Absence of crystals in the phase behavior of hollow microgels.

Solutions of microgels have been widely used as model systems to gain insight into atomic condensed matter and complex fluids. We explore the thermodynamic phase behavior of hollow microgels, which are distinguished from conventional colloids by a central cavity. Small-angle neutron and x-ray scattering are used to probe hollow microgels in crowded environments. These measurements reveal an interplay among deswelling, interpenetration, and faceting and an unusual absence of crystals. Monte Carlo simulations of model systems confirm that, due to the cavity, solutions of hollow microgels more readily form a supercooled liquid than for microgels with a cross-linked core.

Phase behavior of ultrasoft spheres show stable bcc lattices.

The phase behavior of supersoft spheres is explored using solutions of ultralow cross-linked poly(N-isopropylacrylamide)-based microgels as a model system. For these microgels, the effects of the electric charges on their surfaces can be neglected and therefore only the role of softness on the phase behavior is investigated. The samples show a liquid-to-crystal transition at higher volume fraction with respect to both hard spheres and stiffer microgels. Furthermore, stable body centered cubic (bcc) crystals are observed in addition to the expected face centered cubic (fcc) crystals. Small-angle x-ray and neutron scattering with contrast variation allow the characterization of both the microgel-to-microgel distance and the architecture of single microgels in crowded solutions. The measurements reveal that the stable bcc crystals depend on the interplay between the collapse and the interpenetration of the external shell of the ultralow cross-linked microgels.

Dynamic self-assembly of DNA minor groove-binding ligand DB921 into nanotubes triggered by an alkali halide.

We describe a novel self-assembling supramolecular nanotube system formed by a heterocyclic cationic molecule which was originally designed for its potential as an antiparasitic and DNA sequence recognition agent. Our structural characterisation work indicates that the nanotubes form via a hierarchical assembly mechanism that can be triggered and tuned by well-defined concentrations of simple alkali halide salts in water. The nanotubes assembled in NaCl have inner and outer diameters of ca. 22 nm and 26 nm respectively, with lengths that reach into several microns. Our results suggest the tubes consist of DB921 molecules stacked along the direction of the nanotube long axis. The tubes are stabilised by face-to-face π-π stacking and ionic interactions between the charged amidinium groups of the ligand and the negative halide ions. The assembly process of the nanotubes was followed using small-angle X-ray and neutron scattering, transmission electron microscopy and ultraviolet/visible spectroscopy. Our data demonstrate that assembly occurs through the formation of intermediate ribbon-like structures that in turn form helices that tighten and compact to form the final stable filament. This assembly process was tested using different alkali-metal salts, showing a strong preference for chloride or bromide anions and with little dependency on the type of cation. Our data further demonstrates the existence of a critical anion concentration above which the rate of self-assembly is greatly enhanced.

Self-assembled polyoxometalate-dendrimer structures for selective photocatalysis.

We present a novel, self-assembled nanostructure with selective photocatalytic activity formed from anionic polyoxometalate clusters and cationic dendrimers by electrostatic self-assembly. The association of the components in aqueous solution is driven by ionic interaction and steric factors yielding stable aggregates of a defined size with a coil-like structure. The assemblies show high potential for the application in solar-energy conversion systems due to their enhanced and substrate specific photocatalytic activity.

Mixing Block Copolymers with Phospholipids at the Nanoscale: From Hybrid Polymer/Lipid Wormlike Micelles to Vesicles Presenting Lipid Nanodomains.

Hybrids, i.e., intimately mixed polymer/phospholipid vesicles, can potentially marry in a single membrane the best characteristics of the two separate components. The ability of amphiphilic copolymers and phospholipids to self-assemble into hybrid membranes has been studied until now on the submicrometer scale using optical microscopy on giant hybrid unilamellar vesicles (GHUVs), but limited information is available on large hybrid unilamellar vesicles (LHUVs). In this work, copolymers based on poly(dimethylsiloxane) and poly(ethylene oxide) with different molar masses and architectures (graft, triblock) were associated with 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). Classical protocols of LUV formation were used to obtain nanosized self-assembled structures. Using small-angle neutron scattering (SANS), time-resolved Förster resonance energy transfer (TR-FRET), and cryo-transmission electron microscopy (cryo-TEM), we show that copolymer architecture and molar mass have direct influences on the formation of hybrid nanostructures that can range from wormlike hybrid micelles to hybrid vesicles presenting small lipid nanodomains.

Structural Characterization of Lecithin-Stabilized Tetracosane Lipid Nanoparticles. Part I: Emulsions.

The structure of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-stabilized colloidal tetracosane emulsions was investigated by photon correlation spectroscopy and small-angle X-ray and neutron scattering, using emulsions with different neutron scattering contrasts. Special emphasis was placed on the structure of the DMPC stabilizer layer covering the emulsion droplets. A monolayer, structurally similar to a half DMPC bilayer, with a thickness of 16 Å is found. Thereby, the phosphocholine headgroups arrange flat at the oil-water interface. A deep penetration of the tetracosane oil into the stabilizer layer can be ruled out.

Structural Characterization of Lecithin-Stabilized Tetracosane Lipid Nanoparticles. Part II: Suspensions.

Using photon correlation spectroscopy, transmission electron microscopy, microcalorimetry, wide-angle X-ray scattering (WAXS), and small-angle X-ray and neutron scattering (SAXS, SANS), the structure of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-stabilized colloidal tetracosane suspensions was studied from the molecular level to the microscopic scale as a function of the temperature. The platelike nanocrystals exhibit for tetracosane an unusual orthorhombic low-temperature crystal structure. The corresponding WAXS pattern can be reproduced with a predicted orthorhombic unit cell (space group Pca21), which usually occurs only for much longer even-numbered n-alkanes. Special emphasis was placed on the structure of the DMPC stabilizer layer covering the nanocrystals. Their structure was investigated by SAXS and SANS, using suspensions with different neutron scattering contrasts. As for the emulsions in Part I , the crystallized nanoparticles are covered by a DMPC monolayer. Their significant smaller thickness of 10.5 Å (for the emulsions in Part I : 16 Å) could be related to a more tilted orientation of the DMPC molecules to cover the expanded surface of the crystallized nanoparticles.

Unexpected efficiency boosting in CO2-microemulsions: a cyclohexane depletion zone near the fluorinated surfactants evidenced by a systematic SANS contrast variation study.

Microemulsions with supercritical CO2 are promising alternatives for organic solvents, especially if both polar and non-polar components need to be dissolved. However, only fluorinated surfactants, which are known to be environmentally unfriendly, are appropriate to formulate well-structured microemulsions. While most approaches to increase the environmental performance of CO2-microemulsions deal with the design of new surfactants with a reduced degree of fluorination, we discovered that the partial substitution of CO2 by cyclohexane enables a considerable reduction of fluorinated surfactants. Thereby, the most efficient solubilization of the CO2/cyclohexane mixture, which turned out to be pressure-dependent, was found at a cyclohexane-to-CO2 mass ratio between 1 : 6 and 1 : 4. In order to elucidate this unexpected effect a systematic Small Angle Neutron Scattering (SANS) contrast variation study was performed. The analysis of the recorded scattering curves by the Generalized Indirect Fourier Transformation (GIFT) clearly shows that the scattering length density profiles differ considerably from CO2-microemulsions without cyclohexane. Instead of a nearly constant scattering length density, a density profile that varies systematically over half of the droplet radius was detected. These results clearly indicate that the observed efficiency boosting is caused by the formation of a depletion zone of cyclohexane close to the fluorinated amphiphilic film.

Pressure-induced molten globule state of human acetylcholinesterase: structural and dynamical changes monitored by neutron scattering.

We used small-angle neutron scattering (SANS) to study the effects of high hydrostatic pressure on the structure of human acetylcholinesterase (hAChE). At atmospheric pressure, our SANS results obtained on D11 at ILL (Grenoble, France) give a radius of gyration close to that calculated for a mixture of monomers, dimers and tetramers of the enzyme, suggesting a good agreement between hAChE crystal structure and its conformation in solution. Applying high pressure to the sample we found a global compression of about 11% of the enzyme up to a pressure of 900 bar and then again an extension up to 2.1 kbar indicating unfolding of the tertiary structure due to a molten globule (MG) state. On the other hand, we studied the influence of pressure up to 6 kbar on the dynamics of this enzyme, on the backscattering spectrometer IN13 at ILL. For the first time, we used elastic incoherent neutron scattering (EINS) to probe the differences between hAChE in its folded state (N), its high-pressure induced MG state and its unfolded state (U). Especially around the MG state at 1750 bar we found a significant increase in the dynamics, indicating a partial unfolding. A four-step-model is suggested to describe the changes in the protein.

The ultrastructure and flexibility of thylakoid membranes in leaves and isolated chloroplasts as revealed by small-angle neutron scattering.

We studied the periodicity of the multilamellar membrane system of granal chloroplasts in different isolated plant thylakoid membranes, using different suspension media, as well as on different detached leaves and isolated protoplasts-using small-angle neutron scattering. Freshly isolated thylakoid membranes suspended in isotonic or hypertonic media, containing sorbitol supplemented with cations, displayed Bragg peaks typically between 0.019 and 0.023Å(-1), corresponding to spatially and statistically averaged repeat distance values of about 275-330 Å⁻¹. Similar data obtained earlier led us in previous work to propose an origin from the periodicity of stroma thylakoid membranes. However, detached leaves, of eleven different species, infiltrated with or soaked in D2O in dim laboratory light or transpired with D2O prior to measurements, exhibited considerably smaller repeat distances, typically between 210 and 230 Å⁻¹, ruling out a stromal membrane origin. Similar values were obtained on isolated tobacco and spinach protoplasts. When NaCl was used as osmoticum, the Bragg peaks of isolated thylakoid membranes almost coincided with those in the same batch of leaves and the repeat distances were very close to the electron microscopically determined values in the grana. Although neutron scattering and electron microscopy yield somewhat different values, which is not fully understood, we can conclude that small-angle neutron scattering is a suitable technique to study the periodic organization of granal thylakoid membranes in intact leaves under physiological conditions and with a time resolution of minutes or shorter. We also show here, for the first time on leaves, that the periodicity of thylakoid membranes in situ responds dynamically to moderately strong illumination. This article is part of a special issue entitled: photosynthesis research for sustainability: keys to produce clean energy.

Interactions of silica nanoparticles with poly(ethylene oxide) and poly(acrylic acid): effect of the polymer molecular weight and of the surface charge.

The properties and the structure of polymer-modified silica nanoparticles were investigated by several characterization methods, with an emphasis on scattering techniques. Both bare and amino functionalized nanoparticles were used. To determine the effect of the charge, the polymer used was either nonionic poly(ethylene oxide) (PEO) or partially deprotonated poly(acrylic acid) (PAA). The particles coated with PEO were investigated by small-angle neutron scattering using the method of external contrast variation to observe the polymer coverage. The quantity adsorbed was found to be increasing with the molecular weight, and the surface type, bare or aminated, did not have a significant influence on the quantity adsorbed. The adsorption of PAA on positively charged aminated particles was investigated by dynamic light scattering and zeta potential measurements. A charge reversal, from positive to negative, was induced by the presence of PAA. Through the derivation of the structure factor, small-angle X-ray scattering provided significant information on the formation of aggregates at low PAA concentrations.

Network structure of polyfluorene sheets as a function of alkyl side chain length.

The formation of self-organized structures in poly(9,9-di-n-alkylfluorene)s ∼1 vol % methylcyclohexane (MCH) and deuterated MCH (MCH-d(14)) solutions was studied at room temperature using neutron and x-ray scattering (with the overall q range of 0.00058-4.29 Å(-1)) and optical spectroscopy. The number of side chain carbons (N) ranged from 6 to 10. The phase behavior was rationalized in terms of polymer overlap, cross-link density, and blending rules. For N=6-9, the system contains isotropic areas and lyotropic areas where sheetlike assemblies (lateral size of >400 Å) and free polymer chains form ribbonlike agglomerates (characteristic dimension of >1500 Å) leading to a gel-like appearance of the solutions. The ribbons are largely packed together with surface fractal characteristics for N=6-7 but become open networklike structures with mass fractal characteristics for N=8-9, until the system goes through a transition to an isotropic phase of overlapping rodlike polymers for N=10. The polymer order within sheets varies allowing classification for loose membranes and ordered sheets, including the so-called ß phase. The polymers within the ordered sheets have restricted motion for N=6-7 but more freedom to vibrate for N=8-9. The nodes in the ribbon network are suggested to contain ordered sheets cross-linking the ribbons together, while the nodes in the isotropic phase appear as weak density fluctuations cross-linking individual chains together. The tendencies for macrophase separation and the formation of non beta sheets decrease while the proportion of free chains increases with increasing N. The fraction of ß phase varies nonlinearly, reaching its maximum at N = 8.

Drug mimic induced conformational changes in model polymer-drug conjugates characterized by small-angle neutron scattering.

Copolymers based on poly(N-(2-hydroxypropylmethacrylamide)) with conjugated Doxrubicin are established as candidate anticancer therapeutics. Two HPMA-co-polymers (ca. 35000 g mol(-1)) with 2.5 and 8 mol % gly-phe-leu-gly peptidyl side-chain content have been modified using linear hydrocarbon and small aromatic molecules as simple drug mimics. This first contrast-variation SANS study on these systems demonstrates, combined with detailed modeling, a controlled switch from random coil to a more defined morphology induced by inclusion of a series of model drug mimics. Relatively small changes in drug-mimic type and loading can significantly alter the solution conformation, and we tentatively propose a helical type structure that is more or less tightly wound, depending on both hydrophobe loading and type. The results presented have important implications for understanding the influence of conjugate structure on solution properties, which is an important factor influencing biological and clinical activity.

Probing the extent of the Sr2+ ion condensation to anionic polyacrylate coils: a quantitative anomalous small-angle x-ray scattering study.

The shrinking process of anionic sodium polyacrylate (NaPA) chains in aqueous solution induced by Sr2+ counterions was analyzed by anomalous small-angle x-ray scattering. Scattering experiments were performed close to the precipitation threshold of strontium polyacrylate. The pure-resonant scattering contribution, which is related to the structural distribution of the Sr2+ counterions, was used to analyze the extent of Sr2+ condensation onto the polyacrylate coils. A series of four samples with different ratios [Sr2+][NaPA] (between 0.451 and 0.464) has been investigated. From the quantitative analysis of the resonant invariant, the amount of Sr cations localized in the collapsed phase was calculated with concentrations v between 0.94x10(17) and 2.01x10(17) cm(-3) corresponding to an amount of Sr cations in the collapsed phase between 9% and 23% of the total Sr2+ cations in solution. If compared to the concentration of polyacrylate expressed in moles of monomers [NaPA], a degree of site binding of r=[Sr2+][NaPA] between 0.05 and 0.11 was estimated. These values clearly differ from r=0.25, which was established from former light scattering experiments, indicating that the counterion condensation starts before the phase border is reached and increases rather sharply at the border.

Restructuring of colloidal cakes during dewatering.

Aqueous suspensions of aggregated silica particles have been dewatered to the point where the colloidal aggregates connect to each other and build a macroscopic network. These wet cakes have been compressed through the application of osmotic pressure. Some cakes offer a strong resistance to osmotic pressure and remain at a low volume fraction of solids; other cakes yield at low applied pressures, achieving nearly complete solid/liquid separation. We used small angle neutron scattering and transmission electron microscopy to determine the processes by which the particles move and reorganize during cake collapse. We found that these restructuring processes follow a general course composed of three stages: (1) at all scales, voids are compressed, with large voids compressed more extensively than smaller ones; the local order remains unchanged; (2) all voids with diameters in the range of 2-20 particle diameters collapse, and a few dense regions (lumps) are formed; and (3) the dense lumps build a rigid skeleton that resists further compression. Depending on the nature of interparticle bonds, some cakes jump spontaneously into stage 3 while others remain stuck in stage 1. To elucidate the relation between bond strength and compression resistance, we have constructed a numerical model of the colloidal network. In this model, particles interact through noncentral forces that are produced by springs attached to their surfaces. Networks made of bonds that break upon stretching evolve through a plastic deformation that reproduces the three stages of restructuring evidenced by the experiments. Networks made of bonds that are fragile jump into stage 3. Networks made of bonds that can be stretched without breaking evolve through elastic compression and restructure only according to stage 1.

Shrinking of anionic polyacrylate coils induced by Ca2+, Sr2+ and Ba2+: a combined light scattering and ASAXS study.

Anionic polyacrylate chains (NaPA) form precipitates if alkaline earth cations are added in stoichiometric amounts. Accordingly, precipitation thresholds were established for three different alkaline earth cations Ca(2+), Sr(2+) and Ba(2+). Close to the precipitation threshold, the NaPA chains significantly decrease in size. This shrinking process was followed by means of combined static and dynamic light scattering. Intermediates were generated by varying the ratio [MCl(2)]/[NaPA] with M denoting the respective alkaline earth cation. All experiments were performed at an inert salt level of 0.01M NaCl. Similar coil-to-sphere transitions could be observed with all three alkaline earth cations Ca(2+), Sr(2+) and Ba(2+). Based on these findings, supplementary conventional and anomalous small-angle X-ray scattering experiments using selected intermediates close to the precipitation threshold of SrPA were performed. The distribution of Sr counterions around the polyacrylate chains in aqueous solution provided the desired scattering contrast. Energy-dependent scattering experiments enabled successful separation of the pure-resonant terms, which solely stem from the counterions. The Sr(2+) scattering roughly reflects the monomer distribution of the polyacrylate chains. Different ratios of the concentrations of [ SrCl(2)]/[NaPA] revealed dramatic changes in the scattering curves. The scattering curve at the lowest ratio indicated an almost coil-like behaviour, while at the higher ratios the scattering curves supported the model of highly contracted polymer chains. Most of X-ray scattering experiments on intermediate states revealed compact structural elements which were significantly smaller than the respective overall size of the NaPA particles.

Freezing on heating of liquid solutions.

We report a reversible liquid-solid transition upon heating of a simple solution composed of a-cyclodextrine (alpha CD), water, and 4-methylpyridine. These solutions are homogeneous and transparent at ambient temperature and solidify when heated to temperatures between 45 degrees and 75 degrees. Quasielastic and elastic neutron scattering show that molecular motions are slowed down in the solid and that crystalline order is established. The solution "freezes on heating." This process is fully reversible, on cooling the solid melts. A rearrangement of hydrogen bonds is postulated to be responsible for the observed phenomenon.

Understanding the mechanism of action of poly(amidoamine)s as endosomolytic polymers: correlation of physicochemical and biological properties.

Bioresponsive poly(amidoamine)s (PAA)s are currently under development as endosomolytic polymers for intracellular delivery of proteins and genes. Here for the first time, small-angle neutron scattering (SANS) is used to systematically investigate the pH-dependent conformational change of an endosomolytic polymer, the PAA ISA 23. The radius of gyration of the ISA23 was determined as a function of pH and counterion, the aim being to correlate changes in polymer conformation with membrane activity assessed using a rat red blood cell haemolysis assay. With decreasing pH, the ISA23 radius of gyration increased to a maximum (R(g) approximately 80 A) around pH = 3, before subsequently decreasing once more. At high pH and therefore high ionic strengths, the polymer is negatively charged and adopts a rather compact structure (R(g) approximately 20 A), presumably with the dissociated carboxylic groups on the exterior of the polymer coil. At low pH, the coil again collapses (R(g) < 20 A), presumably due to the effects of the high ionic strength. It is concluded that the nature of the salt form has no direct bearing on the size of the polymer coil, but it does indirectly determine the prevailing pH and, hence, polymer conformation. Pulsed-gradient spin-echo NMR measurements were in good agreement with the SANS estimates of the radius of gyration, although ISA23 polydispersity does complicate the data interpretation/comparison. These results support the proposed mode of action of PAAs, namely a coil expansion on passing from a neutral pH (extracellular) to an acidic pH (endosomal and lysosomal) environments. The results do, however, suggest that the charge on the polymer shows a closer correlation with the haemolysis activity rather than the polymer conformation.