Identification of Xuanfei Baidu granule constituents by liquid chromatography-quadruple-time-of-flight-mass spectrometry and its anti-inflammatory active constituents using a lipopolysaccharide-induced RAW264.7 cell model.

The Xuanfei Baidu (XFBD) prescription, a traditional Chinese medicine prescription, has demonstrated significant anti-inflammatory activities; however, the number of its reported constituents is limited, and its anti-inflammatory constituents are unclear. In this study, the constituents of XFBD granule, a granule dosage of XFBD prescription, were thoroughly examined in vitro and in vivo using liquid chromatography-quadruple-time-of-flight-mass spectrometry, and the anti-inflammatory constituents were screened. A total of 214 constituents were identified from the XFBD granule, 62 of which were confirmed via comparison with reference standards. After intragastric administration of XFBD granule, 63 and 28 constituents were absorbed into the rat sera and lungs in prototype form, respectively. XFBD granule and XFBD-containing serum were found to significantly reduce nitric oxide (NO) and interleukin-6 (IL-6) secretion in lipopolysaccharide-induced RAW264.7 cells. Five anti-inflammatory constituents (verbasoside, scutellarin, luteolin, apigenin, and pogostone) were found to reduce the concentration of NO and IL-6 in a dose-dependent manner. Moreover, the combination of these five constituents could significantly reduce NO secretion even when the concentration of each constituent was two to three orders of magnitude lower than their individual minimum effective concentrations. Overall, this study provides a valuable reference for the discovery of effective constituents from the XFBD granule.

Ratiometric SERS quantification of SO2 vapor based on Au@Ag-Au with Raman reporter as internal standard.

Practical gas sensing application requires sensors to quantify target analytes with high sensitivity and reproducibility. However, conventional surface enhanced Raman scattering (SERS) sensor lacks reproducibility and quantification arising from variations of "hot spot" distribution and measurement conditions. Here, a ratio-dependent SERS sensor was developed for quantitative label-free gas sensing. Au@Ag-Au nanoparticles (NPs) were filtered onto anodic aluminum oxide (AAO) forming Au@Ag-Au@AAO SERS substrate. 4-MBA was encapsulated in the gap of Au@Ag-Au and served as the internal standard (IS) to calibrate SERS signal fluctuation for improved quantification ability. Combined with headspace sampling method, SO2 residue in traditional Chinese medicine (TCM) can be extracted and captured on the immediate vicinity of Au@Ag-Au surface. The intensity ratio I613 cm-1/I1078 cm-1 showed excellent linearity within the range of 0.5 mg/kg-500 mg/kg, demonstrating superior quantification performance for SO2 detection. Signals for concentration as low as 0.05 mg/kg of SO2 could be effectively collected, much lower than the strictest limit 10 mg/kg in Chinese Pharmacopoeia. Combined with a handheld Raman spectrometer, handy and quantitative TCM quality evaluation in aspect of SO2 residue was realized. This ratiometric SERS sensor functioned well in rapid on-site SO2 quantification, exhibiting excellent sensitivity and simple operability.

Effective constituents and protective effect of Mudan granules against Schwann cell injury.

ETHNOPHARMACOLOGICAL RELEVANCE: Diabetic peripheral neuropathy (DPN) is the most common complication of diabetes. Mudan granules (MD) is a Chinese patent medicine for treating DPN, which is composed of nine Chinese medicinal herbs, including the radix of Astragalus membranaceus (Fisch.) Bge. var. mongholicus (Bge.) Hsiao or Astragalus membranaceus (Fisch.) Bge. (Huangqi in Chinese), rhizome of Corydalis yanhusuo W.T. Wang (Yanhusuo), radix and rhizome of Panax notoginseng (Burk.) F. H. Chen (Sanqi), radix of Paeonia lactiflora Pall. or Paeonia veitchii Lynch (Chishao), radix and rhizome of Salvia miltiorrhiza Bge. (Danshen), rhizome of Ligusticum chuanxiong Hort. (Chuanxiong), flowers of Carthamus tinctorius L. (Honghua), lignum of Caesalpinia sappan L. (Sumu), and caulis of Spatholobus suberectus Dunn (Jixueteng). MD was reported to have a protective effect on Schwann cell (SC) that is considered as an important therapeutic target of DPN. However, the constituents of MD have not been reported, and the effective constituents and protective pathways for MD against SC injury remain unclear. AIM OF THE STUDY: This study aimed to identify the constituents in MD, and to investigate the effective constituents and protective pathways of MD against high-glucose/lipid injury in SC. MATERIALS AND METHODS: The chemical constituents of MD were identified using ultra-performance liquid chromatography-quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS). Protective effect and effective constituents screening were performed in an in vitro SC injury model induced by high glucose and lipid levels. The protective pathways of MD and its effective constituents were investigated by western blotting assay of related proteins. RESULTS: A total of 136 constituents were identified in MD. MD downregulated the phosphorylation of extracellular-regulated protein kinases 1/2 (ERK1/2) and expression of cyclooxygenase-2 (COX-2) and upregulated the expression of sirtuin 2 (SIRT2). Seven effective constituents were screened out, including three from Sanqi [20(R)-ginsenoside Rh2, 20(S)-ginsenoside Rh2, and ginsenoside Rk3], one from Huangqi (astragaloside II), one from Danshen (danshensu), and two from Chuanxiong (chlorogenic and cryptochlorogenic acid). Six of the seven compounds, excluding danshensu, inhibited the phosphorylation of ERK1/2. Both astragaloside II and chlorogenic acid upregulated the expression of SIRT2, and cryptochlorogenic acid and danshensu downregulated the expression of COX-2. CONCLUSIONS: The constituents of MD were firstly identified, and seven effective constituents were found. MD can protect SC against high-glucose and -lipid injury by downregulating ERK1/2 phosphorylation and COX-2 expression and upregulating SIRT2 expression. Seven effective constituents regulated the expression of these proteins. This study presented an important advance toward elucidating the chemical constituents, and the effective constituents and protective pathways of MD against high-glucose/lipid injury in SC, which is very helpful for investigating the action mechanism of MD on treating DPN, and could ultimately inform the development of effective quality control procedures for MD production.

Sulfated Chitosan Nanofibrous Scaffolds Seeded With Adipose Stem Cells Promote Ischemic Wound Healing in a Proangiogenic Strategy.

Ischemic wounds are chronic wounds with poor blood supply that delays wound reconstruction. To accelerate wound healing and promote angiogenesis, adipose-derived stem cells (ADSCs) are ideal seed cells for stem cell-based therapies. Nevertheless, providing a favorable environment for cell proliferation and metabolism poses a substantial challenge. A highly sulfated heparin-like polysaccharide 2-N, 6-O-sulfated chitosan (26SCS)-doped poly(lactic-co-glycolic acid) scaffold (S-PLGA) can be used due to their biocompatibility, mechanical properties, and coagent 26SCS high affinity for growth factors. In this study, a nano-scaffold system, constructed from ADSCs seeded on electrospun fibers of modified PLGA, was designed to promote ischemic wound healing. The S-PLGA nanofiber membrane loaded with adipose stem cells ADSCs@S-PLGA was prepared by a co-culture in vitro, and the adhesion and compatibility of cells on the nano-scaffolds were explored. Scanning electron microscopy was used to observe the growth state and morphological changes of ADSCs after co-culture with PLGA electrospun fibers. The proliferation and apoptosis after co-culture were detected using a Cell Counting Kit-8 kit and flow cytometry, respectively. An ischemic wound model was then established, and we further studied the ability of ADSCs@S-PLGA to promote wound healing and angiogenesis. We successfully established ischemic wounds on the backs of rats and demonstrated that electrospun fibers combined with the biological effects of adipose stem cells effectively promoted wound healing and the growth of microvessels around the ischemic wounds. Phased research results can provide a theoretical and experimental basis for a new method for promoting clinical ischemic wound healing.

[In vitro biological evaluation of PEGylated poly(glycerol sebacate)/ß-TCP-coating modified magnesium alloy].

PURPOSE: To prepare PEGS/ß-TCP modified magnesium alloy (PEGS/ß-TCP/MZG) membranes by forming a glycolated poly(sebacate)/ß-tricalcium phosphate (PEGS/ß-TCP) coating on the surface of magnesium-zinc-gadolinium alloy (MZG) membranes, and to evaluate the osteogenic induction activity and immunomodulatory properties of PEGS/ß-TCP/MZG using the material extract medium. METHODS: PEGS/ß-TCP coating was prepared on the surface of MZG by solvent method, and the PEGS/ß-TCP/MZG membrane was fabricated and compared with PEGS/ß-TCP and MZG to examine the morphology, composition, and hydrophilicity. The amount of magnesium ions released and the pH value of the materials were tested after 3 days of immersion. The cell viability and osteogenic differentiation of MC3T3 cells induced by extract medium were investigated by CCK-8 assay, ALP and mineralized nodule staining. The cell viability and polarization of RAW cells induced by extract medium were then investigated. The expression of macrophage-secreted cytokines was examined by PCR analysis. GraphPad Prism 9.0 software package was used for statistical analysis. RESULTS: PEGS/ß-TCP/MZG membranes with PEGS/ß-TCP coating tightly embedded with MZG were successfully fabricated, and the material had good hydrophilicity. The results of degradation experiments indicated that the PEGS/ß-TCP coating effectively slowed down the degradation rate of MZG, leading to a lower pH value and concentration of Mg2+ ion in the extract medium of PEGS/ß-TCP/MZG group. The results of in vitro cell experiments showed that PEGS/ß-TCP/MZG had no significant effect on the proliferation activity of both MC3T3-E1 and macrophages. PEGS/ß-TCP/MZG significantly enhanced the expression of ALP and mineralized nodule staining in MC3T3-E1. Although there was no significant difference in macrophage polarization pattern between PEGS/ß-TCP and PEGS/ß-TCP/MZG groups, PEGS/ß-TCP/MZG further reduced inflammation based on the immunomodulation of PEGS/ß-TCP coating related TNF-α expression and increased osteogenesis related TGF-ß expression. CONCLUSIONS: MZG membrane modified by PEGS/ß-TCP may provide a new material option for the development of bone tissue engineering.

Integrating Virtual Surgical Planning and 3D-Printed Tools with Iliac Bone Grafts for Orbital and Zygomatic Reconstruction in Hemifacial Microsomia Patients.

Hemifacial Microsomia (HFM) is the second most common congenital craniofacial malformation syndrome, and the complexity of HFM makes its treatment challenging. The present study aimed to introduce a new approach of utilization of virtual surgical planning (VSP) and 3D-printed surgical adjuncts for maxillofacial reconstruction. Five HFM patients were included in this study. All participants were provided with a full VSP, including the design of osteotomy lines, the design and fabrication of 3D-printed cutting guides, fixation plates, and titanium mesh for implantation. With the assistance of 3D-printed cutting guides and fixation plates, the orbital deformities were corrected, and a 3D-printed titanium mesh combined with iliac cancellous bone graft was applied to reconstruct the zygomatic arch. The surgical accuracy, effectiveness, and bone absorption rate were evaluated. All patients completed the entirely digital treatment process without experiencing severe complications. The surgical adjuncts were effective in aligning the movement of the bone segments with the surgical plan, resulting in mean 3D deviations (1.0681 ± 0.15 mm) and maximum 3D deviations (3.1127 ± 0.44 mm). The image fusion results showed that the patients' postoperative position of the maxilla, zygoma, and orbital rim was consistent with the virtual surgical plan, with only a slight increase in the area of bone grafting. The postoperative measurements showed significant improvement in the asymmetry indices of Er (AI of Er: from 17.91 ± 3.732 to 5.427 ± 1.389 mm, p = 0.0001) and FZ (AI of FZ: from 7.581 ± 1.435 to 4.070 ± 1.028 mm, p = 0.0009) points. In addition, the observed bone resorption rate at the 6-month follow-up across the five patients was 45.24% ± 3.13%. In conclusion, the application of VSP and 3D-printed surgical adjuncts demonstrates significant value in enhancing the precision and effectiveness of surgical treatments for HFM. A 3D-printed titanium mesh combined with iliac cancellous bone graft can be considered an ideal alternative for the reconstruction of the zygomatic arch.

Search for Dark-Matter-Nucleon Interactions with a Dark Mediator in PandaX-4T.

We report results of a search for dark-matter-nucleon interactions via a dark mediator using optimized low-energy data from the PandaX-4T liquid xenon experiment. With the ionization-signal-only data and utilizing the Migdal effect, we set the most stringent limits on the cross section for dark matter masses ranging from 30 MeV/c^{2} to 2 GeV/c^{2}. Under the assumption that the dark mediator is a dark photon that decays into scalar dark matter pairs in the early Universe, we rule out significant parameter space of such thermal relic dark-matter model.

Three-dimensional printed titanium mesh combined with iliac cancellous bone in the reconstruction of mandibular defects secondary to ameloblastoma resection.

BACKGROUND: The reconstruction of large mandibular defects is a challenge, and free vascularized bone flaps are most commonly used. However, the precision and symmetry of this repair are deficient, and patients have a risk of vascular embolism, flap necrosis, and donor site complications. Therefore, to explore an ideal alternative in mandibular reconstruction with high surgical accuracy and low complications is indispensable. METHODS: Seven patients with recurrent or large-scope ameloblastoma were enrolled in this study. All patients were provided with a fully digital treatment plan, including the design of osteotomy lines, surgical guides, and three-dimensional printed titanium mesh for implantation. With the assistance of surgical guide, ameloblastomas were resected, and custom 3D printed titanium mesh combined with posterior iliac bone harvest was used in mandibular reconstruction. A comparison was made between the discrepant surgical outcomes and the intended surgical plan, as well as the average three-dimensional deviation of the mandible before and after the surgery. At the same time, the resorption rate of the implanted bone was evaluated. RESULTS: All patients completed the fully digital treatment process successfully without severe complications. Image fusion showed that the postoperative contour of the mandible was basically consistent with surgical planning, except for a slight increase in the inferior border of the affected side. The mean three-dimensional deviation of the mandible between the preoperative and postoperative periods was 0.78 ± 0.41 mm. The mean error between the intraoperative bone volume and the digital planning bone volume was 2.44%±2.10%. Furthermore, the bone resorption rates of the harvested graft 6 months later were 32.15%±6.95%. CONCLUSIONS: The use of digital surgical planning and 3D-printed templates can assist surgeons in performing surgery precisely, and the 3D-printed titanium mesh implant can improve the patient's facial symmetry. 3D printed titanium mesh combined with posterior iliac cancellous bone graft can be regarded as an ideal alternative in extensive mandibular reconstruction.

Search for Light Dark Matter from the Atmosphere in PandaX-4T.

We report a search for light dark matter produced through the cascading decay of η mesons, which are created as a result of inelastic collisions between cosmic rays and Earth's atmosphere. We introduce a new and general framework, publicly accessible, designed to address boosted dark matter specifically, with which a full and dedicated simulation including both elastic and quasielastic processes of Earth attenuation effect on the dark matter particles arriving at the detector is performed. In the PandaX-4T commissioning data of 0.63 tonne·year exposure, no significant excess over background is observed. The first constraints on the interaction between light dark matter generated in the atmosphere and nucleus through a light scalar mediator are obtained. The lowest excluded cross section is set at 5.9×10^{-37} cm^{2} for a dark matter mass of 0.1 MeV/c^{2} and mediator mass of 300 MeV/c^{2}. The lowest upper limit of η to the dark matter decay branching ratio is 1.6×10^{-7}.

The Reliability of Three-Dimensional Landmark-Based Craniomaxillofacial and Airway Cephalometric Analysis.

Cephalometric analysis is a standard diagnostic tool in orthodontics and craniofacial surgery. Today, as conventional 2D cephalometry is limited and susceptible to analysis bias, a more reliable and user-friendly three-dimensional system that includes hard tissue, soft tissue, and airways is demanded in clinical practice. We launched our study to develop such a system based on CT data and landmarks. This study aims to determine whether the data labeled through our process is highly qualified and whether the soft tissue and airway data derived from CT scans are reliable. We enrolled 15 patients (seven males, eight females, 26.47 ± 3.44 years old) diagnosed with either non-syndromic dento-maxillofacial deformities or OSDB in this study to evaluate the intra- and inter-examiner reliability of our system. A total of 126 landmarks were adopted and divided into five sets by region: 28 cranial points, 25 mandibular points, 20 teeth points, 48 soft tissue points, and 6 airway points. All the landmarks were labeled by two experienced clinical practitioners, either of whom had labeled all the data twice at least one month apart. Furthermore, 78 parameters of three sets were calculated in this study: 42 skeletal parameters (23 angular and 19 linear), 27 soft tissue parameters (9 angular and 18 linear), and 9 upper airway parameters (2 linear, 4 areal, and 3 voluminal). Intraclass correlation coefficient (ICC) was used to evaluate the inter-examiner and intra-examiner reliability of landmark coordinate values and measurement parameters. The overwhelming majority of the landmarks showed excellent intra- and inter-examiner reliability. For skeletal parameters, angular parameters indicated better reliability, while linear parameters performed better for soft tissue parameters. The intra- and inter-examiner ICCs of airway parameters referred to excellent reliability. In summary, the data labeled through our process are qualified, and the soft tissue and airway data derived from CT scans are reliable. Landmarks that are not commonly used in clinical practice may require additional attention while labeling as they are prone to poor reliability. Measurement parameters with values close to 0 tend to have low reliability. We believe this three-dimensional cephalometric system would reach clinical application.

Search for Light Dark Matter with Ionization Signals in the PandaX-4T Experiment.

We report the search results of light dark matter through its interactions with shell electrons and nuclei, using the commissioning data from the PandaX-4T liquid xenon detector. Low energy events are selected to have an ionization-only signal between 60 to 200 photoelectrons, corresponding to a mean nuclear recoil energy from 0.77 to 2.54 keV and electronic recoil energy from 0.07 to 0.23 keV. With an effective exposure of 0.55 tonne·year, we set the most stringent limits within a mass range from 40 MeV/c^{2} to 10 GeV/c^{2} for pointlike dark matter-electron interaction, 100 MeV/c^{2} to 10 GeV/c^{2} for dark matter-electron interaction via a light mediator, and 3.2 to 4 GeV/c^{2} for dark matter-nucleon spin-independent interaction. For DM interaction with electrons, our limits are closing in on the parameter space predicted by the freeze-in and freeze-out mechanisms in the early Universe.

Evaluation of optimal single-photon emission computed tomography reference value and three-dimensional mandibular growth pattern in 54 Chinese unilateral condylar hyperplasia patients.

BACKGROUND: The research aimed to evaluate the optimal Single-Photon Emission Computed Tomography (SPECT) cut-off value in differentiating condylar growth activeness, to observe 3-dimensional (3D) mandibular growth pattern, and to explore the potential correlation between 3D measurement parameters and SPECT uptake ratios in Chinese unilateral condylar hyperplasia (UCH) patients. METHODS:  Data of fifty-four Chinese UCH patients were analyzed retrospectively. All patients underwent SPECT within 1 month before or after the first CT examination (CT1); and received a second CT examination at least 12 months later (CT2). Data from CT scans were analyzed by comparing bilateral differences between CT1 and CT2. The sensitivity and specificity of SPECT were calculated by the receiver operating characteristic (ROC) curve. Pearson's correlation analysis was performed to investigate whether the mandibular growth was correlated with SPECT value. RESULTS: SPECT had a sensitivity of 68.00% and a specificity of 72.41%, with an area under the ROC curve being 0.709. The optimal SPECT cut-off value for evaluating condylar activity has been determined to be 13%. In patients with an active growing condyle, there was a significant increase in Co-Gn and Co-Go, but not in Go-Gn, Go-MF, or MF-Gn. Pearson's correlation analysis revealed no correlation between 3D measurement parameters and differences in relative condylar uptake ratios. CONCLUSION: SPECT showed good diagnostic performance in UCH with the cut-off value of 13%. For those with an active growing condyle, the mandible grows diagonally and vertically, while the relative condylar uptake ratio was not directly related to mandibular growth.

3D doppler ultrasound imaging of cerebral blood flow for assessment of neonatal hypoxic-ischemic brain injury in mice.

Cerebral blood flow (CBF) acutely reduces in neonatal hypoxic-ischemic encephalopathy (HIE). Clinic studies have reported that severe CBF impairment can predict HIE outcomes in neonates. Herein, the present study uses a non-invasive 3D ultrasound imaging approach to evaluate the changes of CBF after HI insult, and explores the correlation between CBF alterations and HI-induced brain infarct in mouse pups. The neonatal HI brain injury was induced in postnatal day 7 mouse pups using the Rice-Vannucci model. Non-invasive 3D ultrasound imaging was conducted to image CBF changes with multiple frequencies on mouse pups before common carotid artery (CCA) ligation, immediately after ligation, and 0 or 24 hours after HI. Vascularity ratio of the ipsilateral hemisphere was acutely reduced after unilateral ligation of the CCA alone or in combination with hypoxia, and partially restored at 24 hours after HI. Moreover, regression analysis showed that the vascularity ratio of ipsilateral hemisphere was moderately correlated with brain infarct size 24 hours after HI, indicating that CBF reduction contributes to of HI brain injury. To further verify the association between CBF and HI-induced brain injury, a neuropeptide C-type natriuretic peptide (CNP) or PBS was intranasally administrated to the brain of mouse pups one hour after HI insult. Brain infarction, CBF imaging and long-term neurobehavioral tests were conducted. The result showed that intranasal administration of CNP preserved ipsilateral CBF, reduced the infarct size, and improved neurological function after HI brain injury. Our findings suggest that CBF alteration is an indicator for neonatal HI brain injury, and 3D ultrasound imaging is a useful non-invasive approach for assessment of HI brain injury in mouse model.

Precision sirolimus dosing in children: The potential for model-informed dosing and novel drug monitoring.

The mTOR inhibitor sirolimus is prescribed to treat children with varying diseases, ranging from vascular anomalies to sporadic lymphangioleiomyomatosis to transplantation (solid organ or hematopoietic cell). Precision dosing of sirolimus using therapeutic drug monitoring (TDM) of sirolimus concentrations in whole blood drawn at the trough (before the next dose) time-point is the current standard of care. For sirolimus, trough concentrations are only modestly correlated with the area under the curve, with R 2 values ranging from 0.52 to 0.84. Thus, it should not be surprising, even with the use of sirolimus TDM, that patients treated with sirolimus have variable pharmacokinetics, toxicity, and effectiveness. Model-informed precision dosing (MIPD) will be beneficial and should be implemented. The data do not suggest dried blood spots point-of-care sampling of sirolimus concentrations for precision dosing of sirolimus. Future research on precision dosing of sirolimus should focus on pharmacogenomic and pharmacometabolomic tools to predict sirolimus pharmacokinetics and wearables for point-of-care quantitation and MIPD.

MicroRNA-210 Downregulates TET2 (Ten-Eleven Translocation Methylcytosine Dioxygenase 2) and Contributes to Neuroinflammation in Ischemic Stroke of Adult Mice.

BACKGROUND: Stroke is a leading cause of morbidity and mortality worldwide. Neuroinflammation plays a key role in acute brain injury of ischemic stroke. MicroRNA-210 (miR210) is the master hypoxamir and regulates microglial activation and inflammation in a variety of diseases. In this study, we uncovered the mechanism of miR210 in orchestrating ischemic stroke-induced neuroinflammation through repression of TET2 (ten-eleven translocation methylcytosine dioxygenase 2) in the adult mouse brain. METHODS: Ischemic stroke was induced in adult WT (wild type) or miR210 KO (miR210 deficient) mice by transient intraluminal middle cerebral artery occlusion. Injection of TET2 silencing RNA or miR210 complementary locked nucleic acid oligonucleotides, or miR210 KO mice were used to validate miR210-TET2 axis and its role in ischemic brain injury. Furthermore, the effect of TET2 overexpression on miR210-stimulated proinflammatory cytokines was examined in BV2 microglia. Post assays included magnetic resonance imaging scan for brain infarct size; neurobehavioral tests, reverse transcription-quantitative polymerase chain reaction, and Western blot for miR210; and TET2 levels, flow cytometry, and ELISA for neuroinflammation in the brain after stroke or microglia in vitro. RESULTS: miR210 injection significantly reduced TET2 protein abundance in the brain, while miR210 complementary locked nucleic acid oligonucleotides or miR210 KO preserved TET2 regardless of ischemic brain injury. TET2 knockdown reversed the protective effects of miR210 inhibition or miR210 KO on ischemic stroke-induced brain infarct size and neurobehavioral deficits. Moreover, flow cytometry and ELISA assays showed that TET2 knockdown also significantly dampened the anti-inflammatory effect of miR210 inhibition on microglial activation and IL (interleukin)-6 release after stroke. In addition, overexpression of TET2 in BV2 microglia counteracted miR210-induced increase in cytokines. CONCLUSIONS: miR210 inhibition reduced ischemic stroke-induced neuroinflammatory response via repression of TET2 in the adult mouse brain, suggesting that miR210 is a potential treatment target for acute brain injury after ischemic stroke.

Search for Solar

A search for interactions from solar ^{8}B neutrinos elastically scattering off xenon nuclei using PandaX-4T commissioning data is reported. The energy threshold of this search is further lowered compared with the previous search for dark matter, with various techniques utilized to suppress the background that emerges from data with the lowered threshold. A blind analysis is performed on the data with an effective exposure of 0.48 tonne year, and no significant excess of events is observed. Among the results obtained using the neutrino-nucleus coherent scattering, our results give the best constraint on the solar ^{8}B neutrino flux. We further provide a more stringent limit on the cross section between dark matter and nucleon in the mass range from 3 to 9 GeV/c^{2}.

The strategy of composite grafting with BMP2-Loaded calcium phosphate cements and autogenous bone for alveolar cleft reconstruction.

Purpose: To remedy the drawbacks of traditional autogenous bone harvesting in alveolar bone grafting (ABG), a novel strategy of composite grafting with BMP2-loaded calcium phosphate cements (BMP2-CPC) and autogenous bone harvested by minimally invasive technique was developed and evaluated for its bone-repairing efficacy. Materials and methods: A chart review was conducted for 19 patients with unilateral alveolar clefts who underwent secondary ABG from 2017 to 2020. Of the enrolled patients, 9 patients underwent grafting with autogenous bone harvested by traditional trap door technique (group I), and 10 patients underwent grafting with the composite graft comprising BMP2-CPC and autogenous bone harvested by minimally invasive technique at a ratio of 1:1 by volume (group II). The clinical performance of the composite graft was comprehensively evaluated in terms of clinical, radiographic and histological perspectives. Results: The present results demonstrated that the composite graft exhibited satisfactory bone-repairing efficacy comparable to that of the autogenous bone graft on the premise of lower amount of harvested bone. The post-surgical resorption of bone volume and vertical height of grafted area was significantly slower in group II. The favourable resorption performance of BMP2-CPC contributed to preserving the post-surgical bony contour reconstructed with the composite graft. Conclusion: The composite graft comprising BMP2-CPC and autogenous bone harvested by minimally invasive technique was demonstrated to be an eligible alternative for application in ABG, especially for its improved resorption performance in preserving post-surgical bony contour.

First Search for the Absorption of Fermionic Dark Matter with the PandaX-4T Experiment.

Compared with the signature of dark matter elastic scattering off nuclei, the absorption of fermionic dark matter by nuclei opens up a new searching channel for light dark matter with a characteristic monoenergetic signal. In this Letter, we explore the 95.0-day data from the PandaX-4T commissioning run and report the first dedicated searching results of the fermionic dark matter absorption signal through a neutral current process. No significant signal was found, and the lowest limit on the dark matter-nucleon interaction cross section is set to be 1.5×10^{-50} cm^{2} for a fermionic dark matter mass of 40 MeV/c^{2} with 90% confidence level.

Search for Light Fermionic Dark Matter Absorption on Electrons in PandaX-4T.

We report a search on sub-MeV fermionic dark matter absorbed by electrons with an outgoing active neutrino using the 0.63 tonne year exposure collected by the PandaX-4T liquid xenon experiment. No significant signals are observed over the expected background. The data are interpreted into limits to the effective couplings between such dark matter and the electron. For axial-vector or vector interactions, our sensitivity is competitive in comparison to existing astrophysical bounds on the decay of such a dark matter candidate into photon final states. In particular, we present the first direct detection limits for a vector (axial-vector) interaction which are the strongest in the mass range from 35 to 55 (25 to 45) keV/c^{2} in comparison to other astrophysical and cosmological constraints.

Osteoclast-Driven Osteogenesis, Bone Remodeling and Biomaterial Resorption: A New Profile of BMP2-CPC-Induced Alveolar Bone Regeneration.

This bedside-to-bench study aimed to systematically investigate the value of applying BMP2-loaded calcium phosphate cement (BMP2-CPC) in the restoration of large-scale alveolar bone defects. Compared to deproteinized bovine bone (DBB), BMP2-CPC was shown to be capable of inducing a favorable pattern of bone regeneration and bone remodeling accompanied by active osteoclastogenesis and optimized biomaterial resorption when applied in reconstructive periodontally accelerated osteogenic orthodontics (PAOO) surgery. To verify the regulatory role of osteoclasts in the BMP2-CPC-induced pattern of bone regeneration, in vitro and in vivo studies were designed to elucidate the underlying mechanism. Our results revealed that osteoclasts played a multifaceted role (facilitating osteogenesis, bone remodeling and biomaterial resorption) in the BMP2-CPC-induced bone regeneration. Osteoclasts contributed to the osteogenic differentiation of mesenchymal stem cells (MSCs) by secreting calcium ions, CTHRC1 and PDGF-B. Moreover, the increased osteoclasts promoted the remodeling of new bone and BMP2-CPC resorption, leading to a harmonized replacement of biomaterials with mature bone. In conclusion, the in vitro and in vivo experimental results corresponded with the clinical results and showed the optimized properties of BMP2-CPC in activating osteoclast-driven bone regeneration and remodeling, thus indicating the highly promising prospects of BMP2-CPC as an ideal therapeutic for alveolar bone defects.