A quartz crystal microbalance (QCM)-based easy setup device for real-time mass change detection under high-power RF plasma.

Sensing technologies serve a crucial role in monitoring and testing surface properties in biosensors, thin films, and many other industries. Plasma treatments are routinely used in most of these technologies to modify the surfaces of materials. However, due to the high radio frequency (RF) noise in plasma processes, real-time surface tracking is still rather difficult. In this study, we aim to construct an easy-to-set up mass change detection system capable of operating under RF plasma conditions. For this purpose, we have presented a novel technique that utilizes the quartz crystal microbalance sensor to detect mass changes in different plasma environments. The constructed device was then tested under 13.56 MHz, 100 W plasma atmosphere. The results showed that the resonance frequency of a crystal was successfully measured with 1.0 Hz resolution under the impact of plasma-induced high power of RF noise. Moreover, as a preliminary study, we used ethylenediamine (EDA) to track changes in resonance frequency under plasma conditions and observed noise-free signals in frequency-voltage curves. Furthermore, the system's sensitivity was found to be 3.8 ng/Hz, with a test molecule (EDA) deposition of about 380 ng in the RF plasma atmosphere. Overall, this study focused on creating a relatively new approach for detecting the real-time mass change in a strong RF environment, which we believe could be an improved and easy-to-set up technique for plasma-based processes such as surface coating, etching, and activation.

Long-Term Evaluation of Ulnar Nerve Function in Patients with Distal Humerus Fractures Treated with Open Reduction and Internal Fixation: A Nerve Conduction Study.

OBJECTIVES: To investigate the long-term evaluation with electromyography of ulnar nerve function in patients with distal humerus fractures (DHFs) treated with open reduction and internal fixation. DESIGN: Retrospective cohort study. SETTING: Level 1 trauma center. PATIENTS: Fifty-two patients (20 men and 32 women) with DHFs. INTERVENTIONS: All patients underwent open reduction and internal fixation between 2002 and 2017 with a minimum five years' follow-up. MAIN OUTCOME MEASUREMENTS: The nerve conduction test was done for evaluation ulnar nerve function. Secondary outcomes were modified McGowan grading system for symptoms of ulnar neuropathy. RESULTS: The mean follow-up time was 112.7 ± 39 months after surgery. 28.8% (15) of the patients scored in Grade I, 30 (57.6%) in Grade II, and 7 (13.6%) in Grade III on the affected side according to McGowan grading scale. According to EMG results, 40.1% (21/52) of patients had abnormal results. There was significant difference between fracture and unaffected side regarding ulnar nerve motor wrist CMAP amplitude, motor below elbow CMAP amplitude, above elbow CMAP amplitude, above elbow MNCV, and sensory wrist amplitude. Ulnar nerve motor wrist-ADM latency (p = 0.01; r = 0.446) and ulnar nerve sensory conduction velocity (p < 0.001, r = -0.504) were significant correlation with McGowan grading scale. CONCLUSION: There were significant difference ulnar nerve motor amplitude and sensory wrist amplitude between fracture and unaffected side. A mean decrease in sensory amplitude of fracture elbow was found 25% compared to the unaffected side in our result. LEVEL OF EVIDENCE: Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

Gender and degree of tendon healing are independent predictive factors for clinical outcome in successfully healed rotator cuff tears.

PURPOSE: Arthroscopic rotator cuff repair (aRCR) is a commonly performed procedure and has been reported to be a successful treatment. Successful healing has traditionally been considered to be associated with good outcome; however, knowledge on predictive factors affecting final outcome other than tendon healing is limited. This study aims to investigate predictive factors influencing clinical outcome following aRCR in patients with successfully healed tears. METHODS: This retrospective case-control study was conducted in a single center with 135 patients who had successfully healed tendons based on Sugaya classification (grades I-III) on postoperative magnetic resonance imaging (MRI) scans following aRCR. Clinical outcome measures included Constant-Murley score (CMS), range of motion (ROM), pain score. Various preoperative, intraoperative factors and degree of postoperative tendon healing were assessed to identify independent predictive factors for final clinical outcome. RESULTS: Mean age of patients was 55.9 ± 9.0 years and mean follow-up duration was 46.8 ± 14.9 months. There were 50 (37%) male and 85 (63.0%) female patients. At final follow-up, mean CMS was 85.7 ± 12.0. Considering mean postoperative CMS and the minimal clinically important difference (MCID) of 10 points for CMS, a cutoff level of 75 points for CMS was set (85-10 = 75) and study population was divided into two study groups (group I, poor outcome, CMS ≤ ;75, and group II, good outcome, CMS > 75). There were 24 (17.8%) patients in group I and 111 (82.2%) patients in group II. Univariate analysis revealed that gender, body mass index (BMI) and degree of tendon healing (Sugaya classification) differed significantly between two groups (p < 0.05). Multivariate logistic regression analysis which was conducted with these variables showed that female gender (odds ratio 3.65) and Sugaya grade III (odds ratio 8.19) were independent predictive factors which were significantly associated with poor outcome (p < 0.05). CONCLUSIONS: This study showed that despite achieving a successful healing, considerable amount of patients (17.8%) have ended up with poor outcome. Female gender and degree of tendon healing were identified as independent predictive factors for poor outcome. These data would help surgeons during decision-making, risk assessment and patient counseling. LEVEL OF EVIDENCE: III.

Fabrication of curcumin-loaded magnetic PEGylated-PLGA nanocarriers tagged with GRGDS peptide for improving anticancer activity.

Carrier-mediated drug delivery systems are highly promising as a treatment option for the targeted delivery of potent cytotoxic drugs with increased efficacy and safety. Considering that poly (lactic-co-glycolic acid) (PLGA) and polyethylene glycol (PEG) polymers each provide certain advantages for biological purposes, PEGylated-PLGA nanoparticles have emerged as a leading candidate among other alternatives. Furthermore, these nanoparticles can be modified with the specific short peptide sequences such as glycine-arginine-glycine-aspartic acid­serine (GRGDS), which selectively binds to integrins overexpressed in most cancer cells, allowing for targeted delivery. Here, we reported the details in fabrication and characterization of magnetic PEGylated-PLGA nanoparticles functionalized with GRGDS peptide. In addition, superparamagnetic iron oxide nanoparticles (SPIONs) and the natural pharmaceutical compound curcumin (Cur) were loaded into these polymeric nanoparticles to assess their anticancer activity potential. Overall, this study provides comprehensive methodologies, including all synthesis procedures, challenges, and useful suggestions for peptide-conjugated polymeric nanoparticles that may be used for cellular targeting and therapeutic applications.•Step by step fabrication protocol for the Cur loaded magnetic PEGylated-PLGA nanoparticles was presented.•Validation of the fabrication and the GRGDS conjugation to the nanoparticles were shown via detailed characterization studies.•The cytotoxic effect of the Cur-loaded and GRGDS-tagged magnetic nanoparticles was tested on T98G glioblastoma cell line as a preliminary in vitro study.

Effects of radiofrequency exposure on in vitro blood-brain barrier permeability in the presence of magnetic nanoparticles.

The blood-brain barrier (BBB) remains a major obstacle for the delivery of drugs in the treatment of many neurological diseases. In this study, we aimed to investigate the effects of radiofrequency electromagnetic fields (RF-EMFs) on the permeability of an in vitro BBB model under RF exposure alone, or in the presence of nanoparticles (NPs). For this purpose, an in vitro BBB model was established by seeding human umbilical vein endothelial cells (HUVECs) and human glioblastoma cell line (T98G) on the apical and basolateral sides of the transwell membrane, respectively. The integrity of the BBB model was confirmed by measuring transendothelial electrical resistance (TEER), and a fluorescein isothiocyanate (FITC)-dextran permeability assay was performed when the resistance reached 120 Ω cm2. After the RF-field exposure (13.56 MHz, 80 W, 10 min), we found that FITC-dextran transported across the in vitro BBB was increased 10-fold compared to FITC-dextran transported without an RF-field. This notable phenomenon, which can be called the burst permeability RF effect (BP-RF), has been proposed for the first time in the literature. Subsequently, the effect of the RF-field on BBB permeability was also investigated in the presence of superparamagnetic iron oxide nanoparticles (SPIONs) and magnetic poly(lactic-co-glycolic acid)-polyethylene glycol (PLGA-b-PEG) nanoparticles (m-PNPs). It was found that the amount of both transported NPs on the basolateral sides increased after exposure to the RF-field. As a result, the RF-field can be applied simultaneously during treatment with clinical agents or nanocarriers, improving the permeability of the BBB, which may contribute to therapeutic efficacy of many drugs that are used in neurological diseases.

Repair Integrity and Functional Outcomes Between Knot-Tying and Knotless Suture-Bridge Arthroscopic Rotator Cuff Repair: A Prospective Randomized Clinical Trial.

BACKGROUND: Knot-tying suture-bridge (SB) rotator cuff repair may compromise the vascularity of the repaired tendon, causing tendon strangulation and medial repair failure. The knotless SB repair technique has been proposed to overcome this possibility and decrease retear rates. PURPOSE: To compare clinical and structural outcomes and retear patterns between the knot-tying and knotless SB techniques. We hypothesized that the knotless technique would result in lower retear rates owing to the preservation of intratendinous vascularity. STUDY DESIGN: Randomized controlled trial; Level of evidence, 1. METHODS: A total of 104 patients with full-thickness rotator cuff tears were randomly and prospectively allocated to undergo knot-tying (group 1) or knotless (group 2) SB repair. Clinical outcome measures included range of motion, the visual analog scale (VAS) for pain, and the Constant score for function. Repair integrity was evaluated on magnetic resonance imaging scans using the Sugaya classification. Retears were also classified according to their pattern as type 1 (lateral) or type 2 (medial). RESULTS: Overall, 88 patients (group 1: n = 42 [mean ± SD age, 54.3 ± 9.8 years]; group 2: n = 46 [mean ± SD age, 55.8 ± 8.2 years]) were included in the final analysis. The mean ± SD follow-up period was 25.4 ± 8.3 and 23.3 ± 7.2 months for groups 1 and 2, respectively. From preoperatively to postoperatively, the mean VAS pain score improved significantly in both groups (group 1: from 7.4 ± 1.7 to 1.0 ± 1.7; group 2: from 7.1 ± 1.9 to 1.3 ± 2.0; P < .0001 for both), as did the mean ± SD Constant score (group 1: from 51.7 ± 13.4 to 86.0 ± 11.5; group 2: from 49.4 ± 18.4 to 87.2 ± 14.8; P < .0001 for both). There was no significant difference between the groups for the postoperative VAS or Constant score. The retear rate was not significantly different between the groups (19.0% [8/42] in group 1 and 28.3% [13/46] in group 2; P > .05). There was a significant difference in the type 2 failure rate (75.0% [6/8] in group 1 and 23.1% [3/13] in group 2; P = .03). CONCLUSION: Both techniques showed excellent improvement and comparable clinical outcomes, and there was no significant difference in retear rates. Consistent with previously published data, the type 2 failure rate was significantly higher with the knot-tying technique. REGISTRATION: NCT03982108 (ClinicalTrials.gov identifier).

Long-term comparative study of internal fixation with Kirschner wires or cannulated screws for displaced medial epicondyle fractures of the humerus in children: A 10-year follow-up of 42 cases.

BACKGROUND: The rationale behind the decision-making on which type of fixation to use in displaced medial epicondyle fractures is not well elucidated. This study aims to compare the long-term clinical and radiographic outcomes of internal fixation with either Kirschner wires (K-wires) or cannulated screws in children with displaced medial epicondyle fractures. METHODS: In this study, 42 consecutive children who underwent surgical treatment for medial epicondyle fractures displaced more than 5 mm were categorized into two groups as follows: group A, 22 children undergoing fixation with K-wires and group B, 20 children undergoing fixation with a screw. The mean age was nine (median, 10.5; range, 6-14) years in group A and 15 (16, 10-17) in group B. The overall follow-up was 10 (median, 10; range, 5-15) years. To assess patients' clinical outcomes, the Mayo Elbow Performance Scores (MEPS) were used in addition to the elbow range of motion (ROM) at the last follow-up. During the radiographic assessment, possible deformities secondary to the epicondyle fracture were examined on final follow-up radiographs. RESULTS: The main MEPS were 95 (median, 95; range, 85-100) and 93 (94, 85-100) in groups A and B, respectively (p=0.18). In ROM, no significant differences were observed (p=0.43). In the radiographic assessment, one patient from each group developed a fibrous union, and one from each group had hypoplasia. There was no significant relationship between the deformity and fixation type (p=0.34, χ2 test). CONCLUSION: Two smooth K-wires for younger children and screw fixation for children near skeletal maturity may provide favorable clinical and radiological outcomes at long-term follow-up, with low morbidity and radiographic deformity.