Biocatalytic lipoprotein bioamphiphile induced treatment of recalcitrant hydrocarbons in petroleum refinery oil sludge through transposon technology.

The present investigation employed transposon technology to enhance the degradation of recalcitrant petroleum hydrocarbons present in petroleum oil sludge by using biosurfactant hyper-producing strain Enterobacter xiangfangensis STP-3. Out of 2500 transposon induced mutants, mutants M257E.xiangfangensis and M916E.xiangfangensis hyper-produce biocatalytic lipoprotein biosurfactant by1.98 and 2.34 fold higher than wild-type strain. Transposon induced mutation also modified the amino acid composition which improved the hydrophobicity and thermal stability of the biosurfactants produced by mutants, compared to the wild-type biosurfactant. GC-MS and LC-MS-MS revealed that biosurfactants have pentameric lipid moiety and esterase as protein moiety. Increased biosurfactant hydrophobicity and yield by the mutants resulted in the enhanced bioavailability of petroleum hydrocarbons, thereby mutants M257E.xiangfangensis and M916E.xiangfangensis demonstrated better petroleum oil sludge degradation by 82% and 88% respectively, than wild-type (72%). Disrupted genes vgr G and pgm M in M257E.xiangfangensis and M916E.xiangfangensis respectively hyper-produce biosurfactant by competitive pathway inhibition and increased precursor availability mechanism. Hyper-production of biosurfactant was also validated by comparing the expression of biosynthetic genes ent E, ent F and est using qPCR. This is the first report on the application of transposon technology to hyper-produce biosurfactant for the effective bioremediation of hydrocarbon contaminated environments.

Biosequestration of lignin in municipal landfill leachate by tailored cationic lipoprotein biosurfactant through Bacillus tropicus valorized tannery solid waste.

Bioremediation of municipal landfill leachate (MLL) is often intricate due to presence of refractory lignin. In the present study, it was attempted to tailor the histidine rich protein moiety of cationic lipoprotein biosurfactant (CLB) to sequester the lignin from MLL. Animal fleshing (AF), the solid waste generated in tanning industry was utilized for the production of histidine rich CLB by de novo substrate dependent synthesis pathway involving Bacillus tropicus. The optimum conditions for the maximum production of CLB were determined using response surface methodology. At the optimized conditions, the maximum yield of CLB was 217.4 mg/g AF (on dry basis). The produced histidine rich CLB was purified using Immobilized metal affinity chromatography at the optimum binding and elution conditions. The histidine residues were more pronounced in the CLB, as determined by HPLC analysis. The CLB was further characterized by SDS-PAGE, Zeta potential, XRD, FT-IR, Raman, NMR, GC-MS and TG analyses. The CLB was immobilized onto functionalized nanoporous activated bio carbon (FNABC) and the optimum immobilization capacity was found to be 211.6 mg/g FNABC. The immobilization of CLB onto FNABC was confirmed using SEM, FT-IR, XRD and TG analyses. The isotherm models, kinetic and thermodynamics studies of CLB immobilization onto FNABC were performed to evaluate its field level application. Subsequently, the CLB-FNABC was then applied for the sequestration of lignin in MLL. The maximum lignin sequestration was achieved by 92.5 mg/g CLB-FNABC at the optimized sequestration time, 180 min; pH, 5; temperature, 45 °C and mass of CLB-FNABC, 1.0 g. The sequestration of lignin by CLB- FNABC was confirmed by SEM, FT-IR and UV-Vis analyses. Further, the mechanistic study revealed the anchoring of CLB onto the surface of lignin through electrostatic interaction.

Biodegradation of petroleum refining industry oil sludge by microbial-assisted biocarrier matrix: process optimization using response surface methodology.

Safe disposal of petroleum oil sludge generated from crude oil storage tank bottom is a major challenge for petroleum refineries across the globe. The presence of long chain hydrocarbons in petroleum oil sludge are known to have effects on the environment through bioaccumulation or biosorption. The present study was focused to develop a modified bioremediation process using hydrocarbonoclastic microbial-assisted biocarrier matrix (MABC) mediated through biosurfactants and biocatalysts for the efficient treatment of petroleum industrial oily sludge. The development of hydrocarbonoclastic microbial-assisted biocarrier matrix was confirmed by scanning electron microscopy analysis. The biocatalysts such as lipase, laccase, esterase and biosurfactant produced by MABC system were found to be 40 U/mg, 18 U/mg, 36 U/mg and 220 mg/g of oil sludge respectively using one variable at a time approach. Further, the response surface methodology was used to determine the optimum treatment conditions (Time, pH, Mass of biocarrier matrix and Amount of oil sludge) for the enhanced removal of total petroleum hydrocarbons (TPH) present in the oil sludge and TPH was degraded by 88.78% at Hydraulic Retention Time of 7 days. The biodegradation of oil sludge was confirmed using Gas Chromatography-Mass Spectrometry analysis.

Nano fibrous carbon produced from chromium bearing tannery solid waste as the bitumen modifier.

Bitumen binders play a major role in reducing the aging and oxidation property of bitumen. Carbon nanomaterials act as an effective bitumen modifier due to its stiffness and strength. Thus, nano fibrous carbon (NFC) was prepared from Chrome Tanned Buffing Dust (a solidwaste generated from leather industries) with proper care of avoiding oxidation of Cr(III) to Cr(VI) through pulse pyrolysis system. Morphology analysis using TEM confirmed the nano fibrous structure of NFC. XRD pattern of NFC depicts the graphitic phases of carbon along with the Cr2O3. Prepared NFC has been used as bitumen modifier and the blending of NFC with bitumen were done using both conventional and microwave heating methods to study the proper blending methods to enhance the bitumen properties. Thermogram of the modified bitumen showed that the decomposition temperature increases by increasing the percentage of NFC (5-25%) in both the heating methods, but comparatively the thermal stability is more in microwave mixing than in conventional mixing. The morphology analysis of the modified bitumen showed that non-uniform blending in conventional type of heating and homogeneously blended mixture in microwave type of heating. The penetration value and ductility decreases while softening point and kinematic viscosity increases by increasing the quantity of NFC from 5 to 25% in modified bitumen. Microwave heat mixing method yielded better modified bitumen with NFC than conventional heating method in terms of stability, uniform blending and physical properties. The non-leachability of the Cr(III) in the NFC modified bitumen was confirmed through total chromium analysis in the leachate. But, chromium analysis in leachate of NFC immersed in acetate buffer for one month showed leaching of Cr(III) 5.5 µg/L in the 25% NFC modified bitumen block mixed using conventional heating method.

Integrated thermophilic enzyme-immobilized reactor and high-rate biological reactors for treatment of palm oil-containing wastewater without sludge production.

Bacillus pumilus, the thermophilic microorganism, was used to biosynthesise lipase of specific activity 5173 U. The purified lipase was highly stable in the pH range from 1 to 7 and temperature at 50 °C. The functionalized nanoporous activated carbon matrix was used for the immobilization of lipase at the optimum conditions and was used for the hydrolysis of palm oil-containing wastewater at optimum time, 3 h, pH 7, and at temperature 50 °C. The hydrolyzed palm oil wastewater was treated in an upflow anaerobic reactor for the removal of soluble COD at hydraulic retention time (HRT) of 3 days. The anaerobic-treated wastewater was applied to the fluidized immobilized carbon catalytic oxidation (FICCO) reactor at HRT of 16 h to reduce the soluble COD. The FICCO-treated wastewater was further treated in chemo-autotrophic activated carbon oxidation (CAACO) reactor to reduce the COD less than 100 mg/L.

Antioxidant and antimicrobial activity of bioactive prodigiosin produces from Serratia marcescens using agricultural waste as a substrate.

The objective of this investigation was to explore the antioxidant and antimicrobial property of bioactive prodigiosin produced from Serratia marcescens using rice bran. The antioxidant potential of prodigiosin was examined by 2, 2-diphenyl-1-picrylhydrazyl (DPPH) and 2, 2'-azino-bis 3-ethylbenzthiazoline-6-sulfonic acid (ABTS) radical scavenging method via UV-visible, electron spin resonance spectrum (ESR), cyclic voltammetry and excitation emission spectrum. The antimicrobial activity of prodigiosin was examined against foodborne pathogens. The shelf life extending capacity of prodigiosin was evaluated with meat extract powder (MEP) as a model food material. The DPPH and ABTS radicals were completely scavenged by prodigiosin at the concentration of 10 mg/L. The food spoilage was inhibited by the addition of prodigiosin with MEP and it was compared with conventional preservative. The prodigiosin has prohibited the growth of foodborne pathogens effectively and the shelf life of the food was also extended significantly. The antimicrobial edible preservative developed in this study inhibited the growth of the microbial populations that produced through storage of the MEP and free radical scavenging activity. The results reveal that the bioactive prodigiosin effectively scavenged the free radical and inhibited the bacterial growth in food stuff.

Anaerobic digestion of sulphate-rich post-tanning wastewater at different COD/sulphate and F/M ratios.

Anaerobic digestion of post-tanning wastewater was performed in batch anaerobic digester to evaluate the effect of COD/sulphate ratio [0.62, 0.69, and 1.20 (w/w) %] and F/M ratio [0.2, 0.3, 0.5, 0.7, 0.9, 1.1, 1.3, and 1.5 (w/w) %)] on the removal efficiency of COD. The F/M ratio of 0.3 was found to be the optimum ratio for the removal of COD by 53, 57, and 65%, respectively at COD/sulphate ratio of 0.62, 0.69, and 1.20. The maximum sulphate removal was observed at F/M ratio of 0.2 and the removal efficiency was 48, 50, and 58% at COD/sulphate ratio of 0.62, 0.69, and 1.20, respectively. The removal efficiency of COD and sulphate was increased with increase in COD/sulphate ratio from 0.62 to 1.20 and decreased with increase in F/M ratio from 0.2 to 1.5 in anaerobic digestion of post-tanning wastewater. The maximum concentration of sulphide formation was 784 mg/L at COD/sulphate ratio of 0.62 in anaerobic digestion process and the process was inhibited at this sulphide concentration. The microbial activity in the sludge was evaluated through live and dead cell assay using fluorescent microscopy. The maximum amount of dead microbes was observed in the anaerobic digester, which was operated at COD/sulphate ratio of 0.62 than other studied ratio.

Synthesis of Surface-Modified Iron Oxides for the Solvent-Free Recovery of Bacterial Bioactive Compound Prodigiosin and Its Algicidal Activity.

Prodigiosin (PG) is a bioactive compound produced by several bacterial species. Currently, many technologies are being developed for the production of PG by fermentation processes. However, new challenges are being faced with regard to the production of PG in terms of the recovery and purification steps, owing to the labile nature of PG molecules and the cost of the purification steps. Conventional methods have limitations due to high cost, low reusability, and health hazards. Hence, the present investigation was focused on the development of surface-functionalized magnetic iron oxide ([Fe3O4]F) for solvent-free extraction of bioactive PG from the bacterial fermented medium. Fe3O4 was functionalized with diethanolamine and characterized by FT-IR, diffuse reflectance spectroscopy, thermogravimetric analysis, scanning electron microscopy, and confocal microscopy. The various process parameters, such as contact time, temperature, pH, and mass of Fe3O4, were optimized for the extraction of PG using functionalized Fe3O4. Instrumental analyses confirmed that the PG molecules were cross-linked with functional groups on [Fe3O4]F through van der Waals forces of attraction. PG extracted through Fe3O4 or [Fe3O4]F was separated from the fermentation medium by applying an external electromagnetic field and regenerated for successive reuse cycles. The purity of the extracted PG was characterized by high-performance liquid chromatography, FT-IR, and UV-visible spectroscopy. The iron oxide-diethanolamine-PG cross-linked ([Fe3O4]F-PG) composite matrix effectively deactivates harmful fouling by cyanobacterial growth in water-treatment plants. The present investigation provides the possibility of solvent-free extraction of bacterial bioactive PG from a fermented medium using functionalized magnetic iron oxide.

In situ generation of hydroxyl radical by cobalt oxide supported porous carbon enhance removal of refractory organics in tannery dyeing wastewater.

In this study, cobalt oxide doped nanoporous activated carbon (Co-NPAC) was synthesized and used as a heterogeneous catalyst for the Fenton oxidation of organic dye chemicals used in tannery process. The nanoporous activated carbon (NPAC) was prepared from rice husk by precarbonization followed by chemical activation at elevated temperature (600 °C). The cobalt oxide was impregnated onto NPAC and characterized for UV-visible, Fluorescence spectroscopy, FT-IR, HR-TEM, XRD, BET surface area and XPS analyses. The hydroxyl radical generation potential of Co-NPAC from hydrogen peroxide decomposition was identified (λ(exi), 320 nm; λ(emi), 450 nm) by Excitation Emission Spectra (EES) analysis. The conditions for the degradation of tannery dyeing wastewater such as, Co-NPAC dose, concentration of H2O2, and temperature were optimized in heterogeneous Fenton oxidation process and the maximum percentage of COD removal was found to be 77%. The treatment of dyes in wastewater was confirmed through UV-Visible spectra, EES and FT-IR spectra analyses.

Influence of fermented tannery solid waste on morphological, biochemical, yield and nutritional responses of tomato plants.

The non-tanned proteinaceous tannery solid waste animal fleshing (ANFL), containing high nutritive value, was hydrolyzed using bacteria Selenomonas ruminantium HM000123 through submerged (SmF) and solid-state (SSF) fermentation processes. In addition, the effects of ANFL fermentative hydrolysate on growth, yield and biochemical properties of tomato plants were investigated. The treatments included T1 (SmF-ANFL), T2 (SSF-ANFL), T3 (recommended dose of NPK fertilizers) and a control without any amendment. Hydrolysates of both SmF-ANFL and SSF-ANFL treatments increased the biomass and yield as evidenced by plant height, stem girth, number of leaves and fruit yield when compared with both NPK and control plants. In this 90-day study, significant (p ≤ 0.05) changes were observed in SSF-ANFL treated plants compared to the other treatments. Protein profile analyzed through SDS-PAGE indicates the expression of a high molecular weight protein (205 kDa) and other proteins in the leaves of the SSF-ANFL treated plants. Overall results revealed that SSF-ANFL can be successfully utilized as a fertilizer particularly for cultivating tomato plants.

Separation of sodium chloride from the evaporated residue of the reverse osmosis reject generated in the leather industry--optimization by response surface methodology.

Reverse osmosis (RO) concentrate is being evaporated by solar/thermal evaporators to meet zero liquid discharge standards. The resulted evaporated residue (ER) is contaminated with both organic and inorganic mixture of salts. The generation of ER is exceedingly huge in the leather industry, which is being collected and stored under the shelter to avoid groundwater contamination by the leachate. In the present investigation, a novel process for the separation of sodium chloride from ER was developed, to reduce the environmental impact on RO concentrate discharge. The sodium chloride was selectively separated by the reactive precipitation method using hydrogen chloride gas. The selected process variables were optimized for maximum yield ofNaCl from the ER (optimum conditions were pH, 8.0; temperature, 35 degrees C; concentration of ER, 600 g/L and HCl purging time, 3 min). The recovered NaCl purity was verified using a cyclic voltagramm.

Production of prodigiosin using tannery fleshing and evaluating its pharmacological effects.

AIM: The focal theme of present investigation includes isolation of prodigiosin producing fish gut bacteria, enhancing its production using tannery solid waste fleshing, and evaluation of its pharmacological effect. METHODS: Optimization of fermentation conditions to yield maximum prodigiosin, and instrumental analysis using FTIR, NMR, ESI-MS, TGA, and DSC. RESULTS: The optimum conditions required for the maximum prodigiosin concentration were achieved at time 30 h, temperature 30°C, pH 8, and 3% substrate concentration. The secondary metabolite was analyzed using ESI-MS, FTIR, and NMR. Therapeutic efficacy was assessed by in vitro anticancer studies. Among the pathogenic bacteria Pseudomonas aeruginosa was most susceptible at the lowest concentration followed by Salmonella typhi. IC50 concentration was cell line specific (HeLa cells: 4.3 µM, HEp2: 5.2 µM, and KB cells: 4.8 µM) and remains nontoxic up to the concentration of 25 µM on normal Vero cells suggesting that cancerous cells are more susceptible to the prodigiosin at lower concentration. CONCLUSION: Maximum prodigiosin production was obtained with tannery fleshing. The potency of the fish gut bacterial secondary metabolite prodigiosin as a therapeutic agent was confirmed through in vitro antimicrobial and anticancer studies.

In situ generation of a hydroxyl radical by nanoporous activated carbon derived from rice husk for environmental applications: kinetic and thermodynamic constants.

The objective of this investigation is to evaluate the hydroxyl radical (˙OH) generation using nanoporous activated carbon (NPAC), derived from rice husk, and dissolved oxygen in water. The in situ production of the ˙OH radical was confirmed through the DMPO spin trapping method in EPR spectroscopy and quantitative determination by a deoxyribose assay procedure. NPAC served as a heterogeneous catalyst to degrade 2-deoxy-d-ribose (a reference compound) using hydroxyl radical generated from dissolved oxygen in water at temperatures in the range 313-373 K and pH 6, with first order rate constants (k = 9.2 × 10(-2) min(-1), k = 1.2 × 10(-1) min(-1), k = 1.3 × 10(-1) min(-1) and k = 1.68 × 10(-1) min(-1)). The thermodynamic constants for the generation of hydroxyl radicals by NPAC and dissolved oxygen in water were ΔG -1.36 kJ mol(-1) at 313 K, ΔH 17.73 kJ mol(-1) and ΔS 61.01 J mol(-1) K(-1).

Novel extremely acidic lipases produced from Bacillus species using oil substrates.

The extremely acidophilic microorganisms Bacillus pumilus and Bacillus subtilis were isolated from soil collected from the commercial edible oil and fish oil extraction industry. Optimization of conditions for acidic lipase production from B. pumilus and B. subtilis using palm oil and fish oil, respectively, was carried out using response surface methodology. The extremely acidic lipases, thermo-tolerant acidic lipase (TAL) and acidic lipase (AL), were produced by B. pumilus and B. subtilis, respectively. The optimum conditions for B. pumilus obtaining the maximum activity (1,100 U/mL) of TAL were fermentation time, 96 h; pH, 1; temperature, 50 °C; concentration of palm oil, 50 g/L. After purification, a 7.1-fold purity of lipase with specific activity of 5,173 U/mg protein was obtained. The molecular weight of the TAL was 55 kDa. The AL from B. subtilis activity was 214 U/mL at a fermentation time of 72 h; pH, 1; temperature, 35 °C; concentration of fish oil, 30 g/L; maltose concentration, 10 g/L. After purification, an 11.4-fold purity of lipase with specific activity of 2,189 U/mg protein was obtained. The molecular weight of the extremely acidic lipase was 22 kDa. The functional groups of lipases were determined by Fourier transform-infrared (FT-IR) spectroscopy.

Nutrient and enzymatic changes of hydrolysed tannery solid waste treated with epigeic earthworm Eudrilus eugeniae and phytotoxicity assessment on selected commercial crops.

Animal fleshing (ANFL) is the predominant proteinaceous solid waste generated during processing of leather and it is confronting disposal problems. The aim of this study was to assess the potential of epigeic earthworm Eudrilus eugeniae to utilize and transform the fermented ANFL in the solid state (SSF) and submerged state (SmF) into a value added product along a low residence period (25 days). A total of six treatment units containing different waste mixture compositions were established. Fifty healthy and non-clitellated earthworms were introduced in three different treatment containers: control, SSF, and SmF (+worm). Another set of treatment mixtures (control, SSF, SmF) was established without earthworms (-worm) to compare the results. The products were characterized for physico-chemical, enzymatic analysis and seedling growth parameters to compare the differences in the process with and without earthworms. The changes observed in the analytical parameters were in the following order: SSF > SmF > control mixtures (p < 0.05). The vermicompost showed a significant reduction in heavy metals, total organic carbon and an increase in total Kjeldhal nitrogen as compared to the product untreated by earthworms. The maximum enzymatic activities were observed after 21 days of vermicomposting. The relative seed germination of vermicompost extracts were in the order of tomato (Lycopersicon esculentum) > green gram (Vigna radiata) > cucumber (Cucumis sativus) > bottle gourd (Lagenaria siceraria (Mol.) Standl.) and showed no phytotoxicity effects. The results indicated that the combination of both ANFL hydrolysis through fermentation and vermicomposting is a good alternative to the management of this kind of waste.

Response surface modeling for optimization heterocatalytic Fenton oxidation of persistence organic pollution in high total dissolved solid containing wastewater.

The rice-husk-based mesoporous activated carbon (MAC) used in this study was precarbonized and activated using phosphoric acid. N2 adsorption/desorption isotherm, X-ray powder diffraction, electron spin resonance, X-ray photoelectron spectroscopy and scanning electron microscopy, transmission electron microscopy, (29)Si-NMR spectroscopy, and diffuse reflectance spectroscopy were used to characterize the MAC. The tannery wastewater carrying high total dissolved solids (TDS) discharged from leather industry lacks biodegradability despite the presence of dissolved protein. This paper demonstrates the application of free electron-rich MAC as heterogeneous catalyst along with Fenton reagent for the oxidation of persistence organic compounds in high TDS wastewater. The heterogeneous Fenton oxidation of the pretreated wastewater at optimum pH (3.5), H2O2 (4 mmol/L), FeSO4[Symbol: see text]7H2O (0.2 mmol/L), and time (4 h) removed chemical oxygen demand, biochemical oxygen demand, total organic carbon and dissolved protein by 86, 91, 83, and 90%, respectively.

Dietary inclusion of protease producing novel Pontibacter spp. and Bacillus megaterium as a probiotic enhances immune responses in Labeo rohita.

Abstract: This study stresses the key role which can be played by Tannery Fleshing (TF) hydrolyzing probiotic Pontibacter spp. in aqua feed formulation and identifies the probiotic strains in the fish gut capable of enhancing the overall growth and immune responses. Probiotics included are Pontibacter species (Pb) and Bacillus megaterium (BM) wherein Lactobacillus (LB) served as control. Experimental diets includes tannery fleshing (TF1), TF+LB strain (TF2), TF+BM strain (TF3), TF+Pb strain (TF4), Fishmeal+BM(TF5), Fishmeal+Pb and Control fish meal based diet (TF6). Compared with control, total weight gain (TWG), Specific Growth Rate (SGR), Feed Conversion Ratio (FCR) and Protein Efficiency Ratio (PER) in fish fed with diets supplemented with probiotics were significantly increased (p < 0.05). NBT, lysozyme activity, total protein and globulin content were highest in TF4 diet. After challenge with Aeromonas hydrophila, TF4 recorded highest survival and TF1 lowest survival in comparison with the control. Growth and related parameters reveals the effective utilization potential of tannery fleshing probiotic as a feed source. Comparative studies with standard fish meal diets reveals that the fish fed with Pontibacter spp. and Bacillus megaterium included feeds enhanced both assimilating capacity and immunological responses in Labeo rohita.

Lipase production from a novel thermo-tolerant and extreme acidophile Bacillus pumilus using palm oil as the substrate and treatment of palm oil-containing wastewater.

The thermo-tolerant and extreme acidophilic microorganism Bacillus pumilus was isolated from the soil collected from a commercial edible-oil extraction industry. Optimisation of conditions for the lipase production was conducted using response surface methodology. The optimum conditions for obtaining the maximum activity (1,100 U/mL) of extremely acidic thermostable lipase were fermentation time, 96 h; pH, 1; temperature, 50 °C; and concentration of palm oil, 50 g/L. After purification, a 7.1-fold purity of lipase with specific activity of 5,173 U/mg protein was obtained. The molecular weight of the thermo-tolerant acidophilic lipase (TAL) was 55 kDa. The predominant amino acid in the TAL was glycine. The functional groups of lipase were determined by Fourier transform infrared spectroscopy. TAL exhibited enhanced activity (114 %) with dimethyl sulphoxide (20 %, v/v), and it showed a moderate activity with methanol, hexane and benzene. The optimum conditions for the treatment of palm oil in wastewater using the TAL were found to be time, 3 h; pH, 1; temperature, 50 °C with pseudo second-order kinetic constant of 1.88 × 10(-3) L mol(-1) min(-1). The Michaelis-Menten enzyme kinetic model and the nonlinear kinetic model were evaluated for the TAL. TAL established hydrolysis efficiency of 96 % for palm oil in wastewater at 50 °C.

Electrochemical treatment of evaporated residue of soak liquor generated from leather industry.

The organic and suspended solids present in soak liquor, generated from leather industry, demands treatment. The soak liquor is being segregated and evaporated in solar evaporation pans/multiple effect evaporator due to non availability of viable technology for its treatment. The residue left behind in the pans/evaporator does not carry any reuse value and also faces disposal threat due to the presence of high concentration of sodium chloride, organic and bacterial impurities. In the present investigation, the aqueous evaporated residue of soak liquor (ERSL) was treated by electrochemical oxidation. Graphite/graphite and SS304/graphite systems were used in electrochemical oxidation of organics in ERSL. Among these, graphite/graphite system was found to be effective over SS304/graphite system. Hence, the optimised conditions for the electrochemical oxidation of organics in ERSL using graphite/graphite system was evaluated by response surface methodology (RSM). The mass transport coefficient (km) was calculated based on pseudo-first order rate kinetics for both the electrode systems (graphite/graphite and SS304/graphite). The thermodynamic properties illustrated the electrochemical oxidation was exothermic and non-spontaneous in nature. The calculated specific energy consumption at the optimum current density of 50 mA cm(-2) was 0.41 kWh m(-3) for the removal of COD and 2.57 kWh m(-3) for the removal of TKN.

Nano-silica fabricated with silver nanoparticles: antifouling adsorbent for efficient dye removal, effective water disinfection and biofouling control.

A nano-silica-AgNPs composite material is proposed as a novel antifouling adsorbent for cost-effective and ecofriendly water purification. Fabrication of well-dispersed AgNPs on the nano-silica surface, designated as NSAgNP, has been achieved through protein mediated reduction of silver ions at ambient temperature for development of sustainable nanotechnology. The coated proteins on AgNPs led to the formation of stable NSAgNP and protected the AgNPs from oxidation and other ions commonly present in water. The NSAgNP exhibited excellent dye adsorption capacity both in single and multicomponent systems, and demonstrated satisfactory tolerance against variations in pH and dye concentration. The adsorption mainly occurred through electrostatic interaction, though π-π interaction and pore diffusion also contributed to the process. Moreover, the NSAgNP showed long-term antibacterial activity against both planktonic cells and biofilms of Gram-negative Escherichia coli and Pseudomonas aeruginosa. The antibacterial activity of AgNPs retarded the initial attachment of bacteria on NSAgNP and thus significantly improved the antifouling properties of the nanomaterial, which further inhibited biofilm formation. Scanning electron and fluorescence microscopic studies revealed that cell death occurred due to irreversible damage of the cell membrane upon electrostatic interaction of positively charged NSAgNP with the negatively charged bacterial cell membrane. The high adsorption capacity, reusability, good tolerance, removal of multicomponent dyes and E. coli from the simulated contaminated water and antifouling properties of NSAgNP will provide new opportunities to develop cost-effective and ecofriendly water purification processes.