of Mn photoemission and absorption fine structure spectra (3s and 2p and L2,3-edge, respectively) evidence a Mn(III) oxidation state with an S = 2 high-spin configuration. By referencing density functional theory calculations with the experiments, we lay the basis for extending our approach to the characterization of complex interfaces.

LiNbO3 surfaces from a microscopic perspective.

A large number of oxides has been investigated in the last twenty years as possible new materials for various applications ranging from opto-electronics to heterogeneous catalysis. In this context, ferroelectric oxides are particularly promising. The electric polarization plays a crucial role at many oxide surfaces, and it largely determines their physical and chemical properties. Ferroelectrics offer in addition the possibility to control/switch the electric polarization and hence the surface chemistry, allowing for the realization of domain-engineered nanoscale devices such as molecular detectors or highly efficient catalysts. Lithium niobate (LiNbO3) is a ferroelectric with a high spontaneous polarization, whose surfaces have a huge and largely unexplored potential. Owing to recent advances in experimental techniques and sample preparation, peculiar and exclusive properties of LiNbO3 surfaces could be demonstrated. For example, water films freeze at different temperatures on differently polarized surfaces, and the chemical etching properties of surfaces with opposite polarization are strongly different. More important, the ferroelectric domain orientation affects temperature dependent surface stabilization mechanisms and molecular adsorption phenomena. Various ab initio theoretical investigations have been performed in order to understand the outcome of these experiments and the origin of the exotic behavior of the lithium niobate surfaces. Thanks to these studies, many aspects of their surface physics and chemistry could be clarified. Yet other puzzling features are still not understood. This review gives a résumé on the present knowledge of lithium niobate surfaces, with a particular view on their microscopic properties, explored in recent years by means of ab initio calculations. Relevant aspects and properties of the surfaces that need further investigation are briefly discussed. The review is concluded with an outlook of challenges and potential payoff for LiNbO3 based applications.