On the phenomena of partial crystallization of highly undercooled magnesium silicate molten droplets.

The present work reports real-time observations of the phenomena of partial crystallization of one of the glass-forming materials, namely enstatite (MgSiO3) from its supercooled liquid droplet. Initially, the molten droplet has been held under purely non-contact conditions using the aerodynamic levitation technique. The desired levels of undercooling have been achieved by deliberately making the levitated molten droplet touch a thin molybdenum wire and hence to initiate heterogeneous nucleation from the point of contact. Influence of thermal parameters like undercooling, cooling rates and recalescence on the process of crystallization is investigated. To understand and report the morphological properties and extent of crystallinity, the solidified enstatite samples have been characterized using optical/scanning electron microscopy (SEM) and X-ray diffraction (XRD) respectively, which confirmed the formation of partially crystallized enstatite spherules and fully glass spherules. XRD showed sharp peaks of enstatite, which confirm crystallinity and a halo profile confirms the amorphous phase of enstatite. Based on the observations of several experiments, we propose the effect of thermal parameters such as levels of undercooling and recalescence on the partial crystallization, as well as partial glass formation from the initially molten droplets of enstatite composition.

Understanding the Oral Absorption of Irbesartan Using Biorelevant Dissolution Testing and PBPK Modeling.

Poorly soluble weak bases form a significant proportion of the drugs available in the market thereby making it imperative to understand their absorption behavior. This work aims to mechanistically understand the oral absorption behavior for a weakly basic drug, Irbesartan (IRB), by investigating its pH dependent solubility, supersaturation, and precipitation behavior. Simulations performed using the equilibrium solubility could not accurately predict oral absorption. A multi-compartmental biorelevant dissolution testing model was used to evaluate dissolution in the stomach and duodenal compartment and mimic oral drug administration. This model exhibited sustained intestinal supersaturation (2-4-fold) even upon varying flow rates (4 mL/min, 7 mL/min, and mono-exponential transfer) from gastric to intestinal compartment. Simulation of oral absorption using GastroPlus™ and dissolution data collectively predicted plasma exposure with higher accuracy (% prediction error values within ± 15%), thereby indicating that multi-compartment dissolution testing enabled an improved prediction for oral pharmacokinetics of Irbesartan. Additionally, precipitates obtained in the intestinal compartment were characterized to determine the factors underlying intestinal supersaturation of Irbesartan. The solid form of these precipitates was amorphous with considerable particle size reduction. This indicated that following gastric transit, precipitate formation in the amorphous form coupled with an approximately 10 times particle size reduction could be potential factors leading to the generation and sustenance of intestinal drug supersaturation.

Assessment of Biopharmaceutical Performance of Supersaturating Formulations of Carbamazepine in Rats Using Physiologically Based Pharmacokinetic Modeling.

There is an overgrowing emphasis on supersaturating drug delivery systems (SDDS) with increase in number of poorly water-soluble compounds. However, biopharmaceutical performance from these formulations is limited by phase transformation to stable crystalline form due to their high-energy physical form. In the present study, in vitro kinetic solubility in water and dissolution in biorelevant medium integrated with in silico physiologically based pharmacokinetic (PBPK) modeling was used to predict biopharmaceutical performance of SDDS of poorly water-soluble compound, carbamazepine (CBZ). GastroPlus™ with advanced compartmental absorption and transit model was used as a simulation tool for the study. Wherein, the model was developed using physicochemical properties of CBZ and disposition parameters obtained after intravenous administration of CBZ (20 mg/kg) into Sprague-Dawley (SD) rats. Biorelevant medium was selected by screening different dissolution media for their capability to predict oral plasma concentration-time profile of marketed formulation of CBZ. In vivo performance of SDDS was predicted with the developed model and compared to observed plasma concentration-time profile obtained after oral administration of SDDS into SD rats (20 mg/kg). The predictions, with strategy of using kinetic solubility and dissolution in the selected biorelevant medium, were consistent with observed biopharmaceutical performance of SDDS. Additionally, phase transformation of CBZ during gastrointestinal transit of formulations was evaluated and correlated with in vivo dissolution deconvoluted by Loo-Reigelman analysis.

NanoCrySP technology for generation of drug nanocrystals: translational aspects and business potential.

Drug nanocrystals have rapidly evolved into a mature drug delivery strategy in the last decade, with almost 16 products currently on the market. Several "top-down" technologies are available in the market for generation of nanocrystals. Despite several advantages, very few bottom-up technologies have been explored for commercial purpose. This short communication highlights a novel, bottom-up, spray drying based technology-NanoCrySP-to generate drug nanocrystals. Nanocrystals are generated in the presence of non-polymeric excipients that act as crystallization inducer for the drug. Excipients encourage crystallization of drug by plasticization, primary heterogeneous nucleation, and imparting physical barrier to crystal growth. Nanocrystals have shown significant improvement in dissolution and thereby oral bioavailability. NanoCrySP technology is protected through patents in India, the USA, and the European Union. NanoCrySP can be utilized for (i) pharmaceutical development of new chemical entities, (ii) differentiated products of existing molecules, and (iii) generic drug products. The aggregation of drug nanocrystals generated using NanoCrySP poses significant challenges in the nanocrystal-based product development. Addition of stabilizers either during spray drying or during dissolution has shown beneficial effects.

Mechanism of generation of drug nanocrystals in celecoxib: mannitol nanocrystalline solid dispersion.

Objective of this work was to understand the mechanism of formation of celecoxib nanocrystals in celecoxib: mannitol nanocrystalline solid dispersion (NSD). Solution of celecoxib and mannitol was spray dried in 1:1 (g:g) proportion to obtain NSD, with average crystallite size of 214.07 ± 45.27 nm. Solubility parameters of celecoxib and mannitol were 23.1 MPa(1/2) and 38.5 MPa(1/2), respectively, hinting their immiscibility. Formation of nanocrystals during NanoCrySP proceeds via intermediate amorphous form of the drug. Earlier work from our lab on hesperetin-mannitol system, had underlined the role of plasticization of amorphous drug by excipient in the formation of nanocrystals. However, in present case, mannitol failed to plasticize amorphous celecoxib and Tg of amorphous celecoxib (56.8°C) showed a negligible change (54.8°C) in presence of mannitol. However, DSC data also suggested crystallization inducing potential of mannitol on amorphous celecoxib. Polarized light microscopy provided evidence that, mannitol facilitated heterogeneous nucleation of amorphous celecoxib at their interface. Transmission electron microscopy analysis suggested that, mannitol acted as a physical barrier to crystal growth of celecoxib crystallites. Thus, though mannitol did not plasticize amorphous celecoxib, it aided in nanocrystal generation by heterogeneous nucleation and providing physical barrier to crystal growth.

Effect of Mannitol on Nucleation and Crystal Growth of Amorphous Flavonoids: Implications on the Formation of Nanocrystalline Solid Dispersion.

In this work, we studied crystallization kinetics of amorphous hesperetin (HRN) and naringenin (NRN) alone, and in 1:1 proportion with mannitol at Tg + 15 K. Crystallization rate of NRN was found to be significantly higher than HRN. Mannitol accelerated crystallization of HRN as well as NRN. NRN exhibited higher crystallization rate than HRN, in presence of mannitol, as well. Finke-Watzky model was used to deconvolute the crystallization kinetics data into nucleation and crystal growth rate constant. HRN alone had 9.56 × 10(9) times faster nucleation rate and 1.88 times slower crystal growth than NRN alone. Mannitol increased nucleation and crystal growth rate of HRN as well as NRN. In presence of mannitol, HRN possessed 1.34 × 10(10) times faster nucleation rate and 1.70 times slower crystal growth rate than NRN. Differences in crystallization behavior of HRN and NRN were explained by their thermodynamic properties.

Oral bioavailability and pharmacodynamic activity of hesperetin nanocrystals generated using a novel bottom-up technology.

In the present study, nanocrystalline solid dispersion (NSD) was developed to enhance the release rate and oral bioavailability of hesperetin (HRN). NSD of HRN was prepared using a novel bottom-up technology platform. It is a spray drying based technology to generate solid particles, containing drug nanocrystals dispersed in small molecule excipients. HRN and mannitol were used in a 5:5 ratio, and an average crystallite size of HRN in NSD with mannitol was found to be 137.3 ± 90.0 nm. An in vitro release study revealed a statistically significant release rate enhancement for HRN nanocrystals (46.3 µg/mL/min) as compared to that of the control (29.5 µg/mL/min). Further, a comparative oral bioavailability study of NSD and control in Sprague-Dawley rats established significant improvement in Cmax and oral bioavailability (AUC0-∞) by 1.79- and 2.25-fold, respectively, for HRN nanocrystals. The findings of oral bioavailability were corroborated by intestinal uptake and Caco-2 cell uptake studies, wherein HRN, when administered in nanocrystalline form, showed higher penetration in intestinal mucosa and higher uptake in Caco-2 cells. Finally, the therapeutic efficacy of HRN nanocrystals was tested by a reactive oxygen species (ROS) generation assay and carrageenan induced anti-inflammatory model. HRN nanocrystals markedly inhibited ROS generation in MCF-7 cells, and carrageenan induced inflammation in rats. The process of NSD formation was found to be based on classical nucleation theory wherein mannitol contributed to NSD formation by acting as a plasticizer and crystallization inducer, and by providing sites for heterogeneous nucleation/crystallization.

Emerging potential of citrus flavanones as an antioxidant in diabetes and its complications.

A proper balance between oxidants and antioxidants is necessary in maintaining health and longevity. Alterations in this balance may result in oxidative stress causing functional disorders and diseases. Oxidative stress is considered to play a vital role in the pathogenesis of diabetes and its complications. Flavanones and flavanones-rich botanical extracts have been a subject of great interest for scientific research. Citrus flavanones like naringin and hesperidin exert a variety of biological activities such as anti-oxidant, anti-inflammatory, antihyperglycemic, anti-apoptotic etc. Naringin and hesperidin along with their respective aglycones, naringenin and hesperetin have been shown to attenuate diabetes and its related complications. This review discusses the role of flavanones as a possible emerging treatment for diabetes and its complications along with the possible mechanistic explanations.

Effect of different "states" of sorbed water on amorphous celecoxib.

Glass transition temperature (Tg) of an amorphous drug is a vital physical phenomenon that influences its visco-elastic properties, physical, and chemical stability. Water acts as a plasticizer for amorphous drugs thus increasing their recrystallization kinetics. This reduces the solubility advantage of an amorphous drug. Hence, there is an interest in understanding the relationship between water content and Tg of amorphous drug. We have studied the effect of "state" of sorbed water on Tg of amorphous celecoxib (ACLB). ACLB was allowed to sorb water at relative humidity of 33%, 53%, 75%, and 93%. ALCB showed biphasic sorption of water designated as "bound" and "solvent-like" state of water associated with ACLB. Molecular modeling studies provided deeper insights into the interaction of water with ACLB. A distinct co-relationship between the state of water and its plasticization capacity was observed. Bound state of water had a very profound effect on the fall in experimentally observed Tg (T(g-exp)) value. Solvent-like state of water had little impact on T(g-exp) value. Tg of ACLB-water mixture was predicted by Gordon-Taylor equation (T(g-pre)). The deviations in T(g-exp) and Tg-pre were correlated to volume non-additivity and non-ideal mixing. This study has implications on the development of formulations based on amorphous forms.

Molecular relaxation behavior and isothermal crystallization above glass transition temperature of amorphous hesperetin.

The purpose of this paper was to investigate the relaxation behavior of amorphous hesperetin (HRN), using dielectric spectroscopy, and assessment of its crystallization kinetics above glass transition temperature (Tg ). Amorphous HRN exhibited both local (ß-) and global (α-) relaxations. ß-Relaxation was observed below Tg , whereas α-relaxation prominently emerged above Tg . ß-Relaxation was found to be of Johari-Goldstein type and was correlated with α-process by coupling model. Secondly, isothermal crystallization experiments were performed at 363 K (Tg + 16.5 K), 373 K (Tg + 26.5 K), and 383 K (Tg + 36.5 K). The kinetics of crystallization, obtained from the normalized dielectric strength, was modeled using the Avrami model. Havriliak-Negami (HN) shape parameters, αHN and αHN .ßHN , were analyzed during the course of crystallization to understand the dynamics of amorphous phase during the emergence of crystallites. HN shape parameters indicated that long range (α-like) were motions affected to a greater extent than short range (ß-like) motions during isothermal crystallization studies at all temperature conditions. The variable behavior of α-like motions at different isothermal crystallization temperatures was attributed to evolving crystallites with time and increase in electrical conductivity with temperature.

Differential surface properties of commercial crystalline telmisartan samples.

The aim of the present study was to investigate differences in surface chemistry of commercially available telmisartan (TMS) samples in Indian market and to correlate them to the surface molecular environment. Comprehensive characterization of material properties of four TMS samples from different sources showed that all samples exhibited same polymorphic form, but different particle shape, particle size distribution, surface energetics and surface chemistry. Wettability and surface free energy were determined using sessile drop contact angle technique. TMS samples exhibited significant variations in their wetting behavior. The role of crystal shape, particle size distribution, surface energetics and surface chemistry in controlling TMS powder wettability was collectively explored by contact angle experiments. Evaluation of work of adhesion (Wa), immersion (Wi) and spreading (Ws) indicated that samples had differential wetting behavior. The surface chemistry was elucidated by X-ray photoelectron spectroscopy (XPS). The surface polarity index was determined by XPS and expressed as (oxygen+nitrogen)-to-(carbon) atomic concentration ratio. It was found to be different for all four TMS samples. Crystal morphology of TMS polymorph A was predicted using Bravais-Friedel Donnay-Harker (BFDH) method. Molecular lipophilic surface potential (MLSP) data for TMS showed the varied surface lipophilic environment throughout the molecule. Hence it can be concluded that the differential abundance of surface elements play an important role in controlling the biopharmaceutical performance of TMS powder samples.

Phase behavior and oral bioavailability of amorphous Curcumin.

Amorphous form has been used as a means to improve aqueous solubility and oral bioavailability of poorly water soluble drugs. The objective of present study was to characterize thermodynamic and kinetic parameters of amorphous form of Curcumin (CRM-A). CRM-A was found to be a good glass former with glass transition temperature (T(g)) of 342.64K and critical cooling rate below 1K/min. CRM-A had a moderate tendency of crystallization and exhibited Kauzmann temperature (T(KS)) of 294.23 K. CRM-A was found to be fragile in nature as determined by T(m)/T(g) (1.32), C(p)(1 iq):C(p)(glass) (1.22), strength parameter (D<10), fragility index (m>75), T(K)/T(g) (0.85), and T(g)-T(K) (48.41). Theoretically predicted aqueous solubility advantage of 43.15-folds, was reduced to 17-folds under practical conditions. This reduction in solubility was attributed to water induced devitrification, as evident through PXRD and SEM analysis. Further, oral bioavailability study of CRM-A was undertaken to investigate bioavailability benefits, if any. C(max) was improved by 1.97-folds (statistically significant difference over control). However, oral bioavailability (AUC(0-)(∞)) was improved by 1.45-folds (statistically non significant difference over control). These observations pointed towards role of rapid devitrification of CRM-A in GIT milieu, thus limiting its oral bioavailability advantage.

Solid state characterization of commercial crystalline and amorphous atorvastatin calcium samples.

Atorvastatin calcium (ATC), an anti-lipid BCS class II drug, is marketed in crystalline and amorphous solid forms. The objective of this study was to perform solid state characterization of commercial crystalline and amorphous ATC drug samples available in the Indian market. Six samples each of crystalline and amorphous ATC were characterized using X-ray powder diffractometry (XRPD), differential scanning calorimetry (DSC), thermogravimetric analysis, Karl Fisher titrimetry, microscopy (hot stage microscopy, scanning electron microscopy), contact angle, and intrinsic dissolution rate (IDR). All crystalline ATC samples were found to be stable form I, however one sample possessed polymorphic impurity, evidenced in XRPD and DSC analysis. Amongst the amorphous ATC samples, XRPD demonstrated five samples to be amorphous 'form 27', while, one matched amorphous 'form 23'. Thermal behavior of amorphous ATC samples was compared to amorphous ATC generated by melt quenching in DSC. ATC was found to be an excellent glass former with T(g)/T(m) of 0.95. Residual crystallinity was detected in two of the amorphous samples by complementary use of conventional and modulated DSC techniques. The wettability and IDR of all amorphous samples was found to be higher than the crystalline samples. In conclusion, commercial ATC samples exhibited diverse solid state behavior that can impact the performance and stability of the dosage forms.