RESUMEN
A survey of BPA, BPB, BPF, BADGE and BFDGE contamination in canned beers from the Italian market is reported. An analytical method for the determination of these five bisphenols down to 0.5 ng mL-1 using UPLC with fluorescence detection was developed and validated. A total of 40 canned beers were collected from the market in Southern Italy and analysed. The results showed that only 14 samples were contaminated at concentrations ranging from 0.5 to 2.5 ng mL-1 by at least BPA, BPF and BADGE. No contamination by BPB and BFDGE was detected. This survey suggests that canned beers from the Italian market should represent neither a relevant source of intake of bisphenols nor a risk for consumer's health.
Asunto(s)
Cerveza/análisis , Contaminación de Alimentos/análisis , Compuestos de Bencidrilo/análisis , Cromatografía Liquida/métodos , Compuestos Epoxi/análisis , Italia , Límite de Detección , Fenoles/análisis , Espectrometría de Fluorescencia/métodosRESUMEN
Potentially toxic elements are widespread soil contaminants, whose occurrence could entail a concern for human health upon ingestion of fruit and vegetables harvested in a polluted area. This work set out to evaluate the concentrations of lead and cadmium as well as the levels of thirteen heavy metals for which a limit value is yet to be established by the food safety authorities, in order to perform a risk characterization related to the dietary intake of these metals and to provide a scientific opinion with wider relevance in the light of current worldwide regulatory issues. The sampling consisted of fruit and vegetables grown in a potentially contaminated area of southern Italy due to the illegal dump of hazardous wastes. An evaluation of the dietary exposure through the calculation of the Hazard Index (HI), the Maximum Cumulative Ratio (MCR) and the Target Cancer Risk (TCR) was adopted to this end. The results revealed that about the 30% of samples showed quantifiable levels of chemicals and no significant difference emerged between the potentially polluted area and the nearby cities that were selected as a control landfill site. The overall risk characterization for non-carcinogenic endpoints showed that the HI did not reach unsafe values, except for a small number of samples mainly because of aberrant occurrences and, in any case, the cumulative toxicity was mainly driven by thallium and vanadium. As far as the carcinogenic effects of arsenic are concerned, the distribution of TCR values broadly lay below the safety threshold; a certain percentage of data, however, exceeded this limit and should be taken into account for the enforcement of future regulatory thresholds.
Asunto(s)
Exposición Dietética/análisis , Frutas/química , Metales Pesados/análisis , Contaminantes del Suelo/análisis , Verduras/química , Adulto , Ciudades , Monitoreo del Ambiente , Contaminación Ambiental , Incendios , Humanos , Italia , Metales Pesados/toxicidad , Medición de Riesgo , Contaminantes del Suelo/toxicidadRESUMEN
A new method for simultaneous determination of five bisphenols in canned energy drinks by UPLC with fluorescence detection, after clean up on molecularly imprinted polymers, is herein described. The method was validated at two concentration levels, calculating trueness, repeatability and within-laboratory reproducibility, specificity, linearity of detector response, the limits of quantifications and the limits of detection for each bisphenol. The method is specific, reliable and very sensitive, allowing for determination of bisphenol F diglycidyl ether (BFDGE), bisphenol A (BPA), bisphenol B (BPB), bisphenol F (BPF) and bisphenol A diglycidyl ether (BADGE) down to 0.50ng/mL; it was employed to determine contamination levels from these bisphenols in forty energy drinks of different brands, collected from the market in Naples. BPA was detected in 17 out of 40 samples (42.5%); in some energy drinks also BPF, BADGE and BFDGE were determined.
Asunto(s)
Compuestos de Bencidrilo/análisis , Cromatografía Líquida de Alta Presión/métodos , Bebidas Energéticas/análisis , Compuestos Epoxi/análisis , Impresión Molecular/métodos , Fenoles/análisis , Polímeros/química , Bebidas Gaseosas/análisis , Fluorescencia , Análisis de los Alimentos , Alimentos en Conserva/análisis , Reproducibilidad de los ResultadosRESUMEN
Fumonisins are mycotoxins produced by Fusarium species and affecting maize crops. Some analogues of fumonisins are known for their toxic and possible carcinogenic effects on humans and animals. Because of their occurrence in corn-based food, diet is the main source of exposure to these mycotoxins, especially among people affected by celiac disease. Hence, the purpose of this paper was to evaluate the amount of fumonisins B1, B2 and B3 in maize-based products and to assess the exposure of people affected by celiac disease to fumonisins. The sample consisted of 154 gluten-free products analyzed according to method UNI EN 14352:2005. Results showed a heterogeneous contamination by fumoninisin B1, B2 and B3, although below limits of Commission Regulation No 1126/2007 and consistent with other European literature data. Exposure to fumonisins was evaluated for different age groups. In some cases exposure to fumonisins could not be ignored since the total intake could exceed EFSA Provisional Maximum Tolerable Intake up to 150%. Therefore, in the light of an overall contamination by fumonisins the total dietary exposure could be underrated not only in people affected by celiac disease, but also in non-celiac population.
Asunto(s)
Enfermedad Celíaca/dietoterapia , Dieta Sin Gluten , Exposición a Riesgos Ambientales , Fumonisinas/análisis , Zea mays/química , Carcinógenos Ambientales/análisis , Enfermedad Celíaca/metabolismo , Contaminación de Alimentos/análisis , HumanosRESUMEN
BACKGROUND: Smoked mozzarella is obtained through traditional smoking techniques or the use of liquid smoke. Polycyclic aromatic hydrocarbons (PAHs) may be produced during the organic matrix combustion. The aim of this study was to evaluate benzo[a]pyrene (B(a)P), benzo[a]anthracene (B(a)A), benzo[b]fluoranthene (B(b)FA), benzo[k]fluoranthene (B(k)FA), benzo[ghi]perylene (B(g,h,i)PE), chrysene (CHR), dibenz[a,h]anthracene (DB(a,h)A) and indeno[1,2,3-cd]pyrene (IP) in smoked buffalo mozzarella produced in Campania, evaluating also the influence of the different smoking techniques. Milk and mozzarella of the same batch, before and after smoking, were collected. The detection method was basic hydrolysis, clean-up with silica and detection by HPLC equipped with a fluorescence detector. RESULTS: For milk, only 30% was contaminated. In non-smoked products the medians were >LODs only for B(a)A and CHR. In smoked mozzarellas the highest median was 0.37 ng g(-1) wet weight (CHR). CONCLUSION: It was found that the consumption of this typical food of Campania does not represent a risk for consumers, considering that the incidences on EFSA dietary intake were always lower than 1.5% for mozzarella cheese and lower than 3% for smoked mozzarella cheese.
Asunto(s)
Queso/análisis , Conservación de Alimentos/métodos , Hidrocarburos Policíclicos Aromáticos/química , Animales , Búfalos , Italia , HumoRESUMEN
Bisphenol A (BPA) was determined in sugary carbonated, non-carbonated and milk-based beverages, through HLPC-fluorescence detection and confirmed by LC-MS/MS, in a selection of brands that are mostly consumed by Italian children. The daily intake was determined through the WHO budget method (BM). BPA was found at detectable levels in 57% of carbonated beverages, in 50% of non-carbonated and in 100% of milk-based beverages. The median concentrations were 1.24 µg l(-1) (range = < LOD-4.98 µg l(-1)) in canned carbonated beverages and 0.18 µg l(-1) (< LOD-1.78 µg l(-1)) in non-canned carbonated beverages. In non-carbonated beverages, median concentrations were 0.80 µg l(-1) (< LOD-2.79 µg l(-1)) and 0.18 µg l(-1) (< LOD-3.58 µg l(-1)), respectively, for canned and non-canned beverages; in milk-based products the BPA median concentration was 3.60 µg l(-1) (1.00-17.65 µg l(-1)). BPA daily intake from sugary drink consumption in children ranged from 0.008 to 1.765 µg kg(-1) bw day(-1). The median exposure values for the 'best' and 'worst' cases were 0.16% and 0.47% respectively of the EFSA t-TDI for BPA (4 µg kg(-1) bw day(-1)), and 10.59% and 35.30% of the t-TDI when the maximum levels were considered.
Asunto(s)
Compuestos de Bencidrilo/química , Compuestos de Bencidrilo/toxicidad , Bebidas Gaseosas/análisis , Fenoles/química , Fenoles/toxicidad , Niño , Contaminación de Alimentos/análisis , Embalaje de Alimentos , Humanos , Italia , Medición de RiesgoRESUMEN
Phthalates and bisphenol A (BPA) are ubiquitous contaminants identified as endocrine disruptors. Phthalates are worldwide used as plasticizers, in particular to improve the mechanical properties of polymers such as polyvinyl chloride. Because they are not chemically bound to the polymer, they tend to leach out with time and use. Di-2-ethylhexyl phthalate (DEHP) and di-n-butyl phthalate (DnBP) are the two most common phthalates. BPA is an estrogenic compound used to manufacture polycarbonate containers for food and drink, including baby bottles. It can migrate from container into foods, especially at elevated temperatures. Diet is a predominant source of exposure for phthalates and BPA, especially for infants. The aim of this study was to test the presence of DEHP, DnBP, and BPA in infant formulas. DEHP, DnBP, and BPA concentrations were measured in 22 liquid and 28 powder milks by gas chromatography with flame ionization detection and high performance liquid chromatography with fluorimetric detection, respectively. DEHP concentrations in our samples were between 0.005 and 5.088 µg/g (median 0.906 µg/g), DnBP concentrations were between 0.008 and 1.297 µg/g (median 0.053 µg/g), and BPA concentrations were between 0.003 and 0.375 µg/g (median 0.015 µg/g). Concentrations of the investigated contaminants in liquid and powder milks were not significantly different, even though samples were packed in different types of containers. These data point out potential hazards for infants fed with baby formulas. Contamination seems more related to the production of formulas than to a release from containers.