Multi-site N-Glycan mapping study 2: UHPLC.

In the first part of this publication, the results from an international study evaluating the precision (i.e., repeatability and reproducibility) of N-glycosylation analysis using capillary electrophoresis of APTS-labeled N-glycans were presented. The corresponding results from ultra-high performance liquid chromatography (UHPLC) with fluorescence detection are presented here from 12 participating sites. All participants used the same lot of samples, reagents, and columns to perform the assays. Elution time, peak area and peak area percent values were determined for all peaks ≥0.1% peak area, and statistical analysis was performed following ISO 5725-2 guideline principles. The results demonstrated adequate reproducibility, within any given site as well across all sites, indicating that standard UHPLC-based N-glycan analysis platforms are appropriate for general use.

Mapping the Energetic Epitope of an Antibody/Interleukin-23 Interaction with Hydrogen/Deuterium Exchange, Fast Photochemical Oxidation of Proteins Mass Spectrometry, and Alanine Shave Mutagenesis.

Epitope mapping the specific residues of an antibody/antigen interaction can be used to support mechanistic interpretation, antibody optimization, and epitope novelty assessment. Thus, there is a strong need for mapping methods, particularly integrative ones. Here, we report the identification of an energetic epitope by determining the interfacial hot-spot that dominates the binding affinity for an anti-interleukin-23 (anti-IL-23) antibody by using the complementary approaches of hydrogen/deuterium exchange mass spectrometry (HDX-MS), fast photochemical oxidation of proteins (FPOP), alanine shave mutagenesis, and binding analytics. Five peptide regions on IL-23 with reduced backbone amide solvent accessibility upon antibody binding were identified by HDX-MS, and five different peptides over the same three regions were identified by FPOP. In addition, FPOP analysis at the residue level reveals potentially key interacting residues. Mutants with 3-5 residues changed to alanine have no measurable differences from wild-type IL-23 except for binding of and signaling blockade by the 7B7 anti-IL-23 antibody. The M5 IL-23 mutant differs from wild-type by five alanine substitutions and represents the dominant energetic epitope of 7B7. M5 shows a dramatic decrease in binding to BMS-986010 (which contains the 7B7 Fab, where Fab is fragment antigen-binding region of an antibody), yet it maintains functional activity, binding to p40 and p19 specific reagents, and maintains biophysical properties similar to wild-type IL-23 (monomeric state, thermal stability, and secondary structural features).

Multi-Site N-glycan mapping study 1: Capillary electrophoresis - laser induced fluorescence.

An international team that included 20 independent laboratories from biopharmaceutical companies, universities, analytical contract laboratories and national authorities in the United States, Europe and Asia was formed to evaluate the reproducibility of sample preparation and analysis of N-glycans using capillary electrophoresis of 8-aminopyrene-1,3,6-trisulfonic acid (APTS)-labeled glycans with laser induced fluorescence (CE-LIF) detection (16 sites) and ultra high-performance liquid chromatography (UHPLC, 12 sites; results to be reported in a subsequent publication). All participants used the same lot of chemicals, samples, reagents, and columns/capillaries to run their assays. Migration time, peak area and peak area percent values were determined for all peaks with >0.1% peak area. Our results demonstrated low variability and high reproducibility, both, within any given site as well across all sites, which indicates that a standard N-glycan analysis platform appropriate for general use (clone selection, process development, lot release, etc.) within the industry can be established.

Surface control of blastospore attachment and ligand-mediated hyphae adhesion of Candida albicans.

Adhesion on a surface via nonspecific attachment or multiple ligand-receptor interactions is a critical event for fungal infection by Candida albicans. Here, we find that the tri(ethylene glycol)- and d-mannitol-terminated monolayers do not resist the blastospore attachment, but prevent the hyphae adhesion of C. albicans. The hyphae adhesion can be facilitated by tripeptide sequences of arginine-glycine-aspartic acid (RGD) covalently decorated on a background of tri(ethylene glycol)-terminated monolayers. This adhesion mediated by selected ligands is sensitive to the scrambling of peptide sequences, and is inhibited by the presence of cyclic RGD peptides in the solution.

Application of a kosmotrope-based solubility assay to multiple protein therapeutic classes indicates broad use as a high-throughput screen for protein therapeutic aggregation propensity.

Aggregation propensity is a critical attribute of protein therapeutics that can influence production, manufacturing, delivery, and potential activity and safety (immunogenicity). It is therefore imperative to select molecules with low aggregation propensity in the early stages of drug discovery to mitigate the risk of delays or failure in clinical development. Although many biophysical methods have been developed to characterize protein aggregation, most established methods are low-throughput, requiring large quantities of protein, lengthy assay times, and/or significant upstream sample preparation, which can limit application in early candidate screening. To avoid these limitations, we developed a reliable method to characterize aggregation propensity, by measuring the relative solubility of protein therapeutic candidates in the presence of the kosmotropic salt ammonium sulfate. Manual bench-scale and automated plate-based methods were applied to different protein therapeutic formats including Adnectins, domain antibodies, PEGylated Adnectins, Fc fusion proteins, and monoclonal antibodies. The kosmotrope solubility data agreed well with the aggregation propensity observed by established methods, while being amenable to high-throughput screening because of speed, simplicity, versatility and low protein material requirements. The results suggest that kosmotrope-based solubility assessment has broad applicability to selecting protein therapeutic candidates with low aggregation propensity and high "developability" to progress into development.

Enhanced cell adhesion and mature intracellular structure promoted by squaramide-based RGD mimics on bioinert surfaces.

Highly selective molecular binding and the subsequent dynamic protein assemblies control the adhesion of mammalian cells. Molecules that inhibit cell adhesion have the therapeutic potential for a wide range of diseases. Here, we report an efficient synthesis (2-4 steps) of a class of squaramide molecules that mimics the natural tripeptide ligand Arg-Gly-Asp (RGD) that mediates mammalian cell adhesion through binding with membrane protein integrin. In solution, this class of squaramides exhibits a higher potency at inhibiting mammalian cell adhesion than RGD tripeptides. When immobilized on a bio-inert background formed by self-assembled monolayers of alkanethiols on gold films, squaramide ligands mediate vastly different intracellular structures than RGD ligands. Immunostaining revealed that the focal adhesions are smaller, but with a larger quantity, for cells adhered on squaramides than that on RGD ligands. Furthermore, the actin filaments are also more fibrous and well distributed for cell adhesion mediated by squaramide than that by RGD ligands. Quantification reveal that squaramide ligands mediate about 1.5 times more total focal adhesion (measured by the summation of the area of all focal adhesions) than that by natural RGD ligands. This result suggests that cell adhesion inhibitors, while blocking the attachment of cells to surfaces, may induce more focal adhesion proteins. Finally, this work demonstrates that immobilizing new ligands on bioinert surfaces provide a powerful tool to study mammalian cell adhesion.

Water-driven ligations using cyclic amino squarates: a class of useful SN1-like reactions.

We report a class of water-soluble and -stable cyclic amino squarates that ligate with cysteine or lysine residues without side-products in an entirely aqueous environment. The ligations include addition-elimination reactions that are promoted by water in a way similar to S(N)1 reactions. The structural versatility of the reactants allows the potential recognition of selected amino acid residues on proteins.

Noncovalent polymerization and assembly in water promoted by thermodynamic incompatibility.

This work studies the phase separations between polymers and a small molecule in a common aqueous solution that do not have well-defined hydrophobic-hydrophilic separation. In addition to poly(acrylamide) (PAAm) and poly(vinyl alcohol) (PVA), poly(vinyl pyrrolidone) (PVP) also promotes liquid crystal (LC) droplet formation by disodium cromoglycate (5'DSCG) solvated in water. In the presence of these polymers, the concentration of 5'DSCG needed for forming LC droplets is substantially lower than that needed for forming an LC phase by 5'DSCG alone. To define the concentration ranges that 5'DSCG molecules form liquid crystals (either as droplets or as an isotropic-LC mixture), we constructed ternary phase diagrams for 5'DSCG, water, and a polymer - PVA, PVP, or PAAm. We discovered that PAAm with high molecular weight promotes LC droplet formation by 5'DSCG more effectively than PAAm with low molecular weight. At the same weight percentage, long-chain PAAm can cause 5'DSCG to form LC droplets in water, whereas short-chain PAAm does not. Poly(vinyl pyrrolidone) (PVP), which has functional groups that are more dissimilar to 5'DSCG than PVA and PAAm, promotes LC droplet formation by 5'DSCG more effectively than either of the other two polymers. Additionally, small angle neutron scattering data revealed that the assembly structure of 5'DSCG promoted by the presence of PVA is similar to the thread structure formed by 5'DSCG alone. Together, these results reveal how noncovalent polymerization can be promoted by mixing thermodynamically incompatible molecules and elucidate the basic knowledge of nonamphiphilic colloidal science.

Selective immobilization of peptides exclusively via N-terminus cysteines by water-driven reactions on surfaces.

Immobilizing peptides or proteins on bioinert surfaces enables the elucidation of ligand-receptor interaction in complex biological systems. Here, we report a highly chemoselective surface reaction that immobilizes peptides exclusively via N-terminus cysteine residue in a peptide. At pH 5.5, only N-terminus cysteines of peptides couple covalently with phenoxy amino squarate moieties presented on self-assembled monolayers (SAMs) of alkanethiols on gold films. The selectivity of this surface reaction can tolerate the presence of internal cysteines in close proximity to basic residues such as histidines. We demonstrated this selective surface reaction by mammalian cell adhesion and by SAMDI mass spectroscopy of the SAMs.

Water-driven chemoselective reaction of squarate derivatives with amino acids and peptides.

Here, we report a new class of highly chemoselective reactions between squarate derivatives and the amino acid cysteine or unprotected peptides with a N-terminus cysteine that proceed most efficiently in entirely aqueous solution at neutral pH. Kinetic and structural studies reveal that the presence of hydrogen bonding in water is primarily responsible for both the high yield and fast rate of the reaction.

Water-in-water emulsions stabilized by non-amphiphilic interactions: polymer-dispersed lyotropic liquid crystals.

Emulsion systems involving surfactants are mainly driven by the separation of the hydrophobic interactions of the aliphatic chains from the hydrophilic interactions of amphiphilic molecules in water. In this study, we report an emulsion system that does not include amphiphilic molecules but molecules with functional groups that are completely solvated in water. These functional groups give rise to molecular interactions including hydrogen bonding, pi stacking, and salt bridging and are segregated into a dispersion of droplets forming a water-in-water emulsion. This water-in-water emulsion consists of dispersing droplets of a water-solvated biocompatible liquid crystal--disodium cromoglycate (DSCG)--in a continuous aqueous solution containing specific classes of water-soluble polymers. Whereas aqueous solutions of polyols support the formation of emulsions of spherical droplets consisting of lyotropic liquid crystal DSCG with long-term stability (for at least 30 days), aqueous solutions of polyamides afford droplets of DSCG in the shape of prolate ellipsoids that are stable for only 2 days. The DSCG liquid crystal in spherical droplets assumes a radial configuration in which the optical axis of the liquid crystal aligns perpendicular to the surface of the droplets but assumes a tangential configuration in prolate ellipsoids in which the optical axis of the liquid crystal aligns parallel to the surface of the droplet. Other classes of water-soluble polymers including polyethers, polycations, and polyanions do not afford a stable emulsion of DSCG droplets. Both the occurrence and the stability of this unique emulsion system can be rationalized on the basis of the functional groups of the polymer. The different configurations of the liquid crystal (DSCG) droplets were also found to correlate with the strength of the hydrogen bonding that can be formed by the functional groups on the polymer.

A biocompatible surfactant with folded hydrophilic head group: enhancing the stability of self-inclusion complexes of ferrocenyl in a beta-cyclodextrin unit by bond rigidity.

This work reports a new biocompatible surfactant structure, of which the hydrophilic head group is composed of a folded, stable self-inclusion complex of a ferrocenyl substituted beta-cyclodextrin (betaCD). While multiple intra- or intermolecular complexes can exist for this amphiphile, the molecule folds into a unique intramolecular complex with well-defined conformation, in which part of the aliphatic chain and the ferrocene group are both included in the annular cavity of betaCD. Study of different isosteric covalent linkages indicates that this folded structure is stable against displacement by the presence of other small guest molecules. Furthermore, in contrast to ferrocene-CD conjugates that are without the aliphatic chain, the presence of small guest molecules in solution does not influence at all the induced circular dichroism signal of this amphiphile, indicating a sterically congested, but stable, folded conformation of the inclusion complex. This new amphiphile is surface active and, more importantly, does not denature the membrane protein bacteriorhodopsin. Finally, because this surfactant forms self-assembled aggregates, this work introduces a folded structure into soft matters formed by amphiphiles in water.