The continuous growth in data volume has sparked interest in silicon-organic-hybrid (SOH) nanophotonic devices integrated into silicon photonic integrated circuits (PICs). SOH devices offer improved speed and energy efficiency compared to silicon photonics devices. However, a comprehensive and accurate modeling methodology of SOH devices, such as modulators corroborating experimental results, is lacking. While some preliminary modeling approaches for SOH devices exist, their reliance on theoretical and numerical methodologies, along with a lack of compatibility with electronic design automation (EDA), hinders their seamless and rapid integration with silicon PICs. Here, we develop a phenomenological, building-block-based SOH PICs simulation methodology that spans from the physics to the system level, offering high accuracy, comprehensiveness, and EDA-style compatibility. Our model is also readily integrable and scalable, lending itself to the design of large-scale silicon PICs. Our proposed modeling methodology is agnostic and compatible with any photonics-electronics co-simulation software. We validate this methodology by comparing the characteristics of experimentally demonstrated SOH microring modulators (MRMs) and Mach Zehnder modulators with those obtained through simulation, demonstrating its ability to model various modulator topologies. We also show our methodology's ease and speed in modeling large-scale systems. As an illustrative example, we use our methodology to design and study a 3-channel SOH MRM-based wavelength-division (de)multiplexer, a widely used component in various applications, including neuromorphic computing, data center interconnects, communications, sensing, and switching networks. Our modeling approach is also compatible with other materials exhibiting the Pockels and Kerr effects. To our knowledge, this represents the first comprehensive physics-to-system-level EDA-compatible simulation methodology for SOH modulators.
Radio-frequency interference is a growing concern as wireless technology advances, with potentially life-threatening consequences like interference between radar altimeters and 5 G cellular networks. Mobile transceivers mix signals with varying ratios over time, posing challenges for conventional digital signal processing (DSP) due to its high latency. These challenges will worsen as future wireless technologies adopt higher carrier frequencies and data rates. However, conventional DSPs, already on the brink of their clock frequency limit, are expected to offer only marginal speed advancements. This paper introduces a photonic processor to address dynamic interference through blind source separation (BSS). Our system-on-chip processor employs a fully integrated photonic signal pathway in the analogue domain, enabling rapid demixing of received mixtures and recovering the signal-of-interest in under 15 picoseconds. This reduction in latency surpasses electronic counterparts by more than three orders of magnitude. To complement the photonic processor, electronic peripherals based on field-programmable gate array (FPGA) assess the effectiveness of demixing and continuously update demixing weights at a rate of up to 305 Hz. This compact setup features precise dithering weight control, impedance-controlled circuit board and optical fibre packaging, suitable for handheld and mobile scenarios. We experimentally demonstrate the processor's ability to suppress transmission errors and maintain signal-to-noise ratios in two scenarios, radar altimeters and mobile communications. This work pioneers the real-time adaptability of integrated silicon photonics, enabling online learning and weight adjustments, and showcasing practical operational applications for photonic processing.
Silicon photonics has developed into a mainstream technology driven by advances in optical communications. The current generation has led to a proliferation of integrated photonic devices from thousands to millions-mainly in the form of communication transceivers for data centers. Products in many exciting applications, such as sensing and computing, are around the corner. What will it take to increase the proliferation of silicon photonics from millions to billions of units shipped? What will the next generation of silicon photonics look like? What are the common threads in the integration and fabrication bottlenecks that silicon photonic applications face, and which emerging technologies can solve them? This perspective article is an attempt to answer such questions. We chart the generational trends in silicon photonics technology, drawing parallels from the generational definitions of CMOS technology. We identify the crucial challenges that must be solved to make giant strides in CMOS-foundry-compatible devices, circuits, integration, and packaging. We identify challenges critical to the next generation of systems and applications-in communication, signal processing, and sensing. By identifying and summarizing such challenges and opportunities, we aim to stimulate further research on devices, circuits, and systems for the silicon photonics ecosystem.
mmWave devices can broadcast multiple spatially-separated data streams simultaneously in order to increase data transfer rates. Data transfer can, however, be compromised by interference. Photonic blind interference cancellation systems offer a power-efficient means of mitigating interference, but previous demonstrations of such systems have been limited by high latencies and the need for regular calibration. Here, we demonstrate real-time photonic blind interference cancellation using an FPGA-photonic system executing a zero-calibration control algorithm. Our system offers a greater than 200-fold reduction in latency compared to previous work, enabling sub-second cancellation weight identification. We further investigate key trade-offs between system latency, power consumption, and success rate, and we validate sub-Nyquist sampling for blind interference cancellation. We estimate that photonic interference cancellation can reduce the power required for digitization and signal recovery by greater than 74 times compared to the digital electronic alternative.
Convolutions are one of the most critical signal and image processing operations. From spectral analysis to computer vision, convolutional filtering is often related to spatial information processing involving neighbourhood operations. As convolution operations are based around the product of two functions, vectors or matrices, dot products play a key role in the performance of such operations; for example, advanced image processing techniques require fast, dense matrix multiplications that typically take more than 90% of the computational capacity dedicated to solving convolutional neural networks. Silicon photonics has been demonstrated to be an ideal candidate to accelerate information processing involving parallel matrix multiplications. In this work, we experimentally demonstrate a multiwavelength approach with fully integrated modulators, tunable filters as microring resonator weight banks, and a balanced detector to perform matrix multiplications for image convolution operations. We develop a scattering matrix model that matches the experiment to simulate large-scale versions of these photonic systems with which we predict performance and physical constraints, including inter-channel cross-talk and bit resolution.
Emerging neuromorphic hardware promises to solve certain problems faster and with higher energy efficiency than traditional computing by using physical processes that take place at the device level as the computational primitives in neural networks. While initial results in photonic neuromorphic hardware are very promising, such hardware requires programming or "training" that is often power-hungry and time-consuming. In this article, we examine the online learning paradigm, where the machinery for training is built deeply into the hardware itself. We argue that some form of online learning will be necessary if photonic neuromorphic hardware is to achieve its true potential.
The expansion of telecommunications incurs increasingly severe crosstalk and interference, and a physical layer cognitive method, called blind source separation (BSS), can effectively address these issues. BSS requires minimal prior knowledge to recover signals from their mixtures, agnostic to the carrier frequency, signal format, and channel conditions. However, previous electronic implementations did not fulfil this versatility due to the inherently narrow bandwidth of radio-frequency (RF) components, the high energy consumption of digital signal processors (DSP), and their shared weaknesses of low scalability. Here, we report a photonic BSS approach that inherits the advantages of optical devices and fully fulfils its "blindness" aspect. Using a microring weight bank integrated on a photonic chip, we demonstrate energy-efficient, wavelength-division multiplexing (WDM) scalable BSS across 19.2 GHz processing bandwidth. Our system also has a high (9-bit) resolution for signal demixing thanks to a recently developed dithering control method, resulting in higher signal-to-interference ratios (SIR) even for ill-conditioned mixtures.
We propose a photonic processing unit for high-density analog computation using intensity-modulation-based microring modulators (IM-MRMs). The output signal at the fixed resonance wavelength is directly intensity modulated by changing the extinction ratio (ER) of the IM-MRM . Thanks to the intensity-modulated approach, the proposed photonic processing unit is less sensitive to the inter-channel crosstalk. Simulation results reveal that the proposed design offers a maximum of 17-fold increase in wavelength channel density compared to its wavelength-modulated counterpart. Therefore, a photonic tensor core of size 512 [Formula: see text] 512 can be realized by current foundry lines. A convolutional neural network (CNN) simulator with 6-bit precision is built for handwritten digit recognition task using the proposed modulator. Simulation results show an overall accuracy of 96.76%, when the wavelength channel spacing suffers a 3-dB power penalty. To experimentally validate the system, 1000 dot product operations are carried out with a 4-bit signed system on a co-packaged photonic chip, where optical and electrical I/Os are realized using photonic and electrical wire bonding techniques. Study of the measurement results show a mean squared error (MSE) of 3.09[Formula: see text]10[Formula: see text] for dot product calculations. The proposed IM-MRM, therefore, renders the crosstalk issue tractable and provides a solution for the development of large-scale optical information processing systems with multiple wavelengths.
Optical Devices , Cognition , Computer Simulation , Cross Reactions , Electricity
A mechanism for self-pulsation in a proposed graphene-on-silicon microring device is studied. The relevant nonlinear effects of two photon absorption, Kerr effect, saturable absorption, free carrier absorption, and dispersion are included in a coupled mode theory framework. We look at the electrical tunability of absorption and the Kerr effect in graphene. We show that the microring can switch from a stable rest state to a self-pulsation state by electrically tuning the graphene under constant illumination. This switching is indicative of a supercritical Hopf bifurcation since the frequency of the pulses is approximately constant at 7 GHz and the amplitudes initial grow with increasing Fermi level. The CMOS compatibility of graphene and the opto-electronic mechanism allows this to device to be fairly easily integrated with other silicon photonic devices.
Recent progress in artificial intelligence is largely attributed to the rapid development of machine learning, especially in the algorithm and neural network models. However, it is the performance of the hardware, in particular the energy efficiency of a computing system that sets the fundamental limit of the capability of machine learning. Data-centric computing requires a revolution in hardware systems, since traditional digital computers based on transistors and the von Neumann architecture were not purposely designed for neuromorphic computing. A hardware platform based on emerging devices and new architecture is the hope for future computing with dramatically improved throughput and energy efficiency. Building such a system, nevertheless, faces a number of challenges, ranging from materials selection, device optimization, circuit fabrication and system integration, to name a few. The aim of this Roadmap is to present a snapshot of emerging hardware technologies that are potentially beneficial for machine learning, providing the Nanotechnology readers with a perspective of challenges and opportunities in this burgeoning field.
Microwave communications have witnessed an incipient proliferation of multi-antenna and opportunistic technologies in the wake of an ever-growing demand for spectrum resources, while facing increasingly difficult network management over widespread channel interference and heterogeneous wireless broadcasting. Radio frequency (RF) blind source separation (BSS) is a powerful technique for demixing mixtures of unknown signals with minimal assumptions, but relies on frequency dependent RF electronics and prior knowledge of the target frequency band. We propose photonic BSS with unparalleled frequency agility supported by the tremendous bandwidths of photonic channels and devices. Specifically, our approach adopts an RF photonic front-end to process RF signals at various frequency bands within the same array of integrated microring resonators, and implements a novel two-step photonic BSS pipeline to reconstruct source identities from the reduced dimensional statistics of front-end output. We verify the feasibility and robustness of our approach by performing the first proof-of-concept photonic BSS experiments on mixed-over-the-air RF signals across multiple frequency bands. The proposed technique lays the groundwork for further research in interference cancellation, radio communications, and photonic information processing.
Independent component analysis (ICA) is a general-purpose technique for analyzing multi-dimensional data to reveal the underlying hidden factors that are maximally independent from each other. We report the first photonic ICA on mixtures of unknown signals by employing an on-chip microring (MRR) weight bank. The MRR weight bank performs so-called weighted addition (i.e., multiply-accumulate) operations on the received mixtures, and outputs a single reduced-dimensional representation of the signal of interest. We propose a novel ICA algorithm to recover independent components solely based on the statistical information of the weighted addition output, while remaining blind to not only the original sources but also the waveform information of the mixtures. We investigate both channel separability and near-far problems, and our two-channel photonic ICA experiment demonstrates our scheme holds comparable performance with the conventional software-based ICA method. Our numerical simulation validates the fidelity of the proposed approach, and studies noise effects to identify the operating regime of our method. The proposed technique could open new domains for future research in blind source separation, microwave photonics, and on-chip information processing.
Photonic principal component analysis (PCA) enables high-performance dimensionality reduction in wideband analog systems. In this paper, we report a photonic PCA approach using an on-chip microring (MRR) weight bank to perform weighted addition operations on correlated wavelength-division multiplexed (WDM) inputs. We are able to configure the MRR weight bank with record-high accuracy and precision, and generate multi-channel correlated input signals in a controllable manner. We also consider the realistic scenario in which the PCA procedure remains blind to the waveforms of both the input signals and weighted addition output, and propose a novel PCA algorithm that is able to extract principal components (PCs) solely based on the statistical information of the weighted addition output. Our experimental demonstration of two-channel photonic PCA produces PCs holding consistently high correspondence to those computed by a conventional software-based PCA method. Our numerical simulation further validates that our scheme can be generalized to high-dimensional (up to but not limited to eight-channel) PCA with good convergence. The proposed technique could bring new solutions to problems in microwave communications, ultrafast control, and on-chip information processing.
Photonic neural networks benefit from both the high-channel capacity and the wave nature of light acting as an effective weighting mechanism through linear optics. Incorporating a nonlinear activation function by using active integrated photonic components allows neural networks with multiple layers to be built monolithically, eliminating the need for energy and latency costs due to external conversion. Interferometer-based modulators, while popular in communications, have been shown to require more area than absorption-based modulators, resulting in a reduced neural network density. Here, we develop a model for absorption modulators in an electro-optic fully connected neural network, including noise, and compare the network's performance with the activation functions produced intrinsically by five types of absorption modulators. Our results show the quantum well absorption modulator-based electro-optic neuron has the best performance allowing for 96% prediction accuracy with 1.7×10-12 J/MAC excluding laser power when performing MNIST classification in a 2 hidden layer feed-forward photonic neural network.
Microring weight banks present novel opportunities for reconfigurable, high-performance analog signal processing in photonics. Controlling microring filter response is a challenge due to fabrication variations and thermal sensitivity. Prior work showed continuous weight control of multiple wavelength-division multiplexed signals in a bank of microrings based on calibration and feedforward control. Other prior work has shown resonance locking based on feedback control by monitoring photoabsorption-induced changes in resistance across in-ring photoconductive heaters. In this work, we demonstrate continuous, multi-channel control of a microring weight bank with an effective 5.1 bits of accuracy on 2Gbps signals. Unlike resonance locking, the approach relies on an estimate of filter transmission versus photo-induced resistance changes. We introduce an estimate still capable of providing 4.2 bits of accuracy without any direct transmission measurements. Furthermore, we present a detailed characterization of this response for different values of carrier wavelength offset and power. Feedback weight control renders tractable the weight control problem in reconfigurable analog photonic networks.
Neocortical systems encode information in electrochemical spike timings, not just mean firing rates. Learning and memory in networks of spiking neurons is achieved by the precise timing of action potentials that induces synaptic strengthening (with excitation) or weakening (with inhibition). Inhibition should be incorporated into brain-inspired spike processing in the optical domain to enhance its information-processing capability. We demonstrate the simultaneous excitatory and inhibitory dynamics in an excitable (i.e., a pulsed) laser neuron, both numerically and experimentally. We investigate the bias strength effect, inhibitory strength effect, and excitatory and inhibitory input timing effect, based on the simulation platform of an integrated graphene excitable laser. We further corroborate these analyses with proof-of-principle experiments utilizing a fiber-based graphene excitable laser, where we introduce inhibition by directly modulating the gain of the laser. This technology may potentially open novel spike-processing functionality for future neuromorphic photonic systems.
Electrophysiological Phenomena/radiation effects , Lasers , Models, Neurological , Neocortex/cytology , Neocortex/physiology , Neocortex/radiation effects , Neurons/cytology , Neurons/radiation effects , Time Factors
Weighted addition is an elemental multi-input to single-output operation that can be implemented with high-performance photonic devices. Microring (MRR) weight banks bring programmable weighted addition to silicon photonics. Prior work showed that their channel limits are affected by coherent inter-channel effects that occur uniquely in weight banks. We fabricate two-pole designs that exploit this inter-channel interference in a way that is robust to dynamic tuning and fabrication variation. Scaling analysis predicts a channel count improvement of 3.4-fold, which is substantially greater than predicted by incoherent analysis used in conventional MRR devices. Advances in weight bank design expand the potential of reconfigurable analog photonic networks and multivariate microwave photonics.
Photonic systems for high-performance information processing have attracted renewed interest. Neuromorphic silicon photonics has the potential to integrate processing functions that vastly exceed the capabilities of electronics. We report first observations of a recurrent silicon photonic neural network, in which connections are configured by microring weight banks. A mathematical isomorphism between the silicon photonic circuit and a continuous neural network model is demonstrated through dynamical bifurcation analysis. Exploiting this isomorphism, a simulated 24-node silicon photonic neural network is programmed using "neural compiler" to solve a differential system emulation task. A 294-fold acceleration against a conventional benchmark is predicted. We also propose and derive power consumption analysis for modulator-class neurons that, as opposed to laser-class neurons, are compatible with silicon photonic platforms. At increased scale, Neuromorphic silicon photonics could access new regimes of ultrafast information processing for radio, control, and scientific computing.
Dual-band fiber lasers are emerging as a promising technology to penetrate new industrial and medical applications from their dual-band properties, in addition to providing compactness and environmental robustness from the waveguide structure. Here, we demonstrate the use of a common graphene saturable absorber and a single gain medium (Tm3+:ZBLAN fiber) to implement (1) a dual-band fiber ring laser with synchronized Q-switched pulses at wavelengths of 1480 nm and 1840 nm, and (2) a dual-band fiber linear laser with synchronized mode-locked pulses at wavelengths of 1480 nm and 1845 nm. Q-switched operation at 1480 nm and 1840 nm is achieved with a synchronized repetition rate from 20 kHz to 40.5 kHz. For synchronous mode-locked operation, pulses with full-width at half maximum durations of 610 fs and 1.68 ps at wavelengths of 1480 nm and 1845 nm, respectively, are obtained at a repetition rate of 12.3 MHz. These dual-band pulsed sources with an ultra-broadband wavelength separation of ~360 nm will add new capabilities in applications including optical sensing, spectroscopy, and communications.
We demonstrate 4-channel, 2GHz weighted addition in a silicon microring filter bank. Accurate analog weight control becomes more difficult with increasing number of channels, N, as feedback approaches become impractical and brute force feedforward approaches take O(2N) calibration measurements in the presence of inter-channel dependence. We introduce model-based calibration techniques for thermal cross-talk and cross-gain saturation, which result in a scalable O(N) calibration routine and 3.8 bit feedforward weight accuracy on every channel. Practical calibration routines are indispensible for controlling large-scale microring systems. The effect of thermal model complexity on accuracy is discussed. Weighted addition based on silicon microrings can apply the strengths of photonic manufacturing, wideband information processing, and multiwavelength networks towards new paradigms of ultrafast analog distributed processing.
